Locked Keychain notes crash Keychain
Locked Keychain notes crash Keychain — serious trouble for me, as I have so much protected info there and only there. Notes that are not locked open just fine. Separately, but related, I've tried to set up so my Keychain is shared between my Mini and my MBA, but it has never worked. If it had, I might be able now to at least find my credit card info, etc., when I need it. Please help.
See attached images to help ID the OS app referenced and the applicable section of it.
Similar Messages
-
HP Pavilion Elite e91804 experiencing lock-ups and crashing after LWSEP
1. Product name and number: HP Pavilion Elite e91804
2. Operating system: Windows 7 64 bit
3. No error message (other than blue screen)
4. My most recent change was sending my computer in for the Limited Warranty Service Enhancement Program, and receiving a new motherboard.
Before I sent my computer in for the LWSEP I was experiencing lock-ups and crashes only when I was multi-tasking (playing video games, listening to music, and having tabs open in firefox).
So I sent my computer in for the LWSEP to receive a new motherboard to fix these crashes, however after receiving my computer from them, the lock-ups and crashing have not been fixed and, in fact, have gotten worse. My computer will now lock-up and crash whenever I attempt to stream anything, be that music, video, etc. I can still occasionally play video games, assuming that I am doing nothing else, and that my computer cooperates with me (not locking up), but this only happens about 1/3 of the time.
My main confusion is that sending my computer in was supposed to fix my problem, not make it worse. Any help would be greatly appreciated.1. Product name and number: HP Pavilion Elite e91804
2. Operating system: Windows 7 64 bit
3. No error message (other than blue screen)
4. My most recent change was sending my computer in for the Limited Warranty Service Enhancement Program, and receiving a new motherboard.
Before I sent my computer in for the LWSEP I was experiencing lock-ups and crashes only when I was multi-tasking (playing video games, listening to music, and having tabs open in firefox).
So I sent my computer in for the LWSEP to receive a new motherboard to fix these crashes, however after receiving my computer from them, the lock-ups and crashing have not been fixed and, in fact, have gotten worse. My computer will now lock-up and crash whenever I attempt to stream anything, be that music, video, etc. I can still occasionally play video games, assuming that I am doing nothing else, and that my computer cooperates with me (not locking up), but this only happens about 1/3 of the time.
My main confusion is that sending my computer in was supposed to fix my problem, not make it worse. Any help would be greatly appreciated. -
DW 8 locks up and crashes when I try to do anything
DW 8 locks up and crashes when I try to do anything to a
file. This started 2 days ago.
When I open a file, and I try to merge table rows, or change
the CSS of some text, or anything, DW 8 locks up and is "not
responding".
How do I fix this?Might have to do with the time change.
There is a document on Adobe that goes over what you have to
do, and it's
something do with removing a file, but I don't remember
which. -
Lots of hard locks and kernel crashes/oops ["SOLVED"-bad motherboard]
I have been experiencing a lot of hard locks and kernel crashes/oops(es?) lately. This computer has always had random freezes in both WinXP and Linux (various distributions -- including live cds).
Here is my latest crash (from dmesg):
PCI: setting IRQ 12 as level-triggered
PCI: Found IRQ 12 for device 0000:02:05.0
Bad pte = dfbdf272, process = ???, vm_flags = 3f3f, vaddr = b7e6d0ac
