Locked ipad and forgot code

locked out of ipad

Recovery Mode Step by Step
1. Hold Sleep/Wake button down and slide to turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
On Computer
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. iPad Recovery Mode on computer screen
8. Select "Restore iPad"...
9. Select "Restore and Update"
10. Extracting Software.
11. Preparing iPad for restore.
12. Waiting for iPad.
13. Verifying iPad restore...
14.Restoring iPad software.
15. Verifying iPad software.
16. Verifying iPad Restore...
17. Restoring iPad firmware...
18. Your iPad is restored to factory settings; keep iPad connected to computer
19. Activate iPad
20. Enter Apple ID and Password
21. Continue
22. Welcome to Your New iPad
(a) Set up as new iPad   (b) Restore from this backup (select from list of backups)
23. Restore from this backup
24. Continue
25. Restoring iPad from backup
26. The settings of your iPad have been restore; keep iPad connected to computer
27. Syncing iPad (Step 1 to 5)
28. Preparing apps to sync
29. Copying 1 of 9
30. Sync apps, movies and music to iPad
31. Finishing syncing
32. Eject iPad

Similar Messages

  • 1st gen ipod grandaughter locked it and forgot code

    My granddaughter axed looked up a 1st gen ipod and forgot code

    - What is showing on the screen and what message did you get when you connected it to iTunes after placing the iPod in DFU mode. iTunes will tell you it found an iPod in DFU mode.  It can be trickiy to get it in DFU mode.
    - Placing ithe iPod in recovery mode, also tricky, will byspass the passcode and erase the iPod.  To place in recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    This program will also place the iPod n recovery mode.
    RecBoot: Easy Way to Put iPhone into Recovery Mode | Jaxov

  • I tried to log on my new ipad and forgot the password combination.  Due to several tries the ipad is locked up.  I remembered the password but my ipad is still disabled.  How do I get it going again?

    I tried to log on my new ipad and forgot the password combination.  Due to several tries the ipad is locked up.  I remembered the password but my ipad is still disabled.  How do I get it going again?

    You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
    iOS: Wrong passcode results in red disabled screen
    This will tell you how to restore
    iTunes: Backing up, updating or restoring iOS software
    If you cannot restore that way, you may have to use recovery mode
    iPad: Unable to update or restore

  • HT1212 My nine year old put a passcode on my ipad and forgot the code. What can I do?

    My nine year old put a passcode on my ipad and forgot the code. What can I do?

    Connect it to the computer you sync with and Restore it in iTunes from your backup.

  • How to reactivated my ipad air forgot code, how to reactivated my ipad air forgot code

    how to reactivated my ipad air forgot code, how to reactivated my ipad air f
    Please help

    You will have to restore your iPad. If you never synced with iTunes or do not have access to a computer, you may have to put the iPad in recovery mode.
    iOS: Forgotten passcode or device disabled after ... - Support - Apple
    These instructions refer to a forgotten passcode. Thanks to GB for clarification
    Message was edited by: nbar

  • HT5188 I have 50 iPads and 50 codes, but I am not able to install the app on the last ipad.  One code in the spreadsheet says it's already been used but shows no serial number or device name.

    I have 50 iPads and 50 codes, but I am not able to install the app on the last ipad using Apple Configurator.  One code in the spreadsheet says it's already been used but shows no serial number or device name.

    Hi mafiose15,
    Thanks for visiting Apple Support Communities.
    Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    You can find the instructions in this article:
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    All the best,
    Jeremy

  • One of the my kids put a 4digit lock code on my ipad and forgot what the number was

    how do i unlock my ipad since we dont knw our 4 digit passcode

    If you don't know the passcode then you will need to connect the iPad to the computer that you normally sync to and you should then be able to reset the iPad and re-sync your content to it (or possibly restore from your backup) : http://support.apple.com/kb/HT1212 - you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808

  • My granddaughter put a pass code in her ipad and forgot it. how do you fix this?

    My granddaughter put a pass code in her ipad2 and forgot what it was. How do you fix this?

    If she's forgotten the passcode to unlock the iPad then she will need to connect the iPad to the computer that she normally syncs to and she should then be able to reset the iPad and restore/re-sync her content to it (http://support.apple.com/kb/HT1212) - she may need to put the iPad into recovery mode in order to be able to reset it : http://support.apple.com/kb/ht1808
    If you do it via a different computer then :
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

  • I have an ipad and forgot the password. I tried to many times and it disabled on me. How do I get back into my ipad without using iTunes and without losing all my saved items.

