Locked controls on new tab after finishing event structure

Greetings All,
My first question for the forum. I found a few posts which had similar issues but I still can't seem to figure this one out.
This program creates a temperature profile and it's within a much larger program where I want the user to be able to cancel, continue, go back a step, etc. It all works fine until I leave the event structure loop and go to the verify tab. The user should be able to continue or cancel but the buttons will not press. I believe the event structure is locking the front panel but I turned off the lock for that case and still no go.
I've attached the LLB, please check it out. Any help will be most appreciated.
Regards
Using LabVIEW: 7.1.1, 8.5.1 & 2013
Attachments:
TempProfiler2.llb ‏575 KB

Hi,
The answer is almost in the question, just go to the event structure and disable the option "lock front panel until event completes"
Message Edité par TiTou le 06-30-2006 09:18 AM
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"
Attachments:
Clipboard01.png ‏435 KB

Similar Messages

Why am I unable to select within the URL bar of a new tab after opening a .pdf file in Firefox 4?

To repeat the problem:
1.) Open a .pdf file in Firefox 4
2.) Open a new tab by using the (+) tab button
3.) Try to select within the URL bar (unsuccessful)
I cannot seem to direct my browser to a new website in a new tab after viewing a .pdf file within the browser.

Restore your default toolbar by going to Customize - Restore Default Set. I just found it out myself.

"open a new tab" buttton on the toolbar does not insert new tab after current

I want the open a new tab button at the right end of the tab bar to open a new tab after the currently open tab the same way the browser does when the browser.tabs.insertRelatedAfterCurrent profile option is set to true.
This current behavior is VERY annoying as I always have many tabs open and then have to scroll all the way to the right of the tab bar and drag the new tab back to where I want it, which is always following the currently active tab.
Not sure if this was ever supported but if not I used to run Tabberwoky which no longer works and I've become quite fond of the feature and I need to make Firefox 8 do this.
Please tell me how, not that I can't or should do it some other way.
Thanks.

That did it! Sure saves me trying to figure out how to write an extension to do it but if there is a simple example similar to my request that the source code is available for so I can take a look at it to see how its done the link to it would be appreciated.
Thanks for the help!

How to add new tab after reason for rejection tab using tcode va01

Hello,
how to add new tab after reason for rejection tab using tcode va01.

Hi,
You can check this link...
Hope it will be helpful to you.
[https://forums.sdn.sap.com/click.jspa?searchID=23016273&messageID=6825861]
[http://www.sapdevelopment.co.uk/enhance/fexits.htm]
-Maharshi
Edited by: Maharshi Vyas on Mar 3, 2009 12:45 PM

How add new tab after reason for rejection tab using tcode va01

Hello,
How to add new tab after Reason for Rejection tab using tranzaction code VA01.
pls suggest solution.

I don't think you can add a tab after reason for rejection tab. There are custom tab, which you can use for your convenient, given by SAP. You can look into the below details:
Program : SAPMV45A
Screen: 8459(Item) and 8309(Header).
Kuntal.

Lost ability to open new tab after tonight's update

I'm using Firefox 19, it got updated automatically tonight, and I've lost the + sign that allows me open a new tab. If I restart with add-ons disable, it returns but if I disable (in normal mode) add-ons individually to isolate the add-on causing the problem, the + doesn't return, even with all add-ons disabled. I'm sick of having to re-download FF every time there's an update.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Can't open bookmarks in a new tab after changing "browser.tabsinsertRelatedAfterCurrent" - even after changing it back.

