Lock NOT set for loading masterdata/attributes - already locked

Dear all,
I've searched this forum for similar topics bu couldn't find a solution yet
I'm loading masterdata for 0PERSON but an error appears stating' Master data table or text table already locked'.
I've checked if there is an attribute change run active but there isn't anything, I've executed all of them where necessary.
Transaction RSRV is not showing problems for the info object (No SIDS missing etc)
There are no locked records in SM12/SR12.
I've tried to reload the infopackage and run the DTP again but without success.
Please advice how to unlock the table.
Regards
Markus

Hi,
Just check following
1. Whether there is any active job in SM37 for loading this master data ,if anything triggered manually
2. Check whether any R/3 job is active for this master data
3. Check whether any attribute change run job is active
4. Check whether any roll up /BIA job is running
5. Check consistency of table in SE14 and RSRV for master data
6. Try to manually activate and see if same error is coming?
Also check following thread
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0869e29-1405-2e10-27be-db1dad7703c5?QuickLink=index&overridelayout=true
Thanks and regards

Similar Messages

DTP error: Lock NOT set for: Loading master data attributes

Hi,
I have a custom datasource from ECC which loads into 0CUST_SALES. I'm using DTP & transformation which has worked for loading data in the past for this infoobject. The infopackage loads with a green status but when i try to load data, the DTP fails with an error message at "Updating attributes for InfoObject 0CUST_SALES Processing Terminated" & the job log says: "Lock NOT set for: Loading master data attributes". I've tried reactivating everything but it didn't help. Does anyone know what this error means? We're on SP7. Thanks in advance!

Hello Catherine
I have had this problem in the past (3.0B) --> the reason is that our system was too slow and could not crunch the data fast enough, therefore packets where loacking each other.
The fix: load the data into the PSA only, and then send it in background from the PSA to the info object. By doing this, only a background process will run, therefore locks cannot happen.
Fix#2: by a faster server (by faster, I mean more CPU power)
Now, maybe you have another issue with NW2004s, this was only my 2 cents quick thought
Good luck!
Ioan

Lock NOT set for: Loading master data attributes error

Hi experts,
We were encountering this error before when trying to load master data. When we checked the system we could not find any locks at the time, and activation or kicking off the attribute change run failed again. We finally solved the problem running FM RSDDS_AGGR_MOD_CLOSE which sets the close flag to 'X' in table RSDDAGGRMODSTATE. I have read that it is possible this lock error happens when two change runs happen at the same time.
My question are:
1. is it possible to find out what process exactly "caused" the lock? the table RSDDAGGRMODSTATE does not have a reference to any object or job. I am curious as we are trying to find ways to avoid this in the future...
2. in our case, when we could not find any locks, is running this fm the only work around? is this a best practice?
mark
Message was edited by:
Mark Siongco
Message was edited by:
Mark Siongco

Hello Catherine
I have had this problem in the past (3.0B) --> the reason is that our system was too slow and could not crunch the data fast enough, therefore packets where loacking each other.
The fix: load the data into the PSA only, and then send it in background from the PSA to the info object. By doing this, only a background process will run, therefore locks cannot happen.
Fix#2: by a faster server (by faster, I mean more CPU power)
Now, maybe you have another issue with NW2004s, this was only my 2 cents quick thought
Good luck!
Ioan

Lock NOT set for: Loading master data attributes

Error when running Process chain on a load pls can you advise?
Thanks

Hi,
Probably some other job is running for the same tables,or activation change run is happening.
Check your monitor to see what other jobs are running or check in SM37. Wait till those jobs finish and then try again.
You can also use tcode SM12 to delete any lock entries as well.
Cheers,
Kedar

Lock NOT set for: Archiving the data from a data target

Dear Expert,
I try to archive one of my info cube, when i start to write the Archive file the Free Space in the Archive folder not enough and it make the process error.
Then i try to changes the Archive folder to another path with enough free space. But when i start to write the archive file with new variant this error message came up :
==============================================================
An archiving run locks InfoProvider ZICCPS810 (archivation object BWCZICCP~0)
Lock NOT set for: Archiving the data from a data target
InfoProvider ZICCPS810 could not be locked for an archiving session
Job cancelled after system exception ERROR_MESSAGE
==============================================================
Please Help Me.
Wawan S

Hi Wawan,
If the earlier archive session resulted in error, please try to invalidate the earlier session in archive management and try running archive job again.
Hope this helps,
Naveen

