Locked and unlocked phone identification Model MC 603 X

My mobile Iphone 4 Model MC 603 X is locked or unlocked phone how to distinguish it what is the way it is identical.

Your carrier should send you an email. Also note that, if THIS phone ever needs to be replaced, the replacement would be locked even though your carrier unlocked it, because it was locked at the time of purchase. If this happens you would have to resend the unlock request.

Similar Messages

  • HT1212 My  fully charged iPhone screen is black and not responding. what can I do to get it to work again? I have never syncd on iTunes. I connected to my laptop and iTunes app displays error msg saying phone is locked and unlock phone to connect.

    My fully charged iPhone has a black screen and is not responding but has Siri and sound.  I connected to laptop and iTunes gives error msg indicating phone is locked and I to enter passcode. but I can't enter the passcode because the screen is black. I have never syncd with iTunes. What can I do to get my  phone back?

    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • Txt received sound both with locked and unlocked phones.

    When I receive a txt my iPhone will make a sound with a locked screen, but when I unlock I hear the same sound again. Is there a way to turn off one of the sounds?

    Settings / Notifications / Messages
    Knock yourself out, oodles of adjustments to tweak on how you want the phone to let you know a message awaits.

  • My phone keep locking and unlocking several times

    Device info
    Your carrier: T-Mobile
    Model info and OS version: Curve 8900 and Blackberry OS v4.6.1.231
    Apps and free space
    Did a battery pull fix your issue? Temporarily
    Apps installed and their version if possible: No apps because I do not have internet on the phone
    When writing your question
    Good description of what is really wrong and how to reproduce if possible. Details of what you did before:
    I didn't do anything to it but before the speaker would fuzz in and out of call and then it started doing that permanently. Afterwards my phone just started to lock and unlock several times before it ultimately locked me out even after I tried to press the unlock button. I tried pulling out the battery several times and it alleviates the symptoms for about 3 minutes and it goes right back to locking and unlocking again. I have no idea what is wrong but I appreciate any responses and Thank You in advance.

    Hello
    Usually I would advise a hard reset of your handset, but it doesn't seem like it's possible if you only have access to your handset for a few minutes before the fault occurs.
    Go to www.blackberry.com and download the blackberry desktop manager, then use this to update your handsets software, I have seen the desktop manager not recognise there is an update from an 8900 on OS 4.6, if this happens you can find the newest 8900 software on the blackberry website - download this and install it to your PC. Once it's downloaded you need to search for updates in the desktop software and when it says none available select 'view previous versions', then select the software you just downloaded.
    Hope this helps
    Adam
    EE Blackberry Specialist

  • Locking and unlocking one's phone's keyboard, how?

    How do I lock and unlock my phones keyboard?  I tried finding the answer on my own but failed.
    "Don't make me think!"

    If you are talking about the functinal modules for locking/unlocking client. They are
    SCCR_LOCK_CLIENT and SCCR_UNLOCK_CLIENT
    Thanks,
    Giri

  • My phone keeps locking and unlocking itself

    One day I got home from skateboarding and I tried locking my iPhone and it wouldn't lock. I've never dropped it, and the button is still pushable. It seemed fine and it was in the same spot when I left so obviously no one had messed with it. After a while of people pressing the button, its almost like it catches up to my phone, and then it locks and unlocks itself and goes into little glitch fits. Its so frustrating because then when I try to use my phone it just locks itself and it takes forever for me to be able to keep unlocking it to be able to send a text or do something. Is there anything I can do? unfortunately my one year warranty has expired in september, and my mom didn't get me insurance for the phone. so is there anything that can be done for it? thanks,

    Not without a warranty still in effect.  You might ask about how much it costs to have it fixed (usually it's swapped out for another used phone).

  • Keyboard lock and unlock for 8330

    I need a way to lock and unlock the keyboard.  I have searched a number of websites for an answer to my dilema and it seems several methods are mentioned but none work for me.  I need to lock the keyboard when phone is in my pocket.  Many thanks to anyone who can help.

    Well, according to your device manual, this is the procedure:
    Lock the keyboard
    If you do not set a BlackBerry® device password, you can lock your keyboard to avoid making calls and pressing keys accidentally.
    On the Home screen or in the application list, click Keyboard Lock.
    To unlock the keyboard, press the asterisk (*) key and the Send key.
    You can look further into your manual here:
    http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=http--docsbl...
    Good luck.
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Could not lock and unlock my bb on the top left. PLEASE HELP ME

    Hi everybody. I really need your help. My bb is 9780 and suddenly my button lock and unlock on the top left doesn't seems like working. And now when i hold the alphabet 'A' my bb can be lock but when i want to unlock it ,i cant just seems to unlock it. The only way to unlock it and use my bb is to turn off (remove d battery)  my phone and restart it again.
    This is very troublesome. Please someone assist me in this and help me out.
    Really thank you all in advance.

    Just wait it out. Given how many people are having this issue, it seems to be on Apple's end, so all you can do is wait for them to fix it.

  • I get Blackberry 9800 and using last 18 months.Now lock and unlock not working I am in India No chance to repair in India since get out side

    I am using blckberry  9800 for the last 18 months.Now it is not woring lock and unlock .I contact all dealers in India and they told they are unable to service and repair since I purchased from out side India.I purchased from Dubai .What shall I do please

    No matter where you purchased it, it's beyond the one-year warranty.  To repair it would probably cost more than it would to replace it with a new phone (even if it's a used phone and new to you).
    I hope that helps you. 
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • Apart from the lock button problem in iphone 5 the display brightness suddenly goes blank and becomes normal after locking and unlocking the iphone. The Apple service centre in India is denying to service the iphone as it was purchase in USA even thoug it

    Apart from the lock button problem in iphone 5 the display brightness suddenly goes blank and becomes normal after locking and unlocking the iphone. The Apple service centre in India is denying to service the iphone as it was purchase in USA even though the iphone is in warranty.

    iPhones do not have an international warranty.  Warranty is valid only for the country of purchase.  This is most likely because different countries require different iPhone models.  Not reasonable to expect all countries to maintain stock for all models.

