Lock user ID which are kept idle for more than 30 mints.

Dear All,
My requirement is as follows.I need one batch job to lock all user IDs in producrtion system if the user Id is kept idle for more than 30 mints.
Can you pls let me know how I can do it and under which tables the user Ids are stored and is there any standard program that I can use to fullfill my requirement.
Thanks to all of you for your support.
Rgds,
Babu

Dear,
First suggestion - contact your BASIS team.
Secondly, please check the below:
Logging off the inactive users is not set up by default. Setting up the feature of logging off the users improves the security as unattended terminals do not stay active indefinitely.
To activate automatic logging off, do the following:
Go to Profile Maintenance by choosing Tools --> CCMS --> Configuration  --> Profile Maintenance or the transaction RZ11.
Maintain the parameter rdisp/gui_auto_logout. Enter the required number of seconds of inactivity before the user is logged off automatically.
To deactivate automatic logoff, delete the parameter from the profile(s) or set the value '0'.
Regards,
Syed Hussain.

Similar Messages

  • G5 idle for more than one hour

    when i leave my G5 idle for more than one hour, when i enter my password, the system locks. i have to shut off the computer and turn it on again...

    Try restoring the iPod to factory settings/new iPod.
    If still problem then I would make an appointment at the Genius Bar of an Apple store and hear what they have to say.
    If a bad battery:
    Apple will replace it for $79
    A third-party place is less expensive. Here is one:
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace it yourself.
    iPod Touch Repair – iFixit

  • I have a licence code for Adobe CS6 Master Collection which I'm using for more  than a year, suddeny I am in trial mode (all programs)  an it seems that this code is not accepted anymore. Help needed!!

    I have a licence code for Adobe CS6 Master Collection which I'm using for more  than a year, suddeny I am in trial mode (all programs)  an it seems that this code is not accepted anymore. Help needed!!

    Chat Now button near the bottom for Activation and Deactivation problems may help
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

  • SAPup phase is idle for more than 12 hrs

    Hi all,
    I am BW 3.1 upgrade to BI 7.0
    We have a J2EE engine 6.20 running on BW 3.1 so i installed as on Note: 934615
    then started the ABAP upgrade.
    Now upgrade is in SAPup phase giving info like
    "The parallel running java upgrade wil take some more time"
    I tried to stop and restart again its coming to the same phase.
    And its is idle for more than 12 hrs.
    Pls guide me solve this issue..
    Thanks & Regards
    Karthikeyan

    Got stucked because of Java, uninstall java instance. Issue got resolved

  • Firefox hangs after it has been left open but idle for more than about 30 minutes.

    Any idea what could be causing this or how I fix it. I've tried to uninstall and reinstall the software

    Hi,
    As you can see from the theory this alert could mean two things:
    1. Too many powershell scripts are executed on agent simultaneously
    2. There are scripts that takes much time to complete
    First of all, you need to evaluate a script-based module (workflow). You need to find answers to following questions:
    – What is the target for this script-based workflow?
    – How many instances of this target class are exist on the affected computer?
    – Does this script leveraging a cookdown concept?
    – How long it take for script to complete?
    Please go through the articles below for more details:
    http://www.systemcentercentral.com/research-this-kb-power-shell-script-was-dropped/
    In addition, here is a similar thread for your reference:
    Threshold for SCOM 2012                                 
    https://social.technet.microsoft.com/Forums/systemcenter/en-US/00dc16c4-9858-459a-8c65-7d73ac8cc997/threshold-for-scom-2012
    Regards,
    Yan Li
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • After upgrade to 7.0, crash when left idle for more than a few minutes & if click contact without checking the box first.

    I had no serious problems with Firefox until downloading the current version. Since then I've had frequent crashes, usually several times a day, and even with CTL + ALT + Delete I have difficulty closing Firefox down. The crashes happen more frequently when I leave the program idle for, say, 15 minutes or more or when I attempt to open a contact for editing by directly clicking on the contact name, without checking the box first.
    My anti-virus software is ESET-NOD.

    I get this on firefox. I get this on waterfox. I get this on nightly. I don't get it on chrome. I don't get it on internet explorer. I don't get it on comodo dragon. I don't get it on arora. I don't get it on konqueror...... Anyone noticing a pattern here?
    I'm willing to admit that it's probably something to do with my isp server, so Mozilla can feel holier than thou about it, but if that's the way they insist on going, I suggest that the next time they upgrade, they call their browser Canute.

