Lock Time Out Error
Hi,
When I run the 'Insert Update Delete' example from the Tutorial, the update and delete work fine, but the moment I try to do an Insert, I get the following error:
SQL Exception: Lock Time Out, Please Try laterHas anybody else had this problem? i'm running the example with the Pintbase database shipped with JSC.
Regards
Haroon
Hi
I had the same problem when I try to run the application. Went away after restarting the pointbase. Try to stop and start the pointbase.
Thanks
Srinivas
Similar Messages
-
Time out error 1.6 million internal table fields are computed using FMs
Hi , All ...
The Report running fine in server with less 300 record but ...production server which has 1.6 million record it gives error as time-out error and takes hell amount of time.
Please suggest ugently ..
I have tried few things
Internal table having 1.6 lacs ... fields to compute .. i have token in a batch
loop at i_cinfo into s_cinfo from 1 to 100000.
and so on ...also applied all the performace related .. like indexs, work areas , deleting adjacent duplicates , for all entries ..wherever applicable.
Please Suggest .
Report is as below
REPORT ZUSOTCBD_CREDIT_REPORT .
TABLES : KNA1, " General Data Customer Master
KNB1, " Customer Master (Company Code)
KNC1, " Customer master (transaction figures)
KNKK, " Customer master credit management: Control area data
T009, " Fiscal Year Variants P
T009Y, " Shortened fiscal years in Asset Accounting P
T001, " Co. Codes
T001CM, " Permitted Credit Control Areas per Company Code
RF42B, " Structure to hold credit data.
RF035, " Structure to hold credit managment fields
RF02L, " Structure to hold credit data.
TRAS, " Interval for Days in Arrears P
T000CM. " Data for DSO calculation.
Types
TYPES:
BEGIN OF type_final,
string(50) TYPE c, " String Value for Title
END OF type_final.
data:wa_final TYPE type_final. " Work Area to hold Title Data
DATA: RASID TYPE RF035-RASID value 'R03N'. " For Days in interval
DATA: MONAT(2) TYPE N.
DATA: GJAHR TYPE KNC1-GJAHR.
DATA: LD_PERIODS(32) TYPE N
VALUE '01020304050607080910111213141516'.
DATA sytabix type sy-tabix.
DATA LAND TYPE KNA1-LAND1 VALUE 'US'. " Country Key
DATA: LD_PERIOD TYPE BSID-MONAT, " Fiscal Year Variant
LD_GJAHR TYPE KNC1-GJAHR,
LD_COUNTER TYPE SY-TABIX.
Internal Tables
Internal table to hold Title Data *
DATA:
i_final TYPE STANDARD TABLE OF type_final.
**Internal Table Permitted Credit Control Areas per Company Code
DATA: BEGIN OF TCMTAB OCCURS 10.
INCLUDE STRUCTURE T001CM.
DATA: END OF TCMTAB.
*Internal table to store Customer no.
DATA : BEGIN OF ICUST OCCURS 0,
KUNNR TYPE KNA1-KUNNR, " Customer No.
END OF ICUST.
DATA: BEGIN OF BUKTAB OCCURS 20,
KKBER LIKE T001-KKBER, " Credit Control Area
BUKRS LIKE T001-BUKRS, " Co. Code
WAERS LIKE T001-WAERS, " Currency
PERIV LIKE T001-PERIV, " Fiscal Year Variant
BUTXT LIKE T001-BUTXT,
END OF BUKTAB.
Internal Table to store Fiscal year Data .
DATA: BEGIN OF GJATAB OCCURS 5,
PERIV LIKE T001-PERIV, " Fiscal Year Variant
GJAHR LIKE KNC1-GJAHR, " Fiscal Year
MONAT LIKE T009-ANZBP, "
ANZBP LIKE T009-ANZBP, " Number of posting periods
END OF GJATAB.
*Main Output internal table to be used to store credit history Information
DATA : BEGIN OF I_CINFO occurs 0,
KUNNR TYPE KNB1-KUNNR, " Customer
KNKLI TYPE KNKK-KNKLI, " Customer's account number with credit limit reference
KKBER TYPE KNKK-KKBER, " Credit Control Area
CTLPC TYPE KNKK-CTLPC, " Risk Category
KLIMK TYPE KNKK-KLIMK, " Credit Limit
SBGRP TYPE KNKK-SBGRP, " Credit representative group for credit management
ERDAT TYPE KNKK-ERDAT, " Created On
DTREV TYPE KNKK-DTREV, " Last Internal Review
REVDB TYPE KNKK-REVDB, " Last External Review
SALDO TYPE RF42B-SALDO, " Balance
DSOIN TYPE RF02L-DSOIN, " DSO
H06SA TYPE RF035-H06SA, " Highest Balance at the end of 6 Months
H06JA TYPE RF035-H06JA, " Year highest Balance 6 Months
H06MO TYPE RF035-H06MO, " Month OF hihest Balance 6 Months
H12SA TYPE RF035-H12SA, " Highest Balance at the end of 12 Months
H12JA TYPE RF035-H12JA, " Year highest Balance 12 Months
H12MO TYPE RF035-H12MO, " Month OF hihest Balance 12 Months
UMP2U TYPE RF42B-UMP2U, " Sales from the current Year
UMP1U TYPE RF42B-UMP1U, " Sales from the Previous Year
SFAEL TYPE RF035-SFAEL, " Total Past Due Open Item
SFAE1 TYPE RF035-SFAE1, " Aging buckets 0-15
SFAE2 TYPE RF035-SFAE2, " Aging buckets 16-30
SFAE3 TYPE RF035-SFAE3, " Aging buckets 31-60
SFAE4 TYPE RF035-SFAE4, " Aging buckets 60-90
SFAE5 TYPE RF035-SFAE5, " Aging buckets Over 90
END Of I_CINFO.
DATA : BEGIN OF S_CINFO ,
KUNNR TYPE KNB1-KUNNR, " Customer
KNKLI TYPE KNKK-KNKLI, " Customer's account number with credit limit reference
KKBER TYPE KNKK-KKBER, " Credit Control Area
CTLPC TYPE KNKK-CTLPC, " Risk Category
KLIMK TYPE KNKK-KLIMK, " Credit Limit
SBGRP TYPE KNKK-SBGRP, " Credit representative group for credit management
ERDAT TYPE KNKK-ERDAT, " Created On
DTREV TYPE KNKK-DTREV, " Last Internal Review
REVDB TYPE KNKK-REVDB, " Last External Review
SALDO TYPE RF42B-SALDO, " Balance
DSOIN TYPE RF02L-DSOIN, " DSO
H06SA TYPE RF035-H06SA, " Highest Balance at the end of 6 Months
H06JA TYPE RF035-H06JA, " Year highest Balance 6 Months
H06MO TYPE RF035-H06MO, " Month OF hihest Balance 6 Months
H12SA TYPE RF035-H12SA, " Highest Balance at the end of 12 Months
H12JA TYPE RF035-H12JA, " Year highest Balance 12 Months
H12MO TYPE RF035-H12MO, " Month OF hihest Balance 12 Months
UMP2U TYPE RF42B-UMP2U, " Sales from the current Year
UMP1U TYPE RF42B-UMP1U, " Sales from the Previous Year
SFAEL TYPE RF035-SFAEL, " Total Past Due Open Item
SFAE1 TYPE RF035-SFAE1, " Aging buckets 0-15
SFAE2 TYPE RF035-SFAE2, " Aging buckets 16-30
SFAE3 TYPE RF035-SFAE3, " Aging buckets 31-60
SFAE4 TYPE RF035-SFAE4, " Aging buckets 60-90
SFAE5 TYPE RF035-SFAE5, " Aging buckets Over 90
END Of s_cinfo.
*Internal table to hold month-wise balance.
DATA: BEGIN OF SALTAB OCCURS 12,
LNUMM(2) TYPE N, " Month
SALDO LIKE RF42B-SALDO, " Balance
END OF SALTAB.
*Internal table used for computing the Balance fields
DATA: BEGIN OF SALDO,
UML01 LIKE KNC1-UM01S,
UML02 LIKE KNC1-UM01S,
UML03 LIKE KNC1-UM01S,
UML04 LIKE KNC1-UM01S,
UML05 LIKE KNC1-UM01S,
UML06 LIKE KNC1-UM01S,
UML07 LIKE KNC1-UM01S,
UML08 LIKE KNC1-UM01S,
UML09 LIKE KNC1-UM01S,
UML10 LIKE KNC1-UM01S,
UML11 LIKE KNC1-UM01S,
UML12 LIKE KNC1-UM01S,
END OF SALDO.