  • What is BPMN Lock and Unlock?

    Hi,
    I tried to get some help on BPMN lock and unlock to understand if this can be used for check out and checkin model for version controlling.
    Can any one please clarify?
    regards,

    Hi,
    Implicit version control is not supported in the current release, but it will be supported in Release 11 (upcoming release).
    In 10.1.3.4 the model gets locked while editing (user A). If user B wants to open the same model he can have only read access to it. Therefore different versions of processes have to be maintained in an external source control system (for now). In this context it might be helpful for you to investigate the XML-Import/Export functionality combined with an external CVS.
    Additionally, models and databases can be manually released and versioned in ARIS using the appropriate attributes (as per project conventions). Please have a look to my post at Re: Control Version and see if it helps to get some ideas for your requirements.
    Best regards,
    Danilo.

  • How do i use the "Alt+Ctrl+;" keyboard shortcut to Lock and Unlock Guides in Adobe Illustrator?

    Hello,
    I've been trying to lock my guides in Illustrator CS5 with the default keyboard shortcut "Alt+Ctrl+;", but with no result.
    When i edit this shortcut via the 'Edit/Keyboard Shortcuts...' menu, and type in the same keystroke combination for that command - so again "Alt+Ctrl+;" for "Lock Guides' - the shortcut changes from "Alt+Ctrl+;" into "Alt+Ctrl+."
    This new "Alt+Ctrl+." shortcut is usable. Now the same 3 different keystrokes tabbed at the same time do lock and unlock the guides, but i'm left wondering why it is that i can't use the "Alt+Ctrl+;" combination.
    There now also seems to be no way around changing the new combination into the old one again.
    I hope someone can help.
    Thanks in advance,
    Johan

    Thanks Jacob. I can't seem to find a solution to my problem within the site you linked, but i'm still happy with it. Seems to be a great resource for answers.

  • File Lock - How to lock and unlock a file ? Can we do that for an FTP File?

    Hi All,
    I like to retrieve a file from the FTP server using Apache Commons Net libraries.
    for example if the file size is 20MB. When the file is in the progress of copying or transferring from the FTP server i need to lock the local file which is in our local directory so that no other process will use the same local file which is in the process of copying otherwise partially copied files will be used by another process.
    the file should be locked when it was in the progress of copying from the server. I have an automatic process which will access file objects at certain time and try to process the files.
    I like to know the simplest and easiest way to lock and unlock a file object locally which is trying to copy a file from the FTP server which is of huge size.
    And also i like to know how to lock and unlock a file in general?
    Thanks,
    J.Kathir

    we can set it read only only when it complete finishing the writing.
    can we able to make the file as read-only while transferring data to file.
    How to achieve it ? pls give me some sample code

  • Statement for Lock and Unlock an Oracle user (Urgent)

    Hi DBAs.
    I just want to know about the statement used for lock and unlock the Oracle user thru sysdba suer.
    Thanks
    Hassan

    Hey,
    SQL> alter user <USERNAME> account lock;
    and
    SQL> alter user <USERNAME> account unlock;
    Cheers,
    Marcello M.
    Sorry Justin, same answer........
    Message was edited by:
    Marcello M.

  • Why does auto brightness has a bug in iOS 7.1.1 . The brightness switches automatically to higher in bright places but not returns to lower brightness in dark places but when you lock and unlock it becomes normal

    Why does auto brightness has a bug in iOS 7.1.1 . The brightness switches automatically to higher in bright places but not returns to lower brightness in dark places but when you lock and unlock it becomes normal

    Hello,
    Same problem for me. Really a pain in the *** this bug ! Does Apple fixed it. I'm really suprised noone reports this problem  and apple does not adress this.
    Because of that, I cannot give it anymore to children because it hurts the view. Really a shame on the part of apple !
    Regards

Maybe you are looking for

  • Time Capsule won't connect to Arris Modem?

    I'm trying to connect my Time Capsule to an Arris Touchstone Telephony Modem. The modem works with my gf's Belkin router, and I can plug directly into the modem and get Internet access, but my Time Capsule will not work with the modem. The green ligh

  • How do I use a div as a spacer?

    If I put 6 divs next to each other and put wording in each they work fine in the desktop view but if I leave the left div blank to use as a spacer It will not work.  The other 5 move to the left.  I need to use the first and last divs as spacers.  I

  • Durations of clips are Randomly shifting - HELP

    I normally work in Final Cut Pro, and needed to do a piece in iMovie due to the fact I'm traveling and do not have FCP on the computer I'm working on. I've been building a cut out of still images, 3 different songs, fades, transitions, etc. and as I

  • Purchasing for client's customer

    Hi Experts, We have the following business scenario. Client (say company ABC) buying parts (raw matl/ bought/ Semifinished) to repair the customer (say CUST1) returned finished product on behalf of customer. These parts received by the client (ABC),

  • Need a File Parameter with Browse Functionality in ABAP

    Hi I Need a File Parameter with Browse Functionality in ABAP. Can anyone help me with logic. Regards, Sree