Lock Tranport Request

hi Gurus,
i want to lock some of the Requests which have been already released from dev and are adjusted in Import queue of qas. I dont want to delete them bcoz may be in future consultants can ask for those to be imported..
off course i m not miser in givin points..
thanks
zeeshan

Hi Zeeshan,
There is as such no method for locking a transport request to avoid the transport. You can leave it in the queue and transport it as and when required. If the Transport Request are sensitive and you want to secure it from not getting transported. You can follow a round about. You can simply delete the request from the queue, as it will not be in the Queue, there is no chance of a accidental transport. When you need this to be transported, you can add the request manually and go ahead with the transport.
Hope this will help.
Regards,
Sanujit

Similar Messages

  • How to create a New Tranport Request for changed  Extract structure

    How to create a New Tranport Request for changed  Extract structure ?
    Hi Experts,
    I have a FI AP Generic Datasource containing extract structure with appended fields.
    It has already been activated and transported to Testing System.
    Now, I am to create a new transport request for this DataSource and Extract structure.
    I do not want to delete and recreate the Generic Datasource.
    I am trying to look at the options in the extract structure top menu from where I can create a new Tranport Request.
    Please let me know the steps
    URGENT

    Hi Dev,
    Once you send the transport request for any data source from Dev to Testing you wont find that again in your Dev (I mean the TR). So, when you change anything for this data source or view now in Dev and try to save it, it will ask for a new transport request and here you can mention a new one starting from View then activate it and go to RSO2 regenerate it and use the same transport request for this too. When you transport this TR to Testing Environment the data source will automatically get changed.
    Hope it helps...

  • Saving Infoset to tranport Request

    Hi all,
    I have added a table in the infoset and generated the same but there is no transport request pop up appeared before the generation or on saving it.
    My problem is that i want to save the changes made in the infoset into transport request and i am not able to do the same.
    Gurus guide me to the procedure of saving the infoset to the transport request.
    Thanks in advance.
    Anuj.
    Edited by: Anuj Anuj112 on Jun 24, 2009 6:22 PM

    Hi ,
    Please find below the steps for transporting your infoset.
    1) Select the infoset to be transported in SQ02 and click Environment->Transports.
    2) Selct the Export option
    3) Remove the test run check box and select overwriting allowed
    4)Select the transport infoset and queries option .
       Import option would be replace
       Here yuo have to specify your infoset name in both lower and upper limit .
       the same applies for queries .
    Execute it , this would create the transport request .copy this tranport request release it and go to transport management in SQ02 in the client where the changes need to be imported .
    Here select the import option and overwriting allowed and select Transport infoset and queries as mentioned above
    in Dataset with import mention the transport request that was created earlier.
    Regards,
    Raghavendra

  • Client ,tranport ,request id,release

    client ,tranport ,request id,release in detail?

    Hi chandra,
                   Client ,tranport ,request id,release in detail?
    Assuming you want to know about Transport connection in detail..
    Transport connection -
    > Grouping(Neccessary objects)(It works fine for me!!)---->Object Types>Eg(Cube)--
    >Assign to a Transport Request(Truck icon).
    *The following Transport sequence * :(Only Neccessary objects)
    a)Info object catalog
    b)Application component
    c)Infocubes & ODS
    d)Transfer rules/Update rules
    e)Infopackages
    f).Multiproviders
    g).Queries/Workbooks
    h)Process chains
    Procedure:
    1. SE09 - To release the Tasks(first) followed by the Request.
    2.Ask your Basis to Import them request to the QA or Prod server.Or if you got authorization for STMS,you can import them request.(make sure u adjust import queue before attempting to import).
    3.Check in the respective Target(QA/PROD) on whether the BW Objects are transported fine.
    I guess this is what u asked for!!!!!!!!!
    cheers
    Arun

  • HT201407 Dear Apple support!  My name is Duy Lam. Recently, one of my best friend just upgrade his phone so he gave me his old iphone  4s, white. The phone was ok, but the problem is when I upgraded it to IOS 7.0.4 it activated lock. it request for the ap

    Dear Apple support!
    My name is Duy Lam. Recently, one of my best friend just upgrade his phone so he gave me his old iphone  4s, white. The phone was ok, but the problem is when I upgraded it to IOS 7.0.4 it activated lock. it request for the apple id ; I had call my friend to ask about that but it's been a long time he couldn't remember the original ID that he had used. so now, could you be able to unlock the phone that i can continues to use this phone. Thank you so much, and I appreciate you all
    <Personal Information Edited by Host>