Structure to hold Bal fields ------ -------
DATA: BEGIN OF SKNKK,
KUNNR LIKE KNA1-KUNNR, " Customer Number 1: Debitor
KONTO LIKE KNKK-KUNNR,
SFAE1 LIKE RF035-SFAE1, " Aging buckets 0-15
SFAE2 LIKE RF035-SFAE2, " Aging buckets 16-30
SFAE3 LIKE RF035-SFAE3, " Aging buckets 30-60
SFAE4 LIKE RF035-SFAE4, " Aging buckets 60-90
SFAE5 LIKE RF035-SFAE5, " Aging buckets Over 90
SFAEL LIKE RF035-SFAEL, " Total Due of Items
UML01 LIKE KNC1-UM01S,
UML02 LIKE KNC1-UM01S,
UML03 LIKE KNC1-UM01S,
UML04 LIKE KNC1-UM01S,
UML05 LIKE KNC1-UM01S,
UML06 LIKE KNC1-UM01S,
UML07 LIKE KNC1-UM01S,
UML08 LIKE KNC1-UM01S,
UML09 LIKE KNC1-UM01S,
UML10 LIKE KNC1-UM01S,
UML11 LIKE KNC1-UM01S,
UML12 LIKE KNC1-UM01S,
UMP1U LIKE RF42B-UMP1U, " Sales from the Previous Year
UMP2U LIKE RF42B-UMP2U, " Sales from the current Year
SALDO LIKE RF42B-SALDO, " Balance
END OF SKNKK.
DATA : BEGIN OF ICUST1 OCCURS 0,
KUNNR TYPE KNA1-KUNNR, "For Customer Filter.
END OF ICUST1.
**Internal table to hold fiscal varriants
DATA: BEGIN OF LT_PERIODS OCCURS 12,
PERIOD LIKE BSID-MONAT,
GJAHR LIKE KNC1-GJAHR,
END OF LT_PERIODS.
**Constants
constants : BUKRS1 TYPE KNB1-BUKRS VALUE '1000',
BUKRS2 TYPE KNB1-BUKRS VALUE '1031',
Recs Type i value '200',
B_count type i value '2'.
INITIALIZATION
INITIALIZATION.
IF RASID IS INITIAL.
SELECT * FROM TRAS.
EXIT.
ENDSELECT.
IF SY-SUBRC = 0.
RASID = TRAS-RASID.
ENDIF.
ENDIF.
SELECTION-SCREEN
parameters : p_path type rlgrap-filename default 'C:\Documents and Settings\C890971\Desktop\Credit_history.XLS'.
Start of selection processing
START-OF-SELECTION.
**Get Customers for Co. Code 1000 & 1031.
PERFORM GET_CUST.
Get / Compute Credit Information data for Company Codes 1000 & 1031.
PERFORM GET_CREDIT_DATA.
End of selection processing
*END-OF-SELECTION.
Listing Credit History Data
PERFORM DOWNLOAD_CREDIT_DATA.
S U B R O U T I N E S
*& Form GET_CUST
text
--> p1 text
<-- p2 text
FORM GET_CUST .
Get US only Customers.
Refresh icust.
Select kunnr from kna1 appending table icust
where Land1 = land.
**Delete duplicate records
Delete Adjacent duplicates from icust comparing kunnr.
if icust[] is not initial.
Limit the selection some more to Co. Code 1000 & 1031
As join will cost overhead as compared.
Select kunnr from knb1 into table icust1
for all entries in icust
where kunnr = icust-kunnr
and bukrs = bukrs1
OR bukrs = bukrs2.
**Delete duplicate records
Delete Adjacent duplicates from icust1 comparing kunnr.
endif.
**Free memory.
Free icust.
Credit Control Area
select * from T001CM into table TCMTAB
where bukrs = bukrs1 OR
bukrs = bukrs2.
ENDFORM. " GET_CUST
*& Form GET_CREDIT_DATA
text
--> p1 text
<-- p2 text
FORM GET_CREDIT_DATA .
DATA : L_TEXT(60) TYPE C ,
Ltext1(50) type C value 'Computing Credit-History Data For',
Ltext2(10) type C value 'Customers',
L_PCT type i value '10',
L_recs type i,
l_batch_recs type i,
l_s_rec type i value 1,
l_recs1(7) type N.
***Fetch data from KNKK table
PERFORM GET_KNKK_DATA .
***Computing Crredit Fields
**Number of Customers For whom Deatils needed.
Describe table I_CINFO lines l_recs.
l_recs1 = l_recs.
Concatenate Ltext1 l_recs1 Ltext2 into l_text separated by ' '.
PERFORM GET_PGRESS_INDICATOR USING l_text l_pct.
***If records are more than 200000, should be processed batch-wise
If l_recs > recs.
l_batch_recs = abs( l_recs / b_count ).
Do b_count times.
loop at i_cinfo INTO S_CINFO from l_S_REC to l_batch_recs.
**Remember the row
sytabix = sy-tabix.
**Compute DSO
PERFORM GET_DSO_FIELD .
Compute rest credit history data.
PERFORM COMPUTE_SFIELDS.
endloop.
l_S_REC = l_S_REC + l_batch_recs.
l_batch_recs = l_batch_recs + l_batch_recs.
IF l_batch_recs ge l_recs.
l_batch_recs = l_recs.
eNDIF.
Commit up to here to release the DB locks.
Commit work.
enddo.
else.
loop at i_cinfo INTO S_CINFO.
**Remember the row
sytabix = sy-tabix.
**Compute DSO
PERFORM GET_DSO_FIELD .
Compute rest credit history data.
PERFORM COMPUTE_SFIELDS.
endloop.
Endif.
ENDFORM. " GET_CREDIT_DATA
*& Form GET_KNKK_DATA
text
-->P_ICUST_KUNNR text
FORM GET_KNKK_DATA .
if icust1[] is not initial.
SELECT KUNNR KNKLI KKBER CTLPC KLIMK
SBGRP ERDAT DTREV REVDB
from KNKK into corresponding fields of table I_Cinfo
for all entries in icust1
where kunnr = icust1-kunnr.
Delete Adjacent duplicates from i_cinfo comparing kunnr.
endif.
**Free Memory for internal table icust1.
Free icust1.
ENDFORM. " GET_KNKK_DATA
**& Form GET_DSO_FIELD
text
--> p1 text
<-- p2 text
FORM GET_DSO_FIELD .
***Determine DSO Parameter
PERFORM DSO_PARAMETER.
***Compute DSO
CALL FUNCTION 'CUSTOMER_DSO_CALCULATION'
EXPORTING
I_KKBER = s_cinfo-kkber
I_KUNNR = s_cinfo-kunnr
I_ANZBUPER = T000CM-DSOPP
I_XCHILDS = T000CM-DSOCH
I_ACTBALANCE = T000CM-DSOAB
IMPORTING
E_DSOIN = RF02L-DSOIN
EXCEPTIONS
ERROR_MESSAGE = 1.
ENDFORM. " GET_DSO_FIELD
*& Form DSO_PARAMETER
text
--> p1 text
<-- p2 text
FORM DSO_PARAMETER.
IF T000CM-DSOPP IS INITIAL.
SELECT SINGLE * FROM T000CM.
IF SY-SUBRC EQ 0.
IF T000CM-DSOPP IS INITIAL.
T000CM-DSOPP = '003'.
ENDIF.
ELSE.
T000CM-DSOPP = '003'.
T000CM-DSOCH = ' '.
T000CM-DSOAB = 'X'.
ENDIF.
ENDIF.
ENDFORM. " DSO_PARAMETER
--> p1 text
<-- p2 text
FORM PERIODE_ERMITTELN_EXC USING
P03_BUDAT LIKE SYST-DATUM
P03_GJAHR LIKE KNC1-GJAHR
P03_MONAT LIKE MONAT.
CALL FUNCTION 'FI_PERIOD_DETERMINE'
EXPORTING
I_BUDAT = P03_BUDAT
I_PERIV = T001-PERIV
I_BUKRS = T001-BUKRS
I_GJAHR = P03_GJAHR
I_MONAT = P03_MONAT
IMPORTING
E_GJAHR = P03_GJAHR
E_MONAT = P03_MONAT
EXCEPTIONS
ERROR_MESSAGE = 1.