I changed "browser.tabsinsertRelatedAfterCurrent" in about:config, and then changed it back after it didn't do what I had hoped it would do. The next time I tried to open a bookmark '''from the menu''' (not the little bookmarks button thing), nothing happens when I select "Open in a New Tab."
EDIT:
Bah, I couldn't take it and just did a restore.

see Tabs configuration, extracted from About:config entries
* http://www.mvps.org/dmcritchie/firefox/tabs_config.htm
and check out (remove spaces)
*browser.tabs.loadBookmarksInBackground
*browser.tabs.loadInBackground
*browser.search.openintab
More information on Tabs
Tabs configuration, extracted from About:config entries - MozillaZine Knowledge Base
*http://dmcritchie.mvps.org/firefox/tabs_config.htm
Tabbed Browsing in Firefox
*http://dmcritchie.mvps.org/firefox/tabs.htm
001 Tab Capacity Test
*http://dmcritchie.mvps.org/firefox/tab_capacity/001_with_underscore.htm##

Firefox start like it has just installed (checks add-ones and open whats new tab) after every windows restart

i installed the 6.0.2 recently i am not really like this it started to be annoying every time i start firefox after reboot it start checking add-ones capability and open what's new tab as if i just installed it

i solved it by deleting user.js file it works fine now

I can't open links in a new tab after the latest update

On certain websites where links open automatically in a new tab, such as Gmail etc, the tabs are empty and all of them have this strange address in the address field:
jar:file:///C:/Program%20Files/Mozilla%20Firefox/omni.ja!/chrome/browser/content/browser/newtab/newTab.xul
On Gmail not a single link works properly, all the links from the black bar, (Documents, Calendar etc...) and links in emails, they are always opened like this. It never happened to me in previous versions of Firefox.
I will be grateful for any help..
P.S. I don't have the Ask.com toolbar installed and never had..

hello, can you try resetting firefox in help > troubleshooting information? this will restore all preferences to the default but keep your bookmarks & passwords
[[Reset Firefox – easily fix most problems]]

Firefox Will not open a link in a new tab after I right click and then click on open link in new tab

When I right click A bunch of new options pop up and firfox will not open links in new tabs. Safe mode did nothing.

What do you mean with ''A bunch of new options pop up"''?
Can you open a new tab by clicking the plus button on the Tab bar?
Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/

How to open a new tab after current browsing session.

I used to use new tab king, and when I opened a new tab, it would always open the new tab to the very right of my session, out of the way and not somewhere randomly in the middle. However, I wanted my restored windows to open where I had closed them in my session. I have since changed to use new tab plus instead, and it worked that same way before, but since I updated to firefox 26, it seems to have reset that option (as well as others), it opens in the middle of the session now instead of the end.

I'm not sure what you mean by the middle of the ''session''.
Do you mean the middle of the tab bar in the current window? There is a setting for whether to open a link in a new tab adjacent to the page where you clicked the link or always at the end of the tab bar. If that's what you mean, here's how you can switch it:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''tabs''' and pause while the list is filtered
(3) Double-click the '''browser.tabs.insertRelatedAfterCurrent''' preference to switch it from true to false.
But I'm not sure that's what you meant... also, extensions may override Firefox's built-in behaviors with their own tab settings.

WHY IS GOOGLE NOW SHOWING UP IN MY NEW TABS AFTER THE UPDATE?? I AM FURIOUS

As a default, the new tabs screen should be blank, just like it always was.
I do not want a work around, or to have to mess with this.
I DO NOT want to see google, or any other product, showing up by default when i open a new tab.
This feels like the Microsoft strong arm tactics of the late 1990s. If I want to use google I will...BUT I DO NOT WANT IT FORCED ON ME!!! I trusted Firefox and allowed their updates and today they abused my trust by trying to shove products down my throat. I am furious.
Google seems to be the new evil empire, just like Microsoft used to be....
"MEET THE NEW BOSS, SAME AS THE OLD BOSS".
It looks like it is time to find a new browser, it looks like Firefox has sold out to Google, this is sad day.
I do not want a work around, I want new tabs and windows blank by default.
I hope this is fixed in the next day or so, otherwise I switch to the new browser my friend told me I should be using anyway.... JUST LIKE WHEN I LEFT INTERNET EXPLORER LONG AGO.... AND I NEVER LOOKED BACK and I have never opened IE again.
Please don't make me reboot my whole system and clean it all out....
I would rather stick with Firefox, but you need to fix this. I need to be able to trust you.

