Locked 3GS working with Indian Service provider while iphone 4 does not ?

So my friend got a iPhone 3GS from the states and ofcourse it was locked with AT&T but upon reaching here when he inserted his Aitel Sim in it worked without any jailbreak or unlock. On the other hand i recently bought a iPhone 4 with 4.1 stock firmware and 2.10.4 baseband and it does not work with either of the official carriers let it be Airtel or Vodaphone even if we buy a microsim directly from the service provider(Yes they are available here on request).
Why is it so. Also last i heard was that Apple added few more carriers with the 4.2.1 update. If that is to be correct then does a iPhone 4 works here in India with that update without the jailbreak or unlock.
TIA
Naughtie

How is it that your friend got an iphone 3G S from U.S and that how does it work with Aitel Sim? All U.S purchased iphone are carrier locked to AT&T, and there is no official way to unlock them. They only way you can is to jailbreak and unlock it from there but otherwise a non-hacked u.s iphone will not work with other sim card. So it is likely that the phone your friend got is a hacked phone. You can also tell if your friend updates his phone to the latest firmware, that the phoen will go back to normal state and I bet you that the Aitel sim will not work.

Similar Messages

HT201407 Ipod My daughter locked my iPod with a code and now she does not remember it It is locked and it will not work connected to iTunes

My daughter locked my iPod with a code and now she does not remember it It is locked and it will not work connected to iTunes

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software.

HT1841 How to disable some of the automatic function from my bluetooth (jabra) while iphone does not have the capacity to set up the bluetooth property like BB?

How to disable some of the automatic function from my bluetooth (jabra) while iphone does not have the capacity to set up the bluetooth property like BB?

Sorry. You're not making sense. Please re-phrase the question or post in your native language.

Does PSE 13 work with track pad? (PSE 12 does not)?

I am considering upgrading to PSE 13 but with PSE12 there is a serious problem with the track pad. It does not work with Yosemite and PSE 12. Get spinning ball and cannot use many tools like quick select, lasso etc.
I have to use the mouse. There has been discussion on this forum and hopefully a bug report has gone in to Apple or Adobe whoever is responsible.
SO here is my question. Has PSE 13 been tested to determine if track pad works? Many Mac users have portables and do NOT want to have to carry around a mouse.
I am not going to spend to upgrade to 13 if the track pad problem is present in that version.

The issue with trackpad does not exist in Elements 13.
You can download the trial before you buy and give it a try.
Regards,
vaishali

My blackberry is not working with my service provider

my O2 blackberry stop working with all Nigeria service provider, what could be the root cause of this

Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescribed for most glitches and operating system errors, and you will lose no data on the device doing this.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Making the WMB54G work with Vista (Service Pack 1) - it does work.

I posted this in response to a thread, thought it could use its own topic.
There is hope and potential success for Vista users!   I got the WMB54G 2 days ago. I spent 6 hours with it and nearly threw the product AND my computer out the window the first night. I scoured this forum for the past two days, and by putting pieces together from various threads, I'm now using the Music Bridge successfully with my 1 month old Dell XPS M1530 with Vista Home Ultimate with Service pack 1.  Once I had my gameplan, it worked perfectly the first time I tried the new approach. I will try to write a step by step process of what I did in the next few days but for now.....
1. Throw out the installation CD that comes with the music bridge (its useless for Vista).... I'm kidding, but you get the point.
2. You HAVE to dowload the Vista compatible installation utility and Firmware upgrade from the Linksys forum - I don't have the link right now, but its here in this forum.
3. Run the Vista driver setup to install the Musicbridge utility - the "Install utility" link at the bottom of the setup screen, but DO NOT try to configure the router since you'll just have to do it again later.
4. Run the firmware upgrade for the router (it behaves exactly like the setup utility, but instead of configuring the hardware for use, it upgrades the fimware)
5. Run the Vista driver setup to configure the router (only after the firmware upgrade).   I didn't have to do anything outside of the auto setup. i'm using a Linksys wireless G router as well, and it connected with 64 Bit WEP encryption no problem once i entered my encryption passphrase.
6. Open up MSCONFIG and disable the CMFLYWAVE Application on Startup
7. In your Program Files directory, find \Linksys\wmb54g\wmb54g.exe, \Linksys\wmb54g\driver\cmas2ds.exe, and \Linksys\wmb54g\driver\cmflywav.exe - For all three files, right click and go to Properties\compatability.   Check the "Run this program in compatability mode for:"   pick XP with SP 2.
THANK YOU SO MUCH TO THE PEOPLE WHO POSTED THAT LAST BIT!!!!
8. I'd suggest restarting the computer now.
9. You might get a "WMB54G.exe has stopped running error" on restart... that's ok
10. Start the following files in this order:
cmas2ds.exe
cmflywav.exe
wmb54g.exe
11. The utility should start, and then you can connect to the bridge via the system tray icon. - you might have to also set the default audio device to the Music Bridge by right clicking your system tray speaker icon
12. Uncheck the "Start the Music Bridge when I start Windows" option in the utility screen - and execute the three files in step 10 each time you restart.
I hope this works for you.
Solved!
Go to Solution.