ENDFORM. "PERIODE_ERMITTELN_EXC
*& Form COMPUTE_SFIELDS
text
--> p1 text
<-- p2 text
FORM COMPUTE_SFIELDS .
**Compute Balance
PERFORM GET_SFIELDS .
S_CINFO-DSOIN = RF02L-DSOIN.
S_CINFO-SALDO = RF035-SALDO.
S_CINFO-H06SA = RF035-H06SA.
S_CINFO-H06JA = RF035-H06JA.
S_CINFO-H06MO = RF035-H06MO.
S_CINFO-H12SA = RF035-H12SA.
S_CINFO-H12JA = RF035-H12JA.
S_CINFO-H12MO = RF035-H12MO.
S_CINFO-UMP2U = RF42B-UMP2U.
S_CINFO-UMP1U = RF42B-UMP1U.
S_CINFO-SFAEL = RF035-SFAEL.
S_CINFO-SFAE1 = RF035-SFAE1.
S_CINFO-SFAE2 = RF035-SFAE2.
S_CINFO-SFAE3 = RF035-SFAE3.
S_CINFO-SFAE4 = RF035-SFAE4.
S_CINFO-SFAE5 = RF035-SFAE5.
modify..
MODIFY I_CINFO FROM S_CINFO INDEX sytabix.
CLEAR: S_CINFO,RF035,RF02L, RF42B.
ENDFORM. " COMPUTE_SFIELDS
text
-->P_C_INFO_KUNNR text
FORM GET_CUST_BAL_INFO.
LOOP AT TCMTAB.
CALL FUNCTION 'FI_COMPANY_CODE_DATA'
EXPORTING
I_BUKRS = TCMTAB-BUKRS
IMPORTING
E_T001 = T001
EXCEPTIONS
ERROR_MESSAGE = 1.
IF SY-SUBRC = 0.
MOVE-CORRESPONDING T001 TO BUKTAB.
BUKTAB-KKBER = TCMTAB-KKBER.
COLLECT BUKTAB.
ENDIF.
ENDLOOP.
LOOP AT BUKTAB WHERE PERIV NE SPACE.
GJATAB-PERIV = BUKTAB-PERIV.
COLLECT GJATAB.
ENDLOOP.
CLEAR: MONAT.
LOOP AT GJATAB.
T001-PERIV = GJATAB-PERIV.
CLEAR: GJAHR, MONAT.
PERFORM PERIODE_ERMITTELN_EXC USING SY-DATLO GJAHR MONAT.
CHECK SY-SUBRC = 0.
GJATAB-GJAHR = GJAHR.
GJATAB-MONAT = MONAT.
SELECT SINGLE * FROM T009 WHERE PERIV = GJATAB-PERIV.
IF SY-SUBRC = 0.
GJATAB-ANZBP = T009-ANZBP.
ENDIF.
MODIFY GJATAB.
ENDLOOP.
LOOP AT BUKTAB.
CHECK NOT ( BUKTAB-PERIV IS INITIAL ).
READ TABLE GJATAB WITH KEY BUKTAB-PERIV.
CHECK SY-SUBRC = 0
AND NOT ( GJATAB-GJAHR IS INITIAL ).
CALL FUNCTION 'CUSTOMER_BALANCE'
EXPORTING
KUNNR = S_cinfo-kunnr
BUKRS = BUKTAB-BUKRS
GJAHR = GJATAB-GJAHR
MONAT = GJATAB-MONAT
PERIV = GJATAB-PERIV
ANZBP = GJATAB-ANZBP
XH6MON = 'X'
XH12MON = 'X'
IMPORTING
UMP2U = RF42B-UMP2U
VMP2U = RF42B-UMP1U
SALDO = RF035-SALDO
UML01 = SALDO-UML01
UML02 = SALDO-UML02
UML03 = SALDO-UML03
UML04 = SALDO-UML04
UML05 = SALDO-UML05
UML06 = SALDO-UML06
UML07 = SALDO-UML07
UML08 = SALDO-UML08
UML09 = SALDO-UML09
UML10 = SALDO-UML10
UML11 = SALDO-UML11
UML12 = SALDO-UML12
EXCEPTIONS
NO_BALANCE = 4.
IF SY-SUBRC = 0.
SKNKK-UMP1U = SKNKK-UMP1U + RF42B-UMP1U.
SKNKK-UMP2U = SKNKK-UMP2U + RF42B-UMP2U.
SKNKK-SALDO = SKNKK-SALDO + RF035-SALDO.
SKNKK-UML01 = SKNKK-UML01 + SALDO-UML01.
SKNKK-UML02 = SKNKK-UML02 + SALDO-UML02.
SKNKK-UML03 = SKNKK-UML03 + SALDO-UML03.
SKNKK-UML04 = SKNKK-UML04 + SALDO-UML04.
SKNKK-UML05 = SKNKK-UML05 + SALDO-UML05.
SKNKK-UML06 = SKNKK-UML06 + SALDO-UML06.
SKNKK-UML07 = SKNKK-UML07 + SALDO-UML07.
SKNKK-UML08 = SKNKK-UML08 + SALDO-UML08.
SKNKK-UML09 = SKNKK-UML09 + SALDO-UML09.
SKNKK-UML10 = SKNKK-UML10 + SALDO-UML10.
SKNKK-UML11 = SKNKK-UML11 + SALDO-UML11.
SKNKK-UML12 = SKNKK-UML12 + SALDO-UML12.
ENDIF.
ENDLOOP.
ENDFORM. "
*& Form GET_SFIELDS
text
--> p1 text
<-- p2 text
FORM GET_SFIELDS .
sknkk-kunnr = S_CINFO-KUNNR.
**Clear target to store computed values
CLEAR: RF035.
**Compute Balance fields
PERFORM GET_CUST_BAL_INFO.
REFRESH: SALTAB.
SALTAB-LNUMM = '01'. SALTAB-SALDO = SKNKK-UML01. APPEND SALTAB.
SALTAB-LNUMM = '02'. SALTAB-SALDO = SKNKK-UML02. APPEND SALTAB.
SALTAB-LNUMM = '03'. SALTAB-SALDO = SKNKK-UML03. APPEND SALTAB.
SALTAB-LNUMM = '04'. SALTAB-SALDO = SKNKK-UML04. APPEND SALTAB.
SALTAB-LNUMM = '05'. SALTAB-SALDO = SKNKK-UML05. APPEND SALTAB.
SALTAB-LNUMM = '06'. SALTAB-SALDO = SKNKK-UML06. APPEND SALTAB.
SALTAB-LNUMM = '07'. SALTAB-SALDO = SKNKK-UML07. APPEND SALTAB.
SALTAB-LNUMM = '08'. SALTAB-SALDO = SKNKK-UML08. APPEND SALTAB.
SALTAB-LNUMM = '09'. SALTAB-SALDO = SKNKK-UML09. APPEND SALTAB.
SALTAB-LNUMM = '10'. SALTAB-SALDO = SKNKK-UML10. APPEND SALTAB.
SALTAB-LNUMM = '11'. SALTAB-SALDO = SKNKK-UML11. APPEND SALTAB.
SALTAB-LNUMM = '12'. SALTAB-SALDO = SKNKK-UML12. APPEND SALTAB.
READ TABLE SALTAB INDEX 1.
RF035-H06SA = SALTAB-SALDO.
RF035-H06MO = SALTAB-LNUMM.
RF035-H12SA = SALTAB-SALDO.
RF035-H12MO = SALTAB-LNUMM.
------ SALTAB ---------------------------------------------
LOOP AT SALTAB.
IF SALTAB-SALDO > RF035-H06SA
AND SY-TABIX < 7.
RF035-H06SA = SALTAB-SALDO.
RF035-H06MO = SALTAB-LNUMM.
ENDIF.
IF SALTAB-SALDO > RF035-H12SA
AND SY-TABIX < 13.
RF035-H12SA = SALTAB-SALDO.
RF035-H12MO = SALTAB-LNUMM.
ENDIF.
ENDLOOP.
------ Period--------------------
REFRESH LT_PERIODS.
CLEAR LD_COUNTER.
READ TABLE BUKTAB INDEX 1.