Error "Lock not set for: Generate index" while running process chain

SAP BI 7.0
SP 17
I am attempting to run a new process chain and the generate index steps are failing with the below errors:
"Lock NOT set forGenerate index"
"RSSM PROCESS INDEX terminated, because InfoCube/DSO object could not be locked."
The process chain just pauses. I let it finish once and it took 2 hours and then it gave the failure messages. I have looked in sm12 and can see the lock records when the process chain is running - unfortunately I can't make much of what's there - everything looks good to me. I also tried creating the indexes manually inside the cube and then re-ran, but still get the same error. Before running the process chain, I can get the indexes to check to green, but then after running the process chain they go back to red. I have attempted many things (including looking at other forum posts), but I still have the error. Please help. Thanks
Edited by: Brett Hutchinson on Feb 10, 2009 7:50 PM

Hello,
So Create index is getting failed in you PS right?
1)check if any other loads are running to the same CUBE(May be from other PC's also)
Goto Manage of the cube and check, some times it may happen if any Loads are running into cube I mean Load/DTP & roll up may be running.. if so wait till the others Loads(Jobs) get complete then Repeat the failed index
2) If the Create index is running for long time, then got RSDDV--> Select the CUBE then click on BIA index(Maintenance wizard), you can see a message if indexes are running , this will happen only when some one would have tried to generate the indexes manually and it may got failed due to some reason , since u are running it manually u couldn't identify whether it got failed or not unless you got to RSDDV and check. So delete the index here and then rebuild them through PC
Hope it helps!

"Java" is not a valid setting for the language attribute

Got an exception on Weblogic 10.3 after deployment in the JSP as ""Java" is not a valid setting for the language attribute"
I installed weblogic 10.3 and deployed one of the applications.
The JSP containing code like <%@ page language="Java" import=" is giving error.
The error message is like this
"Java" is not a valid setting for the language attribute"
Please let me know if i need to include some jars or change some setting.
Thanks and Regards
Manoj

Thanks a lot.
It is working now with small j of java. But i would still like to know why it was working in Oracle 10g app server and tomcat 5.0 server as well, but not in weblogic 10.3 server. If possible please tell me.
Thanks and Regards
manoj

SVM state database replica Master flag not set for any replica

Hi guys,
Recently i have done root mirroring. After creating svm volumes, i ran the metadb command to create state database replicas on the replaced disk. I created only one replica that time. I tried creating additional replicas but it said like replica already exist on the slice. So i deleted the replica on the slice. Thn i created 3 replicas again & ran metadb. Output of metadb command is below. I found there is not master flag not set for any replica. I like to know whether it would create any issue or it is fine.
flags first blk block count
a u 16 8192 /dev/dsk/c1t0d0s7
a u 8208 8192 /dev/dsk/c1t0d0s7
a u 16400 8192 /dev/dsk/c1t0d0s7
a p luo 16 8192 /dev/dsk/c1t1d0s7
a p luo 8208 8192 /dev/dsk/c1t1d0s7
a p luo 16400 8192 /dev/dsk/c1t1d0s7

That shouldn't be any problem, i think the metadb's are just read at boot, and at boot one of the replicas will be choosen as the master, and will then get the m-flag.
I suspect that you deleted the replica which was used as the master during the last boot, which is why none of your replicas have the m-flag at the moment, which is not a problem as it will be choosing a new replica during the next boot.
.7/M.

Using a Variable in SSIS - Error - "Command text was not set for the command object.".

Hi All,
I am using a OLE DB Source in my dataflow component and want to select SQL Query from the master table I have created variables v_Archivequery
String packageLevel (to store the query).
<Variable Name="V_Archivequery" DataType="String">
     SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
     FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
     ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
     Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)
    </Variable>
I am assigning this query to the v_Archivequery variable, "SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)"
Now in the OLE Db source, I have selected as Sql Command from Variable, and I am getting the variable, v_Archivequery .
But when I am generating the package and when running I am getting bewlo errror
Error at Data Flow Task [OLE DB Source [1]]: An OLE DB error has occurred. Error code: 0x80040E0C.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E0C Description: "Command text was not set for the command object.".
Can Someone guide me whr am going wrong?
Please let me know where am going wrong?
Thanks in advance.
Thankx & regards, Vipin jha MCP

What happens if you hit Preview button in OLE DB Source Editor? Also you can use the same query by selecting SQL Command option and test.
Could you try set the Delay Validation = True at Package and re-run ?
If set the query in variable expression (not in value), then Set Evaluate As Expression = True.
-Vaibhav Chaudhari

Temp folder was not set for RTFStringbuffer Error

Hi,
We are using CR XI 11.0.0.895 and CR XI JRC is been used to generate the reports in PDF and RTF format.
While generating report of more than 1000 pages in RTF format throws the below mentioned exception
temp folder was not set for RTFStringbuffer
However, Generating reports in PDF format generates the report.
Find below the environment details which would helpful for the analysis.
CR XI 11.0.0.895
IE 6.0
MS-office 2003
Windows XP SP2
Reports JRC application deployed on Weblogic 8.1.4
Please suggest us a solution for this problem.
Thanks in advance.

