Lock screen sounds muted after Siri use?

Hey!
I just discovered a weird thing that happens on the lock screen. I tested this on an iPhone 4S, iPod touch 5th gen and iPad 3rd gen, all giving the same results.
So here's the trick:
- Wake up device, then hold down home button to activate Siri
- Tap outside Siri area to close Siri
- Now, when you unlock your device, even with a passcode, the unlocking sounds won't sound. You can lock and unlock your device about 3-4 times after that and there will still be no sound. After a few goes, the sound suddenly returns.
It's just a little glitch I found. Help? Or tell Apple?

Yeah it does! Maybe you're not on iOS 6.1.3. I've also found it happens if you're typing, say in notes. The keyboard clicks don't sound, but eventually come back.
Are you speaking to Siri? Just activate it and tap out of it (not with home button) without saying anything.

Similar Messages

  • I have i phone 4s ,,, some times i hear the lock screen sound

    I have i phone 4s ,,, some times i hear the lock screen sound & other time not...
    Also when try to play a saved video there is no sound ...
    When i hear lock screen i can hear the videos sound ...
    Also i can't hear the alert tones just make a vibration ...
    I try to check every thing about sound setting but no solution....

    Hello, Ayman Refaat. 
    Thank you for visiting Apple Support Communities.
    Here are a couple articles I would recommend going through when experiencing this issue.  Make sure to check the vibrate switch is not engaged as it can cause some application audio, keyboard sounds and ringtones to be mute.
    iPhone Buttons
    http://support.apple.com/kb/ta38625
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Cheers,
    Jason H.

  • Lock Screen wallpaper gone after 6.1.1 upgrade.

    Lock Screen wallpaper gone after 6.1.1 upgrade.  I tried resetting wallpaper and rebooting, but lock screen stays at default black background with battery.  Anyone else notice this?

    That's what happens when you are charging. Is your iPhone plugeed in?

  • TS3694 After updating to iOS 6.1.2, iPhone 5 got problems which are lock screen, Sounds, syncing iTunes?

    After updating to iOS 6.1.2, iPhone 5 can't connect to iTunes. When i am trying to connect, then i can connect. After secods, the phone is not connecting with iTunes again. Then Automatically connect to iTunes again by itself.  
    My sound works with headphones, the alarm works, ringer works but can not listen to any music/videos without headphones plugged in.
    Then lock screen bugs; bypass fumble. When I start to open the iPhone and swiping is heavily to do on the slide to unlock. What's the matter with it?

    firstly thanks for quick reply.
    sorry sir,
    i am confused in last line you wrote,
    " This will erase the phone but you will be given an option at the end to restore to an existing backup, if you have one."
    i did not understand last sentence  -  if i have one? you mean to say if i have data or not in my iphone?
    i have many pictures, messages, contacts which are very much important.
    so will it be all restore and will be backup again in my iphone if i restore?
    i am extremely sorry to interrupt you again.
    waiting for your quick reply
    thanks and regards,
    vishal

  • Camera icon on lock screen is disappeared after playing sound in protect website

    Hi, My Q10 does not set password.I turn on Blackberry Protect function, and go to website test play sound part.My phone can receive that and play noise sound.After that, camera on lock screen is disappeared. there is a way to make it appears again: - Set password for phone- do not enter lock screen, press power button to turn off screen- turn on screen , camera icon will appears p/s: hold down K key to enter clock screen will not help, you have to use power buttton

    Hi, what do you mean by "does not set password" ? and why are you experimenting with BB Protect... Flagging your device as stolen is a very serious thing (even by mistake)..Please clear few things:What OS you are on right now?..Did you recently upgraded your device software?..have you done the security wipe recently? 1. Set password for phone: Go to settings / Security and privacy / Device password / Set password for your device > scroll down to "Lock device after" option and set device lockout time. 2. do not enter lock screen: by that i think you mean phone is not locking itself,, first go to Settings / Advance Interaction / disable Hold to stay awake.... (i am not sure but you can try this) 3. turn on screen, camera icon will appears: "please provide the complete information"

  • Is anyone else having issues getting screensavers and the lock screen to work after installing Mavericks?

    I recently installed Mavericks and now my computer refuses to lock after sleep. Instead of a box that asks for a password to access the computer again, it just opens up back to where it was before sleep. In fact, I can't even get my screensaver to work. I have the screensaver set to one minute (to attempt to get it to work) and it wouldn't even come on. The sleep/lock screen is set to ask for password as soon as it's woken. Same goes for when I open my laptop after it's last use. No password, just instantly on. Is anyone else having this issue? If so, how can I fix it? Thanks!

    I had the exact same problem.. and thank you for the answer..
    It actually makes sense, but I had the 'bouncing camera' problem and never thought of the 'slide'..
    Dohhhhh
    cheers for the post

  • The menus become locked up and unselectable after some use of firefox, will work when restarts but have to keep restarting?

    The pull down menus at the top become locked or frozen and unselectable after some use of firefix. When I restart it is fine again for a while. Also I cannot type into the url bar when this happens. I have never had any problems before with firefox so I hope this can be remedied!

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the ''Safe mode'' start window.
    You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

  • Video Sound muted after a few minutes

    Hi, guys. Since i updated my ipod and this happened a few time already. Video was playing fine but after a minute, the audio muted. Annoying, everytime i need to rewind so the sound will be back on. But again after a few minutes, the sound muted. Everytime i needed to rewind back a little to get back the sound on. Any idea of how to fix this problem?

    You have to "update" it back to v 1.0 in order to stop these problems. It seems every single Ipod in existance will act this way with movies not bought through iTunes with ver 1.1.
    Someone should sticky a thread where it's explained how to revert back to v. 1.0 and that it's currently the only way to prevent these stupid freezes.

