Lock mode while video playback.

Hi,
I have a C7 with Symbian Anna installed. I feel nokia should provide with lock mode in video player while playing a video. This will minimize the chances of exiting the video player or forwading by accidental touch.

In case anyone else reads this, I found the solution on my own.
Go into settings/general/passcode lock and make sure that Siri is allowed when locked.

Similar Messages

3110c keyboard light stays on while video playback

3110c keyboard light stays on while video playback. Also pause and back button are displayed always. Is there are way to turn off keyboard lights during video playback. This could also save some battery power.

Thanks for the reply.
- Is there any process to suggest improvements to the phone firmware , like the issue i mentioned.

How to Set Left/right audio channel while Video playback

how can I controlling the left / right audio channel while video playback, I can't find any method or class for this in JMF, anyone that can direct me how to do it?

The way I found to control two stereo channel is to implement a plug-in Effect that will control two volumes (left/right) indipandently.
You can start from the example GainEffect from sun, and implement your control.
For eample, if you want to mute the left channel, simply set to 0 all the odd samples (or even...I don't remember exactly, try it).
You have then to add you plug in to the processor chain... again see the examples.
More complex effects (panning etc) can be done in the same way, but it seems to me that it's quite CPU intensive.
Bye
Marco

IMac Enters Sleep mode during video playback

My imac started behaving badly a few weeks ago. It seems that at times of video play back, itunes, youtube, vlc, that my iMac just says nope and goes to sleep. I have tried resetting the ram during start up and it took care of the issue for all of an hour. I am at my wits end here please somebody give me a solution.

The times that your machine goes to sleep are times when you are maxing out the RAM. However, try looking in your Console>system log for any references to exceeding the maximum temperature for more than 30 seconds; that would indicate a thermal problem, probably the power supply unit failing.

Fullscreen video playback on external monitor (overlay problem?)

I want to watch videopodcasts via iTunes fullscreen on my external Monitor/TV. It works fine with Quicktime and WindowsMediaPlayer but iTunes doesn't play my Videos in Fullscreen on my external Monitor.
I had the idea it is because the overlay mode isn't siwtched on but I can't find where to setup the display mode of video playback in iTunes.
Can anybody help me?
Bernd.
PC Windows XP

oh, no...
i thouhght the iTunes Videoplayback would rely on Quicktime and thus it would be possible.
isn't there any other possibilty?
PC Windows XP

How can I stop my phone from going into the lock screen while talking on it? (New issue with ios 6)

Prior to ios 6, I could talk on my phone and have the mute button available. Now it goes into lock mode while speaking on the phone. This is terribly annoying when on conference calls and you want to mute/unmute, or just hang up a call. I now have to swipe to unlock, go to phone, and hang up or unmute. I've tried upping my timeout, but that just delays the inevitable.

Yep, it's a pain. What's even more concerning is that at the Genius Bar, he was trying to tell me that this is the was it was supposed to be, so they probably fixed it in OS 6. He said it is for people that are using "Bluetooth" and want to keep the phone in their pockets". Ridiculous! What compounds the issue is that the Apple Reps have no clue as to what's going on, and either do the senior tech's on the phone. As I said in my message, this has made it very cumbersome, and makes it very difficult for those who need to use wired headsets.

Issues with video playback, messed up shuffle mode with playlist sharing

I have a Mac (10.4.7) and a PC (XP SP2)... both are running iTunes 7 downloaded on September 12. All of my media is on my PC, and I do playlist sharing with my PowerBook across mu home network. A few issues with iTunes 7 that didn't exist for me in iTunes 6.0.5:
- Video playback is like multicolored TV snow. This happens on my PC as well as when the video is shared to my Mac.
- When sharing the music to my Mac, and I'm listening in shuffle mode, many times the same song will play twice in a row.
- I've only had this happen once so far (in the last 24 hours), but again I was listening to music shared to my Mac. One song played, then started to play again for the second time in a row. The song played for about 15 seconds, then jumped into another song. After that song was over, it jumped back and played the last 15 seconds of the previous song, all while having a completely different song highlighted in iTunes with the track position set to 0:00. It was very, very odd.
Frankenstien PC/PowerBook G4 Mac OS X (10.4.7) Windows XP Pro SP2

The first issue is resolved by http://discussions.apple.com/thread.jspa?threadID=639597&tstart=0
Any other ideas?

Is there a way to answer Voip calls such as Bria while the phone is in locked mode?

We are using Voip Apps such as Bria and Avaya OneX portal with Voip client enabled for SIP extensions back to Avaya IP Office, the issue is that Apple will not allow the answer splash screen to pop up while the phone is in locked mode..
On a smartphone you can lock the screen (for security reasons) and to unlock you need to enter a pin or password to get access to the phone. On a native cellular call the ability to answer the call is provided on the lock screen so that the user does NOT have to unlock the phone to answer the call. What this customer/partner is complaining about is with our VoIP portion of the application when an incoming call comes in and your phone is locked you cannot answer the call until you unlock the phone.    The issue is that Apple does NOT let application developers bypass the phones locked screen. Call it security or whatever you want this is something that don’t make available. Like I mentioned other VoIP applications like Counterpath suffer from the same Operating System limitation.
So a couple things:
1.       This is not a Bug it’s an operating system limitation.
2.       If this is that key for a user the only options are to turn off the lock screen or switch to Android (which does allow this).
Totally agree with the customers complaint there just isn’t much we can do. We can try to complain to Apple again however that is not going to yield anything.
Is there any way to get around this?
Thanks,
Kelvin

I'm going to give up on Apple if they don't change this soon. It worked before, answered like a regular phone call (slide to answer). But since IOS7 i really dont like my Iphone anymore. Looking around for alternatives.