    All Apple support contact information is on the web site - http://www.apple.com/contact/
    If your friend needs to recover his AppleID used for that iCloud account, then follow the directions here:
    http://support.apple.com/kb/HT5787

  • Download abap object under a tranport request.

    hi experts
                  i have a requirement, a tranport request contain any ABAP Object i don't know how many object actually it contains may be one or more just suppose it will have a report program under a  transport request , in the select-option i will enter transport request number and the path of the directery( whr i have to store the report program). now this report wiil download the report program on this path which i have given in section screen.
    could you please help me where the transport requests are stored in SAP is thr any table pls give me table name or is thr any function module to do this job.
    thanks & regards
    pardeep kumar

    Take a look at the following tables :
    E071
    E071C
    E071E
    E071K
    E071KF
    E071KFINI
    E071S
    They contain the data you are looking for.
    Hope that helps,
    Michael

  • How to create locked Transport Request

    Hi All,
    I have a requirement where I want to create a transport request that cannot be released to any other system i.e, locked transport. I need this transport to create a package to put my works related to a local tool that I want to create in the development server. This is an internal tool and need not be released to any other system. Please help in creating this transport.
    Any help in this will be highly appreciated and rewarded.
    Thanks in advance.
    With Regards,
    Rocky

    Instead of creating some "locked transport request" you can create your developments, that you don't want to be transported, as "local objects" (package / development class: $TMP). You decide about this when the system asks you for the assignment to the development class (package).
    In this case the system will not put these objects to any transport request - they will stay on your development system.
    regards

  • Lock Code request after hard reset

    Hi,
    So I did a hard reset and I knew that I'll lose the Ovi Store. What it's completely new for me is that now each time I'm starting the phone I am requested to input the lock code. I have given 12345 but a message saying "Code fail" is shown and afterwards the phone works normally.
    1. Does anybody know why12345 is not working anymore?
    2. Does anybody know how could I remove this request at startup?
    3. Does anybody know why the phone does react if I am inputting an incorrect code only with a message "Code fail" - I would have expected a lock after multiple inputs but everything is OK.
    4. Does anybody know how can I change this code? - without flashing it at Nokia Service Center (just too far from me). I'm curious if 10000 tries would bring something alhough I am not interested in such a test.

    The default code is 12345 ! Do you have a pin lock on your sim card ? You can also request PUK code from supplier, if no good , you do need Nokia Care Point 
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • Bit locker encryption requests key unless I suspend and resume the encryption

    I am rolling out new computers with Windows 7 Enterprise OS on them.  I am installing bit locker encryption on them.  For some reason with this group of computers, and I recently rolled out a different batch of computers without this problem,
    after encrypting, I must suspend and resume bit locker or upon restart of shutdown and start the user is prompted for the bit locker encryption key.

    Hi,
    Could you please tell some more details about the issue? What do you want to achieve here? To enable bitlocker without the prompt of the startup key? If it is , then please take a check if we have  Require
    additional authentication at startup  policy enabled.
    Besides, could you please have a share for how do you enable bitlocker?
    And here is a guide for bitlocker in Windows 7, just for reference:
    BitLocker Drive Encryption Step-by-Step Guide for Windows 7
    BitLocker Drive Encryption in Windows 7: Frequently Asked Questions
    Hope this may help
    Best regards
    Michael Shao
    TechNet Community Support

  • Best Practice for Tranport request Naming

    Hi,
    We are using SolMan 4.0 during implementation of ECC 6.0.
    We have placed the blueprint and we are in configuration phase.
    We have a IMG project created in the DEV system and was assinged in Solution Manager project under  System Landscape->IMG Projects.
    Now that consultants are going to dev system and customizing they are creating their transport requests.
    Is there any best practice for the naming convention or the transport requests..
    By creating one IMG project for entire implementation is that going to create any problem..!!
    Please sgugest.
    Thanks & Regards
    Mrutyunjay

    As per MSFT best practices(Mentioned by Scott) keep it short as much as possible. You can use SP for SharePoint-SUBSite
    also check this blog for best practices.
    http://www.networkworld.com/community/blog/simple-naming-conventions-improve-end-user-experience-sharepoint-sites
    also one more thing you should consider, never use the reserved words into the SharePoint URLs. you will able to create the site/lis/library/folder but when you browse get the 404 errors.
    check this blog:
    http://www.sharepointblog.cz/2012/04/reserved-words-in-sharepoint-url.html
    http://techtrainingnotes.blogspot.com/2012/03/names-you-cant-use-for-sharepoint.html
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Tranport request missing

    Hi all,
    our dev server crash. after database restore the problem is solved but it is status on when backup is taken
    during backup and crash we upgrade some program with transport request. those request are missing after backup restore
    those request are already released and imported in qas and prd. if we create new request in dev server it is created with old request no.
    how to solve this problem.