IF SY-SUBRC = 0.
READ TABLE GJATAB WITH KEY BUKTAB-PERIV.
DO GJATAB-MONAT TIMES
VARYING LD_PERIOD FROM LD_PERIODS(2) NEXT LD_PERIODS+2(2)
RANGE LD_PERIODS.
LT_PERIODS-GJAHR = GJATAB-GJAHR.
LT_PERIODS-PERIOD = LD_PERIOD.
LD_COUNTER = LD_COUNTER + 1.
APPEND LT_PERIODS.
ENDDO.
IF LD_COUNTER LT 12.
LD_GJAHR = GJATAB-GJAHR - 1.
CLEAR T009Y.
SELECT SINGLE * FROM T009Y WHERE PERIV = GJATAB-PERIV
AND GJAHR = LD_GJAHR.
DO GJATAB-ANZBP TIMES
VARYING LD_PERIOD FROM LD_PERIODS(2) NEXT LD_PERIODS+2(2)
RANGE LD_PERIODS.
IF T009Y-ANZBP > 0.
CHECK SY-INDEX <= T009Y-ANZBP.
ENDIF.
LD_COUNTER = LD_COUNTER + 1.
LT_PERIODS-GJAHR = LD_GJAHR.
LT_PERIODS-PERIOD = LD_PERIOD.
APPEND LT_PERIODS.
ENDDO.
ENDIF.
IF LD_COUNTER LT 12.
LD_GJAHR = LD_GJAHR - 1.
DO GJATAB-ANZBP TIMES
VARYING LD_PERIOD FROM LD_PERIODS(2) NEXT LD_PERIODS+2(2)
RANGE LD_PERIODS.
LD_COUNTER = LD_COUNTER + 1.
LT_PERIODS-GJAHR = LD_GJAHR.
LT_PERIODS-PERIOD = LD_PERIOD.
APPEND LT_PERIODS.
ENDDO.
ENDIF.
SORT LT_PERIODS BY GJAHR ASCENDING PERIOD ASCENDING.
LD_COUNTER = LD_COUNTER - 12.
DO LD_COUNTER TIMES.
DELETE LT_PERIODS INDEX 1.
ENDDO.
SORT LT_PERIODS BY GJAHR DESCENDING PERIOD DESCENDING.
READ TABLE LT_PERIODS INDEX RF035-H06MO.
RF035-H06MO = LT_PERIODS-PERIOD.
RF035-H06JA = LT_PERIODS-GJAHR.
READ TABLE LT_PERIODS INDEX RF035-H12MO.
RF035-H12MO = LT_PERIODS-PERIOD.
RF035-H12JA = LT_PERIODS-GJAHR.
ENDIF.
**Compute Due Dates fields
PERFORM GET_AGING_BUCKETS .
RF035-SFAE1 = SKNKK-SFAE1.
RF035-SFAE2 = SKNKK-SFAE2.
RF035-SFAE3 = SKNKK-SFAE3.
RF035-SFAE4 = SKNKK-SFAE4 .
RF035-SFAE5 = SKNKK-SFAE5.
ENDLOOP.
ENDFORM. " GET_BALANCE_SFIELDS
*& Form GET_AGING_BUCKETS
text
--> p1 text
<-- p2 text
FORM GET_AGING_BUCKETS .
DATA: BEGIN OF LT_BUKRS OCCURS 0,
BUKRS LIKE T001-BUKRS,
END OF LT_BUKRS.
DATA: BEGIN OF LT_BUKTAB OCCURS 0,
BUKRS LIKE T001-BUKRS,
WAERS LIKE T001-WAERS,
KKBER LIKE T014-KKBER,
END OF LT_BUKTAB.
DATA: LD_LINES LIKE SY-TABIX.
*...performance optimization: for more than one company codes check....*
*...if balances exist and avoid selection of open items, if they don't.*
*...exist..............................................................*
REFRESH LT_BUKRS.
REFRESH LT_BUKTAB.
DESCRIBE TABLE BUKTAB LINES LD_LINES.
IF LD_LINES GT 1.
SELECT DISTINCT BUKRS APPENDING CORRESPONDING FIELDS
OF TABLE LT_BUKRS
FROM KNC1 FOR ALL ENTRIES IN BUKTAB
WHERE BUKRS = BUKTAB-BUKRS AND
KUNNR = Sknkk-KUNNR.
SELECT DISTINCT BUKRS APPENDING CORRESPONDING FIELDS
OF TABLE LT_BUKRS
FROM KNC3 FOR ALL ENTRIES IN BUKTAB
WHERE BUKRS = BUKTAB-BUKRS AND
KUNNR = Sknkk-KUNNR.
SORT LT_BUKRS.
DELETE ADJACENT DUPLICATES FROM LT_BUKRS.
LOOP AT LT_BUKRS.
LOOP AT BUKTAB WHERE BUKRS = LT_BUKRS-BUKRS.
MOVE-CORRESPONDING BUKTAB TO LT_BUKTAB.
APPEND LT_BUKTAB.
ENDLOOP.
ENDLOOP.
ELSE.
READ TABLE BUKTAB INDEX 1.
MOVE-CORRESPONDING BUKTAB TO LT_BUKTAB.
APPEND LT_BUKTAB.
ENDIF.
*...process company codes for customer given by interface..........*
LOOP AT LT_BUKTAB WHERE KKBER = s_cinfo-KKBER.
CALL FUNCTION 'CUSTOMER_DUE_DATE_ANALYSIS'
EXPORTING BUKRS = LT_BUKTAB-BUKRS
KKBER = ' '
KKBER = s_cinfo-KKBER
KUNNR = Sknkk-KUNNR
RASID = RASID
IMPORTING SFAE1 = RF035-SFAE1
SFAE2 = RF035-SFAE2
SFAE3 = RF035-SFAE3
SFAE4 = RF035-SFAE4
SFAE5 = RF035-SFAE5
SFAEL = RF035-SFAEL
EXCEPTIONS NO_OPEN_ITEMS = 4.
IF SY-SUBRC = 0.
*-- RF035 -
SKNKK-SFAE1 = SKNKK-SFAE1 + RF035-SFAE1.
SKNKK-SFAE2 = SKNKK-SFAE2 + RF035-SFAE2.
SKNKK-SFAE3 = SKNKK-SFAE3 + RF035-SFAE3.
SKNKK-SFAE4 = SKNKK-SFAE4 + RF035-SFAE4.
SKNKK-SFAE5 = SKNKK-SFAE5 + RF035-SFAE5.
SKNKK-SFAE5 = SKNKK-SFAE5 + RF035-SFAE5.
SKNKK-SFAEL = SKNKK-SFAEL + RF035-SFAEL.
ENDIF.
ENDLOOP.
ENDFORM. " GET_AGING_BUCKETS
*& Form header
This Subroutine gets data for displaying title *
There are no interface parameters to be passed to this subroutine. *
FORM header .
wa_final-string = text-000. APPEND wa_final TO i_final.
wa_final-string = text-001. APPEND wa_final TO i_final.
wa_final-string = text-002. APPEND wa_final TO i_final.
wa_final-string = text-003. APPEND wa_final TO i_final.
wa_final-string = text-004. APPEND wa_final TO i_final.
wa_final-string = text-005. APPEND wa_final TO i_final.
wa_final-string = text-006. APPEND wa_final TO i_final.
wa_final-string = text-007. APPEND wa_final TO i_final.
wa_final-string = text-008. APPEND wa_final TO i_final.
wa_final-string = text-009. APPEND wa_final TO i_final.
wa_final-string = text-010. APPEND wa_final TO i_final.
wa_final-string = text-011. APPEND wa_final TO i_final.
wa_final-string = text-012. APPEND wa_final TO i_final.
wa_final-string = text-013. APPEND wa_final TO i_final.
wa_final-string = text-014. APPEND wa_final TO i_final.
wa_final-string = text-015. APPEND wa_final TO i_final.
wa_final-string = text-016. APPEND wa_final TO i_final.
wa_final-string = text-017. APPEND wa_final TO i_final.
wa_final-string = text-018. APPEND wa_final TO i_final.
wa_final-string = text-019. APPEND wa_final TO i_final.
wa_final-string = text-020. APPEND wa_final TO i_final.
wa_final-string = text-021. APPEND wa_final TO i_final.
wa_final-string = text-022. APPEND wa_final TO i_final.
wa_final-string = text-023. APPEND wa_final TO i_final.
wa_final-string = text-024. APPEND wa_final TO i_final.
