Locked items appearing in MD04

Hi everyone,
When I run md04, locked items are appearing in the Requirements List. Someone can explain why? Is that normal?
What I can do to hide this items from MD04?
Thanks!

yes this is design that locked POs are still taken into account by MRP and MD04.
Locks are short term solutions to clarify things and restrict further processing for a little while, but not meant to be used like deletion indicator for long term.
explained in help.sap.com
http://help.sap.com/erp2005_ehp_05/helpdata/en/4a/5c69c8937e1cffe10000000a421937/frameset.htm
Held purchase requisitions are not MRP relevant. Held purchase orders are MRP relevant.
Edited by: Jürgen L. on Aug 8, 2011 5:19 PM

Similar Messages

Should Third party order items appear in mD04

Dear experts,
We create third party orders where material is directly shipped to our customer from our vendors, material does not come to our inventory, why such orders appear in MD04 , not only orders the PO created for such delivery also appears, we use planning strategy 40 for the material.
I will appreciate If any one can explain why such orders should appear in MD04 and affect planning.
Thanks in advance.
Anand Tripathi

They should not be, self answered

Sales order does not appear in MD04

Hello,
One of my sales order is not appearing in MD04. I found out that in the sales order, the requirment type is missing.Is this could be te resaon for sales order not to appear in MD04.
2nd question) why requiremment type is not there in sales order. In my case, there is no entry in the item cat and mrp type table but in the strategy group in material master, the requirment type exists. so why the system is not showing requirment type in sales order by picking it up from the strategy group. in the item cat +mrp type table, the source is kept as "0", which means the system should pick the requirment type from strategy group . so why it is not picking if it is defined in straetegy group ?/
Question 3) or is it that the sales orders appear in MD04 only after MRP run but then why other sales orders are apearing before MRP run.
regards
sachin

Hi sachin,
what planning strategy group is your are using.
I assume plan stg grop is 20.
Normal settings for 20 Paln stg grop in material master.
1.Item category group (such as NORM) on the Sales Organization screen
2. Set Plan stg = 20 at Mrp View.
Requierment type fo customer requirement = KE assigned for planning strategy 20 at customizing.
For 20 plg stg requiremnt type is customer requirement type only.
with above settingsif create sale order it will appear at Md04 before MRP run.
u can see the customer requ type at "procurement tab "of sale order.
For planning of material u have to maintain valid MRP type at Mrop view.
i am not clear about ur second question.
please comeback
Regards
Pradeep

Sales order not appearing in MD04

Hi,
Sales order is not appearing in MD04 screen some times. I tried with different MRP types and Different strategies, But I could not found the solution.
Thanks in advance

Hi Bhagavan
1) Please check the Item Ctaegory of the sales order that you created
Is it TAN (or) TAS , Please check & revert
2)Also, check the material & plant which the sales Order is created, any MRP AREAS that you have in your Plant ?
3)In MD04, Check the following
Material :
MRP AREA :
Plant :
Check that you sleeted all the above points Correctly ?
Revert for any other info.
Regards
BRSR

How to block deliveries appearing in MD04?

Hello All,
How to block deliveris appearing in MD04?
We want to block deliveries of certain Sales order (ZXY) /Storage location combination (ABCD)
i.e. deliveries of Order type ZXY, storage location ABCD should not appear in MD04.
thanks

Hi,
You can try this way. In the material master enter checking groups differently for each storage location(MRP3 view) and in Availability check control(OVZ9Transaction code) do not include the deliveries .This way you can avoid deliveries to be included in the check or use the user exit. And If you want to switch of the deliveries assigned to particular order type, just assign a different delivery type to those order type and determine different delivery item category(0184 Transaction) and in the delivery otem category configuration(0vlp--zerovlp is the transaction), there is a check box aVCHECK OFF ,JUST TICK THAT FILED. Kindly please let me know If you need any more Information on this.
Regards,
Ram Pedarla
Edited by: RamPedarla on Mar 10, 2010 11:53 AM

Lock items in a bin

How do I lock items in a bin so that sequences can't be launched, clips cannot be bent, folded or mutilated? Ideally, can I lock a bin up so it can't even be opened? (assistant editor is going to capture a bunch of tapes for me and I want to eliminate risk of anything being disturbed) thanks.

Sorry... sarcasm caused by frustration at my current edit job.
I've never come accross, or heard of any locking feature in the Browser of FCP. I think it would be unneccessary... well, seeing as you brought it up, i can kind of understand why it might be handy for a short-term solution to keeping Bins safe... but...
I think the safest way is as Jim said, just start a new project for the assistant and get all the new tapes captured to it and then copy them over into your master project.
all the best
J

Vendor open items appearing in FBl1 but same documents not appearing F-44.

Hi,
Vendor open items appearing in FBl1 but same documents not appearing F-44.
Please help me in this.
Thanks
GP

Hi,
F-44 is used for clearing vendor - header data. Check if there are both debit and credit entries for the vendor and if it exists then clear using F-44. Check the entries correctly in FBL1.
regards,
radhika

Old deleted items appearing again in trash

Hello,
I have been reviewing my trash of late and I have noticed that items that I have previously deleted and subsequently emptied from the Trasn Car and re-appearing. Yesterday my trash was empty and today there are items appearing as having been deleted on 17th December???
Anyone know why this is?
Thanks

Have you tried using the Secure Empty Trash option?
There may be a solution in this article: What to do when the Trash won’t empty
Mountain Lion (10.8.1)
Use Software Update or the OS 10.8.4 combo update to update your OS. Also, update everything SU has to offer for your computer. When done, repair permissions and restart your computer.