  • Monitor any record to stay in queue for more than 5 minutes under AQ ADMIN schema

    Hi All,
    We need to prepare script which monitor/notify us the record which stays in queue for more than 5 minutes under AQADMIN queue tables. Can someone throw light on this?
    Regards,
    MD

    Hi Asif,
    We need script to monitor if we have "waiting" status in msg_state column of the below table is waiting for more than 5 minutes.
    SQL> desc AQ$TBL;
    Name                                      Null?    Type
    QUEUE                                              VARCHAR2(30)
    MSG_ID                                    NOT NULL RAW(16)
    CORR_ID                                            VARCHAR2(128)
    MSG_PRIORITY                                       NUMBER
    MSG_STATE                                          VARCHAR2(16)
    DELAY                                              DATE
    DELAY_TIMESTAMP                                    TIMESTAMP(6)
    EXPIRATION                                         NUMBER
    ENQ_TIME                                           DATE
    ENQ_TIMESTAMP                                      TIMESTAMP(6)
    ENQ_USER_ID                                        VARCHAR2(30)
    ENQ_TXN_ID                                         VARCHAR2(30)
    DEQ_TIME                                           DATE
    DEQ_TIMESTAMP                                      TIMESTAMP(9)
    DEQ_USER_ID                                        VARCHAR2(30)
    DEQ_TXN_ID                                         VARCHAR2(30)
    RETRY_COUNT                                        NUMBER
    EXCEPTION_QUEUE_OWNER                              VARCHAR2(30)
    EXCEPTION_QUEUE                                    VARCHAR2(30)
    USER_DATA                                          TEST1
    PROPAGATED_MSGID                                   RAW(16)
    SENDER_NAME                                        VARCHAR2(30)
    SENDER_ADDRESS                                     VARCHAR2(1024)
    SENDER_PROTOCOL                                    NUMBER
    ORIGINAL_MSGID                                     RAW(16)
    ORIGINAL_QUEUE_NAME                                VARCHAR2(30)
    ORIGINAL_QUEUE_OWNER                               VARCHAR2(30)
    EXPIRATION_REASON                                  VARCHAR2(31)
    CONSUMER_NAME                                      VARCHAR2(30)
    ADDRESS                                            VARCHAR2(1024)
    PROTOCOL                                           NUMBER
    Regards,
    MD

  • How to find the tables which are the candidates for gathering stats in 10g

    Hi,
    In 10g how can we find the tables, partitions which are the candidates for gathering the stats.
    I want to findo those tables, partitions and gather the stats on daily basis.
    Thanks,
    Mahi

    The probem you describe has been posted about before. There are known issues with the default dbms_stats parameter settings for some environements.
    What you can do is just go ahead an manually submit dbms_stats commands with appropriate parameters for tables that have not been analyzed or modify the maintenance window to give it more time.
    I would rather just generate the missing statistics myself then the job can continue to run in the normal maintenance window. Since the job should be looking only for tables that meet the stale requirements then once everything is analyzed it is likely the job can keep the statistics updated in the default time allowed.
    Be warned that the default parameter settings do not work well for some tables in some environments and if that proves true for your shop you can generate workable statistics on a table and then lock them so the nightly job ships regenerating the statistics for that table. You would then manually unlock, generate, and lock that statistics for that table as necessary.
    HTH -- Mark D Powell --

  • Which user and which procedure takes snapshots for AWR in 10g??

    Hi, all.
    Which user and which procedure takes snapshots for AWR in 10g??
    The snapshot interval is 1 hour.
    I checked dba_scheduler_job, and dba_job.
    However, I was not able to find a job which takes a snapshot.
    On EM, I can see snapshots are being taken per one hour.
    Thanks and Regards.
    Message was edited by:
    user507290

    Dear Shmyg and VAS.
    Thanks for your reply.
    MMON takes a snapshot and stores snapshot information in DBA_HIST_** tables.
    Right??
    Does MMON have something to do with dbconsole and emagent??
    Even when I stopped dbconsole and emagent, snapshots are being taken.
    If so, what does do dbconsole and emagent??
    Thanks and Regards.
    Message was edited by:
    user507290

  • Kindly refer to Case Id No. 525700065 in India.I have talked to various people on my case for more than 5 hours ( Total talk time) The people give various different answers and aim really fed up now. What do i do? Many apple phone users are especially fed

    Kindly refer to Case Id No. 525700065 in India.I have talked to various people on my case for more than 5 hours ( Total talk time) The people give various different answers and aim really fed up now. What do i do?
    Many apple phone users are especially fed up with RSGI Communication , Erandwana, Pune, Maharashtra, India.
    Their service report No. 36679.
    Allthough Mr Punit ( Technical Dept. Apple.) had requested RSGI to chance the device, still RSGI said they do not have the device ( I phone 5, white ,16GB) in stock.
    Today when we contacted them they said they won't be able to replace OR order to Apple unless and until we do not keep the device with them for 3 days.
    Mr Deepak of Technical Dept Apple was contacted who's telephonic Transript as proof is available with us.

    Who exactly are you addressing your screed to
    There are  no Apple Staff on this forum ,it is User to User

  • I've got an iPad and iPhone 4S, both of which are set up for facetime. When someone calls me, both the iPad and phone ring, even though the phone is set to receive facetime calls on the number and the iPad is set for an email account. why is this?

    I've got an iPad and iPhone 4S, both of which are set up for facetime. When someone calls me, both the iPad and phone ring, even though the phone is set to receive facetime calls on the number and the iPad is set for an email account.
    How can I change the setup so on the email only the iPad rings and on the phone number only the phone rings?

