Locked items in transaction LQ02

Hi all,
I'm trying to execute a posting change for items in quality but when I run the transaction LQ02, the status of the materials in the list is 'Locked Item'. And with this status, I can't continue with my transaction because I cannot select the line items. I tried using the Block/Unblock quants transaction LS07 but nothing changes.
Any advice on this issue will be greatly appreciated.
Thank you very much.

Once I posted this I saw "More like this" on this topic. the answer was right there:
As you select "Empty secured trash" hold down the Option key. I kept holding it down (don't know if that was necessary) until it deleted several files (got past where it usually kicked me out). Now it's still deleting files!

Similar Messages

Lock items in a bin

How do I lock items in a bin so that sequences can't be launched, clips cannot be bent, folded or mutilated? Ideally, can I lock a bin up so it can't even be opened? (assistant editor is going to capture a bunch of tapes for me and I want to eliminate risk of anything being disturbed) thanks.

Sorry... sarcasm caused by frustration at my current edit job.
I've never come accross, or heard of any locking feature in the Browser of FCP. I think it would be unneccessary... well, seeing as you brought it up, i can kind of understand why it might be handy for a short-term solution to keeping Bins safe... but...
I think the safest way is as Jim said, just start a new project for the assistant and get all the new tapes captured to it and then copy them over into your master project.
all the best
J

Cleared items still shows as open items in transaction FBL3N

Dear All,
We have an issue with respect to cleared items still shows as open items in transaction FBL3N.
Few documents has been posted and cleared, but still those line items still shows as open items. We had this problem only for few line items.
For other line items this clearing process is working properly without any issue.
Issue:
1. Documnet has been posted on 15.08.2209 and the same document has been cleared on 12.03.2010, but this document still shows as open item only....
Looking forward your response / suggestions to resolve this issue.
Thanks in advance
Regards,
Prasad

Hi Prasad,
You have the following ways to find out the reason:-
1. Check your selection criteria in FBL3N, if you are selecting open items as on 15.08.2009, then they will still show open items..
2. Check in table BSIS and BSAS and check where the documents are appearing.If they are cleared, they all should be appearing in BSAS.
This is standard SAP and most probably it has got to do with dates...
Regards,
SAPFICO

How can I get rid of "locked items" in Trash?

I am deleting old Time Machine files from my external drive, using my MacBook Pro (2007) to do it. I've been doing this for several weeks, but now when I'm in Trash and click "Empty Securely" I get this message: "There are some locked items in Trash. Do you want to remove all the items, including the locked ones, or just the unlocked items?" Regardless of whether I click on "Remove unlocked items" or "Remove all items", the process stops almost immediately and the Trash remains full. What might be the "locked items" and how can I get rid of them?

You might try restarting and then try to empty the Trash.
If that doesn't work, see -> Solving Trash Problems.
Clinton

Line Item and Transaction Figures

Hi experts,
What is the difference between line items and transaction figures ?
I have gone through a document which specifies for Line items GL AR AP, it picks data respectively frm tables BSEG/BKPF, BSAD/BSID, BSAK/BSIK and for transaction figures GLT0/GLFUNCT, KNC1/KNC3, LFC1/LFC3.
What data 0FI_XX_6 fetches into BI when compared with 0FI_XX_4 ?
Please clarify.
Regards,
Bhadri M.

Hi,
What are Transaction Figures :
Transaction figures are the sums of line items on the debit or credit side. The balance is the
difference between the debit and the credit transaction figure.
What is line items :
Line items are document items that were posted to a specific account. In contrast to a document item a line item only contains the information from the document that is relevant from the account view.
You can display the following line items:
Open items Cleared items Noted items Parked items Items with special G/L transactions (in Accounts Receivable and Accounts Payable)
Items with customer or vendor items (in Accounts Receivable and Accounts Payable)
You can display the line items for the following account types:
Customer accounts
Vendor accounts
G/L accounts
Point No 1:
0FI_XX_6 : Transaction Figures:
http://help.sap.com/saphelp_nw04/helpdata/en/41/4b73415fb9157de10000000a155106/content.htm
0FI_XX_4: Line-Item
http://help.sap.com/saphelp_bw33/helpdata/en/af/16533bbb15b762e10000000a114084/content.htm
Regards
Ram.
Edited by: Ramakanth Deepak Gandepalli on Dec 22, 2009 10:46 AM

I have a locked item in my trash, how can I get rid of it

I have a locked Item in my trash, how do I get rid of it?

Hold down the option key while emptying the Trash.

The requested object is locked by another transaction

Hi All,
I got a problem while loading data from an ODS to another ODS, it shows 450 records but request is red, it says
'The requested object is locked by another transaction'
Message no. MC602
Diagnosis
A lock requested by calling an ENQUEUE function module cannot be provided because the object in question has already been locked by its own transaction.
Technical Information: The C_ENQUEUE routine returns the following values:
COLLISION_OBJECT = ERSMONFACT
COLLISION_UNAME = SINGH
System response
The ENQUEUE function module triggers an appropriate exception. If this exception was not intercepted by the application program, it leads automatically to the active SAP transaction being cancelled.
Procedure
Once the ENQUEUE function module is called, the application program should intercept this exception and react to it appropriately.
I tried SM12 but there is no lock entry, can u suggest some thing?
Regards,

Hello,
here your dso seems to be lock as some read and write opertaion is happening at the time u r running the dtp.
Here two things to look :
1.Check the error that ur getting while running a dtp the process monitor etc try to find the request id which has locked the dso . Copy that request id go to t-code RSRQ see whats this request who is user,target etc..contact user for cancelling the job if it has been stuck for long long time. Copy the JOB ID from RSRQ for that rquest go to SM37 give the date as there in RSRQ and kill the job
2.GO to SM12 try to search the object there and remove the lock.
Thanks,
Deepak