ENDFORM. " header
*& Form DOWNLOADCREDITDATA
text
-->P_P_PATH text
FORM DOWNLOADCREDITDATA USING P_PATH.
DATA:
lw_file2 TYPE string . " File Path
lw_file2 = p_PATH.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE = BIN_FILESIZE
filename = lw_file2
filetype = 'DBF'
APPEND = ' '
write_field_separator = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = 'X'
WRITE_LF = 'X'
COL_SELECT = 'X'
COL_SELECT_MASK = ' '
DAT_MODE = 'X'
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = '0'
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH = FILELENGTH
TABLES
data_tab = I_CINFO
fieldnames = i_final
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
IF sy-subrc <> 0.
Messege
ENDIF. " IF sy-subrc EQ 0
ENDFORM. " DOWNLOADCREDITDATA
*& Form DOWNLOAD_CREDIT_DATA
text
--> p1 text
<-- p2 text
FORM DOWNLOAD_CREDIT_DATA .
PERFORM HEADER.
PERFORM DOWNLOADCREDITDATA USING P_PATH.
ENDFORM. " DOWNLOAD_CREDIT_DATA
*& Form GET_PGRESS_INDICATOR
text
-->P_L_TEXT text
-->P_L_PCT text
FORM GET_PGRESS_INDICATOR USING L_TEXT
L_PCT.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = l_pct
TEXT = l_TEXT.
ENDFORM. " GET_PGRESS_INDICATORIf you are just Downloading to a Flat file then why dont you have logic in place for the program to dump the data read into the file to that point depending on any criteria like accounts or customer then clear the internal table and run it in the back ground.
try to use cursor to read the records from the table which will make it a bit more efficient than plain select stement. -
Workflow install time-out error
hi,
i get a time-out error during wf configuration assistant. i believe that is has something to do with a database/workflow language conflict. the ca aborts just after setting and resetting env var 4(?) nls_lang/wf_nls_lang. any thoughts?
thanks,
kpYour question is overly terse. As this ain't Twitter, maybe you can use a few more characters to describe what you are asking for?
Timeouts can occur in a couple of situations:
1) On connections. By default, most client APIs give up if the connection has not completed within 15 seconds. This value is usually adjustable.
2) When running commands. Many client APIs has a default timeout of 30 seconds, meaning that if SQL Server has not returned any data in this time frame, they give up and tell SQL Server to stop executing. If you experience this, you need to determine whether
the timeout is the problem or the fact that it takes 30 seconds is the problem. The timeout is adjustable on the Command object. The default is a hole in the head in my opinion.
3) Lock timeouts. This is a timeout that occurs inside SQL Server (in opposition to the other two) when a process has been waiting for a lock long enough. The default here is -1 which means "wait forever". But you can use the command SET LOCK_TIMEOUT
to set an explicit lock timeout.
4) When talking to linked servers. These timeouts are really the same as the first two, but they occur inside SQL Server, as here SQL Server is the client with regards to the remote data source. The default for queries is 10 minutes, a little more generous
than the default in the client API.
Erland Sommarskog, SQL Server MVP, [email protected] -
Select count(*) cause time out error
I invoke the following statement:
select count(*) as total from table1
where table1 is large(30000 rows), total size of the database is more than 20GB.
The above statement will cause time out error. How to solve the problem?Hallo chcw,
a timeout in a table with 30.000 records is very unusual (for a simple SELECT COUNT). From my point of view Dan is on the right way and you will have a typical blocking scenario.
1. if you have LOBs they won't be part of a SELECT COUNT (either its a heap of a clustered index)
2. Microosft SQL Server will ALWAYS use the smallest index for such a simple SELECT
3. if it is a heap you will run into a blocking scenario if someone is updating records and transaction has not committed.
4. Check the isolation level of the transactions - but I expect the standard which is "read committed".
Just a demonstration of "SELECT COUNT" will work whether it is a clustered index or a heap. The next script will create a heap with a LOB and additional attributes:
CREATE TABLE dbo.foo
Id INT NOT NULL IDENTITY(1,1),
n1 INT NOT NULL,
n2 SMALLINT NULL,
c1 CHAR(250) NOT NULL,
c2 CHAR(250) NULL,
c3 VARCHAR(MAX) NOT NULL DEFAULT (REPLICATE('A', 15000))
GO
Now we enter 30,000 records into the table
SET NOCOUNT ON;
DECLARE @i INT = 1;
WHILE @i <= 30000
BEGIN
INSERT INTO dbo.foo (n1, c1) VALUES (@i, 'Just a filler');
SET @i += 1;
END
GO
Keep in mind that we have a HEAP and NO indexes! To check the IO i use the following command befor any of the following examples:
SET STATISTICS IO ON;
GO
Let's start with a first try and you will check as a result the produced IO depending on the affected table partitions:
-- USE SELECT in a HEAP
SELECT COUNT(*) FROM dbo.foo;
GO
Output:
Table 'foo'. Scan count 1, logical reads 2508, ..., lob logical reads 0,
As you can see from the result the LOB-data won't be attached only the "in-row-data" are affected (which are stored in 2508 pages. The reason is a quite simple one: Microsoft SQL Server uses different allocation units for in-row-data and LOB
SELECT p.object_id, p.index_id, p.rows, au.total_pages
FROM sys.partitions AS P INNER JOIN sys.allocation_units AS AU
ON(p.partition_id = au.container_id)
WHERE object_id = OBJECT_ID('dbo.foo');
Now I create a simple index on the column n1 which is an INT-datatype
SELECT p.object_id, p.index_id, p.rows, au.total_pages
FROM sys.partitions AS P INNER JOIN sys.allocation_units AS AU
ON(p.partition_id = au.container_id)
WHERE object_id = OBJECT_ID('dbo.foo');
and run the SELECT COUNT again with the following IO-output:
Table 'foo'. Scan count 1, logical reads 69, ...
WOW - only 69 pages have to be read. The explanation is a quite simple one - now we have an index which is quite small. Microsoft SQL Server WILL use the smallest index of a table to scan the number of records. Let's try it again with n2 which is a smallint
(2 bytes)
CREATE NONCLUSTERED INDEX ix_foo_n2 ON dbo.foo (n2);
GO
The IO will be 62 (or less) because MORE index records a fitting to one data page!
Conclusion is that either you have small record size or long record size - The query optimizer will always use the smallest index for the execution (that's maybe why Visahk has asked for the execution plan).
I don't believe it is because of the "huge amount of data" but - as Dan has pointed out - it HAS TO BE a blocking scenario which can have multiple reasons. For demonstration of a blocking scenario open SSMS and start in the query windows with the following
command(s):
BEGIN TRANSACTION
UPDATE dbo.foo
SET c1 = 'This is my name'
WHERE Id = 10000;
-- What locks do we have now in the database
SELECT resource_description,
resource_associated_entity_id,
request_mode,
request_type
FROM sys.dm_tran_locks AS DTL
WHERE resource_database_id = DB_ID() AND
resource_type != 'DATABASE';
Your result should look like that (with differences in the entity_id and resource descriptions :)
The above pic demonstrates the "locking chain". As you can see the slot 7 on PAGE 82400 has an exclusive lock. This means that NO OTHER request can currently obtain another lock to it!
Now open a second query window and run a SELECT COUNT... - it will not finish!
The reason is that the second requests has to wait for the release of the locked resources by the first transaction! Leave the statement and change back to the first transaction and finish the transaction by cancellation of the query. In the moment the locks
have been released the second query will finish immediate.
So - from my point of view - Dan has given the correct answer. Against wide spreaded statements a heap won't block the whole table exclusivly but - as in a cluster, too - only the row itself (see the 7 which is the slot where the record exists).
MCM - SQL Server 2008
MCSE - SQL Server 2012
db Berater GmbH
SQL Server Blog (german only) -
Lock time out; try later.: Why it occurs
Hi ,
I m trying Insert_update_delete tutorial with my tables
when i create Page2.jsp with Update buttons on Page1.jsp when i deploy it it gives me followin exception .
No errors are there in bean files how do i Trace it?
CAN ANYBODY HELP COMING OUT OF THIS????
Description: An unhandled exception occurred during the execution of the web application. Please review the following stack trace for more information regarding the error.