    No it's not stealing. They have an allowance that you can share with so many computers/devices. You'll have to authorize her computer to play/use anything bought on your acct. You can do this under the Store menu at top when iTunes is open on her computer.
    As far as getting it all on her computer....I think but I am not sure (because I don't use the feature) but I think if you turn on Home Sharing in iTunes it may copy the music to her computer. I don't know maybe it just streams it. If nothing else you can sign into your acct on her computer and download it all to her computer from the cloud. Not sure exactly how to go about that, I haven't had to do that yet. I wonder if once you authorize her computer and then set it up for automatic downloads (under Edit>Preferences>Store) if everything would download. Sorry I'm not much help on that.

  • Could anybody tell me which are the tools for diagnosting the APPs ?

    Hi,
    Could anybody tell me which are the tools for monitoring/ diagnosting the Oracle Apps ? Is any tool (Oracle or not) to monitor the concurrent manager?
    Thanks,
    Paul

    read this
    http://www.oracleappshub.com/11i/diagnostics-made-easy-oracle-diagnostic-tool/
    http://www.oracleappshub.com/11i/diagnostics-made-easy-oracle-diagnostic-tool-p/

  • Please , I wonder if I can subscribe for more than one sync accout on the same Desktop? I mean that we are multi-users for the same desktop , so we need some privacy.

    I and my brothers and sisters use the same desktop , so we need to subscribe for more than a single sync account , and I don't know how. Thank you

    If you each have a separate Windows account then each of you should automatically have a separate Firefox profile.
    If you use the same Windows account (not much privacy in that case) then you will have to create a separate profile for each of you and a desktop shortcut to start each profile.
    * http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
    * http://kb.mozillazine.org/Shortcut_to_a_specific_profile
    * http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

  • OATS Load test is not able to scale for more than 10 users

    Hi,
    I am using OATS load test runner for performance testing Fusion based application on webcenter portal.I am not able to run OATS load tester sucessfully for more than 10 VU's.After that it gives a component not found issue or loop error.Please let me know if anybody faced similar issue and was able to resolve it.Is there some setting to be done?
    Thanks,
    Ritesh
    Edited by: user766882 on Aug 20, 2012 9:07 AM

    Hi Jean,
    Our application contains customised retail webcenter portal on which retail application is hosted.This portal application is not able to scale up more than 10 users.I had created portal application without the customised framework and then for a similar usecase it is able to scale upto more than 50 users but once it hits 100 VU mark it starts giving errors.If it were an issue with client tokens or login,I would have been able to have more than 1 user at a time.It seems to be an issue with custom framework developed on top of webcenter portal.I have faced a similar issue while testing for this app with jmeter also.I was able to test for the webcenter portal app without any customisation for more than 100 concurrent users. But I was not able to test for more than 1 user for customised retail webcenter portal
    Thanks,
    Ritesh
    Edited by: user766882 on Aug 21, 2012 8:25 AM
    Edited by: user766882 on Aug 21, 2012 8:33 AM

  • Reversi Sample - "The project requires user input. Reload the project for more information."

    A week ago, I downloaded the sample code examples.  Then I extracted the reverse sample code, loaded it and ran it.  All was well.
    I was just using it as a resource for example code, so no code changes.  Now, when I open the project, I get nothing loaded.
    Solution explorer displays       Solution 'Reversi' (0 Projects).    Below that
    "The project requires user input.  Reload the project for more information."
    This message shows for all three sections  Reversi, ReversiGameComponet, and ReversiComponentTests.
    Ok, so I figure I must have accidently changed something.  So, I re-extract.  Same message. 
    The only thing I can think of is that in the options, I changed the startup location for my projects.  I like to keep my code projects on the d: drive, so I changed that to D:\!!!W8.  I've always done this so that when I create a new project,
    it does it in my project directory by default.  Didn't change anything else such as the templates dir.
    I did set this back to the c:....projects, as where templates are, but that didn't help.  So, I reset to my projects directory.
    My project that I created loads ok.
    Suggestions?

    A week ago, I downloaded the sample code examples.  Then I extracted the reverse sample code, loaded it and ran it.  All was well.
    I was just using it as a resource for example code, so no code changes.  Now, when I open the project, I get nothing loaded.
    Solution explorer displays       Solution 'Reversi' (0 Projects).    Below that
    "The project requires user input.  Reload the project for more information."
    This message shows for all three sections  Reversi, ReversiGameComponet, and ReversiComponentTests.
    Ok, so I figure I must have accidently changed something.  So, I re-extract.  Same message. 
    The only thing I can think of is that in the options, I changed the startup location for my projects.  I like to keep my code projects on the d: drive, so I changed that to D:\!!!W8.  I've always done this so that when I create a new project,
    it does it in my project directory by default.  Didn't change anything else such as the templates dir.
    I did set this back to the c:....projects, as where templates are, but that didn't help.  So, I reset to my projects directory.
    My project that I created loads ok.
    Suggestions?
    Hi there,
    Can you provide the link for the sample code example so I can download and try on my machine?
    Regards,

Maybe you are looking for