Lock Ups !!!!!!! "k7t turbo limited edition"

1.3g duron
k7t turbo Lim.Edition
256mb 133mhz sdram
40gig seagate , 10gig samsung
Liteon 16x10x40x / 52x cdrom
7200 Radeon Pci 32mb
REalTek Ethernet
Welp fixed other problem by installing XP with cpu cache off and then turned back on when finished. Everything seemed to work fine all up to the point when I tried to start playing games. First game "quake 3" works fine aslong as im constantly moving intill I have to leave it on untouched for a min or so. Then it locks up or freezes and all I see is a black screen. In  starcraft it will let me play for a good 2 minutes and then the screen freezes. Last game  I tried was black and white that let me play for a good 4 mins then everytime i tried again the time it took to lock up got shorter and shorter. Ive installed new bios and via chipset drivers and still nothing.
Anybody got any other ideas I can try ????????????

well I didnt think I needed to since I was using a PCI card. I guess Ill go ahead and try. As for my power source im going to list everything it says cause i dont know a thing about them.
model: atx-350-12v
max output is 350w
input:        output:
115vac        +12v   15a       max
8a max        +5v    35a       max
60hz      
230vac        +3.3v  20a       max
4a max        -5v    0.5a      max
50 hz         -12v   0.5a      max
hope that helps

Similar Messages

  • PCI 2.1 SLot on K7T Turbo Limited Edition?

    I'm about to get a Firewire Card but I'm not sure whether my MB :   K7T Turbo Limited Edition (MS-6330 v3.X) has a PCI 2.1 slot. I haven't found it in manual either. Can anybody help?
    Thanks
    minurec

    Welcome!
    My Turbo2 manual doesn't specify either, but specs on MSI site for mine shows 32 bit PCI 2.2, usually backward compatible. Your MB is just one very short edition back, and I bet your slots are probably the same and 2.1 compatible. MSI shows yours as 32 bit, but w/o the #version. To my memory the 2.1 standard predates our MBs by a couple of years or more. I think you're safe to go.

  • K7t turbo limited edition drivers (duron 700)

    Can anyone tell me where to get the drivers for the K7T turbo limited edition?  It has the duron 700 installed.  Do I need to find out what chip set? if so, how? then what else do I need to know and where do I go?
    Thank you,
    Troubled

    If this is your board, here is the drivers for it.

  • K7T Turbo Limited Edition W/Raid board

    Can someone tell me if the VIA KT133A Chipset Based K7T Turbo Limited Edition W/ Raid board will take a faster processor beyond 1.6 ghz? if so what is the fastest cpu it will take?

    Athlon xp 1800 thoroughbred works on my k7 turbo r le,
    Thanks to everyone here, I read a gazzilion messages before i was brave enough to start and it paid off.
    Fitted board (£29 from stal.com) fitted duron, downloaded bios 3.6 and installed. set core voltage in bios to 1.55 and multiplier to 11.5x .Fit xp1800 - Boot and then go back into bios to set processor at 1.5v(Note: 1.5v not available until first boot with xp 1800)
    Now going to try the fuzzy logic thingy.
    Good luck.

  • K7T Turbo Limited Edition HD Max

    I currently am running this setup:
    K7T Turbo Limited Edition Motherboard, AMD Athlon XP 1800+ 1.53 Ghz, 384MB PC-133, 27.2 GB WD, 40GB Maxtor, Gigabyte 5900XT, MSI 52x Combo, Linksys 10/100 NIC, Sound Blaster Live Audigy2 Limited Edition
    I have been over and through the website and I noticed that with the new BIOS which (3.6) the Turbo2 (which I don't have) can run up to a 160GB Hard drive.  I was wondering what the max is for the normal turbo.  My WD 27.2 GB drive is going sour and I want to upgrade to a Seagate 200GB HD, since I plan to use it when I upgrade in January.  Any ideas whether it will work without out major headaches?  

    Quote
    Originally posted by osnavi
    As said by Rogue_Wulff, you should select the 120 GB HDD as the 160 Gb. could have same problems as the 200 Gb. ( More than 136 Gb)
    Alright, thanks.  

