Lock language in the tp/R3trans

Hello,
I'm installing the french in my system. During the transport I got a
problem with a filesystem. It became 100 % used so one of the transport
failed.
I have extend the tablespaces and now we have free space, but:
When I try to "Restart" I get the following error message: Language
locked, you cannot perform this action.
The SAP recommends the following procedure: "In rare cases (for
example, if the system or a program crashes), a lock may remain, even
though no action is active.
If this is the case, you must remove the lock manually. To do this, use
Transaction SM12 and search for locks on the table T002C. Make sure
that no action is active before you remove the lock. To view the
language transport actions, go to the Transaction SM37 and search for
jobs that start with the prefix SAP-LANGUAGE"
I checked the job is not active under SM37. However I cannot find the
lock for table T002C under SM12.
Moreover there is any job running. And in the log I have :
Control passed to tp/R3trans (see long text)
I have executed this transport manually an it finished ok, but the rest
doesn't go on,
Do you know a way to unlock the language in order to restart
the import process or to go on with the installation?
I hope you can help us as soon as possible. It's quite urgent. We need
to have French installed as soon as possible.
Thank you very much in advance and kind regards,
José

Hello Andreu,
I had the same situation when I was installing Traditional Chinese Language.
Exit / Logout from all sessions of the particular user.
Delete all lock entires for that user (if any)
Re-login and restart your activity
It worked for me. Hope, the it works with you too.
Regards,
Ammey Kesarkar

Similar Messages

How can I unlock my ipod touch? The screen is locked and has various languages on the sliding bar. It wont let you touch it

how can I unlock my ipod touch? The screen is locked and has various languages on the sliding bar. the screen is grey and the normal screen saver is gone.

As a first attempt, try a reboot by holding both the power and home buttons untl the apple logo appears and it restarts, ignoring the red slider if that appears.

If multiple users will be using the same iPad, how can I lock it so the settings cannot be changed, specifically the languages(students are changing the languages)?

If multiple users will be using the same iPad, how can I lock it so the settings cannot be changed, specifically the languages(students are changing the languages)?

Even with Apple Configurator most of the settings cannot be locked, and that includes the language settings. Most schools and organizations seem to just accept that they'll have to reconfigure the iPads on a regular basis.
Regards.

I'm having problems upgrading from 10.6.8 to Yosemite. My computer locks up after the download and installation process. Does anyone know how I can overcome this problem?

I'm having problems upgrading from 10.6.8 to Yosemite. My computer locks up after the download and installation process. Does anyone know how I can overcome this problem?

Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

I have change my phone language to english. but the phone shows chinese language in the internet pages and with call details. how to change it. why is this occuring?

i have change my phone language to english. but the phone shows chinese language in the internet pages and with call details. how to change it. why is this occuring?

If the phone is not unlocked, let's say for example it is locked to another carrier such as at&t, when you put in the Tmobile SIM in, the phone would complain about the SIM.
Does your phone do that? If yes, then the party that sold you the iPhone4S (if you purchased it from another person) may have not done the unlocking properly, and that may explain why Tmobile is insisting on the phone being locked.
If you purchased your iPhone4S new from Apple, did you pick Tmobile, or did you choose unlocked?
If you picked the Tmobile choice, then it should come up ready to use.
If you picked the unlocked choice, then you would need to visit Tmobile to purchase a nano-SIM and usually they should be more than willing to help you, since you're paying for their service.
But as you have indicated, this phone is under AppleCare, so if it doesn't work with a supposedly good Tmobile SIM, the quickest way to fix this is to get a replacement phone. When we troubleshoot we always try the least time consuming methods first.
You may have noticed it, that a good number of unfortunate uses of the iPhone4S have had their wifi become strangely disabled after upgrade to iOS7. Your situation is the reverse, your wifi is useable but not your cellular network.
In the mean time, you can apply for a Google Voice account (see http://www.google.com/voice), and obtain a free North American telephone number. You can then download one of many free Google Talk applications. Set it up, and you will be able to call and receive phone calls using your wifi. This would be just for the transition period before you get a useable phone.
Google voice provides average voice quality calls to and from US & Canada numbers for free for 1 hour per call. You can use this as a temporary work around while you are waiting for your replacement phone.
Cheers!

The language in the app store on my iPod touch is no longer English. How do I get English back?