I finally got my WMB54G to work with Vista SR1. It took me 4 hours of struggling to figure it out though.
What I did was:
1. Download the latest utility and firmware from the linksys support site.
2. To set up the device, preferably use http://192.168.1.210. There are http setup instructions on the linksys customer service site. Alternately, you can use the setup wizard on the CD but I would recommend avoiding it if you can. If you do use the setup CD and it installs the WMB54G utility, promptly uninstall the utility afterwords and restart the computer.
3. Update the firmware to v.2.18 by using http://192.168.1.210 and going to the HELP tab
4. Install the latest utility from the support site but do not run the main setup. Simply run setup.exe in the utility folder AND GIVE IT PLENTY OF TIME. Walk Away and let the installer finish and close. Then do the thing people discovered -- edit the properties of C:\Program Files\Linksys\WMB54G.exe and make sure it is set for running in XP compatability mode.
5. Restart the computer
Mine started working fine after I did all of this -- the WMB54G came up automatically and found the device. Keep in mind I do not have WEP or anything -- just unsecured wireless.
Good luck.
Mike
Message Edited by jmfife on 01-17-2009 10:51 AM
Message Edited by jmfife on 01-17-2009 10:54 AM
(Mod Note: Edited due to non-compliance of forum guidelines.)
Message Edited by giantherockstar on 01-17-2009 11:05 AM

HT204023 I think there is a setting in my I pad forbed me from using hot spot , my sim works at diffrent I pad while it does not work with my I pad

Trying to use personal hot spot , it des not work . Using the same sim in a different device of the same type and operating system and generation it works correctly . It was working before in my I pad , why it is stopped , I wish to know , did I made a mistake ? what is it , did I changed the setting by mistake hindering the work of hotspot , advice me please
Yasser

Please do not give this any thought. I was such a dummy.. duh, you have to have something running to PLAY the input!!! I thought the Monitor was on in garage band, and found it was not.....
have a nice day
Sure wish you could remove posts you've made after you do the "DUH" thing.
dale

Tired of working with Verizon on a phone that does not work. FASCINATE.

Since I got my fascinate a six months ago I have had nothing but problems.. At this point in time, I don't get phone calls and can't make phone calls, I don't get text messages either at all or not for hours later and the ones I send people are not getting for hours and hours later, and when I send a text it keeps coming back not sent. And it drops my calls when I can get it to work. So Verizon's solution is to replace this phone now twice and send me an extender box free..(By the way my phone doesn't work anywhere it is not just an at home issue) ..So I am sitting right next to this powerful extender box which cost $250.00 if you were to buy it and I am not getting a phone call, text message and can't make a call or send a text message..Box working real good.
I don't know I am paying $175.00 a month for three phones and I can't use mine at all.
If VERIZON don't get it fixed this week...I'M DONE.. Being jerked around with "Oh lets do this reset or that one and lets send you another phone. I have not had service for 6 months but I have been paying my bill for the last 6 months..
So anyone else have these issues? And if you did and got an new phone (droid incredible 2 or charge) which one worked better for you? Thanks..

df78 wrote:
darlenecd wrote:
Like I said SHAME on Verizon for not stepping up and doing the right thing by the people.
Should we expect any different from Verizon, just look at they way the are treating their employees.
The reluctance to make it right for fascinate owners and their refusal to negotiate with their employees are both examples of pure corporate greed.
I have to chime in on corporate greed. The wireless side of Verizon has laid off a few thousand people recently. I wonder if the CEO or board of directors took any pay cut?
I don't blame the lower folks for poor service, it all starts at the top and trickles down.
And yes VZW should offer to make things right with each Fascinate owner, but that will not happen.

