Lock screen during use since 10.2 installed on z10

Since upgrading to 10.2 on my z10, my device keeps going to the locked screen while using it. This only happens when the device is connected to a bluetooth device. Need help to fix this. Any suggestions?

Hi, Did you Install Flash Player into Firefox? If so, look in plugins for Shockwave Flash and make sure it is Enabled.
Let me know,
Thanks,
eidnolb

Similar Messages

  • Older Version MacBook White Screen During Use

    My MacBook (early 2009) keeps getting a white screen during use for anywhere from 15-90 seconds. Is this normal? What can I do to fix it? Or is the computer just too old and I should get a new one?

    I have 24 inch iMac and I get either an almost black screen/white screen or sometimes a green and white vertical pinstriped screen. This happens suddenly with no warning & I have to hold the start button in to shut down. It then starts up fine with apparently no harm done. It is very annoying but I need to know why my Apple is doing this. Computer is around 2-3 years old and now running 10.6.8. I had to buy this as when I inherited the machine know one knew where the OS software was.
    Does anyone rate Genius bar - can they determine what the prob is? I took a G5 tower in as it wouldn't start but they were unable to help - local PC shop sorted it charging me £100 - realised later it needed a new battery (£7) so you can't rely on anyone out there I'm afraid!
    I will need a new iMac 27 inch anytime soon but am loath to give anyone currently selling machines the money!

  • How can i reject incoming calls in lock screen , without using ON/OFF key ??? (in iOS 7.0.2)

    how can i reject incoming calls in lock screen , without using ON/OFF key ??? (in iOS 7.0.2)

    You can't. Either tap the Sleep/Wake button or just let the call to continue to ring.

  • Delete Lock Screen Wallpaper/ Using Customize To Change Slider Icons

    So, though it may sound a bit silly, i've had different wallpapers display on my lock screen for some time now, but i've found that i have absolutley no idea how to take it off. i'd simply like to revert back the the battery image on the lock screen, no wallpaper at all. i've gone through settings, and looked for a "No Wallpaper" option, but there is none to be found.
    Also, I've been trying to figure out how to add new images for the slider buttons, as well as the other options that are allowed with customize, can these be found in the Installer.app? i havent seen such things, unless there are sources that i havent found yet.
    help would be much appriciated, thanks!

    Hey Alan,
    To change the Wallpaper goto Settings>Wallpaper. The earth is the default image.
    There is no option to change the slider icons.
    You can request that feature online here:
    http://www.apple.com/feedback/iphone.html
    Jason

  • Lock Screen not working since upgrade to 4.2

    Hi People.
    My lock screen switch doesn't lock the screen anymore. Instead it mutes the audio.
    Any ideas?

    There are many many posts on this, and many many references on others sites: Googling 'iPad lock switch", the entire first page of results referred to this issue-which-is-not-an-issue and whose 'resolution' I've described below
    I'm not intending to be snarky, merely to point out that the answer is easily found. Also to point out that, when upgrading an operating system, it behoves us to +read the release notes+ because they contain important information. Finally, if you ant to add your voice to those who aren't happy about it, there are many threads here already open or you can go to
    http://www.apple.com/feedback/ipad.html
    and tell Apple themselves
    As of iOS 4.2, the lock switch now operates as a mute switch, as on the iPhone. To lock orientation:
    1. Double-tap the Home button to bring up the multi-tasking pane.
    2. Swipe to the far left to reveal the orientation lock icon
    3. Tap the icon to lock. Tap again to unlock
    4. Tap the Home button to return to the main screen

  • No lock screen during call using headphones ios 7.04

    anyone having issues with ear or head phones. If i ask siri to call someone the screen activates in my pocket.
    Think its an issue with ios 7.04

    I also have this problem especially when I try to hold the phone between my shoulder and ear without using a hand....prior to iOS 4, the on/off button on the top would lock your screen while on a call. I had an original and 3G and never had this problem...once I upgraded to iOS 4, I began having the problem and because of the sensitivity improvements (overdone in the case of phone to ear), the iPhone 4 has made it even worse.
    My nephew called yesterday and just received an iPhone 4 without ever having had a previous and he hung up on me 3 times and has been hanging up on clients...he hates the phone now...I explained to him the proximity, accelerometer, and gyro-meter features and walked him through so he could see how the screen went from lit to unlit as he positioned it on his face....he just naturally holds the phone such that it is tilted to far and thus the screen becomes lit and touches his cheek.
    I just want my old way of locking it (without having to have headphones) by using my on/off button. I can use the "end call" button to end my calls.
    iPhone user since 2007 and this is the first thing I can say is truly annoying...even more annoying than the 3G phone being so slow in iOS 4.0 (now fixed in iOS 4.1).