OK, so I tried the instructions again... and maybe I can
help someone else who comes along by explaining a different way.
1) open a new tab in Foxfire like you always do.
2) copy/paste, or type the phrase about:config in where you normally type a website's name. I will separate it to make it clear what need to be entered.
about:config
Press enter.
3)An error looking screen will come up, read it,
and then click on the button that says " I'll be careful, I promise ".
4)A screen will open up with a long list of phrases starting with...
accessibility.accesskeycausesactivation
accessibility.blockautorefresh
accessibility.browsewithcaret;false
you need to scroll all the way down this list until you see
browser.newtab.url
Highlight those words and double click it.
A box will open saying "Enter String Value"
5)What I did is- delete the words where you are
supposed to type something, leaving it empty,
click OK... and close that tab.
6)Now when I open a new tab it is blank, just like it should be.
6)I guess you can also type in your favorite
web site into the box and click OK and your favorite
website will come up when you open a new tab, but
i like it blank, it is faster.... and I can move along.
I am still not happy that Mozilla is allowing Google to
do what Microsoft was doing back in the late 1990s,
back when Microsoft tried forcing everyone to use
Internet Explorer by making it the default.... and the
mad people angry..... and the back lash against Microsoft
is still being felt today, so I don't know why Google would
try the same strong oar default tactics.... but then again,
history does tend to repeat itself, as it is today, as I am
again doing searches for a new web browser, juts like I
did back when I stopped using internet Explorer, but the
good news today is there are a lot more web browsers to choose from.
I hope Mozilla back pedals on this decision to make google
the default popup in new tabs, it just makes them look bad.
Thnak you for the help above and I hope my instruction can help someone else who is not all that tech savvy, but want to do this.
Respectfully,
Max

How add new tab after reason for rejection tab using tcode va01 using badi

I want to add new tab in va01 using badi. I search badi -> badi_sd_update_plval at the time of implementation it ask about access key.
which is suitable badi for va01 enhancement.
Any screen exit is available for this enhancement.

You need to implement BADI through SE19. Refer below link for details
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf4940e11d295df0000e82de14a/frameset.htm
Hope this helps..

Get the new value from an event structure block

Hello!
I'm using an event structure block. I've edited an event wich its event sources are an indicator an a variable (a real matrix). I want to get (to catch) the new value of the indicator and the variable from the frame placed at the left top, but the new value attribute is not a real not an integer.....is variant type. I have no idea what i have to do to catch this two values from here. Someone can post a simple example about it?
Thanks in advance!
Regards
Larson

If the terminal is INSIDE the event structure, you'll always get the new value. It will NOT be read until the event case executes, at which point the terminal contains the new value. (If the terminal is outside the event structure, and the wire goes inside the event structure, you'll get a stale value when the event for that terminal triggers. This is expected from the dataflow.)
Put the terminals inside the proper event case, you'll be fine!
LabVIEW Champion . Do more with less code and in less time .

Restore catalog to new pc after unexpected event (loss or damage to old pc)

I know there is a recommended way to use PSE catalog backup to transfer a catalog to a new pc
http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html
This is fine for when I have planned to move to a new pc.
But what about if the move to the new pc is unexpected (such as after a loss of the pc or the pc stops working)?
In this case, I would have an up-to-date backup of the old pc (because this is done automatically on a schedule), but would not have an up-to-date backup of the built in PSE catalog backup (because it is not automated).
How do I use my regular drive backup to restore the PSE catalog to the new PC, whilst preserving my albums?
Thanks

99jon wrote:
Well you obviously have another PC, so once you have everything linked up you can use the built-in back-up/restore to transfer to a mac.
My question is hypothetical. Before I invest a lot of time in creating albums and tags etc, I want to know that I can recover the information if an unexpected loss of the PC occurs.
If not! well you can't expect to transfer an automatic system backup from Windows to Mac OSX.
Well, that depends on how PSE organiser operates (something I am trying to understand).
With iTunes, for example, I can easily transfer the my automated backups between Windows & Mac, preserving the information held in the database (song ratings etc).
By the way, I am not talking about using an image based backup (Windows backup / Time Machine / Norton Ghost). I am talking about using my own automated folder-based backup that would include my photos folder and the folder containg the PSE catalog.

Locked controls on new tab after finishing event structure

Similar Messages

Maybe you are looking for