RFC works but web service for that RFC does not work..weird??

hi all,
I created an RFC enabled function module to create a Sales Order in SAP CRM for both for Varinat Configurable and Normal Materials.
The RFC Works well...if i test it..it creates an order and if i go and check the sales order in CRM GUI. i find that sales order is perfect with the configuration data for the configurable items..
Now i created a Web service for this RFC by calling the Web service creation wizard.
Now i am testing the Web service in SOAMANGER T-code and the sales order is created and weird thing the configuration data is missing for Varinat configurable item..
But i dont encounter this problem if i am testing the RFC directly
What could be wrong...why is my web service behaving weird?
I am dying to find this out..did any body enocunter this situation befor ..please help

Sure Oliver..
I put a break point using external debugger and when i was testing the Web service in SOAMANAGER..
i could then land into ABAP debugger.
There in my RFC i put a logic such that i diffenetiate between VC and Non-VC items and fill the Charateristic Values only if it is aVC item.
I saw that the IF condition was not executing as they suddenly changed the material structure in ECC and it reflected in CRM.
SO i am inputting 18 digits of material no like '000000000000000001' for '1'...but the if condition was checking against 1 =1 so that loop never executed and chara values are not getting filled.
But if i test RFC in se37 ..it works as i am inputting 1...
Since Web service works with XML (WSDL) need to be very careful with the format in which data is inputted and the format in which the logic we wrote in RFC works.
Once again ..thanks to all people who helped me with the answers...
Regards,
Jessica Sam

How do I get back to FireFox 5. The 7 version will not work with the college's MIS - which does not support version 7, which was downloaded automatically.

The Angel management system used for classes does not support version 7. That's huge.

Old versions of firefox 4,5 & 6 are no longer supported or considered secure. You put your system and your personal data at risk if you use them. Further more if you download from third party sites you face other potential risks or inconveniences.
The recommended official solution is to use Firefox 3.6 which is still supported, and will be 3.6.23, which will upgrade soon to 3.6.24
Another alternative is to use the current secure firefox for all day to day work, and use a separate firefox portable for the problem school site. With luck a firefox portable version will be available with firefox 3.6.23 which is currently the supported version. http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

Need Sceptre TV Remote Control code(s) that work with VZ P265v3RC -- the '335' code does NOT

Recently upgraded my TV's in my house with new Sceptre 40" and 50" TV's - thank you WalMart. Purchased in September 2014. (new / current Sceptre TVs).
All of the Verizon printed, online, and other documentation for the P265V3 RC (model RC2655005/01B) for Sceptre shows to use code '335'. I have tried the '335' code on both of the TV's and no worky at all.
Following the 'Quick Setup Guide-Verizon FIOS remote' steps (paper/PDF instructions with RC Manual):
I can successfully enter the '335' code as outlned in step 4... and 'The RED LED will blink twice and then stay on'. occurs. So far, so good.
Step 5 states, "5. Press and release the <CH +> button repeatedly until the TV turns off......." This happens perfectly... I can press the <CH+>> button a few times, and indeed, my TV turns off.
Now, onto Step 6: "Test that the remote control is programmed for your TV"..... can't get Mute, A/V, other keys to activate /. be recognized - even though I'm followijng "press and hold that key. Release it as soon as it works"
Does anyone have a working code for Sceptre TV's ??? The Verizon '335' code doesn't work for me.
I need the 'best code' anyone has found that works with new Sceptre TV's.... the 335 code that VZ recommends... no worky.

Robertop,
have you tried the following? The info below is found here
Turn on your TV and the FiOS TV Set-Top Box.
Make sure you can see live TV.
Press and hold the OK and FiOS TV buttons together then release both buttons.
The red LED light blinks 2 times and then stays on.
Press and hold the Play button.
The remote control tries a new TV code every second.
The red LED light blinks each time a new code is sent.
When the TV turns off, release the Play button immediately.
NOTE: Some TVs may respond slower than others. If necessary, you can press the Ch+ and Ch- buttons to go forward or backward one TV code at a time.
Test your remote to ensure it is working properly:
- Turn on the TV by pressing the TV button on your FiOS TV remote.
- Press the Vol+ and Vol- buttons to ensure that you can control the volume.
- Press the Mute and A/V buttons to ensure they work.
If any of these buttons do not work, press and hold that button. Release the button as soon as it works.
If all the buttons work, press OK to this TV remote code.
The red LED light blinks 3 times and then turns off. Your remote control is now programmed.

T61 worked with Dual Monitors and now it does not

I'm having trouble getting two monitors to work. They used to work fine. There have been no changes to hardware. Now the DVI monitor is blank. The DVI monitor does work with other computers (I'm working through a KVM switch).
T61 running XP Pro
Docking station
Worked well in the past
Took laptop to a meeting and used VGA and Laptop displaying the same information (needed to fool around with a few things to get that to work (FN-F7, Presentation Director, not really sure what worked)
Came back to docking station and my second monitor does not work anymore.
Control Panel
Shows two monitors (1 Bright, 2 Grayed)
Can select and choose extend on the second monitor (1 Bright, 2 Bright)
Apply reverts to (1 Bright and 2 Grayed)
NVIDIA Control Panel\
Set up multiple displays show choice is Only use one display (Single)
Second monitor choice is grayed
Presentation Director
No option is shown for two monitors
Laptop and monitor choices exist
BIOS Display
Tried Internal and PCI options (no joy with either)
Display is set to VGA & DVI
Any suggestions??