  • Blue Screen error using Boot Camp when installing XP on the MacBook Pro

    I have been trying to install Windows XP Professional (with SP2) on my MacBook and I keep encountering blue screen errors during the install. I successfully create the Windows partition with Boot Camp (v2.0) and then Windows install begins. However, during the setup process it hangs and then eventually throws an error showing a blue screen. There has been a different error each time I've tried to install. I've booted in OSX and then deleted the Windows partition through Boot Camp and then attempted the process from the beginning five separate times and each time I get an error during the initial install phase.
    Its not a matter of the installation CD because i borrowed 3 differnt copies from some friends and i still have the same issues.
    Once, I managed to actually start windows XP however it was full of errors probably as parts of it weren't properly installed due to the the blue screens that made me reboot several times.
    Am I the only one having this problem??
    Is this a matter of the hardware? Can you think of any possible solution?
    (I used NTFS did everything propperly I'm 100% sure)(I tried FAT as well)(still nothing)
    PLEASE HELP

    Can you read and write from your optical drive? I would have it checked by burning something to it and seeing if it can be read.
    I have noted a link, with some information that may be helpful, for you to check out.
    http://discussions.apple.com/message.jspa?messageID=7872477#7872477
    I would repair permissions before your next attempt too.
    If this fails, I would contact Apple.

  • I can't access/find the "lock" screen orientation funtion since downloading iOS 7

    Since I downloaded iOS 7, I can't access the "lock" orientation key that used to be on the control centre. I've flagged on "use side switch to: Lock Rotation", but to be honest I have no idea what this means. How do I "lock" orientation of my screen with this new operating system?

    Hi Anna,
    With iOS7 on an iPhone, you lock the rotation by bringing up the control center and selecting the "Lock Rotation" icon. To bring up the control center, swipe up from the bottom of your screen. You should see a translucent display with the control center options:
    http://www.apple.com/ios/design/
    See the "You know a good design" part in the article above.
    Cheers,
    GB

  • Sudden white screen during use...

    I've only had my new iMac for a few days and although it was bought used, it's been extremely well looked after, and things were great until just now when the screen went completely white rendering the mouse useless and forcing me to disconnect the power lead and start up again. Should I be alarmed or is there a simple explanation and a reliable cure to hand?

    I have 24 inch iMac and I get either an almost black screen/white screen or sometimes a green and white vertical pinstriped screen. This happens suddenly with no warning & I have to hold the start button in to shut down. It then starts up fine with apparently no harm done. It is very annoying but I need to know why my Apple is doing this. Computer is around 2-3 years old and now running 10.6.8. I had to buy this as when I inherited the machine know one knew where the OS software was.
    Does anyone rate Genius bar - can they determine what the prob is? I took a G5 tower in as it wouldn't start but they were unable to help - local PC shop sorted it charging me £100 - realised later it needed a new battery (£7) so you can't rely on anyone out there I'm afraid!
    I will need a new iMac 27 inch anytime soon but am loath to give anyone currently selling machines the money!

  • White screen during use

    While using my MacBook Air, the screen suddenly goes white.  I am unable to force quit, the only thing I can do is hold down the power key to power it down. When starting back up, it runs fine, for a while. This has happened twice - yesterday and today (using standard programs and internet).  Any ideas about what I should do?  (purchased new, 1.6 GHz Intel Core 2 Duo, 4GB).  Thanks!

    I have 24 inch iMac and I get either an almost black screen/white screen or sometimes a green and white vertical pinstriped screen. This happens suddenly with no warning & I have to hold the start button in to shut down. It then starts up fine with apparently no harm done. It is very annoying but I need to know why my Apple is doing this. Computer is around 2-3 years old and now running 10.6.8. I had to buy this as when I inherited the machine know one knew where the OS software was.
    Does anyone rate Genius bar - can they determine what the prob is? I took a G5 tower in as it wouldn't start but they were unable to help - local PC shop sorted it charging me £100 - realised later it needed a new battery (£7) so you can't rely on anyone out there I'm afraid!
    I will need a new iMac 27 inch anytime soon but am loath to give anyone currently selling machines the money!

  • My iPad 2 went to the lock screen while using Chrome?

    I was using the Chrome browser on iPad 2 when it suddenly turned to the lockscreen. It kept doing that for about... Four times. It stopped for a bit now, but I'm not sure if I just accidentally pressed the power button or it's a real problem. I don't know if it's just the Chrome browser or all the apps in general. Help?

    Hi Roo Hai-On-Sky,
    If you haven't already done so, does restarting or resetting the iPad help the issue?
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If not, we may want to restore your iPad using a computer with iTunes.
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    Thanks,
    Matt M.

  • Sudden white screen during use, which requires reboot.

    This has just started happening while I'm browsing the internet (with Firefox), and I'm forced to restart before I can continue. It's happened roughly 3 times in the last week and naturally I'm concerned as to the cause. Any help is greatly appreciated in advance...

    I have 24 inch iMac and I get either an almost black screen/white screen or sometimes a green and white vertical pinstriped screen. This happens suddenly with no warning & I have to hold the start button in to shut down. It then starts up fine with apparently no harm done. It is very annoying but I need to know why my Apple is doing this. Computer is around 2-3 years old and now running 10.6.8. I had to buy this as when I inherited the machine know one knew where the OS software was.
    Does anyone rate Genius bar - can they determine what the prob is? I took a G5 tower in as it wouldn't start but they were unable to help - local PC shop sorted it charging me £100 - realised later it needed a new battery (£7) so you can't rely on anyone out there I'm afraid!
    I will need a new iMac 27 inch anytime soon but am loath to give anyone currently selling machines the money!