Sales orders not appearing in MD04

Hi,
Certain sales orders are not appearing in MD04. They belong to a particular sales organization. What could be the reason and how to resolve such thing.
regards
sachin

sachin arora wrote:>
> Hi,
>
> Certain sales orders are not appearing in MD04. They belong to a particular sales organization. What could be the reason and how to resolve such thing.
>
> regards
>
> sachin
Hi Sachin,
MD04 is the stock requirement listing.
Normally it would not list general sales order that is Make to STOCK scenarion. It would not list those sales order as that requirment is taken care by PIR (planned independant Requirment).
However in scenarios like MTO (Make to Order) or Plan to assemble to name a few. MD04 will list the sales order.
For that you need to change the STRATEGY GROUP in Material Master to Planning with Asembly or Make to Order in MRP3 Tab.
Once you save the sales order for such a material it will get listed in MD04.
Hope it helps.
Thanks & Regards
Abhishek Swarup

Is there a way of displaying the various item in my Downloads folder as icons arranged in order of Date Created, such that the most recent items appear at the bottom, rather than the top?

Is there a way of displaying the various item in my Downloads folder as icons arranged in order of Date Created, such that the most recent items appear at the bottom, rather than the top? I know this can be done when they are displayed as a list, but I want icons!

Hi geezer,
when you open your 'Downloads' folder choose 'View' in the Menu bar and choose:
'as List'
'Show View Options'
In 'View options' window you tick:
'Always open in list view'
'Date Modified', or
'Date created'
Now inside the 'Downloads' folder click on 'Date Created' (or 'Date Modified')
column to get items alined from oldest to newest date (or reverse)…

How to make a new line item appear in a sales order in VA01 transaction?

Dear All,
I am trying to create a SO with single line item with quantity 100.
Upon hitting the 'Enter' key, if the available quantity is less than the requested quantity (say 20), it takes me to an availabilty control screen which has a push-button 'One-time delivery' on the application tool bar.
Upon clicking on this button, it takes me back to the main screen of VA01 where I currently see only one line item with quantity 100 and confirmed quantity 20.
My requirement here is to make two line items appear, one with quantity 20 and the other with quantity 80, once I navigate back to the main screen of VA01 after clicking on the push-button 'One-time delivery'.
Please provide me your valuable inputs. Any kind of help is highly appreciated.
Useful answers never go unrewarded.
Regards,
Sreekanth Reddy B.

Hi Sreekanth ,
creating line items based on the confirmation qty can be done thru config, not thru ABAP,standard SAP will gives you options to create a new line item for unconfirmed qtys.
check with ur functional consultant or try to post in SD /APO forums.
regards
Prabhu

How can I get rid of "locked items" in Trash?

I am deleting old Time Machine files from my external drive, using my MacBook Pro (2007) to do it. I've been doing this for several weeks, but now when I'm in Trash and click "Empty Securely" I get this message: "There are some locked items in Trash. Do you want to remove all the items, including the locked ones, or just the unlocked items?" Regardless of whether I click on "Remove unlocked items" or "Remove all items", the process stops almost immediately and the Trash remains full. What might be the "locked items" and how can I get rid of them?

You might try restarting and then try to empty the Trash.
If that doesn't work, see -> Solving Trash Problems.
Clinton

How to clear Noted Items appearing in FBL5N

HI All,
I have an issue as below. One of our customer posted one noted item, later he created a down payment transaction.
While doing this down payment, he cleared the noted item.
Now the noted item appears as cleared item and down payment made is appearing as open item in transaction FBL5N.
Here I would like to suggest the customer to revese the down payment transaction and post a customer Invoice and clear that customer invoice by down payment transaction.
But here my question is if we do reverse the down payment transaction posted initially, then noted item will appear as open item.
Now, How to clear the open item.
Awaiting for your responses.
Thanks
Prasad

Dear prasad naga,
I want to clarify your question and i will give you my answer depending on your question understanding.
Firstly you want to clear the noted item (down payment request) with the in voice or to be cleared anyway.
So when you create the down payment you select the noted item to create new down payment while the noted item has no financial effect, secondly when yu create the invoice and clear down payment with it it will clear down payment (noted item was cleared depending on creating the down payment on it). So where is the problem??
I hope it helps you
Best Regards
Hussein

Sales Order deleted but Demand still appear on MD04

Dear Master , anyone know for a Sales Order been deleted but the Demand still appear on MD04, I even tried as below but still no solution
- ran report SDRQCR21 in SE38 that cleared up the demand.
- Try rerunning MRP with planning mode 3
- Mark delivery complete for the order.and make rejection in the sales order by entering the reason.
Thank you.

1) Please check any Open delivery is exist for the order, if yes delete the Delivery
2) Close the order by order rejection
3) run SDRQCR21 in SE38 with data transfer , planning file entry and processing per material tick
4) This will remove the planning file entry and demand and run MRP
5) If problem still exist , then raise a Question to SAP with the help of Basis

SchAgr not appear in MD04

Hi,
I have a user, who created a Sales SchAgr but it was not appear in MD04. This is only happened to a few newly created material. What would be missing?
Thanks.

Hi Jan,
In VA31 you will create schdulling agrement,in MD04 you can see the requirement transfor means when the order material is not available system will transfor the requirement to MD04.
In your case may be the material is avilable so for that reason it will not comming in to MD04.

Locked items appearing in MD04

Similar Messages

Maybe you are looking for