Pid: 1470, comm: load-modules.sh Not tainted 2.6.25-ARCH #1
[<c016e775>] handle_mm_fault+0x2c5/0x850
[<c011d0c9>] do_page_fault+0x2a9/0x790
[<c014169d>] hrtimer_start+0xdd/0x1e0
[<c0125a16>] hrtick_set+0xc6/0x140
[<c03053ef>] schedule+0x3af/0x850
[<c01437e5>] getnstimeofday+0x35/0xe0
[<c01419e8>] ktime_get+0x18/0x40
[<c0305a76>] preempt_schedule+0x56/0x70
[<c012386f>] wake_up_new_task+0x8f/0xd0
[<c0128643>] do_fork+0xd3/0x2b0
[<c011ce20>] do_page_fault+0x0/0x790
[<c0307d52>] error_code+0x72/0x78
[<c0300000>] cpu_init+0x220/0x29a
=======================
VM: killing process load-modules.sh
lshwd output:
00:00.0 Class 0600: Intel Corp.|82865G [Springdale-G] Chipset Host Bridge (intel-agp)
00:01.0 Class 0604: Intel Corp.|82865G/PE/P Processor to AGP Controller (unknown)
00:1d.0 Class 0c03: Intel Corp.|USB Controller (uhci_hcd)
00:1d.1 Class 0c03: Intel Corp.|USB Controller (uhci_hcd)
00:1d.2 Class 0c03: Intel Corp.|USB Controller (uhci_hcd)
00:1d.3 Class 0c03: Intel Corp.|82801EB USB EHCI Controller #2 (uhci_hcd)
00:1d.7 Class 0c03: Intel Corp.|USB Enhanced Controller (ehci-hcd)
00:1e.0 Class 0604: Intel Corp.|82820 815e (Camino 2) Chipset PCI (hw_random)
00:1f.0 Class 0601: Intel Corp.|82801EB ISA Bridge (LPC) (i810-tco)
00:1f.1 Class 0101: Intel Corp.|82801EB ICH5 IDE (ata_piix)
00:1f.2 Class 0101: Intel Corp.|82801EB ICH5 IDE (SATA) (ata_piix)
00:1f.3 Class 0c05: Intel Corp.|82801EB SMBus (i2c-i801)
01:00.0 Class 0300: nVidia Corp.|NV18 GeForce4 MX440 AGP 8x (nv)
02:05.0 Class 0401: Avance Logic Inc.|ALS4000 Audio Chipset (snd-als4000)
02:07.0 Class 0200: D-Link System Inc.|DFE 530 TX+ Fast Ethernet Adapter (8139too)
02:0a.0 Class 0c03: VIA Technologies Inc.|VT82C586B USB (uhci_hcd)
02:0a.1 Class 0c03: VIA Technologies Inc.|VT82C586B USB (uhci_hcd)
02:0a.2 Class 0c03: VIA Technologies Inc.|VT8235 USB Enhanced Controller (ehci-hcd)
relevant entry in grub's menu.lst:
# (0) Arch Linux-ARCH
title Arch Linux
root (hd0,0)
kernel /boot/vmlinuz26 root=/dev/sda1 ro nosmp noapic acpi=off pci=routeirq ide-legacy
initrd /boot/kernel26.img
I added nosmp and the other parameters at the install/rescue cd's suggestion. I tried using the microcode package (I have a P4 HT) as suggested by someone in another thread.
I've found that the freezes will happen at the beginning of heavy CPU or disk usage (such as compilation or pacman db parsing). The hd is not the original one from this system (it was a hand-me-down), so I don't think that's the problem. The video card is different and the RAM is new. The only components that are still around are:
P4 HT processor (2.60 ghz)
Albatron PX865PE II
Enermax power supply
Any ideas? It also says "bad eip value" when the system has kernel crashes (especially on boot).
Last edited by mrbug (2008-06-21 03:08:35)Latest message while mkinitcpio was running:
Linux agpgart interface v0.103
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.05 Tue Jan 22 19:36:58 PST 2008
BUG: unable to handle kernel paging request at 756e696c
IP: [<c018a137>] flush_old_exec+0x577/0x750
*pde = 00000000
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: nvidia(P) agpgart nfnetlink_queue nfnetlink nf_conntrack_ipv4 iptable_filter ip_tables xt_state nf_conntrack xt_NFQUEUE x_tables w83627hf hwmon_vid 8139too mii i2c_i801 i2c_core pcspkr shpchp pci_hotplug sg evdev thermal processor fan button battery ac snd_als4000 gameport snd_sb_common snd_opl3_lib snd_hwdep snd_ice1724 snd_ice17xx_ak4xxx snd_ac97_codec ac97_bus snd_ak4114 snd_pt2258 snd_i2c snd_ak4xxx_adda snd_mpu401_uart snd_rawmidi snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore e1000 rtc_cmos rtc_core rtc_lib ext3 jbd mbcache usbhid hid ff_memless usb_storage sr_mod cdrom sd_mod ehci_hcd uhci_hcd pata_acpi usbcore ata_piix ata_generic libata scsi_mod dock