  • K7T Turbo Limited Edition + Raid

    Im Planning to upgrade to a K7T Turbo Limited Edition + Raid (MS-6330 3.0) with an XP 2000.... are there any issues with the board with this CPU? According to the bios updates theysupport up to XP2600+'s... im not going ddr yet, prices are WAY to high.
    Just need somethin a bit faster than this Duron 900

    LOL
    Ok... check here:
    link
    only one K7T Turbo2 : link
    And here : link
    there have a lot of MS-6330's, don't buy any of them as those are obsolete model. Go for K7T Turbo2.

  • K7T Turbo limited edition can't support Windows XP!!!!

    i'm user of K7T Turbo Limited Edition mainboard, i treid to upgrade my OS to Windows XP currently and i found that the installation aborted abnormaly when it reach windows is restarting phase, and my PC will just hang without giving any response, i'm wondering my mianboard can't support Windows XP. Another prob i face is my hp deskject 630c printer couldn't supported by the mainboard also, i had tested on other PC and it works truly well. Anyone facing similar situation ?? can i solve my prob with update the latest BIOS

    Hi!
    There is no reason why your mobo (or printer for that matter, XP-drivers, both for parallel and USB interface can be downloaded from the HP site) would NOT support Windows XP.
    It could be, however,  that you need to update BIOS first. If you have a BIOS version prior to 3.0, you will have to update.
    Regards,
    Hans

  • Getting K7T Turbo limited edition what is the fastest processor it will run

    As the subject sugests my friend is about to give me his motherboard, ram and cpu the motherboard is a K7T Turbo-R (I'm assured this is the limited edition one) but he only has a slow old 1ghz processor on it. I've looked at the bios upgrades and I'm not sure what the fastest chip is that I can fit with the latest bios upgrade as it's written in funny english. It says: Support AMD XP 2400+ & 2600+ (K7T Turbo2 only) does this mean both chips are only supported on the turbo 2 or just the 2600+. My educated guess tells me that I would be able to fit a 2400+ as this is a 133/266 FSB processor but not the 2600+ as this is 333mhz. Please can someone help me I'm just starting to learn about computers and I don't really know what I'm talking about!

    Hello,
    If you are sure it is the limited edition then
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=25&kind=1
    "It says: Support AMD XP 2400+ & 2600+ (K7T Turbo2 only)"
    That lines means only the K7T Turbo2 supports the XP2400 and XP2600
    (non 166FSB versions  )
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=24&kind=1
    See they are 2 different boards?

  • Fastest CPU for K7T Turbo Limited Edition

    I would like to ask, which is the fastest processor (Athlon XP) which I can put into this motherboard?? The general information on this website say that up to Athlon XP 2000+, but then there is a link on CPU Support and there is only up to XP 1800+, so what is correct??
    Thanks

    HI. This question has been asked many times. The official word from MSI is that the max. XP cpu is 1800 due to circuit board limitations. Some state that they are running 2000 XPs, but you risk the chance of burning up the board.Regards

  • Processor max. for K7T Turbo Limited Edition

    What is the max. processor this board will support? I've seen 1800+ posted, but is this correct?

    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=25

  • K7T Turbo Limited Edition d-led one green led 3 red leds is it my mobo?? that died

    Hi people   my girlfriend whas just printing somthing when the screen went black and te noise came out of my system...
    I wasn't there but when i came home i opened my system and turned it one ... the D-leds went on (1 green 2,3,4 red and some noise came from my speaker (lika a weak alarm)
    Swiched my video card, memory and my harddisks but no improvements. I don't know what the D-leds mean  
    I need some help here guys  

    So it is the cpu or the power supply ... if i am right the txt belongs to the picture
    I think it is best to bring this machine to a supplyer, becouse i don't have a power supply unit and i can't get that freaking heatsink of the damn cpu ( ) that #$#@#@ piece of @##@@# wont get lose without risking me sticking a screwdriver trough my mobo.....
    - The D-LED will hang here if the processor is damaged or not installed properly
    or you have a weak Power Supply Unit.
    Early Chipset Initialization
    Thx for the great support guys...  
    If you think i should try somthing else that would help ... please let me know.