Exception Details: javax.faces.el.EvaluationException
javax.faces.FacesException: javax.faces.FacesException: Can't instantiate class: 'signon.Page1'.. class signon.Page1 : javax.faces.FacesException: java.sql.SQLException: Lock time out; try later.
Possible Source of Error:
Class Name: com.sun.faces.el.ValueBindingImpl
File Name: ValueBindingImpl.java
Method Name: getValue
Line Number: 206
Source not available. Information regarding the location of the exception can be identified using the exception stack trace below.
Regards !!!!!!
PriyaHi Priya,
There are a few reasons this kind of error can occur - typically it's because a rowset didn't get closed for some reason. If you're using pointbase, this can happen pretty easily because the number of connections that are supported is very low etc. Check your server.log file to see if there is any additional information - the error stack presented in the browser sometimes doesn't hold all the information. It's difficult to diagnose with just the information you have provided here. I can't tell if it's a table that's locked or the entire db.
If this problem is occuring in Pointbase during your development, the way to clean it up is to restart pointbase and the appserver.
A few scenarios where this problem can occur (yours might be the first one):
1) could be an issue w/inserts... we are thinking we might want to revise the tutorial here... instead of :
rowset.execute();
rowset.moveToInsertRow();
rowset.updateObject("FOO", new Integer(0));
rowset.updateObject("ID", getNextId());try instead constructing the insert manually, something like:
Context ctx = new InitialContext();
DataSource ds = (DataSource)ctx.lookup(blahblahrowset.getDataSourceName());
Connection c = ds.getConnection();
c.setAutoCommit(false);
Statement stmt = c.createStatement();
int count = stmt.executeUpdate("INSERT INTO person (PersonID, Name, JobTitle) VALUES ((SELECT (MAX(PersonID)+1) from Person), 'The New Guy', 'new guy title')");
// you can verify count is 1 here, but really its not necessary as a SQLException will be thrown if something went wrong - just make sure you close in the exception handler as well
stmt.close();
c.commit();
c.close(); Also note that "getNextPK" approach in the tutorial is just a quick and dirty approach - you should probably use identity columns or perhaps the MAX approach shown in the code above... if you do use an identity column, you would remove the id column from the insert statement and let the db handle it.
2) An exception is thrown in your application and therefore it is skipping the afterRenderResponse method which contains the close statement
Solution: Avoid throwing exceptions - and if you must throw an exception, make sure to close the rowset before throwing.
3) If you put a rowset in the session or application bean, you might be holding a lock on the table somewhere
Solution: Avoid putting rowsets in Session and application beans - if you must access the database in those beans, close the rowsets as soon as possible - ideally don't just leave them open. If you must hold them open for extended periods of time. be aware that your pages may not be able to access those tables via direct binding. -
Hi
when I tried to add Roles to a phase, workpackage, activity or task of a custom Road map in 'RMAUTH' transaction its taking lot of time and finally I see a time out error. Did any one encountered this issue. Please suggest
Regards,
BhanuYour question is overly terse. As this ain't Twitter, maybe you can use a few more characters to describe what you are asking for?
Timeouts can occur in a couple of situations:
1) On connections. By default, most client APIs give up if the connection has not completed within 15 seconds. This value is usually adjustable.
2) When running commands. Many client APIs has a default timeout of 30 seconds, meaning that if SQL Server has not returned any data in this time frame, they give up and tell SQL Server to stop executing. If you experience this, you need to determine whether
the timeout is the problem or the fact that it takes 30 seconds is the problem. The timeout is adjustable on the Command object. The default is a hole in the head in my opinion.
3) Lock timeouts. This is a timeout that occurs inside SQL Server (in opposition to the other two) when a process has been waiting for a lock long enough. The default here is -1 which means "wait forever". But you can use the command SET LOCK_TIMEOUT
to set an explicit lock timeout.
4) When talking to linked servers. These timeouts are really the same as the first two, but they occur inside SQL Server, as here SQL Server is the client with regards to the remote data source. The default for queries is 10 minutes, a little more generous
than the default in the client API.
Erland Sommarskog, SQL Server MVP, [email protected] -
Getting time out error when running the assigned verification in DRM 9.3.2.
Hi,
I have installed DRM 9.3.2.0.0 in my system (windows 7), when i am trying to run assigned verifications i am getting the time out error within a minute.
As suggested by oracle,I have added DWORD with value 480000 under Master Data Management in Registry editor. But still getting the error.
Please suggest a solution for this issue.
regards,
sathiyaPlease suggest me the solution.
regards,
sathiya -
Performance issue in Report (getting time out error)
Hi experts,
I am doing Performance for a Report (getting time out error)
Please see the code below and .
while looping internal table IVBAP after 25 minutes its showing time out error at this poit ->
SELECT MAX( ERDAT ) .
please send alternate code for this .
Advance thanks
from
Nagendra
Get Sales Order Details
CLEAR IVBAP.
REFRESH IVBAP.
SELECT VBELN POSNR MATNR NETWR KWMENG WERKS FROM VBAP
INTO CORRESPONDING FIELDS OF TABLE IVBAP
FOR ALL ENTRIES IN IVBAK
WHERE VBELN = IVBAK-VBELN
AND MATNR IN Z_MATNR
AND WERKS IN Z_WERKS
AND ABGRU = ' '.
Check for Obsolete Materials - Get Product Hierarhy/Mat'l Description
SORT IVBAP BY MATNR WERKS.
CLEAR: WK_MATNR, WK_WERKS, WK_PRDHA, WK_MAKTX,
WK_BLOCK, WK_MMSTA, WK_MSTAE.
LOOP AT IVBAP.
CLEAR WK_INVDATE. "I6677.sn
SELECT MAX( ERDAT ) FROM VBRP INTO WK_INVDATE WHERE
AUBEL EQ IVBAP-VBELN AND
AUPOS EQ IVBAP-POSNR.
IF SY-SUBRC = 0.
MOVE WK_INVDATE TO IVBAP-INVDT.
MODIFY IVBAP.
ENDIF. "I6677.e n
SELECT SINGLE * FROM MBEW WHERE "I6759.sn
MATNR EQ IVBAP-MATNR AND
BWKEY EQ IVBAP-WERKS AND
BWTAR EQ SPACE.
IF SY-SUBRC = 0.
MOVE MBEW-STPRS TO IVBAP-STPRS.
IVBAP-TOT = MBEW-STPRS * IVBAP-KWMENG.
MODIFY IVBAP.
ENDIF. "I6759.en
IF IVBAP-MATNR NE WK_MATNR OR IVBAP-WERKS NE WK_WERKS.
CLEAR: WK_BLOCK, WK_MMSTA, WK_MSTAE, WK_PRDHA, WK_MAKTX.
MOVE IVBAP-MATNR TO WK_MATNR.
MOVE IVBAP-WERKS TO WK_WERKS.
SELECT SINGLE MMSTA FROM MARC INTO MARC-MMSTA
WHERE MATNR = WK_MATNR
AND WERKS = WK_WERKS.
IF NOT MARC-MMSTA IS INITIAL.
MOVE '*' TO WK_MMSTA.
ENDIF.
SELECT SINGLE LVORM PRDHA MSTAE MSTAV FROM MARA
INTO (MARA-LVORM, MARA-PRDHA, MARA-MSTAE, MARA-MSTAV)
WHERE MATNR = WK_MATNR.
IF ( NOT MARA-MSTAE IS INITIAL ) OR
( NOT MARA-MSTAV IS INITIAL ) OR
( NOT MARA-LVORM IS INITIAL ).
MOVE '*' TO WK_MSTAE.
ENDIF.
MOVE MARA-PRDHA TO WK_PRDHA.
SELECT SINGLE MAKTX FROM MAKT INTO WK_MAKTX
WHERE MATNR = WK_MATNR
AND SPRAS = SY-LANGU.
ENDIF.
IF Z_BLOCK EQ 'B'.
IF WK_MMSTA EQ ' ' AND WK_MSTAE EQ ' '.
DELETE IVBAP.
CONTINUE.
ENDIF.
ELSEIF Z_BLOCK EQ 'U'.
IF WK_MMSTA EQ '' OR WK_MSTAE EQ ''.
DELETE IVBAP.
CONTINUE.
ENDIF.
ELSE.
IF WK_MMSTA EQ '' OR WK_MSTAE EQ ''.