Pid: 9173, comm: dirname Tainted: P (2.6.25-ARCH #1)
EIP: 0060:[<c018a137>] EFLAGS: 00210202 CPU: 0
EIP is at flush_old_exec+0x577/0x750
EAX: 756e696c EBX: 00000000 ECX: 00000500 EDX: df269004
ESI: de546c00 EDI: 00000000 EBP: df269080 ESP: de121da4
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process dirname (pid: 9173, ti=de120000 task=de546c00 task.ti=de120000)
Stack: 00000001 de694b00 00000000 df269000 df269004 de710504 de710000 de547134
6e726964 00656d61 c018a39d de121dd4 00000003 de18f878 c035ccb5 de18f840
c01b73be 00000080 00000001 c13d8ec0 dec77000 de694b00 c016421f 00000001
Call Trace:
[<c018a39d>] kernel_read+0x3d/0x60
[<c01b73be>] load_elf_binary+0x36e/0x1aa0
[<c016421f>] get_page_from_freelist+0x2cf/0x4d0
[<c01646ce>] __alloc_pages+0x5e/0x360
[<c0175705>] anon_vma_prepare+0x85/0xe0
[<c016eabd>] handle_mm_fault+0x60d/0x850
[<c016eacb>] handle_mm_fault+0x61b/0x850
[<c0184b45>] do_sync_read+0xd5/0x120
[<c016c60d>] vm_normal_page+0x1d/0x70
[<c016c60d>] vm_normal_page+0x1d/0x70
[<c016d479>] follow_page+0x119/0x1c0
[<c016edd1>] get_user_pages+0xd1/0x2f0
[<c01b7050>] load_elf_binary+0x0/0x1aa0
[<c01898ec>] search_binary_handler+0x15c/0x290
[<c018ab9c>] do_execve+0x21c/0x250
[<c01033c6>] sys_execve+0x46/0x80
[<c01050d8>] sysenter_past_esp+0x6d/0xa5
[<c0300000>] cpu_init+0x220/0x29a
=======================
Code: c3 04 89 e8 e8 eb d6 17 00 89 5c 24 10 bb ff ff ff ff 8b 54 24 10 83 c3 01 89 df c1 e7 05 8b 02 39 38 0f 86 11 01 00 00 8b 40 08 <8b> 34 98 85 f6 74 e0 c7 04 98 00 00 00 00 89 e8 e8 a4 d9 17 00
EIP: [<c018a137>] flush_old_exec+0x577/0x750 SS:ESP 0068:de121da4
---[ end trace 255f477a12072e9b ]---
note: dirname[9173] exited with preempt_count 1
BUG: unable to handle kernel paging request at 6f732e78
IP: [<c012b737>] put_files_struct+0x37/0xb0
*pde = 00000000
Oops: 0000 [#2] PREEMPT SMP
Modules linked in: nvidia(P) agpgart nfnetlink_queue nfnetlink nf_conntrack_ipv4 iptable_filter ip_tables xt_state nf_conntrack xt_NFQUEUE x_tables w83627hf hwmon_vid 8139too mii i2c_i801 i2c_core pcspkr shpchp pci_hotplug sg evdev thermal processor fan button battery ac snd_als4000 gameport snd_sb_common snd_opl3_lib snd_hwdep snd_ice1724 snd_ice17xx_ak4xxx snd_ac97_codec ac97_bus snd_ak4114 snd_pt2258 snd_i2c snd_ak4xxx_adda snd_mpu401_uart snd_rawmidi snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore e1000 rtc_cmos rtc_core rtc_lib ext3 jbd mbcache usbhid hid ff_memless usb_storage sr_mod cdrom sd_mod ehci_hcd uhci_hcd pata_acpi usbcore ata_piix ata_generic libata scsi_mod dock
Pid: 9173, comm: dirname Tainted: P D (2.6.25-ARCH #1)
EIP: 0060:[<c012b737>] EFLAGS: 00210202 CPU: 0
EIP is at put_files_struct+0x37/0xb0
EAX: 6f732e78 EBX: 00000000 ECX: c1407460 EDX: 00000303
ESI: de546c00 EDI: df399840 EBP: 00200206 ESP: de121bb8
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process dirname (pid: 9173, ti=de120000 task=de546c00 task.ti=de120000)
Stack: df269000 0000000b de546c00 c035c5ec 00200206 c012ce7a c036075c de546e11
000023d5 00000001 00000000 00000001 00200206 c0308c6c c0360510 de121c00
de121d6c 00000000 c035c5ec 00200206 c0106e28 de5d5e34 00000000 1f901000
Call Trace:
[<c012ce7a>] do_exit+0x16a/0x6a0
[<c0106e28>] die+0x1b8/0x1c0
[<c011cfd1>] do_page_fault+0x1b1/0x790
[<c018cc23>] do_lookup+0xf3/0x1b0
[<c0197ff3>] __d_lookup+0x143/0x160
[<c011e6cf>] kunmap_atomic+0x3f/0xe0
[<c015e059>] file_read_actor+0xd9/0xf0
[<c0160e3b>] generic_file_aio_read+0x59b/0x630
[<c019cd83>] mntput_no_expire+0x13/0x70
[<c017ebf9>] add_partial+0x19/0x70
[<c0171309>] remove_vma+0x39/0x50
[<c017fd43>] __slab_free+0xd3/0x360
[<c017ebf9>] add_partial+0x19/0x70
[<c0189d8d>] flush_old_exec+0x1cd/0x750
