Lock screen hangs after the installation of ios7 in my iphone4s

my iphone 4s hangs several times after the instalation of ios7. needs to be restarted several times in a day. plese give solutions

Hello RajPuth,
Thank you for using Apple Support Communities!
Since restarting the phone does not seem to be resolving the issue, I would next reset the phone.
Resetting your device
If your device stops responding, you can reset it by pressing and holding both the Sleep/Wake and Home buttons for at least ten seconds, until the Apple logo appears.
From: iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, I would next backup the phone to iTunes and before you restore your backup, I would test the performance of the phone and make sure that its ok. When it is, restore your backup and verify that it is still performing as expected.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Take care,
Sterling

Similar Messages

HT1430 my iphone 5 is not responding after the installation of ios7 ?

MY IPHONE 5 IS NOT RESPONDING AFTER INSTALLING IOS7 TODAY. NOT EVEN
ABLE TO POWER OFF.
Is there anybody to help me?

Perhaps if YOU STOP SHOUTING someone will help you.
What have you done to troubleshoot thus far? Have you taken the steps recommended in the User Guide (restart, reset, restore from backup, restore as new)

Iphone 4s(ios 7) hangs after i reject calls by pressing the on/off button while it is in the lock screen.I restart the phone every time when i reject calls..what can i do ?

iphone 4s(ios 7) hangs after i reject calls by pressing the on/off button while it is in the lock screen.I restart the phone every time when i reject calls..what can i do ?

I've same problem in iPhone 5c. I was using iPhone 4, problem appears after updating to ios7. I changed my phone to iPhone 5c, looks like it's a bug in ios7. But I think you might not turn on or off your internet connection frequently to reduce this problem. My friend has a same iPhone she never gets such problem like this cause she uses iPhone 5c with Tata Docomo (India) 2g with no internet connection. May be this would be the best solve that you should not turn on or of your internet connection so frequently...
Do any one have any better idea?

Why the 'decline' option not present in the lock screen for an incoming call in ios7?

Why is there no call decline option on the lock screen for an incoming call in IOS7??

Yeah... One workaround is double-click the lock button. But still it's stupid. The "Decline" is available only when screen in 'unlocked'. They think, you only need the to decline only when you are busy doing something on the iPhone, else need not to decline the call i.e. when your screen is locked.
WTH, is my phone the only thing in the world, I could be busy with to decline??

What can I do to recover data from my iPhone 4s? The phone fail to come on again after the installation of the new iOS8. The phone is locked and I didn't make any backup before the updating installation. Inside I have very important info.

I Have problems with my iPhone 4s after the installation of the new iOS8, the phone doesn't want to switch on again. I need to recover some important data that I have inside the phone.

Ralph Landry1 wrote:
There isn't anything you can do to recover contents from iPhone 4s if you cannot get the iPhone to startup. Connect it to a wall outlet so you have a solid power source, then do a reboot by holding both the power and home buttons until the apple logo appears, ignoring the red slider if that appears. If the iPhone still will not startup, the next options to try will automatically erase your iPhone all of its contents.
The next step is to do a restore via the recovery mode as described in http://support.apple.com/kb/HT1808 but again note that this erases the iPhone.
Thank you Landry, it is really a good experience to solve problem of iPhone Data Recovery!

Satellite U400-22n and Win7 - screen hangs after 5 min

Hi, This is my first post
Ive purchased a new U400 with Vista preinstalled, last week ; 2 days ago Ive upgraded to windows 7 32bit professional when I stared Installing it windows prompted me that it requires a full installation , so I done a normal full install, windows 7 installed normally .
Now my screen hangs after 5 min and windows gos black and reboots after 3-5 min, Ive downloaded all the drivers from the Toshiba site Ive used the auto detect, and installed the drivers one by one and tested if the reboot stops , Ive reinstalled windows now 4-5 time returned my copy to the shop and got a new copy of the windows DVD, its the same,
Please has some one any advice for me. As the shop Ive perched this from will not upgrade to windows 7 for me.

hi Mather,
any bluescreens visible?
win7 32bit i guess...
you have to install all the drivers for win7 provided by toshiba in the right order!
first chipset and patchfiles if available...
i think a clean install will do the job!
make sure that the hdd is error free!
you can upgrade from vista 32bit to win7 32bit
but no chance to upgrade to a win7 64bit when a vista 32bit is installed...

Who kills your iPod after the installation of iPod updater?

Hello all,
First, sorry for my poor English. I am not a professional nor a technician and I could be wrong, so please correct me. There are many problems reported mainly from the PC users that their iPod can't be recognized nor mounted after the installation of the latest iPod updater. Most of them claimed that the iPod updater kills their beloved iPods. Before we jump to a conclusion, we must understand what is iPod, and how does the iPod update work.
I believe that iPod equals a basic computer and need a OS in order to communicate with the PC. Installation the Updater will format the Hard disk of the iPod and then install the simple OS, so if we open the iPod updater file, it will show a window with two buttons i.e. Restore and Update, an Update is to copy the latest OS over the old version, but the Restore will format the hard disk before it install the OS over it. And importantly, during this process, the iPod needs sufficient of power to complete the upgrade, however, the problem comes just after the format, and the PC's USB (only 2 will work not 1.1) does not supply the stable power,even some cases that iPod does not get charge in the half way of installatin (a proper installation, you will see a running bar showing on the iPod screen just after the format), so you can imagine a hard disk got format but only got an uncompleted OS, of course, the iPod would not get recognized and mounted, and do not manage to communicate with the computer. At this stage the iPod will show a Sad iPod icon, a folder with exclamaiton points or a battery charging icon.
So, what would you do when it reach at this stage, a Reset would not work, and you would not able to do the Restore as the iPod is totally unrecognized by the computer.
Therefore, is there anyway to solve this problem, in my opinion and from my past experience, the answer is "yes", the simple way is to put your iPod in Disk Mode, when it plug to the computer, it will show as an external Hard Disk, you must fix it by doing a format (RESTORE would not work at this stage as it still can't recognized and mounted), in Mac we can use "Disk Utility" but the XP would not allow you to do the format in FAT32. After the formatting, replug the iPod with the computer, then it can be mounted and allow you to do the RESTORE.
In addition, I find an interesting point is, if your iPod formatted with a Mac, you will have better chance to be mounted with a PC, even your iPod does not complete the process of the installation of the iPod updater, and a PC formatted iPod will be likely to be fixed by a Mac as well.
How should we do before the update of the lastest software, for the XP user please do the following:-
1. Go to the system restore and create a check point in order to revert back to the previous version of the iPod updater, or do the back up using the 3rd party software such as Ghost or Go Back.
2. To have a test and make sure the PC's USB works properly. You can use the iPod or a PDA, and just make sure it got charged.
3. Have your iPod a full charge before the installation of the iPod updater
So, who is the main killer for the iPod?
For further infomation please read the following link - which wrote by a groups of great people - thank you guys
http://discussions.info.apple.com/webx?128@@.68ae8668