  • K7T Turbo Limited Edition

    Ok, i have 3 dimm slots for ram on my Mobo, i had 2 sticks of 128 megs. I just bought a stick of 512. Before this i had no need to use the 3rd slot, now i need to, when trying to use all 3 whenever i put any size of ram in the 3rd my computer will crash once windows is loaded and i try to access any programs. I have no idea what is going on, i tried putting each stick of ram in a dfferent slot to see if any of it was bad, they are all fine. I am running Windows 98se and a Athlon XP1700+
    If anyone knows what's goin on please let me know
    thnx
    Mooji

    http://support.microsoft.com/default.aspx?scid=kb;en-us;253912

  • K7T Turbo Limited Edition - AC97 Sound?!

    So, the manual tells me to just pop the CD in after the 4 in 1 driver installation and the Sound Setup should run itself, I should sit back and relax the manuel sez. I do that after the initial reboot from the 4in1 installation. Well, the sound doesnt install itself. Also, the setup menu doesnt even have a install on-board sound option or anything. I started rumaging around on the CD and found the sound files. The question if Which ONE am I supposed to install???!!! I tried both the ones under the VIA folder. They Both tell me that my AC97 is not enabled in the Bios. BUT, I've Enabled the frikkin thing like a thousand times but the setup programs keep telling me that I need to enable the AC97 in the BIOS before they can install.
    ADVANCED CHIPSET FEATURES has the "Onchip Sound" : Auto
    INTERGRATED PERIPHERALS has the "Onboard Legacy Audio" : Enabled
    "Sound Blaster" : Enabled
    "MPU-401" : Enabled
    So, the audio setup files under the Folders D:/Sound/VIA/VT8233 or MVP4
    Keep telling me that I the sound needs to be enabled in BIOS what the heck am I doing wrong??!!
    Thanks ahead of time to anyone who can help. ?(

    OHHHHHHHHHHHHH....... (SMACKS HIS FOREHEAD) I figured that there was something wrong with the Sound Blaster but I though there was some kind of resource conflict. At least the device manager was telling me there was a Error Code 16 on the Sound Blaster and the thing tells me that I need to manually set resources. But for some reason it wouldn't let me do that either. So I got rid of the Sound Blaster from the Device manager. I am running Win 98 SE.
    However the drivers I found on the CD that came with the MoBo are still not installing. It sez that the AC97 sound is not enabled from BIos still and that I need to enable it. I looked all over the manual for the sound jumpers but there is no indication or anything about sound jumpers!!! If you could be a little more specific and tell me where the jumper is??!
    Thanks alot for your help.

  • Problem with memory in k7t turbo limited ed.

    serious problem!! i've got mainbord k7t turbo limited edition with vhipset via vt82c686b. untill now i had one 128 MB memory installed. I want to extend my memory but when i insert another memory to another slot computer does not start... (led status i all red!) no metter to with slot i insert new memory (its the right pc133 memory type) and no matter if it's 128 or 256 MB. Witho only one slot used it work properly even with 256 MB. Problem occurs only with 2 or more slots sed... this memory works with no problems in other computer (different mainboard)
    PLEASE HELP!!!!
    thanks in advance

    Most times is due to incompatibility between memory modules. Best way to avoid it is to buy 2 modules same brand, or one bigger module.

  • MSI K7T Turbo Limited Ed. + XP1700+

    Hi
    I would like to know if my mainboard (MSI K7T Turbo Limited Edition on KT133A) supports XP1700+ 0,13 processor?
    I've already read on this site that it doesn't :( but from the other hand I've heard that some people have those Xp1700+ on the same boards and everythings works fine (with bios ver. 3.6).
    So...will it work or not? XP1700+ 0,18 works perfect.
    Regards

    Hi, it may work but there is no official support for it.
    http://www.msi.com.tw/program/support/cpu_support/cpu/spt_cpu_detail.php?UID=25&NAME=MS-6330%20Ver3.0

Maybe you are looking for