[<c017fd43>] __slab_free+0xd3/0x360
[<c0171309>] remove_vma+0x39/0x50
[<c011ce20>] do_page_fault+0x0/0x790
[<c0307d52>] error_code+0x72/0x78
[<c018007b>] alloc_loc_track+0xab/0xc0
[<c018a137>] flush_old_exec+0x577/0x750
[<c018a39d>] kernel_read+0x3d/0x60
[<c01b73be>] load_elf_binary+0x36e/0x1aa0
[<c016421f>] get_page_from_freelist+0x2cf/0x4d0
[<c01646ce>] __alloc_pages+0x5e/0x360
[<c0175705>] anon_vma_prepare+0x85/0xe0
[<c016eabd>] handle_mm_fault+0x60d/0x850
[<c016eacb>] handle_mm_fault+0x61b/0x850
[<c0184b45>] do_sync_read+0xd5/0x120
[<c016c60d>] vm_normal_page+0x1d/0x70
[<c016c60d>] vm_normal_page+0x1d/0x70
[<c016d479>] follow_page+0x119/0x1c0
[<c016edd1>] get_user_pages+0xd1/0x2f0
[<c01b7050>] load_elf_binary+0x0/0x1aa0
[<c01898ec>] search_binary_handler+0x15c/0x290
[<c018ab9c>] do_execve+0x21c/0x250
[<c01033c6>] sys_execve+0x46/0x80
[<c01050d8>] sysenter_past_esp+0x6d/0xa5
[<c0300000>] cpu_init+0x220/0x29a
=======================
Code: 08 0f 94 c0 84 c0 0f 84 88 00 00 00 8b 04 24 31 db 8b 78 04 eb 09 8d b6 00 00 00 00 83 c3 01 89 d8 c1 e0 05 39 07 76 3c 8b 47 0c <8b> 34 98 85 f6 74 ea 89 dd c1 e5 07 f7 c6 01 00 00 00 74 17 89
EIP: [<c012b737>] put_files_struct+0x37/0xb0 SS:ESP 0068:de121bb8
---[ end trace 255f477a12072e9b ]---
Fixing recursive fault but reboot is needed!
BUG: scheduling while atomic: dirname/9173/0x00000002
Pid: 9173, comm: dirname Tainted: P D 2.6.25-ARCH #1
[<c030542d>] schedule+0x3ed/0x850
[<c0129763>] release_console_sem+0x1b3/0x1d0
[<c012d373>] do_exit+0x663/0x6a0
[<c0106e28>] die+0x1b8/0x1c0
[<c011cfd1>] do_page_fault+0x1b1/0x790
[<c01291d7>] __call_console_drivers+0x57/0x70
[<c01fad04>] number+0x2b4/0x2c0
[<c01fb76f>] vsnprintf+0x43f/0x790
[<c024ec7f>] vt_console_print+0x23f/0x330
[<c016fe66>] free_pgd_range+0x166/0x1e0
[<c011ce20>] do_page_fault+0x0/0x790
[<c0307d52>] error_code+0x72/0x78
[<c017007b>] sys_mincore+0xeb/0x3e0
[<c012b737>] put_files_struct+0x37/0xb0
[<c012ce7a>] do_exit+0x16a/0x6a0
[<c0106e28>] die+0x1b8/0x1c0
[<c011cfd1>] do_page_fault+0x1b1/0x790
[<c018cc23>] do_lookup+0xf3/0x1b0
[<c0197ff3>] __d_lookup+0x143/0x160
[<c011e6cf>] kunmap_atomic+0x3f/0xe0
[<c015e059>] file_read_actor+0xd9/0xf0
[<c0160e3b>] generic_file_aio_read+0x59b/0x630
[<c019cd83>] mntput_no_expire+0x13/0x70
[<c017ebf9>] add_partial+0x19/0x70
[<c0171309>] remove_vma+0x39/0x50
[<c017fd43>] __slab_free+0xd3/0x360
[<c017ebf9>] add_partial+0x19/0x70
[<c0189d8d>] flush_old_exec+0x1cd/0x750
[<c017fd43>] __slab_free+0xd3/0x360
[<c0171309>] remove_vma+0x39/0x50
[<c011ce20>] do_page_fault+0x0/0x790
[<c0307d52>] error_code+0x72/0x78
[<c018007b>] alloc_loc_track+0xab/0xc0
[<c018a137>] flush_old_exec+0x577/0x750
[<c018a39d>] kernel_read+0x3d/0x60
[<c01b73be>] load_elf_binary+0x36e/0x1aa0
[<c016421f>] get_page_from_freelist+0x2cf/0x4d0
[<c01646ce>] __alloc_pages+0x5e/0x360
[<c0175705>] anon_vma_prepare+0x85/0xe0
[<c016eabd>] handle_mm_fault+0x60d/0x850
[<c016eacb>] handle_mm_fault+0x61b/0x850
[<c0184b45>] do_sync_read+0xd5/0x120
[<c016c60d>] vm_normal_page+0x1d/0x70
[<c016c60d>] vm_normal_page+0x1d/0x70
[<c016d479>] follow_page+0x119/0x1c0
[<c016edd1>] get_user_pages+0xd1/0x2f0
[<c01b7050>] load_elf_binary+0x0/0x1aa0
[<c01898ec>] search_binary_handler+0x15c/0x290
[<c018ab9c>] do_execve+0x21c/0x250
[<c01033c6>] sys_execve+0x46/0x80
[<c01050d8>] sysenter_past_esp+0x6d/0xa5
[<c0300000>] cpu_init+0x220/0x29a
======================= -
FCP X locks up (not responding)
Twice now on two different projects, once after hours of editing and just today after 30 minutes of editing, FCP X locks up (not responding), spinning beach ball, and I must force close it. When I go to reopen the program and open my project, it is completely BLANK, nothing in it.
