Lock records command

Hi all,
I have a scenario where i have to lock the lookup table records for editing. So that other users cannot edit the record.
I am processing the lock record command for records which are not locked by other session (LOCK_BY_OTHER_SESSION).
Lets say User A lock the records.
I am loging in to the data manager using User B. When i try to edit and save the locked records data manager should warn me with a message like "Record has been locked by other user. would you like to edit anyway?". But i am not getting any warning message.
I doubt the records were not locked by user A.
Is my understanding correct? Am i missing any step here? Please help!
Best regards,
Arun prabhu S

Found the answer!
Lock will be lost once the user session destroyed.

Similar Messages

Lock records when in Update Mode / problem with 2 users on 1 document

Hi,
when user A updates e.g. a purchase order and user B goes into this purchase order and updates e.g. the remark before user A, then user A cannot save his changes. Imagine user A has put in several new lines and has made several price adjustments, his work will be gone.
In most cases this should not happen very often, but it could. Since B1 recognizes when another user has updated the document before, it should be possible to solve this situation more convenient (either by lock, saving to a new document, comparing to the old version, etc).
Thank you
Sebastian

Hi Sebastian,
Your request is understandable. It may not have big problem to change current process by coding. However to lock records whenever in update mode, that could create too many locks. It is basically not good for performance. The trade off may be allowing save as function. However, this may not be a desirable solution for most end users.
Thanks,
Gordon

How to lock record in a remote database ???

Hi All!
How to lock record in a remote table ??? Is it possible to lock by using the RPC ??? What are the options available ??
thanks
Sanjeeb Bose
HCL Infosystems Ltd
Kolkata India

DBLinks may be one option...
--Shirish

Reading Locked records from HR table using LDB PNP

Hi,
I am trying to read the table pa0168 using LDB PNP.
But the problem is that get pernr staement does not retrieve locked records i.e where PA0168-sprps eq "X'.
Can anybody help me with this.
I have to use LDB so i don't want a solution of writing a select * for the pa0168 table.
hence i have to use get pernr statement but it should also retrieve locked records.
how can i achieve that.? please help
Thanks
GT
Message was edited by: GT

Hi GT,
In the START-OF-SELECTION event, set the parameter value
pnp-sw-ignorelockedrecords = 'N'.
Good Luck,
Suresh Datti
( Pl award points if the answer helps you )

Is there a lock screen command in OS X similar to Screen Lock in Windows?

I want to lock screen for a brief period of time, and didnt want to log out or shut down the system.
Is there a lock screen command for this, so that I can lock it and unlock whenever I need?
Or I am wondering if I can log out without closing the application so that when I log in back, I get to the application and continue working from whereever I left.
I dont want to close the application and be able to lock or logout the user. Please suggest me some ideas.
Thanks,
Gopinath

Open the Security pane of System Preferences and check the box to require the password to wake from sleep or screen saver. In the Desktop & Screen Saver pane, set up the screen saver to activate when the mouse is at a specific corner. The screen saver can be unlocked with the password of the person who is logged in to the machine or with any administrator password.
(15568)

Standard Report to display locked records of an infotype

Hi All,
Is there any SAP standard report to display the locked records of an employee.
Suppose for an employee his two absence record has been locked and one additional payment has been locked. Is there any SAP standard report to display his locked records.
Thanks and Regards,
Visali. Malepati

Hi,
Hi there is no standard report to get the locked records.
You create a query thru quick viewer.
where you can heve selection field as lock indicator and Personnel number.
Steps:
1. Goto SQ01
click Qucikviewer
or
SQVI
2.Create a new query
Datasouce:Table
Table:PA0006
3.Lst field Selection tab:
Add the fields pernr,lock indicator,enddat,begdate.
4.Selection fields Tab:
Add the fields pernr,lock indicator
5.Execute:
Your Query is ready now:

Indesign CS3 Data Merge "Merge Records" Command. Help?