The language in the app store on my iPod touch is no longer English. How do I get English back?

Do you have English selected in Settings>General>International>Language?
What country's App/iTunes store are you using? Di y change it to other than to an English speaking country?
To change
How to Change Your App Store Account Location | eHow.com

ColdFusion 11: cfclient in the context of the CFML language, not the tooling

G'day:
I am reposting this from my blog ("ColdFusion 11: <cfclient> in the context of the CFML language, not the tooling") at the suggestion of Adobe support:
@dacCfml @ColdFusion Can you post your queries at http://t.co/8UF4uCajTC for all cfclient and mobile queries.— Anit Kumar Panda (@anitkumar85) April 29, 2014
I have edited this in places to remove language that will be deemed inappropriate by the censors here. Changes I have made are in [square brackets]. The forums software here has broken some of the styling, but so be it. There is worthwhile discussion in the comments of the article on my blog: perhaps go have a read.
G'day:
This article could end up being a complete waste of space, as I am operating under more real-world re-interpretation of the raison d'être of <cfclient>, as described by Ram:
ColdFusion [11] has added support for client side CFML (<cfclient>) and this code is translated to JavaScript
Mike Henke has pointed out that the first part of this "CF11 has added support for client-side CFML" is actually ******** (my wording, not his):
"ColdFusion Splendor has added support for client side CFML" is probably phrased wrong and gave me flash backs to VBScript or CFML running in the client browser.
Maybe this is better verbiage. "ColdFusion Splendor has added support for CFML to generate JS".
Because... there's not such thing as "client-side CFML". That would imply CFML actually running on the client (ie: the browser, or the mobile device, as is the target of <cfclient> as a concept). This is absolutely not true. I know Ram went on to qualify what he meant there, but the messaging from Adobe on <cfclient> has been inaccurate. Possibly I think to the point of actual misrepresentation (in the legal sense, I mean).
What <cfclient> does is... convert CFML code to JavaScript. So let's look at that idea.
Why I say this article could be a complete waste of space is that I dunno if this is the intent of <cfclient>; because, really, the messaging from Adobe as to what <cfclient> is for is very muddied. In general the narrative about it is bundled-in with various features of ColdFusion Builder 3.0, in regards to mobile application creation and packaging (and debugging, and all sort of stuff that sounds quite nice but I don't care about as I don't use CFB).
However <cfclient> has to stand on its own merit in the CFML language, completely decoupled from CFB features. And as far as I can tell, Mike is right: as far as CFML goes, <cfclient> is a tag which tells ColdFusion to - instead of compiling to byte code - compiles the enclosed CFML code to JavaScript instead.
This of course just sets my alarm klaxons going. Because Adobe are (I choose my words carefully) [not very good] at converting CFML to client-side code. This has been borne out by <cfform>, <cflayout>, <cfpod> etc. Back in the days of CFMX7 the "CFML-to-client-side" wizards had some merit, because the client-side arena was still immature, and the team at Macromedia actually had some exposure to the idea of "website development", so they knew where the pain points were that they could possible ameliorate. Times have changed, and the client-side of things is probably now more mature an environment than CFML is - Javascript is probably are more coherent language than CFML is, now - and it is very very very clear that the current Adobe ColdFusion Team don't know the first thing about web development (they can't even write decent CFML for their own documentation, before we get onto how they'd be doing web work!), so they are completely out of their depth when it comes to addressing pain points that web devs might have these days. Not only have they not walked a mile in a web dev's shoes, they don't even - as far as I can tell - know what shoes are, or why someone would be wearing them.