If you run [Process Monitor|http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx], do you see any file access errors when the JRC tries creating a temp RTF file?
I think I've recommended this before, but have you tried the newest version of the JRC?
[https://boc.sdn.sap.com/node/19020]
The XI Release 1 keycode will work with it.
Sincerely,
Ted Ueda

Error "Lead selection not set for context node"

Hi everyone,
I've got a Tree control in WebDynpro ABAP and I've implemented an "expand all" button.
Here's the coding:
METHOD expand_node_rec.
DATA lo_el_child TYPE REF TO if_wd_context_element.
DATA lo_node_children TYPE wdr_context_child_map.
DATA wa_lo_node_children LIKE LINE OF lo_node_children.
DATA lo_nd_child TYPE REF TO if_wd_context_node.
DATA lo_kschl TYPE klschl.
DATA lv_has_children TYPE boolean.
lo_el_child = node->get_element( ).
lo_node_children = node->get_child_nodes( ).
node->get_attribute( EXPORTING name = 'KSCHL' IMPORTING value = lo_kschl ).
node->get_attribute( EXPORTING name = 'HAS_CHILDREN' IMPORTING value = lv_has_children ).
IF lv_has_children = abap_true.
    node->set_attribute( name = 'IS_EXPANDED' value = abap_true ).
ENDIF.
LOOP AT lo_node_children INTO wa_lo_node_children.
    lo_nd_child = wa_lo_node_children-node.
    me->expand_node_rec( node = lo_nd_child ).
ENDLOOP.
ENDMETHOD.
However I'm getting the error above: "Lead selection not set for context node".
Any suggestions?
Edited by: DEVELOPMENT THEMIS on Jul 7, 2011 6:34 PM

hi developement Themis,
I think u didn't diclare "node" as context node. So declare it as a context node before using as a context node..as below
DATA node TYPE REF TO if_wd_context_node.
or u can use "lo_nd_child " as ur context node in ur program in place of "node"
then I think this error will be removed.
thanks,
simadri

HT5312 after I entered the password of my iCloud ID, it prompted out asking me to check email from an emai address that I did not set for rescure and then I cannot login? now my iPhone has got all the cotacts lost.

after I entered the password of my iCloud ID, it prompted out asking me to check email from an emai address that I did not set for rescure? and then I cannot login.

Try going to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Checking from app whether a passcode lock is set for Ipad

Hi,
Since my app would be dealing with sensitive data of the user, I would like to know if there is a way I can check from my app whether there is a Passcode Lock set for the Ipad.
The reason I need to check this is because say if the user has in the app some information and then keeps it on the table and goes out for a couple of minutes. The ipad/iphone by default, goes to standby mode. If a passcode lock had been set, only when the correct passcode is entered, would anyone be able to use the ipad. This would provide an additional security measure to prevent any passerby to view the sensitive data from the app.
So basically, I would like my app to check whether the passcode lock is set and if not prompt the user to do it.
Is this possible and if so, would any one be able to point me in the right direction?

thanks for the link..
well, that still does not give me what I need.. I have implemented that functionality already in my app..
Since this is a client requirement, I need to make sure whether it is possible or not.. so again, I need to check from my app, whether there is a passcode set in the ipad ( so that only when the passcode is typed, will the ipad be unlocked) . if a passcode lock is not set in the ipad, then I should be able to tell the user to do it...

My iPod touch screen doesn't shut off. The auto lock is set for two mintues, and everything else is working fine. I've noticed it only fails to shut off when in the music screen. How do I get the screen to shut off without using the lock button?

Please help. This is really annoying and it runs my battery down. My auto lock is set to two minutes. I've checked several times. Thanks.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Customizing setting for parked documents of edit lock which are in workflow

Hi all,
I want to lock a parked document from edit while in workflow, I have seen in my previous project that if any document in workflow if try to change it used to give a message that 'document in wirkflow'. how to set this setting for parked documents using FIPP.
Thanks

Hi,
Please read note 169732.
It is normal that you get this errror message "Park document blocked xxxxxx" if you try to park a document for which "Release necessary" is set but "Released" flag is not set.
Normally in workflow the "Released" flag is set in a background step right before the workflow posts the documents.
regards
Waman

Lock NOT set for loading masterdata/attributes - already locked

Similar Messages

Maybe you are looking for