I'm looking to automate the merging of a mountain of records. I have 587 tab-delimited text files with 40 records each. I want to process these via Data Merge using a single pre-designed template with built-in placeholders and variable data fields, including a variable barcode graphic. In the end, I want to create 704 multi-page, 6-up per page, indesign files with merged data, and 704 multi-page PDFs.
Here's where I am at. Using a combination of AppleScript, TextWrangler and InDesign CS3, I am able to set up a loop where I can open the single template, save it to a new file with a new name, change its data source to the appropriate text file, and as a test, make a PDF of the template using the correct export preset. What I cannot seem to do is get the template to perform a "Create Merged Document...".
In InDesign CS3's AppleScript dictionary there is a command called "Merge Records" under the Data Merge section. It appears to do exactly what I am after. But when I try to use it (and the good Lord knows I have tried numerous permutations), it only returns errors like "Adobe InDesign CS3 got an error: active document doesn't understand the merge records message."
Anyone know what I am doing wrong? I have set up a separate AppleScript for testing purposes that opens up the template, saves it under a new name, and attempts a "merge records" command. Here it is. Maybe someone smart out there can tell me what I am doing wrong.
set templatePath to "Welch_Jobs:0_JOBS:280019_Churchill:WPC FILES:Workup:280019_6up_master template.indt" as text -- the main template file that will be modified, saved with a new name, then merged with its data to create a new merge file
set newTemppath to "Welch_Jobs:0_JOBS:280019_Churchill:WPC FILES:Workup:goody.indd" as text
tell application "Adobe InDesign CS3"
open file templatePath
tell active document
save to newTemppath
merge records
end tell
end tell
I have this feeling that this is a command that is actually unsupported. Google searches have been fruitless except for one poor soul who can't get it to work either. I have, however, seen that a similar JavaScript command exists called "DataMerge.mergeRecords". If it is impossible to do this via AppleScript, is it possible to make a JavaScript that will do it, and access the JavaScript with a "do script" command in the main AppleScript? If so, how would I accomplish this? What whould the JavaScript look like, and where do i need to put it?
I would greatly appreciate any help you, dear reader, can give me on this.

Well, did you look at the dictionary?:
merge recordsv : Merges records and produces an optional overset report.
merge records
data merge
output overset report file alias or
text] : The path to the file in which to store the overset report.
Note also that it's part of the Preferences Suite, not the Datamerge suite. Do you see differently?
Anyhow, you're clearly not calling it with a data merge parameter.
I also have a suspicion that it needs to not be inside a "tell active document" but it probably doesn't matter.
But my AppleScript is rusty.

How to lock records in 8.1.7?

Hi,
How can I lock records in 8.1.7 so that only one user can select/update these records at one time? If possible, can it return an error mesg if one user try to select/update records locked by others?
Thanks a lot.
David

Oracle automatically locks a row just before updating or deleting.
You can lock rows explicitly before doing an update etc by selecting it for update:
select * from emp where empno=21 for update;
update emp
set sal=sal*1.1
where empno=21;
commit;
The lock will be released on the commit (or rollback).
Please note that in Oracle, writers never block readers and readers never block writers. Which means, that although you have locked a row (or group of rows) for update, other users will still be able to select against those rows (in the pre-changed or consistant state).

How to get locked records of a pernr while using PNP LDB

is there any way to retrieve locked records of a pernr
while using PNP LDB??currently the get pernr event is unable to load locked records of a pernr.

Hi,
PL use this piece of code in your Program..
INITIALIZATION.
PNP-SW-IGNORELOCKEDRECORDS = 'N'.
Regards,
Suresh Datti

Custom Infotype not displaying locked records in the list screen (3000)

I have a custom infotype (9xxx) that will not display the locked records (locked indicator (sprps) is set to X) in the list screen (3000) in PA20 and PA30.
Any ideas on what may be causing the records to not display in the list screen?
Thanks,
Ted

Hi,
for creating both employee and appliciant infotype you must check 'Both' in PM01 IT tab.
Regards.