    So the transport no. that is being generated in your dev system is older or before the system crashed and you want to change the transport no. to some new transport no. so it does not conflict with the transports that are already imported into QAS and PRD , correct ?
    If I have understood your issue correctly then what you need to do is update table E070L with the new transport number on your dev system.
    Hope this helps.
    Thanks,
    Naveed

  • Problems with tranportation requests in solution buider

    Hi,
    I'm implementing crm2007, and it was everthing going fine, untill now. In solution builder when I went to activate a new building block I had an error message "Transport numbers not fullfill the requirement.".
    I have no ideia of what this could be!!!! I try to create new transport requests, but I had the same error!
    Can anyone give me some guideline to find the problem?
    Thanks

    HI Ragu,
    I created user by settting "En" as default language.But still it is giving same error.
    regards
    srujan
    Message was edited by: srujansingh ramsingh

  • Saving Infoset DELETION to tranport Request

    Anyone know how this is done in SQ02? If you click delete it's gone immediately. I'm guessing I need to go into environment->transports first and get in into a transport request?
    I'm not sure what options to choose though, as there's various radio buttons and executing doesn't prompt for a transport request.
    Thanks

    Transport can be done as follows
    By using the standard program u2018RSAQR3TRu2019
    By using the transport option available on the application bar in Transactions SQ02 or SQ03.
    Hope it helps you.

  • FM for checking Tranport Request.

    Hi gurus,
    Transport Request numbers are stored in Table E070,
    it also stores if Request is Customizing request/Correction Request.
    I want to know if there is any existing FM to get this
    information regarding a TR.
    As it is, i think accessing a Basis table directly from
    ABAP would be the last option.
    Thanks in Advance,
    Rohit.

    Dear,
            Your FM is CTS_API_READ_CHANGE_REQUEST.
    Points?
    Regards,
    VM

  • About Tranport Request Odrer.

    Hi All,
    I need to transport my request to quality and production ,what order i have to follow..
    Here i have following objects:Cube update rule,data source cube,Function modules(User exit variables which is used in Multi Planning area),basic planing area's,Multi planning area,web interface.
    Like what order i have to follow which request i have to send first,second ,third.......
    Can you guide me..
    Thanks,
    Edited by: Eyda rose on Jun 23, 2008 3:42 PM

    Hi All,
    THanks Juergen for your quick reply.
    Here my data source is cube (export data source ).because i am sending the TR cube to Basic cube.For that on i have created separate request.
    Then cube and  update rules having separate request.
    Then Function modules(User exit variables which is used in Multi Planning area)having separate request.
    Basic planing area's having separate request.
    Multi planning area having separate request.
    Web interface (can be all in one) having separate request.
    Can you give a suggestion what order i have to follow.
    Thanks..

Maybe you are looking for

  • How can two users share the same iTunes library in 10.7

    I am running Lion 10.7 and there are two users on the iMac. I would like full read/write access to our share music from either user account. Currently I have the iTunes Media folder in users/shared and on my account it looks like a regular iTunes and

  • Can you upload files from the iPad to a Web Browers

    I recently received an iPad and I love it. I would also love to leave my laptop at home and only use the iPad while I'm away. One thing I think is missing for this to be possible is the lack of a native filesystem, as far as I know. I know there are

  • Airport not working on my mac mini with snow leopard

    hello my airport on my mac mini 80 gb with snow leopard 10.5 is not working so i can not connect to the internet,i had a problem and re-installed snow leopard but i cannot to the internet now,i go to system preferences and network and i have tried to

  • How BBPUPDVD determines vendor master change in ECC?

    Hi Experts, How is the vendor master change in ECC captured and what is the strategy/check that the BBPUPDVD transaction OR vendor update report uses/does in ECC to pick up the updated vendor with qualified fields for transmission? Qualified fields -

  • Payment Method not appearing in Document entry

    Hi I have created one vendor for which payment term & payment method is entered in Vendor mater record (FK01) whereas, when i post the invoice for the same vendor through FB60, i can see the payment terms in document but payment method is not appeari