Hello Shanker Ghimire,
Please try run the following command:" devenv /resetuserdata " to have a test, it will clear all your settings.
By the way, have you ever got any error when install that Visual Studio SDK?
In case there are some unknown errors, I'd like to ask you for some logs. Please use
http://aka.ms/vscollect
to gather the installation logs. After using it, you will find vslogs.cab from %temp% folder. Please upload the file to
https://skydrive.live.com/
and share the link here.
Best regards
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.

Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.
Thank you for all of your answer.

I've seen it mentioned on here that a PRAM reset may solve it:
Reset PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P and R.
You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Hello after the installation of new software iso 6.0 I can not find youtube any more. Where is it now? Thank you.

Hello after the installation of new software iso 6.0 I can not find youtube any more. Where is it now? Thank you.

The YouTube app is not included in iOS 6. You will either need to try one of the YouTube apps from the store (there is an iPhone optimised app from google), or try accessing it via Safari : http://m.youtube.com (you can create a home screen shortcut for the site)

TS1398 Since upgrading to ios6, all apple devices (new ipad, 2 iphone4 & itouch) are having difficulty reconnecting to the home hub wifi network. I.e, every time the lock screen comes on, the wifi connection is lost when you reopen the device. It's an ios

Since upgrading to ios6, all the family's apple devices (new ipad, 2 iphone4 & itouch) are having difficulty reconnecting to the home hub wifi network. I.e, every time the lock screen comes on, the wifi connection is lost when you reopen the device and we have to reconnect through settings. This appears to be an ios6 software issue.
Is there a solution to this wifi connection issue or do we wait for a software fix?
I'd hate to think Apple is going down the Microsoft path, of passing untested software onto the user. What ever happened to Regression Testing, to ensure the existing functionality remains intact?
I bought into the Apple dream, because it was intuitive, reliable & enjoyable to use, all the things that Microsoft windows isn't.
Other issues we are experiencing are, Games are stuttering and the kids really miss the old YouTube app.
Please Mr Browett, sort these issues out.

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
~~~~~~~~~~~~~~~~
YouTube is not now part of iOS 6.
However, you can go to the App Store and do a search using YouTube. You can download several YouTube apps: YouTube (for the iPhone, a IPad app is in work), several users like Jasmine and YouPlayer.
 Cheers, Tom

IOS 5 - Notification are not showing in the lock screen knowing that the option view in lock screen is active ?

Hi ,
After Upgade my iphone4 to ios 5 , Notifications are not showing in the lock screen knowing that the option view in lock screen is active ?
Regards
HM

I experience this also sometimes (whatsapp), is this a bug??
sometimes when a person writes 2-3 messages in a row (for instance) in whatsapp (im in standby mode), it sometimes only displayes ONE message in lock screen mode (though he/she wrote more than 1), and sometimes shows the right corresponding written messages!
Why is this?
its really annoyoing when you get messages in lock screen mode BUT it doesnt stay and remain so you notice it. That way you get missed messages etc and notices it first...when doing the "pull-down list".
FIX THIS

Lock screen freezes after ios 7 update

lock screen freezes after ios 7 update

exactly what happened, the screen is locked on the plug sign, what can you do to unfreeze

Not able to open Admin Tool in OBIEE 10.1.3.1 after the installation

Hi Friends,
After installing OBIEE (10.1.3.4.1 in Windows) i am not able to open Admin tool,when i click on the Administration it doesnt respond and i dont see any error message either.i have installed 10.1.3.1 several times before and i never faced this type of issue.I re-installed 4- 5 times and overwritten the existing s/w but still see the same issue.I am able to start the services and default RPD is working fine but not able to open the RPD and also i am able to launch the Catalog Manager.
I searched online but it didn't help me,please share if anyone has faced the similar issue before and found the resolution.

i tried to launch the Admin tool from OracleBI\server\Bin after the installation but its not responding,seems issue with Admin Tool as i am able to launch other applications.

There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

Nah - that's just the normal boot process.
Clinton

I have upgrade to Ios5 but after the installation was complete I found that the App Store and Itune are displayed in French version

I have upgrade to Ios5 English version but after the installation was complete I found that the App Store and Itune are displayed in French version.

But the model no. of my iphone i.e A1303 is of 3GS as clearly mentioned here >> http://support.apple.com/kb/HT3939. Then how its become 3G.

Lock screen hangs after the installation of ios7 in my iphone4s

Similar Messages

Maybe you are looking for