Locked Records Indicator

Hi,
Here is the scenario:
We have several users (in AutoCAD) that retrieve, delete, modify, and post data back to Oracle Spatial DB (10g).
During data retrieval, we use the SDO_WITHIN_DISTANCE operator based from either a Road Name or Building Name with a flexible buffer distance. Now, the chances of the users having retrieved the same records are very high.
My query is, is there an indicator in the row level that will show that the particular record has already been locked/retrieved by another user? I have read about the "SELECT .... FOR UPDATE" system of locking records, but the problem would be the possibilities of having a "Lockout" or a "Deadlock". That is why, we would like to handle the records firsthand before displaying it into AutoCAD.
Knowing this, we can provide some mechanism in AutoCAD to avoid the record to be modified or deleted by another user (i.e. giving a read-only attribute, changing layer or color, etc. etc.).
Thank you very much for your ideas.
Regards,
Arnold Higuit

Depending on your requirements, you may want to do the initial query without trying to lock the records (if you do the select ... for update nowait on the initial query and there are records locked, it will fail).
After you do your initial query, then you can try to select individual records by a unique key for update (using nowait), and any record that is already locked can be styled in an appropriate way.
Note this will be significantly slower (selecting each individual record).

Lock record problem.

Hi All. I use Firebird DB with WLS. In Firebird when no DataBase transaction parameters specified the default parameters is set. By default transaction isolation levels is "concurency, wait". It means that when 2 concurrent transations try to lock record (select ... from table for update), second transactoin waits while the first will be complete. I need exception in this case (nowait in transactoin parameters).
In Firebird JDBC driver there is a file with mapping to standart jdbc transaction isolation levels:
TRANSACTION_SERIALIZABLE=isc_tpb_consistency,isc_tpb_write,isc_tpb_wait
TRANSACTION_REPEATABLE_READ=isc_tpb_concurrency,isc_tpb_write,isc_tpb_wait
TRANSACTION_READ_COMMITTED=isc_tpb_read_committed,isc_tpb_rec_version,isc_tpb_write,isc_tpb_wait
I change wait to nowait in this file, bat i dont no where i can set transaction isolation level on weblogic server. How I can do this?

In the on-lock trigger, instead of Lock_record; you should write your own sql "select for update no wait".
Then I am not sure... either write your own exception clause to trap the ORA-00054, or trap the exception in the on-error trigger.

Lock records (urgent)

Dear members,
I hava a problem with lock record. Would you please help me to solve my problem. I had read on OTN messages about locking records that others members have used the following:
On_lock trigger(Block level)
Lock_record;
On_Error trigger(Form level)
DECLARE
errnum NUMBER := ERROR_CODE;
errtxt VARCHAR2(80) := ERROR_TEXT;
errtyp VARCHAR2(3) := ERROR_TYPE;
BEGIN
IF errnum = 40501 THEN
     message('This record has been locked by another user');
ELSE
     Message(errtyp||'-'||TO_CHAR(errnum)||': '||errtxt);
END IF;
RAISE Form_Trigger_Failure;
END;
I still received the ORACLE message "COULD NOT RESERVE RECORD(2 TRIES). KEEP TRYING? YES OR NO".
If I select "NO" my message will come up, but I want the ORACLE message suppressed. How do I do that!
THANKS

In the on-lock trigger, instead of Lock_record; you should write your own sql "select for update no wait".
Then I am not sure... either write your own exception clause to trap the ORA-00054, or trap the exception in the on-error trigger.

How to get the time length from send record command to record video really?

I have two buttons. Record/Stop
I press Record button to record the video and press Stop
button to stop recording.Now,I spend 1986 ms from press Record
button to press Stop button.
But the flv file's length is 1920 or 1910 or 1915 ms.
So I want to get the time length from send record command to
record video really.
Can you give me some suggests.
Thanks!

maybe you have lag in publishing.... are you try watch de
NetStream.liveDelay() method?
or start counting when NetStream.onStatus has
"NetStream.Record.Start" and "NetStream.Record.Stop" in information
objects....

Locked record in infotype 0167

Hi,
I would be thankful if some one can explain me the concept of lock record of an employee in infotype 0167.
As in one of my requirement i have to fetch both the records ie active and locked (having same begda and endda).
Is there any specific thing i need to do apart from
INITIALIZATION.
pnp-sw-ignorelockedrecords = 'N'.
Regards
Manu

Hi Manu,
Locked record means taht record id not yet ready to process / use in reporting, becuase that data is insuffient. You can lock/unlock a infotype record using pA30-0167-edit-Lock/Unlock option.
For example infotype 2001 or 2002.
Regards,
Ranjith

Lock records command

Similar Messages

Maybe you are looking for