Error in doing in Commitment item Financial Transaction

Hi
Iam facing a problem while doing GR/IR because GR/IR gl account has been assigned to commitment item category of 60 instead of 40. But most of the PO's iam able to do the GR/IR apart from a handfull.That is confusing me.If its a configuration error then it should not allow all POs .I have searched and posted in the forum regarding the change of commitment item financial transaction change but i been adviced that i cannot change that once been posted into it. Plz guide me on this matter
Regards
Vipin

Hi osvaldo
The reversing is where the problem arises.There are lot many postings happening in an hour and the count is increasing. It will be hard for me to reverse the whole and morover my user is so stubborn that he is not allowing me to create a new commitment item for GR/IR. i got a commitement item which is been assigned to GR /IR item and vendor account of FT 60. i want to change the GR/IR item to FT 40 and not for the Vendor item. I have no other optionleft to create a new commitment item for GR/IR.Thts where iam stuck with. It was a mistake while entering the rule in FM Derive
Regards
Vipin

How do you remove a locked item in the trash bin

how do you remove a locked item in the trash bin

Hold down the option key while emtying the trash.
Please detail all you have done to resolve your issue. Need this information so that the users can avoid the "been there, done that" scenario type responses. This is to avoid repeating the troubleshooting you may have already tried. Thank you.

Locking items on a slide

Hello,
Question. What is the purpose of being able to lock items on
a slide? Why would this be helpful?
thanks,
Helen

Hi Helen
Imagine you are composing something where if one image or
caption were inadvertently moved a smidge, it would look odd. In
this case, it's a wonderful thing to be able to lock objects on a
slide. This prevents accidentally clicking and moving them when you
didn't intend to.
Just a thought... Rick

Can I lock items at favorites bar?

It happened to me a few times that I accidentally dragged bookmarks from the Favorites Bar while opening Safari. I opened it and wanted to drag the browser window to a location and accidentally dragged such a bookmark from the Favorites Bar, resulting in that 'poof' cloud and I had to see which bookmark I dragged out of it to add it again.
Isn't there some way to lock bookmarks from the Favorites Bar? Just like I can lock items from the Dock? Some Terminal command?

to lock the dock run the following commands from the terminal
defaults write com.apple.dock contents-immutable -bool true
killall Dock
Make sure you press enter after "killall Dock"
To unlock it change "true" to "false" in the above. Also, I believe Onyx http://www.titanium.free.fr/pgs2/english/download.html
provides a UI way to do it if you are uncomfortable with using the terminal.

Is There A Way To LOCK Items To The Dock (to prevent accidental drag off)

Is there a way to lock items to the dock to prevent accidentally dragging them off? Every now and then, I'll accidentally drag something I just meant to click (really, I click too hard while moving my mouse) and I'll see a POOF as the icon disappears... which means I have to dig for it in the finder and replace it. D'oh!

run the following terminal command
defaults write com.apple.dock contents-immutable -bool true; killall Dock
to unlock it change true to false in the command.

Error -2038: Record locked by another transaction / Internal error occured

Hi, sometimes when I'm trying to update a SO via DI API, I got this error -2038. The error message varies, either: "Internal error occured" or "Record locked by another transaction". Ffor 'record locked' error, the table/field names varies, eg.
[RDR1.ItemCode][line: 7]
[RDR12.TaxId8][line: 1]
[WTR1.ItemCode][line: 1]
[RDR1.ItemCode][line: 9]
[RDR1.ItemCode][line: 3]
[RDR12.TaxId2][line: 1]
[RDR12.CityS][line: 1]
Any idea what the problem might be? FYI I'm using PL41, and this DI calls are from a centralized 'handler' VB.NET program. I've also released the instantiated BO objects via System.Runtime.InteropServices.Marshal.ReleaseComObject() (http://support.microsoft.com/kb/317109)
Thanks.

David: what do you mean by 'S-User for the Marketplace'? I think I'm not an S-User, so I still can't login... How can I be an S-User?
Anyway, I'll close this question, even though it's not really solved. I can't find any other user updating the same document, but that -2038 errors still pop up.
Currently I'm using John's approach to retry whenever I got -2038. As long as it works and everybody's happy I guess...
Thanks everybody.

Why can't i empty my trash bin? it prompts me to dele ''all locked items'' or ''unlocked items''...when i click delete ''all''...it runs up to a total of approx 29000 items, yet it does not remove it securely or at all!

why can't i empty my trash bin? it prompts me to dele ''all locked items'' or ''unlocked items''...when i click delete ''all''...it runs up to a total of approx 29000 items, yet it does not remove it securely or at all! I am running OS X YOSEMITE

Trash – Empty When File is Locked or in Use
Try holding down the option button while trying to delete the Trash. If that doesn’t work, here is some more information.
Trash FAQ
Trash Permission Error
Trash Permission Error (2)
Trash Permission Error (3)

Locked items appearing in MD04

Hi everyone,
When I run md04, locked items are appearing in the Requirements List. Someone can explain why? Is that normal?
What I can do to hide this items from MD04?
Thanks!

yes this is design that locked POs are still taken into account by MRP and MD04.
Locks are short term solutions to clarify things and restrict further processing for a little while, but not meant to be used like deletion indicator for long term.
explained in help.sap.com
http://help.sap.com/erp2005_ehp_05/helpdata/en/4a/5c69c8937e1cffe10000000a421937/frameset.htm
Held purchase requisitions are not MRP relevant. Held purchase orders are MRP relevant.
Edited by: Jürgen L. on Aug 8, 2011 5:19 PM

Locked items in transaction LQ02

Similar Messages

Maybe you are looking for