  • IPad lock screen renders wrong after reboot configurator 1.6

    After much frustrating trial-and-error, I have finally got my iPads (20, ipad 2 and 3 mixed, for library checkout) to consistently restore properly.  The only problem is that when you reboot the ipad the lock screen picture (installed through ocnfigurator) renders poorly. any ideas?

    Similar problem here -- after a refresh the iPad wallpaper is crisp and centered, but then after rebooting the iPad the wallpaper is no longer centered and quite pixellated.

  • Lock screen timeout issue after Lollipop upgrade - Galaxy S5

    I have the S5, and a couple days before installing the Lollipop update I changed my screen timeout to 30 mins because I didn't want my screen to turn off while looking at pictures for long periods of time. I didn't end up changing the timeout back before the update, so after installing Lollipop, it applied the 30 min timeout to my lock screen and I am unable to change it to a lower setting. I've tried changing the timeout settings under display and all sorts of variations of settings in the phone, and it works when I am actually past the lock screen, but lock screen still doesn't turn off until 30 mins passes.
    The main problem with this is when my phone gets notifications in the middle of the night, the phone stays on for the full 30 mins and drains my battery if it isn't plugged in. Is anyone else having this issue? I haven't tried reverting back to Kit Kat to see if I can fix the issue, but I was just curious if there was another way to get around it before going through all of that. It would be really helpful if they would just add a timeout feature specifically for the lock screen so that I could adjust it there...

    This has been reported on some other blog sites I recall seeing and the quick fix was to disable your lock screen.

  • My iPhone 5 lock screen is unresponsive after iOS 7 update.

    It's weird because the new iOS worked for about a day then started to act laggy. When I restarted the phone the lock screen is totally unresponsive.
    All help appreciated.
    M

    Oh, and yes, I have already done the hard reset trick of holding down power and home keys at same time.
    Also tried to restore through iTunes but it won't let me because I have "find my phone" turned on and it tells me to turn it off before I can restore it. But it can't even get into the iPhone settings to make the changes.
    I like the look and feel of iOS 7, but I wish it would actually work.
    m

  • Sound muted after iTunes 7.4 update

    Hello
    Today I updated to iTunes 7.4 after doing so I no longer have any sound. The startup chimes work, but after that no other sound or music can play. I go to sound preferences and the mute button is dimmed and cannot be changed. Anybody else have this problem? Any suggestions??
    Thanks
    Mike

    Yes here are some screen shots. I have never used the midi setup so am I missing it someplace I have looked several times.
    http://www.eclecticpixel.com/midisetup.png
    http://www.eclecticpixel.com/mididevices.png

  • IPhone 3GS works fine, unless I the screen goes black after no use.  Then I'm stuck on the white screen until I reset the phone.

    The title kind of sums it up.  After having my 3GS for over a year without issue, it started acting up today.  I had my phone on my desk at work, and had been checking my e-mail, news, and web intermittently throughout the morning.  I set the phone down, in it's typical spot without issue.  No dropping, no hits, no...nothing.  Just set it on the desk and go about my work.
    The next time I pick up the phone to use it, and hit the button, I'm greeted with an all-white screen.  WTH?  If I press and hold the home button the phone makes a "dunk" soud, like maybe I'm enabling the voice feature.  Long story short, I can restart the phone, and reset the phone, and it's fine.
    UNTIL the screen goes dark from inactivity.  From that point on, it will ONLY come back in the full-white-screen mode UNTIL I reboot it again, in which case it's again functioning normally...UNTIL the screen goes black from inactivity.  I can hear the phone make text-alert noises as texts come in, my e-mail continues to download regularly, etc.  But it stays stuck in this white screen anytime the battery saver turns the screen black.
    Any ideas on this?

    So, I've received and installed a replacement digitizer screen / component.  The good news is that the digitizer works just fine!  Screen swipes, finger tracking, etc are all great.
    The bad news...is that it didn't fix my white screen issue.  Same symptoms...everything works fine at boot.  As long as I keep the screen from going dark, everything continues to work fine (rapidly consuming battery, of course).  If, at any time, the screen goes dark (get a call, accidentally press the top button to shut down the screen, etc), the screen will only come back on as a white screen. 
    All touch components are working fine at this time.  I've grown to remember where the "power down" swipe is located, so I press and hold the power down button, then swipe where I know the "power down" swipe is located.  Phone will shut down.
    Restart the phone, and repeat the process.  Anyone have any other ideas? 

  • Windows XP sounds muted after skype call

    I have been running skype on my wndows XP system with no problem until today. I've recently updated to the latest skype (ver.7.2) and just made my first skype call since the update.
    What happened after the call is that all windows sounds have gone mute.
    I've checked all sound settings both in skype and XP, rebooted the system - nothing helps.
    But i've noticed a weird thing - when I start a skype call (e.g. sound testing service) all sounds come back on! When I end the call, the system goes mute again....
    Any ideas on how to solve the problem? I'm pretty sure it's a glitch of the latest skype version. Is there a way to roll back to the previous version?

    I have the same problem since using Skype yesterday on a laptop running Windows XP. Skype is the only program that seems to be able to produce any sound, both with onboard speakers and headphones. Does this have anything to do with the latest Skype update?

  • Why has my music controls in the locked screen stopped working after upgrading to ios. 7.0.2?

    I cannot pause, advance track, etc with the in-control feature on ios 7. When my phone is locked and the music is playing, (ie. iTunes, podcasts or any other audio enabled app) the play controls do not work even when I access the in-control feature.  I remember this working after I updated. Now it's not. Anyone else had this issues or know a fix?

    I have the same issue. with iphone5 with iOS 7.0.2

Maybe you are looking for