And <cfclient> is a far more "meta" solution than <cfform> or <cfpod> were... at least the CFML-to-client-side solution there had a tangible target in mind. <cfclient> has removed the targets, and is just a tag designed for converting general CFML to general JS. Yikes.
600-odd words in, here's some code. This is the first-ever code I have written using <cfclient>:
<cfclient> <cfset msg = "G'day World"> <cfoutput>#message#</cfoutput> </cfclient>
So I'm off to a false start: I admit I'm sitting in the pub and I've had a few pints (probably four, I guess; this is "having some drinks before deciding to actually drink this evening" sort of level for me), and I inadvertently [messed-up] my variable names here. And this did not yield a compile error. The error just fell through to JS, where it did error
Uncaught ReferenceError: message is not defined gdayWorld.cfm:4
If, in contrast, I tried this in CoffeeScript, I'd get this:
coffee> msg = "G'day world"
'G\'day world'
coffee> alert msg
undefined
coffee>
alert message
ReferenceError: message is not defined
at eval (eval at (http://larryng.github.io/coffeescript-repl/js/main.js:96:26), :1:9)
Important note: I know nothing about CoffeeScript - it seems like a solution to a non-existent problem to me - so I just googled "hello world coffeescript" and REPLed the code on http://larryng.github.io/coffeescript-repl/.
The point is here is that ColdFusion, during the "compile" process should actually notice I am referencing a variable that doesn't exist. I'm OK with this being a runtime error in the normal CFML-compile process, because there could be many moving parts (and other files) involved in the runtime environment, but I don't think this is a valid notion with <cfclient>? Or maybe it is?
Update:As Ray points out and Aaron agrees with below: I was being unduly harsh here... it's entirely reasonable for variables to be declared in other JS code elsewhere in the response.
Anyway, once I actually write my code properly, I get this:
G'day World
On the screen. What CF actually sends back in the response is this:
<script type="text/javascript" src="/CFIDE/cfclient/cfclient_main.js"></script> <script type="text/javascript" src="/CFIDE/cfclient/cffunctions.js"></script> <meta name="viewport" content="width=device-width"> <script type='text/javascript'>globalDivStruct=null;var _$gdayWorld_func=function(){var self=this;var variables={};self.__init=function(){var localdivstruct=globalDivStruct;var __output_var="";var tmpVarArray={};message="G'day World";localdivstruct.outputvar+=message;return""}}; function __startPage__$gdayWorld(){document.write("\x3cdiv id\x3d'__cfclient_0'\x3e\x3c/div\x3e");window.ispgbuild=false;var clientDivStruct={divId:"__cfclient_0",outputvar:""};globalDivStruct=clientDivStruct;try{_$gdayWorld=new _$gdayWorld_func;_$gdayWorld.__init()}catch(__eArg){if(__eArg!=="$$$cfclient_abort$$$")throw __eArg;}__$cf.__flush(clientDivStruct)}__startPage__$gdayWorld(); </script>
[Blimey]. To output a string variable? Really? That's what you compile my CFML down to?
Gobsmacked.
And [forget] emotive things like "gobsmacked"... if one looks at the size of the response, it's 128kB to represent "G'day World" on the screen. 128kB might not be a great deal these days when it comes to a web page, but when it comes to rendering "G'day world", it's lunacy. And on a mobile phone - which intrinsically might be in an area in which one is paying a premium for data - it's just irresponsible. This is before we get to the point that it seriously should not take 128kB of data to render 11 bytes.
Blimey. To be honest I was gonna try some more tricky CFML and see how it compiled, but I've run out of will to live (and I have to concede the beer is getting the better of me, and my laptop battery is almost dead). I'll continue this, but I will let this article stand or fall on its own merit; something <cfclient> certainly seems to be unable to do, thusfar.
I'll be back on the case with this tomorrow.
Adam