I have the lastest upgrade to FCP X and this has happened on both my Mac Pro desktop (Early 2009 with 10 GB of memory and plenty of HD space) as well as on my new Macbook Pro on an external drive.
I HATE that I cannot save the file myself and that APPLE thinks I'm too stupid to do so. YES, I know I can create a whole new project, but that entails saving related files, etc. Just not as simple as a simple SAVE.
Can anyone help me? I am not comfortable starting on a large editing project, unsure if it will lock up and I'll have to start over.My advice is to learn to use a new Application and get comfortable with it (working reliably) before you even contemplate starting an important project.
FCP X is working very well for a great number of people, but it does have its quirks too.
To be able to help you find out why you are getting crashes, you need to supply a lot more information than you already have - length of projects, what video codec you're working with, Whether your media is optimised, where your media, projects and events are stored - how the HDs are formatted etc etc.
Don't lose heart! It's an awesome application - you just need to see why it's not working well on your system.
Here are some of the most common ways to improve performance (you may have already addressed some of these but it's worth reading them.
FCP X runs very well (not perfectly, by any means) on my 2009 MacPro 2 x 2.26 GHz Quad-Core Intel Xeon with 16 GB RAM and ATI Radeon HD 5870 1024 MB
First, check the spec of your iMac against the system requirements:
http://www.apple.com/finalcutpro/specs/
Particularly your graphics card. If it's listed here, it's not suitable:
http://support.apple.com/kb/HT4664
If you are getting crashes, there is some conflict on the OS. Create a new (admin) user account on your system and use FCP X from there - if it runs a lot better, there's a conflict and a clean install would be recommended.
Other ways to improve performance:
Create optimised media.
Hide Waveforms at all times when you don't need them (both in Browser and Storyline / Timeline). They take up a lot of processor power.
Create folders in the Project library and put any projects you are not working on currently, in there. (Twirl it closed to hide them).
Move your Projects and Events to an external HD (make sure it's formatted OS Extended - with journaled on or off) and run from there.
The biggest single improvement I saw in performance was when I upgraded the RAM from 8 GB to 16.
Andy -
When i came home i called apple to check whether my phone is locked or not and they said that its locked to US Verizon even though when i checked on iphoneimei it said sim status unknown. I put my 2degrees (NZ carrier) in today and it worked fine. I got into the settings and turned off the automatically part of carrier and there were 3 options for me to choose 2degrees vodafone and telecom. Because of that, im quite confused abt whether my phone is locked or not since im from vietnam so i want to know if i can use vietnamese sim card when i go home. Thanks for your help@verizon
Hi tranvietanh - I appreciate you contacting us all the way from New Zealand! I can confirm that the iPhone 5s and all of our other 4G LTE device are not SIM locked. As the carrier in New Zealand may not support the exact same frequencies and cellular bands that we use on our network, we are unable to support the device if using a 3rd party SIM.
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport -
FM or table to check whether a transaction is locked or not
Hi all.
I need to create change a return order (VA02 Transaction ) & then need to create a delivery (VL01N Transaction) for this
return order no. My issue is before creating delivery (VL01n) I need to check whether return order (VA02) is lockked or not in report program. Is there any FM or table for this. Thanks in advance.
Kind Regards,
samiHi,
check the below function module to check the return order is locked or not..
CALL FUNCTION 'ENQUEUE_EVVBAKE'
EXPORTING
mode_vbak = 'E'
mandt = sy-mandt
vbeln = w_lvbeln "pass return order
x_vbeln = ' '
_scope = '2'
_wait = ' '
_collect = ' '
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3.
IF sy-subrc NE 0.