  • Black screen during windows 7 install on 27inch iMac

    My iMac turns to a black screen during windows 7 boot camp install. I can use the install disk on my wifes Macbook Pro so I know that the media is good.

    Please re-post in the Boot Camp forum.

  • I5 17''MBP  gets blue screen during install windows 7 32 bit

    Hello all:
    I heard that quite many people get classic windows' "blue screen" during using windows , whatever Windows XP, Vista or 7. But now i face the "blue screen" during install Windows 7, which means I even can not complete installation.
    I bought my Macbook Pro i5 17'' one month ago, and I'm trying to install Windows 7 but I face the problem during the installation. After finishing first 4 steps the computer would restart and start to "finish installation", but at this time it gets "blue screen" and shows "error: 0x0000009c" and stuck there. I have to shut down the turn off button and interrupt the installation.
    I don't know if there's any one else face this unlucky situation. I searched on the net and it says the problem could be from memory, graphic card (too new), or even overlocking the cpu,whatever it must be the problem of hardware. I thought it might be the problem of compatible.
    If anyone knows how to deal with this problem??!! I do need to use some software under Windows system!

    It is good to see that it is indeed a USB2.
    The support software on the USB is used in the Pre-boot environment setup and provides drivers for Apple specific hardware, GPU, BT, Mouse, etc. You can verify that by looking at the USB contents. The DVD contains generic drivers when hardware is not recognized as defaults to use. Apple does enough 'secret sauce' to make them different. The following does not explicitly state the USB2 need when using the DVD Installer and mentions W8 (not W7).
    From Boot Camp: Creating an ISO image from a Windows installation DVD - Apple Support
    Insert a blank USB 2 flash drive that is a least 16GB in size into a USB port on the computer. Boot Camp Assistant uses this drive to store the Windows 8 install media and support drivers during installation of Windows.
    Note: This flash drive needs to be formatted for the FAT32 file system and must use the Master Boot Record partitioning scheme. Use Disk Utility to check the format of the flash drive before proceeding, and partition or erase the flash drive if necessary.
    I suspect the GPU is not getting the correct driver and the Installer fails. The Generic VGA should work. From the OS X side, can you see files in your BC volume? If yes, can you look for logs in the BC volume at the following locations.
    ./Windows/Inf/setupapi.dev.log
    ./Windows/Inf/setupapi.offline.log
    ./Windows/Inf/setupapi.setup.log
    ./Windows/Logs/SetupCleanupTask/setupact.log
    ./Windows/Logs/SetupCleanupTask/setuperr.log
    ./Windows/Panther/FastCleanup/setupact.log
    ./Windows/Panther/FastCleanup/setuperr.log
    ./Windows/Panther/setupact.log
    ./Windows/Panther/setuperr.log
    ./Windows/Panther/UnattendGC/setupact.log
    ./Windows/Panther/UnattendGC/setuperr.log
    ./Windows/setupact.log
    ./Windows/setuperr.log
    ./Windows/System32/Sysprep/Panther/IE/setupact.log
    ./Windows/System32/Sysprep/Panther/IE/setuperr.log

  • Camera problem from the locked screen

    I am using an iphone 5s and having problems with the camera from the locked screen.
    When i flick up the locked screen to use the camera, i am given a blank screen. When i press the home button the camera quickly appears before returning me to the locked screen.
    If i want to use the camera i have to unlock the phone.

    Try resetting your device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the Slide to Unlock screen redisplays, see if the camera will now come up with you slide up.
    Cheers,
    GB

Maybe you are looking for

  • Restrict data in R/3 side

    HI, We have 6 years of historical data in R/3 side, from that we have to take 2 years of  data. How to take the historical data for 2 years( Thanks Sudha

  • Question regarding Free Items

    Hello All- We are using SRM version 4.0 and we have implemented both Standalone and Extended Classic scenario. Using ECS scenario, we have a requirement to create Purchase orders with $0 at line item level. Few lines in the Purchase order will have p

  • Query to select employed in a second job

    My table Has EmployeeId, JobId, StartDate and EndDate. There are three possible employment statuses: 1. Employed in their first job, therefore EndDate is NULL 2. No longer employed so their EndDate IS NOT NULL 3. Employed in a second or subsequent jo

  • Kernel cnfiguration to get packet injection working with iwl4965

    Hello, I'm trying to configure my kernel to be able inject packets with intel wifi card using iwl4965 driver. According to this: http://aircrack-ng.org/doku.php?id=iwlagn i need configre wifi options like this: Networking -> Wireless : [M] Improved w

  • Stopping embedded video from loading multiple times

    Hi, just started using Edge Animate. I have some experience with Flash and After Effect so the layout is pretty familiar to me. I have no background in coding so I am very happy that it generates codes for me. My goal is to make a simple html5 site w