    I have an ipad 2 WiFi. I was in the hospital having surgery and forgot my password. I tried several times but couldn't get it. I ended up disabling my ipad. There are important pics n notes in there that I need. How can I get back into it without using iTunes (because I bought it second hand, off ebay) and without losing all my saved items. Please help me!

    If it's disabled then it's too late to copy any content off it or to take a new backup, you will have to reset it back to factory defaults by connecting it to a computer's iTunes : Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
    Have you been backing up to the cloud ? If you have then after resetting it back to factory defaults you can restore to that backup : Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
    If you bought it second hand then had the previous user removed their account from Settings > iCloud (and had Find My iPad enabled) on it ? If not and the iPad is on iOS 7+ then you will have to contact the previous owner to reactivate the iPad after resetting it : Find My iPhone Activation Lock: Removing a device from a previous owner’s account - Apple Support

  • I just bought ipad and forgot password

    I bought an ipad air and forgot password. I have only used youtube so far nothing else. Please help

    Force iPad into Recovery Mode. Follow step 1 to 6 very closely.
    http://support.apple.com/kb/HT1808
    Note: You may have to repeat the above a few times.

  • I pass code locked my ipad and forgot the code.

    can i reset it on my own without taking it to an apple dealer?

    Yes.  Here's what you should do:
    http://support.apple.com/kb/HT1212

  • I put a restrictions pass code on my iPad and forgot the password. I tried to reset it to factory settings but that means I lose all my purchases and I don't wanna lose $ 25 worth of purchases. I tried restoring it but brings back restrictions code....

    How do I get rid of the restrictions pass code but keep my apps?

    You won't lose purchases. They can be downloaded to your iTunes library on your computer and backed up.
    You can also redownload your purchases directly from your iPad after the restore by signing into the iTunes and App stores with your Apple ID:
    Open iTunes Store app > Purchased
    Open App Store app > Purchased

  • HT4623 my granddaughter has disable her ipad and forgot her pass code had do i get the ipad back to normal and put in  another passscode

    how do i get a ipad that has been disable

    Force iPad into Recovery Mode. Follow step 1 to 5 very closely.
    http://support.apple.com/kb/HT1808
    Note: You may have to repeat the above a few times.

  • Locked iphone and forgot password how can I get it unlocked without having to reset my phone and lose everything?

    My boyfriend changed his pass code on his iPhone 5 and does not remember it. He's tried every possible code and now his phone is disabled and says to connect to itunes. I'm wondering if there's some where we can go take it to to get the password off without having to reset the whole phone and loseall all our pictures. Any info please I'd greatly appreciate it. I've called our carrier company and  I can't do anything but referred me to apple.

    If this iPhone has previously been synced to a computer you can connect to that computer which will unlock it.
    If you have not done so there is no way to use it without Restoring it and losing your information.

  • We'll I restarted my iPod because I was locked out and forgot my password but I didn't mean to erase all the data and now I can't play the games I love since I can't use my old gamecenter account...can someone please help

    Mhm,We'll I have worked 3 months to get a good gamecenter account but it just goes away? Someone please help I'm really annoyed

    I know how to but it doesn't lets go back to my old name it says it was taken

Maybe you are looking for

  • Ejects blank CD-R's after about 15 seconds

    My drive appears to be in perfect working condition, as other Cds are accepted as well as blank DVD's, and also the Verbatim CD-R's I just bought work fine as well because they are accepted by my boyfriend's computer, which is a mac bought around the

  • Merge to panorama not finishing

    I'm using CS5 to build panoramas.  When I merge 5 raw files photoshop goes through all the motions, ordering  and matching the images, but when it is just about done, and the message says building masks, the image just pops up with no blending or mas

  • OS 10.8.4 failed

    My new macbook won't open and gives me the message, "OS 10 has unexpectedly failed to open." [1] should I reinstall the OS and [2] if I do, will I lose the bookmarks and email addresses?

  • Trying to cut a specific size out of an image

    Hello, I don't use photoshop very often so usually I end up asking somewhere like here when I need to do something specific. I need to cut a section out of an image in a predetermined aspect ratio e.g. I want to be able to zoom into the image at any

  • No Wireless

    I have a WRT54GL.  I can connect my computers using ethernet ports.  But my laptop will not recognize the wireless signal anymore.  I have linked with other WIFI networks without a problem.  Do I have a bad router?