Video playback lagging while buffering

Having a problem with video in my iPad app. The video is loaded from a server into an FLVPlayback component. While the video is buffering, the video playback is extremely choppy (like 1-2 FPS), but as soon as the buffering is complete, it plays smoothly. So obviously, the buffering itself uses too many resources (I've tested both on an iPad Mini and an ancient iPad 1).
Is there any way to reduce the resource usage of the buffering process so I can start playing before buffering is complete? YouTube is able to buffer while playing the same devices, so it should be possible. The videos are pretty low quality and around 70mb, and the bufferTime is default, not that that should make a difference.

But that's not the problem. The problem is that I cannot play the video smoothly while buffering is going on. It doesn't matter how much has actually buffered. It's as if the iPad's CPU is too bogged down by the buffering to play video at the same time, but I don't understand why, since YouTube and other apps (not made by me) are obviously able to do it on the same iPads.

Video playback in ALL applications stutters while using battery only.

Video playback in ALL applications stutters while using battery only. All OK when running from power adaptor. New battery did not fix. Recently updated iTunes to 11.0.5 and Flash player 11.8.800.94 .

Thank you again andyBall_uk.
I have successfully run Apple Hardware Test and it returned the error code...
4SNS/1/40000001:VPOR
A Google search reveals that this is a sensor error. The "V" of VPOR indicates a voltage sensor and the "P" indicates the sensor is on the Power bus. However don't yet know what the "OR" refers to.
I have had a non operative optical disk drive for a year or more but the fault with the video only developed in the last week or two. Could the "O" in VPOR refer to the Optical drive?
By the way, I got the impression from the instructions on running the Apple Hardware Test that I had to use the internal dvd drive to run the APT program from the install disk. But this turned out to be not the case. Just put install disk ito an external drive plugged into the usb ports and use system preferences to set this drive as the start up disk.

HT1212 Is my screen supposed to change from the screen with the charger and the iTunes circle to my lock screen while it's in recovery mode?

Is my screen supposed to change from the screen with the charger and the iTunes circle to my lock screen while it's in recovery mode?

Is Find My Phone turned on, on your phone? If so, eject from iTunes, login to iCloud.com, locate your phone, then erase it.
Does the same thing...removes the passcode. Then, either restore from backup, or setup as a new device.

Video playback and Album covers in Cover album flow mode are a mess

After installing iTunes 7.02 the cover albums come through on albums with song group list, but in the Cover Flow mode where you browse through the album covers, the covers are made up of verticle and horizontal lines and nothing can be made out. Even the bar at the bottom that allows you to drag and flip through the covers has a hashed line look.
The video playback images are also messed up. basically I can see that there is an image moving but it's not interpretable. The sound comes through fine. The image basically looks like a whole bunch of little squares that are not aligned right.
Any suggestions

with those symptoms, we'd better check through the suggestions from the following document:
Troubleshooting iTunes for Windows video playback perfomance issues

T3i Locking Exposure in video mode?

When some one moves an arm on camera I can see the exposure changing on the lcd monitor. Using older lenses I can see exposure changing/flickering as I zoom in or out.
How do you lock exposure in video mode? Even my several year old HV20 had a not-in-the-manual way of locking exposure.
Any video people here? I know how you lock exposure for still photography. I'd think the answer to this would be out there and not something that even stumped my local camera store.

http://www.dvinfo.net/forum/canon-eos-crop-sensor-hd/498717-manual-exposure-settings-video-mode.html
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

FCP Video Distorted While Importing & Playback Issues

While importing a Mini DV off of my Sony DVCAM deck there are some moments lately where the video playback and importing is distorted. There are four vertical lines that are pixelated with multi color over the video that is playing back. It happens on and off. This just happened and I play the video source from my camcorder everything looks fine. On top of that there are moments when I can control my deck through FCP but there is no video playing back in FCP. Am I missing something? This just popped up considering I have imported footage before with no problems. Anyone have a clue? Thankx
iMac G5 Mac OS X (10.4.2)

Try capturing a short segment using iMovie.
If it works, you most likely have a Quicktime issue.
Often in upgrading the OS, QT or FCP for some odd reason QT will get knocked slightly off kilter. The usual solution it to force a full reinstall of QT.
This is how:
Go to /library/receipts and delete any files that say Quicktime followed by a number e.g. Quicktime703.pkg
Go to the Apple quicktime site and download the appropriate version of Quicktime to your hard drive.
Run the Quicktime installer.
Reboot
Repair Disk Permissions for your System Disk (Disk Utility > Select the system disk > Repair Disk Permissions)
Good luck.
x

Is there an app that notify you on the iphone/ipad that someone is trying to log in into your computer(while is on lock mode)?

is there an app that notify you on the iphone/ipad that someone is trying to log in into your computer(while is on lock mode)?

Not to be rude, but you're just as capable of searching the app store as any of the other user's in this forum. Have you at least attempted that?

Lock mode while video playback.

Similar Messages

Maybe you are looking for