" Sales Order is locked
ENDIF.
Prabhudas -
We need to check whether the order is locked or not?
I need to check whether the order is locked or not?
I tried to use this RFC KAUF_ORDER_READ and passed Order no.
I manually locked the order( using Tcode -IW32) but still Function module is not returning 'X' in FIELDS flg_locked and FLG_ENQUE of the structure E_KAUF.
the FM should return 'X' in these fields.
Please help.
Coudl anybody suggest me how I can check using RFC/ Table fields etc that whether the order is locked or not?Hi Rohit,
Try this code. Check the flag.
Note : Order number should have left padding of Zero
DATA : order_tab TYPE TABLE OF ord_pre,
wa TYPE ord_pre,
flag TYPE rc27x-flg_sel.
wa-aufnr = '000004006789'. "Order number should have left padding of Zero
APPEND wa TO order_tab.
CALL FUNCTION 'CO_ZF_ORDER_READ'
EXPORTING
flg_dialog = ' '
* FLG_ENQUEUE = 'X'
* OBJECTS_IMP = ' '
* EXPLODE_IMP = ' '
* FLG_PROT_IMP = ' '
* FLG_NO_EXTERNAL = ' '
* FLG_NO_BANF =
* FLG_CHECK_SIM =
* IMPORT_MESSAGE_ID =
* CHECK_STATUS_READ = ' '
* FLG_NO_GOS = ' '
* FLG_CALLED_TO_COPY = ' '
IMPORTING
flg_enqueue_ok = flag
* FLG_ESCAPE =
TABLES
* AUFNR_DEL_EXP =
aufnr_tab_imp = order_tab
EXCEPTIONS
ORDER_NOT_FOUND = 1
RELEASE_NO_CHANGE = 2
OTHERS = 3
IF sy-subrc = 0.
WRITE flag. "If Flag is X order is not locked
ENDIF.
Regards
Rajvansh
Edited by: Rajvansh Ravi on Nov 27, 2008 12:33 PM -
On two computers installed Desktop 7 and Lotus Notes crashed when I performed Organizer sync.
I upgraded to Desktop 7 on two very different computers. In both cases after following the prompts Lotus Notes crashed when I performed an organization sync. I sync calendar, memo and tasks 2 way and use defualts. Went back to (uninstalled 7) Desktop 6.1.0.36 and everything works fine now. We use Lotus Notes client 7.0.2
This is one of the most important features so it must work flawlessly. I use usb to sync. This is Windows XP 64 bit. I have another computer with same problem that is Windows XP 32 bit that use bluetooth to sync.
The Desktop Manager does not crash. Even if Lotus Notes Client is not running, while doing a sync I get display indicating that Lotus Notes crashed. It says it is sending diagnostic information to the admin but it stays there for hours and closer examination indicates no cpu cycles are being used. (SysInternals process explorer used to debug stuck threads - I am a software developer.)That doesn't make sense, I used to go back and forth between my two computers and transfer music from each to my ipod. It was never a problem. Now with Itunes 7, it will not let me. Plus, I used to be able to drag playlists into the ipod and then the songs would transfer. Now when I drag up the playlists it won't let me drop them into the ipod. So . . . it can't be impossible to put music from two computers onto one ipod.
-
SQL Exception: A lock could not be obtained within the time requested
Hi Friends,
In one of my processes there is an automatic activity which reads some records from an excel sheet and loads them in a separated array of objects and then for each object in the array it creates a copy using Split-N. There are about 2000 records read which takes about 3 minutes to process in Fuego Studio. But, when it comes to process Split-N activity, it takes pretty long time... keeps processing the for loop for about 15 mins and then I get SQL Exception: SQL Exception: A lock could not be obtained within the time requested (Details below). In the meantime it processes close to 950 records.
In order to resolve it I tried increasing timeout interval in Server Preferences to 2400 secs changig default 1200 secs but no results.
To my utter surprise none of the logMessages get logged until Split-N activity completes.
Can somebody please put more light on this and suggest if I'm doing something wrong?
FYI, I'm posting my Split-N code and the SQL exception details.
EXCEPTION
=========
Problems updating the BAM database. Reason:Unable to connect to the database.