MOVE '*' TO WK_BLOCK.
ENDIF.
ENDIF.
IF WK_PRDHA IN Z_PRDHA. "I4792
MOVE WK_BLOCK TO IVBAP-BLOCK.
MOVE WK_PRDHA TO IVBAP-PRDHA.
MOVE WK_MAKTX TO IVBAP-MAKTX.
MODIFY IVBAP.
ELSE. "I4792
DELETE IVBAP. "I4792
ENDIF. "I4792
IF NOT Z_ALNUM[] IS INITIAL. "I9076
SELECT SINGLE * FROM MAEX "I9076
WHERE MATNR = IVBAP-MATNR "I9076
AND ALNUM IN Z_ALNUM. "I9076
IF SY-SUBRC <> 0. "I9076
DELETE IVBAP. "I9076
ENDIF. "I9076
ENDIF. "I9076
ENDLOOP.Hi Nagendra!
Get Sales Order Details
CLEAR IVBAP.
REFRESH IVBAP.
check ivbak is not initial
SELECT VBELN POSNR MATNR NETWR KWMENG WERKS FROM VBAP
INTO CORRESPONDING FIELDS OF TABLE IVBAP
FOR ALL ENTRIES IN IVBAK
WHERE VBELN = IVBAK-VBELN
AND MATNR IN Z_MATNR
AND WERKS IN Z_WERKS
AND ABGRU = ' '.
Check for Obsolete Materials - Get Product Hierarhy/Mat'l Description
SORT IVBAP BY MATNR WERKS.
CLEAR: WK_MATNR, WK_WERKS, WK_PRDHA, WK_MAKTX,
WK_BLOCK, WK_MMSTA, WK_MSTAE.
avoid select widin loop. instead do selection outside loop.u can use read statement......and then loop if required.
LOOP AT IVBAP.
CLEAR WK_INVDATE. "I6677.sn
SELECT MAX( ERDAT ) FROM VBRP INTO WK_INVDATE WHERE
AUBEL EQ IVBAP-VBELN AND
AUPOS EQ IVBAP-POSNR.
IF SY-SUBRC = 0.
MOVE WK_INVDATE TO IVBAP-INVDT.
MODIFY IVBAP.
ENDIF. "I6677.e n
SELECT SINGLE * FROM MBEW WHERE "I6759.sn
MATNR EQ IVBAP-MATNR AND
BWKEY EQ IVBAP-WERKS AND
BWTAR EQ SPACE.
IF SY-SUBRC = 0.
MOVE MBEW-STPRS TO IVBAP-STPRS.
IVBAP-TOT = MBEW-STPRS * IVBAP-KWMENG.
MODIFY IVBAP.
ENDIF. "I6759.en
IF IVBAP-MATNR NE WK_MATNR OR IVBAP-WERKS NE WK_WERKS.
CLEAR: WK_BLOCK, WK_MMSTA, WK_MSTAE, WK_PRDHA, WK_MAKTX.
MOVE IVBAP-MATNR TO WK_MATNR.
MOVE IVBAP-WERKS TO WK_WERKS.
SELECT SINGLE MMSTA FROM MARC INTO MARC-MMSTA
WHERE MATNR = WK_MATNR
AND WERKS = WK_WERKS.
IF NOT MARC-MMSTA IS INITIAL.
MOVE '*' TO WK_MMSTA.
ENDIF.
SELECT SINGLE LVORM PRDHA MSTAE MSTAV FROM MARA
INTO (MARA-LVORM, MARA-PRDHA, MARA-MSTAE, MARA-MSTAV)
WHERE MATNR = WK_MATNR.
IF ( NOT MARA-MSTAE IS INITIAL ) OR
( NOT MARA-MSTAV IS INITIAL ) OR
( NOT MARA-LVORM IS INITIAL ).
MOVE '*' TO WK_MSTAE.
ENDIF.
MOVE MARA-PRDHA TO WK_PRDHA.
SELECT SINGLE MAKTX FROM MAKT INTO WK_MAKTX
WHERE MATNR = WK_MATNR
AND SPRAS = SY-LANGU.
ENDIF.
IF Z_BLOCK EQ 'B'.
IF WK_MMSTA EQ ' ' AND WK_MSTAE EQ ' '.
DELETE IVBAP.
CONTINUE.
ENDIF.
ELSEIF Z_BLOCK EQ 'U'.
IF WK_MMSTA EQ '' OR WK_MSTAE EQ ''.
DELETE IVBAP.
CONTINUE.
ENDIF.
ELSE.
IF WK_MMSTA EQ '' OR WK_MSTAE EQ ''.
MOVE '*' TO WK_BLOCK.
ENDIF.
ENDIF.
IF WK_PRDHA IN Z_PRDHA. "I4792
MOVE WK_BLOCK TO IVBAP-BLOCK.
MOVE WK_PRDHA TO IVBAP-PRDHA.
MOVE WK_MAKTX TO IVBAP-MAKTX.
MODIFY IVBAP.
ELSE. "I4792
DELETE IVBAP. "I4792
ENDIF. "I4792
IF NOT Z_ALNUM[] IS INITIAL. "I9076
SELECT SINGLE * FROM MAEX "I9076
WHERE MATNR = IVBAP-MATNR "I9076
AND ALNUM IN Z_ALNUM. "I9076
IF SY-SUBRC 0. "I9076
DELETE IVBAP. "I9076
ENDIF. "I9076
ENDIF. "I9076
endloop.
U have used many select queries widin loop-endloop which is a big hindrance as far as performance is concerned.Avoid such practice.
Thanks
Deepika -
Hi,
We are trying to invoke a Web Service from BPEL Process (10.1.3.3.0) and we received below time out error message in em console.
</part></Invoke_1_setJobPostingXML_InputVariable></input><fault><remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Read timed out</summary>
Problem here is this error is not coming for all the invocation. For ex. We have posted the input payload at 3:15:34PM today and it thrown an error at 3:45:12 PM with above message. Also its not huge load hitting their server as we are calling the webservice once in 4-5 mins and if we repost the same message, its posting without any issue. This time out error comes 4-5 times daily and want to understand why it occurs everyday.
1. Will BPEL receive an error if we post huge payload to web service?
2. Do we need to set some waiting time to receive the response after posting the data to Web service?
3. Other possible scneario's for timeout error?
Thanks,
SaravanaHi Saravana,
It's likely to be a problem at the remote side or a network latency/communication problem...
How can you affirm "its not huge load hitting their server"? Your service may not be the only source of load...
Cheers,
Vlad -
Dear All,
One of our production system and one of HR user got time out error while executing T-code PA30 , PA40 .
Note : we tried the transaction ( PA30 and PA40 ) in our user id ,it work smooth ,there is no issue with in my user id as well other HR user also .
Only the specific user facing time out error in Production server.
Note : while executing PA30 ,PA40 t-codes ,it takes long time to get initial screen itself finally got time out error (No issue with other SAP HR users) .
Pls check the below logs:
Runtime Error TIME_OUT
Occurred on 17.08.2011 at 08:59:00
Time limit exceeded.
What happened?
The program "SAPLRHAC" has exceeded the maximum permitted runtime without
interruption, and has therefore been terminated.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
After a certain length of time, the program is terminated. In the case
of a work area, this means that
- endless loops (DO, WHILE, ...),
- database accesses producing an excessively large result set,
Kindly advise ,is this related to any Authorization issue ???Hi,
Please share SAP_BASIS/ SAP_HR release/patch level information of the affected SAP system.
I would suggest you to create New Temp SAP User id with exact copy of that affected SAP User ID and then try to access PA30/PA40 with that New SAP User id login into affected system. Check that, u are facing the same behavior/issue with that New Temp SAP User id ?
Regards,
Bhavik G. Shroff -
Time out error on deploying to SAP-J2EE engine.
I got a problem while deploying to SAP-J2EE engine using ant. It takes a lot of time and then throws a time out error.
The problem is with the web.xml file pointing to a DTD in the internet, I have pasted some part of the web.xml below,
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN"
"http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
<web-app>
<display-name>MyPay</display-name>
<description>MyPay</description>
Once I write down the DTD description in the web.xml itself, it works fine.
I have pasted the error trace below,
j2eedeploy:
[echo] Deploying to Local environment...