The functions defined in the cffunctions.js are not namespaced. If it is namespaced, you would have to add the namespace while using a function inside cfclient.
These functions are not namespaced, so that you can use the same syntax for using a function inside and outside the cfclient block.
This is indicative of everyone's concern that you guys would just implement / encourage poor practice in your <cfclient> implementation.
How is it - given you're "compiling" the CFML anyway - you cannot translate source code that says "listlen()" into "compiled" JS that is CF.listLen() or something? Thus good CFML can be translated into good JS.
You seem to think that there's a one-to-one mapping between what the CFML says and what the resultant JS needs to be.
You've basically written a mechanism for a CFML developer to write bad JavaScript.
Well done.
Adam

I am trying to restore my iPhone 5 and my screen is no longer able to use and there is a lock code on the phone, how do i restore the phone without having to use the phonne?

how do i restore my iPhone with a lock code on the phone and the screen is completely unable to use?

Forgotten Passcode or device disabled after entering wrong passcode
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.

My ipad is locked up with the screen showing the usb port connecting to itunes. I had not synched by ipad to my computer in a long time so yesterday it was downloading software upgrades for 5 hours. then the screen was locked up.

My ipad is locked up with the screen showing a picture of the usb port with an arrow to itunes.

Then connect your iPad to your computer and use iTunes to restore.

HT4085 So does this mean that I cannot have rotation lock off and the mute function off at the same time? In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same

So does this mean that I cannot have rotation lock off and the mute function off at the same time? In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?

In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?
Yes, you can. You can configure the Side Switch (above the volume button) either as Mute switch or Rotation lock.
Settings > General > Use Side Switch to: choose what you like the Side Switch to function as.

Can I enable the root user account from the log in screen when I am locked out of the machine?

Hello everyone,
I am working on my friends mac to get it ready to sell. I went into the advanced options of the user and changed the name of the account. That's all I changed. I did read the warning that said if anything was changed it could cause damage, that's why I only changed the name of the user account. I didn't want to mess with anything else. Well, needless to say, I am locked out of the machine. Apparently the root user, system administrator, account was not enabled and I am stuck at the screen that I can get to with my installation disc. So how can I enable the root user account and get back onto the machine from the screen I am at? Can I enable the root user from terminal? I spent a good 8 hours yesterday researching this topic and have come up empty. Changing passwords from commands in terminal is not the problem. I am given just one account to choose from to log on and it's not accepting the password because of the changes I made in the advanced options menu.
Is there any hope of getting this thing going again? Or have I just screwed myself over?
Thanks for your help!
Leah

You can reset the password.
http://pondini.org/OSX/Password.html
Do you need to recover data from it before you sell it? If not you can just wipe the disk and prepare it for sale.
See > Apple What to do before selling or giving away your Mac
http://support.apple.com/kb/HT5189?viewlocale=en_US&locale=en_US
Also See Thomas Reed's How to Prepare your Mac for sale
http://www.thesafemac.com/how-to-prepare-your-mac-for-sale/
and this thread
https://discussions.apple.com/thread/5474062?tstart=0

How to use multiple languages at the same time for spell checking?

I use two different languages all the time and words are mostly so different (English and Finnish) that I could have spell checking on for both languages at the same time.
Now it seem to allow to select only one language at the time and I have to switch back and fort zillion of times per day.

Thanks for the quick answer.
The Dictionary Switcher doesn't seem to work with Finnish language, it doesn't detect it at all to be one of the choices although in the Firefox context menu Languages -> Finnish/Finland is shown.
Also, if it would work, I would need to get rid of multiple EN_* langauges. I just need EN_UK or EN_US, not all 22 different EN_*.
One option would be to create a custom dictionary, which would have words from both languages. The next task is then to find out how to make this kind of custom ENFI-dictionary, which would have words from both English and Finnish languages.
Finnish may be a some kind of special case for spell checking anyway, because the support is in its separate plugin:
http://voikko.sourceforge.net/

Why can't I use Korean language on the Muse?

How come you don't support Korean language on the Muse?
I need to build a new website in Korean, but found out there is no Korean font on the Muse...

Hi
Adobe Muse CC includes support for self-hosted web fonts. To use a specific font in your Muse site, you will need to install the system font (properly licensed for desktop use) and provide the corresponding web font files (properly licensed for use on a website).
For more details refer to : http://helpx.adobe.com/muse/using/typography.html#Working with Self-hosted web fonts
Give it a try and let us know if you need help or run into issues.

I'm visiting new York(USA) for work on Sunday, just wanted to know if i can buy an un locked iphone from the apple store or not, since i'm not a resident, to the record we don't have an apple store at my country

I'm visiting new York(USA) for work on Sunday, just wanted to know if i can buy an un locked iphone from the apple store or not, since i'm not a resident, to the record we don't have an apple store at my country.

You can buy an unlocked iPhone at any of the 5 Apple stores in NYC. All are open on Sunday. Note a couple of things, however:
US iPhone 5's will work on 3G in the rest of the world, but not on LTE because the US phones use different channels than other countries
Be sure you say "unlocked", not "no contract"
If it breaks it must be returned to a US store for repair, and if shipped to Apple it must be from and to a US address

How can I change the language of the time and date and numbers?

Hey
I bought the iPhone 5 and when I setted the settings I chose the country where I live now but the time and date and other numbers because in the language of the country and not in the language that I chose which Is english
so how can I change them?

Go to settings >> general and checkout keyboard, international and date & time.

Lock language in the tp/R3trans

Similar Messages

Maybe you are looking for