The docking station is a type 2504. I have both the VGA and the DVI port hooked up to identical flat screen monitors. I have no intention of messing with that because the setup is working successfully via a KVM switch. Both ports and both monitors are working. However, there is a problem with swithching modes with the Lenovo laptop. The problem does not exist with any other computer working through the KVM switch.
Please note that:
this Laptop on this docking station, at my home, with all wiring and monitors unchanged, has worked for a long time.
I took the laptop off the docking station, went to a meeting, hooked up to a projector, and successfully configured the laptop such that the laptop screen and the projector were displaying the same screen at the meeting.
Then, I brought the laptop back to the same old docking station at my home and tried to regain use of my dual monitors unsuccessfully.
Using Control Panel display, and all sorts of combinations of NVIDIA Control Panel, the 2nd monitor would not be consistently detected by NVIDIA Control Panel. During these attempts, on a few occasions, I had an option to Set Up Multiple Displays in NVIDIA Control Panel; but there was no success in choosing this option. Returning to NVIDIA Control Panel / Displays would not present Set Up Multiple Displays as a valid option (not present or greyed - can't remember). I even went through permutations with the laptop screen open and closed, warm boots, cold boots, searchign for new hardware, etc. Nothing was successful.
Although changing the display within Windows Control Panel / Display was an option, any attempt to extend or replicate the dispay on the second monitor would fail and Windows Control Panel / Display would go back to the single monitor configuration was not successful and effectively ignored by both Windows Control Panel / Display and NVIDIA Control Panel.
You may note the use of past tense. I simply gave up and went to doing productive work on one monitor. After a few weeks, I went back to NVIDIA Control Panel and the second monitor was detected. I was able to Display / Set-up Multiple Displays via NVIDIA Control Panel. Subseaquently, I was able to use Windows Control Panel Display to enable and configure the second monitor and both monitors started working again (without having made any changes to wiring etc).
I don't believe there is any difference in how I used NVIDIA Control Panel on this successful attempt than in any of the earlier failed attempts. There seems to be some sort of a problem with getting the Lenovo to recognize that the second monitor is really there. Please addess this part of the problem as I expect to repeat the process in an upcoming meeting with this laptop.
Thank you for your attention.

Does Windows 7 work with an Airport Extreme. Mine does not recognize it

Does Windows 7 work with an Airport Extreme. I can't get mine to connect with it? The package insert says it only works with XP or Vista

This should help:
http://docs.info.apple.com/article.html?artnum=86258
Use system profiler to identify which iMac you have
exactly. If your iMac has USB 2.0, then I think you
can only fit Airport Extreme anyway.
I have a question too ... I'm about to fit an Airport
Extreme extreme card to my 15 inch USB 2.0 iMac too.
Is the aerial already built in? I presume one is
required in some form?
James--I'm afraid that your link doesn't help me. I'd already seen that, and found that my iMac seems to correspond to two different categories--being both a 17-inch flat panel, and a 17-inch 1GHz. According to Duane's post, iMacs with clock speeds of 1 GHz or greater take the Airport Extreme card. According to two different individuals at a local Apple Store, I got two answers. One said Extreme, the other said, nope, the old Airport. How do I determine the "for sure" answer? Anybody know?
FWIW, here's my sys profile info:
Hardware Overview:
Machine Model: iMac
CPU Type: PowerPC G4 (3.3)
Number Of CPUs: 1
CPU Speed: 1 GHz
L2 Cache (per CPU): 256 KB
Memory: 512 MB
Bus Speed: 133 MHz
Boot ROM Version: 4.5.8f1
Serial Number: QT3050UCNHX
Thanks any and all for help.

My service provider's SMTP does not require a password but the option "non" does not appear on the IPOD Touch 5th gen. Fix?

I have relay.skynet.be as my outgoing server and it does not require/allow password protection. When configuring mail on the Ipod the option of "non" is not given for the outgoing server. Is this a skynet issue or is there an Ipod solution?

Google for:
setup XX email on iphone
to see if ony of the returned sites help.
XX is you email provider.

I have a hp mobile printer with Bluetooth and my 4s iPhone does not detect it what can I do to set this up

My iPhone 4s does not detect Bluetooth

bluetooth is just a interface like usb drivers are still required
and in the case of ios devices an app made by the printer maker
not sure if hp support their bluetooth printers on ios devices but if they do it's with an app you get in the app store
bluetooth is not airprint enabled

Locked 3GS working with Indian Service provider while iphone 4 does not ?

Similar Messages

Maybe you are looking for