[echo] C:\Java\Projects/MyPay/dist/MyPay.ear
BUILD FAILED
C:\Java\Projects\MyPay\build.xml:445: java.lang.RuntimeException: ERROR: ID90507: Error occured during getting EARDescriptor : Failed to load resource from the context classloader of the current thread! Loading from classloader was caused by: java.net.ConnectException: Connection timed out: connect
Exception is :
java.io.IOException: Failed to load resource from the context classloader of the current thread! Loading from classloader was caused by: java.net.ConnectException: Connection timed out: connect
at com.sap.engine.lib.xml.parser.URLLoaderBase.resolveEntity(URLLoaderBase.java:148)
at com.sap.engine.lib.xml.parser.XMLParser.scanDTD(XMLParser.java:1271)
at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2795)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2830)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:229)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:160)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:261)
at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:280)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:342)
at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:101)
at com.sap.engine.lib.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:127)
at com.inqmy.lib.xml.StandardDOMParser.parse(StandardDOMParser.java:127)
at com.inqmy.lib.xml.StandardDOMParser.parse(StandardDOMParser.java:120)
at com.inqmy.services.servlets_jsp.descriptor.jar.WebWar.getWebDescriptor(WebWar.java:98)
at com.inqmy.deploy.tool.deployer.ExtendedEarReader.loadDescriptorFromFile(ExtendedEarReader.java:175)
at com.inqmy.deploy.tool.deployer.ExtendedEarReader.getFullEarDescriptor(ExtendedEarReader.java:104)
at com.inqmy.deploy.manager.DeployManagerImpl.setEar(DeployManagerImpl.java:355)
at com.inqmy.deploy.manager.DeployManagerImpl.setEar(DeployManagerImpl.java:325)
at com.pg.sap.deploy620.SAPDeploy620Manager.process(SAPDeploy620Manager.java:84)
at com.pg.ant.tasks.j2ee620.J2ee620EngineDeployTask.execute(J2ee620EngineDeployTask.java:40)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
at org.eclipse.ant.internal.ui.antsupport.EclipseDefaultExecutor.executeTargets(EclipseDefaultExecutor.java:32)
at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.run(InternalAntRunner.java:423)
at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.main(InternalAntRunner.java:137)Thanks for your reply Kalyan,
The problem seems to be with my system, because I had run the same ant script in another system and it deployed successfully.
The problem does not seem to be with the dtd, whereas it seems that the SAP-J2EE engine is not able to open the link to the dtd giving a time out error.
Is it possible to switch off the validation process of the SAP-J2EE engine of an xml with the dtd? -
WIH 00013 time out error while viewing a BO Web intelligence report
Hi,
I have a BO web intelligence report. While viewing the report i get WIH 00013 time out error. I have another report with everything same as this one except for one filter condition. That is working fine but former is giving me an error.
I tried changing the timeout values to 120 minutes from 90 minutes in connection server setting but didn't work.
Also when i run the same report by scheduling it in CMC and format as PDF, then it works fine. This error only comes when i try to view the report directly from infoview.
Please let me know if there is any other way to resolve.
Thanks!
Edited by: Satya Suma on Mar 9, 2011 1:31 PM
Edited by: Satya Suma on Mar 9, 2011 2:00 PMHi Suma,
These links may be helpful to you:
WIH00013 - Invalid Session
WIH 00013: Invalid session
All the Best,
Madhu.... -
Time out error while running the FR report on Workspace
Hi,
We are working on Hyperion system 9.3.1 financial reporting with Essbase as a data source.
We have built a report, which has many computation, conditional formatting, suppression condtion.Report has around 100 columns.
Now when we are try to open this report on workspace, report is throwing the "Server time out" error meassage. error meassage is-
"The requested item could not be loaded by thr proxy. Timed out".
Reports are opening fine with less data or if essbase cube doesn't have any data.
Please suggest us on this issue. Do we need to set any setting at Essbase level or workspace level or any other way.
Any help will be appriciated.
Thanks & Regards,
Mohit JainI would suggest by saying that 100 columns seems quite a lot, you mention there are many computation columns, these should be pushed back onto the server to calculate.
We have also experienced issues where reports we pulling back lots of columns that were dynamically calculated.
To narrow down the actual problem you can try the following, the see if the report runs with the change, if not continue with the next steps:
- remove all formatting from the spreadsheet;
- remove all calculations from the spreadsheet;
- see if the report can be built more efficiently, by moving items to Grid POV or using same as, or reordering dimensions in inverse outline order;
If it still doesn't run, then try removing columns until it can run.
Cheers, Iain -
HTTP time out Error in BPM.....
Hi
Error Description:
We have created a Sync-Async Bridge BPM scenario in XI.
In the BPM scenario we are calling the web service, and if the response from the web service is an error message then we have retry in a loop up to 24 times after wait for every 1 min.
We are sending the data to the web service using a proxy created in the R/3 system.
We are getting the time out error in the R/3 system.
We have changed the following parameters in XI.
In SXMB_ADM of XI we have set the value for the following parameter.
Category parameter current value
SA_COMM CHECK_FOR_ASYNC_RESPONSE_TIMEOUT 120
In SXMB_ADM of R/3 we have set the value for the following parameter.
Category parameter current value
RUNTIME HTTP_TIMEOUT 120
When we put the value as 120 for the above parameters and we try for 2 times in the BPM process, then it is sending the response back to the R/3 system after completing the whole BPM process.
But when we increase the no of retries in the BPM process then it is not sending the response back to the R/3 system in the same way, at that time we are getting the error in SXMB_MONI of R/3 system as given below.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!--
Inbound Message
-->
- <SAP:ErrorHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
<SAP:Context />
<SAP:Code p1="500" p2="Timeout" p3="" p4="">HTTP.HTTP_STATUS_CODE_NEQ_OK</SAP:Code>
<SAP:Text language="EN">HTTP status code 500 : Timeout</SAP:Text>
</SAP:ErrorHeader>
Please provide the solution for the same.
Many Thanks
Rinku GangwaniHi Prateek,
Thanks for your replay. I am able to open the URL from XI/PI.
I tried by testing the same URL by using XI 3.0, its working fine and i am getting required data, but in PI 7.1 i am getting an error.
Error is:
In MONI:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.net.ConnectException: Connection refused: connect
In RWB:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.net.ConnectException: Connection timed out: connect
What could be the reason?
Regards,
Venu -
Getting Time-Out Error in Sync-Async Bridge
Hi All,
My IP has a Sync-Async Bridge. I have a fork, two senders, two switchs and a transformation step inside the bridge.
If XI takes much time to process the IP, the send step that closes sync-async bridge is not waiting for the message after a particular period and throws time out error to the sender.
Is it possible to increase the waiting time for sync-async bridge?
This IP works correctly 8 out of 10 times. Sometimes the message is sitting permenantly in the queue(smq2) and gives me system failure error.
Can u tell me why this problem happening?
Thanks & Regards,
Senthil.Dear Michal/Senthil,
Can you pl clear a confusion that i have had for ages...
suppose there is a sync/async bridge ( i understand that it is used for sync business system too async BS communcation )
where we have 4 steps
sync receive - > async send -> async receive -> sync send..
i do understand that async send and async receive are combined through correlation
but i do not understand how do they work..
i mean when async send say send a file to a target system...does async receive reads a file from the same folder based on the corelation or wat...
basically can you pls explain me how do the steps 2 and 3 above work
Edited by: Tarang Shah on Mar 3, 2009 12:51 PM
Maybe you are looking for
-
How to change the privacy statement link url
I looked into the previous threads , could not find the answer to "Changing the privacy statement url to clients privacy statement url". I am talking about the privacy statement URL in the page that user see it as soon as user logs into the e-busines
-
hi How do I put colour in a black and white picture?
-
Hi there I have an E51 and am not sure what has happened but one minute all my contacts were visible and now they are not. If a person whose details I have stored in my phone memory calls me I can see their details however I cannot retrieve contact i
-
SFTP and rsync crashing, and taking down the whole system with them
Hi everyone, Never before I had to resort to the forums, but now I've got a problem I can't seem to solve, no matter how hard I try. Maybe someone on the forums can help me? Both rsync and sftp (fish:// in konqueror) freeze my server, when I transfer
-
Save image as .jpg in the photoshop CC
I was using Photoshop CS6 so I instaled Photoshop CC. Now I need to save my images as .jpg in the photoshop but I don't know how to do it. May someone help me, please?