Caused by: A lock could not be obtained within the time requested
fuego.analyzer.UpdaterRuntimeException: Unable to connect to the database.
at fuego.analyzer.UpdaterRuntimeException.cannotConnecToDatabase(UpdaterRuntimeException.java:80)
at fuego.analyzer.UpdaterRunner.synchronizeMetadata(UpdaterRunner.java:494)
at fuego.analyzer.UpdaterRunner.run(UpdaterRunner.java:273)
at fuego.analyzer.UpdaterRunner.runUpdater(UpdaterRunner.java:176)
at fuego.server.service.BAMRunnerService.runUpdater(BAMRunnerService.java:62)
at fuego.server.execution.BAMUpdater.execute(BAMUpdater.java:33)
at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:290)
at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:465)
at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:543)
at fuego.transaction.TransactionAction.start(TransactionAction.java:216)
at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:116)
at fuego.server.execution.DefaultEngineExecution.executeAutomaticWork(DefaultEngineExecution.java:56)
at fuego.server.execution.EngineExecution.executeAutomaticWork(EngineExecution.java:42)
at fuego.server.execution.ToDoItem.executeAutomaticWork(ToDoItem.java:265)
at fuego.server.execution.ToDoItem.run(ToDoItem.java:536)
at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:752)
at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:732)
at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:138)
at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:130)
at fuego.fengine.ToDoQueueThread$PrincipalWrapper.processBatch(ToDoQueueThread.java:429)
at fuego.component.ExecutionThread.work(ExecutionThread.java:816)
at fuego.component.ExecutionThread.run(ExecutionThread.java:395)
Caused by: SQL Exception: A lock could not be obtained within the time requested
at com.ibm.db2cs.m.j.generateCsSQLException(Unknown Source)
at com.ibm.db2cs.m.b.wrapInSQLException(Unknown Source)
at com.ibm.db2cs.m.b.handleException(Unknown Source)
at com.ibm.db2cs.m.d.handleException(Unknown Source)
at com.ibm.db2cs.m.t.handleException(Unknown Source)
at com.ibm.db2cs.m.s.closeOnTransactionError(Unknown Source)
at com.ibm.db2cs.m.s.movePosition(Unknown Source)
at com.ibm.db2cs.m.s.next(Unknown Source)
at fuego.jdbc.FaultTolerantResultSet.next(FaultTolerantResultSet.java:553)
at fuego.analyzer.Updater.loadInstanceInfoValues(Updater.java:1039)
at fuego.analyzer.Updater.loadInstanceInfoValues(Updater.java:988)
at fuego.analyzer.Updater.loadInstanceInfo(Updater.java:982)
at fuego.analyzer.Updater.synchronize(Updater.java:252)
at fuego.analyzer.UpdaterRunner.synchronizeMetadata(UpdaterRunner.java:480)
... 20 moreSplit-N Code
==========
for (int i = 0; i <= (eventList.events.count() - 1); i++) {
copy = clone(this);
logMessage("INSTANCE(" + (i + 1) + ") CLONED: " + copy.currEvent.text_data, severity : DEBUG);
copy.currEvent = eventList.events.event;
logMessage("Event(" + (i + 1) + ") Assigned.", severity : DEBUG);
copy.eventList = null;
logMessage("EventList(" + (i + 1) + ") set to null.", severity : DEBUG);
copy.description = (copy.currEvent.text_data + "(" + copy.currEvent.login_name + ")").strip(len : 200);
logMessage("EVENT(" + (i + 1) + ") COPIED: " + copy.currEvent.text_data, severity : DEBUG);
Any help in this regard would be highly appreciated.
Regards,
Manoj
=============================================
[url http://www.economicalwebsites.com]Cheap Web Hosting by EconomicalWebsites.com
=============================================
Edited by goelmk at 12/05/2007 8:14 AMHi Friends,
In one of my processes there is an automatic activity which reads some records from an excel sheet and loads them in a separated array of objects and then for each object in the array it creates a copy using Split-N. There are about 2000 records read which takes about 3 minutes to process in Fuego Studio. But, when it comes to process Split-N activity, it takes pretty long time... keeps processing the for loop for about 15 mins and then I get SQL Exception: SQL Exception: A lock could not be obtained within the time requested (Details below). In the meantime it processes close to 950 records.
In order to resolve it I tried increasing timeout interval in Server Preferences to 2400 secs changig default 1200 secs but no results.
To my utter surprise none of the logMessages get logged until Split-N activity completes.
Can somebody please put more light on this and suggest if I'm doing something wrong?
FYI, I'm posting my Split-N code and the SQL exception details.
EXCEPTION
=========
Problems updating the BAM database. Reason:Unable to connect to the database.
Caused by: A lock could not be obtained within the time requested
fuego.analyzer.UpdaterRuntimeException: Unable to connect to the database.
at fuego.analyzer.UpdaterRuntimeException.cannotConnecToDatabase(UpdaterRuntimeException.java:80)
at fuego.analyzer.UpdaterRunner.synchronizeMetadata(UpdaterRunner.java:494)
at fuego.analyzer.UpdaterRunner.run(UpdaterRunner.java:273)
at fuego.analyzer.UpdaterRunner.runUpdater(UpdaterRunner.java:176)
at fuego.server.service.BAMRunnerService.runUpdater(BAMRunnerService.java:62)
at fuego.server.execution.BAMUpdater.execute(BAMUpdater.java:33)
at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:290)
at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:465)
at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:543)
at fuego.transaction.TransactionAction.start(TransactionAction.java:216)
at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:116)
at fuego.server.execution.DefaultEngineExecution.executeAutomaticWork(DefaultEngineExecution.java:56)
at fuego.server.execution.EngineExecution.executeAutomaticWork(EngineExecution.java:42)
at fuego.server.execution.ToDoItem.executeAutomaticWork(ToDoItem.java:265)
at fuego.server.execution.ToDoItem.run(ToDoItem.java:536)
at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:752)
at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:732)
at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:138)
at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:130)
at fuego.fengine.ToDoQueueThread$PrincipalWrapper.processBatch(ToDoQueueThread.java:429)
at fuego.component.ExecutionThread.work(ExecutionThread.java:816)
at fuego.component.ExecutionThread.run(ExecutionThread.java:395)
Caused by: SQL Exception: A lock could not be obtained within the time requested
at com.ibm.db2cs.m.j.generateCsSQLException(Unknown Source)
at com.ibm.db2cs.m.b.wrapInSQLException(Unknown Source)
at com.ibm.db2cs.m.b.handleException(Unknown Source)
at com.ibm.db2cs.m.d.handleException(Unknown Source)
at com.ibm.db2cs.m.t.handleException(Unknown Source)
at com.ibm.db2cs.m.s.closeOnTransactionError(Unknown Source)
at com.ibm.db2cs.m.s.movePosition(Unknown Source)
at com.ibm.db2cs.m.s.next(Unknown Source)
at fuego.jdbc.FaultTolerantResultSet.next(FaultTolerantResultSet.java:553)
at fuego.analyzer.Updater.loadInstanceInfoValues(Updater.java:1039)
at fuego.analyzer.Updater.loadInstanceInfoValues(Updater.java:988)
at fuego.analyzer.Updater.loadInstanceInfo(Updater.java:982)
at fuego.analyzer.Updater.synchronize(Updater.java:252)
at fuego.analyzer.UpdaterRunner.synchronizeMetadata(UpdaterRunner.java:480)
... 20 moreSplit-N Code
==========
for (int i = 0; i <= (eventList.events.count() - 1); i++) {
copy = clone(this);
logMessage("INSTANCE(" + (i + 1) + ") CLONED: " + copy.currEvent.text_data, severity : DEBUG);
copy.currEvent = eventList.events.event;
logMessage("Event(" + (i + 1) + ") Assigned.", severity : DEBUG);
copy.eventList = null;
logMessage("EventList(" + (i + 1) + ") set to null.", severity : DEBUG);
copy.description = (copy.currEvent.text_data + "(" + copy.currEvent.login_name + ")").strip(len : 200);
logMessage("EVENT(" + (i + 1) + ") COPIED: " + copy.currEvent.text_data, severity : DEBUG);
Any help in this regard would be highly appreciated.
Regards,
Manoj
=============================================
[url http://www.economicalwebsites.com]Cheap Web Hosting by EconomicalWebsites.com
=============================================
Edited by goelmk at 12/05/2007 8:14 AM -
After acceessing home screen with assistive touch auto lock is not working in my iphone 4S after upgrading to ios6
Additional testing i perform to make wifi work but nothing works out:
i did re-installing the software using iTunes, reset the network settings restarting the phone. Nothing solves my problem.
wifi was working with older software versions. i think there should be a problem with 8.1.1.
is anyone has fix for this issue? -
HT1414 my password lock is not working after my last upgrade
I just upgraded my iPad and now my password lock is not working.
Hi krburke,
Welcome to the Support Communities!
The article below may be able to help you with this.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
I hope this information helps ....
- Judy -
I just want to know that if I buy an iphone 4S here in melbourne can i use it in china?
i don`t know whether it`s locked or not and i don`t know what`s the network in china as well.
Can somebody please help？
I am really in a hurry to know it.
Thanks a lot.
P.S: For the iphone 4S. is there any difference for the one from online shop or the actual store?iPhones purchased from the online Apple Store in Australia will be unlocked. To the best of my knowledge, unlocked iPhone are not available from the physical Apple Stores at this time, though you can call the Apple Store in Melbourne and inquire.
Note that the warranty on iPhones is not international, so if you purchase an iPhone in Australia and it needs service, you would have to ship the iPhone to someone in Australia to take or send to Apple for service and then ship it back to you.
Regards.
(Note for any readers: this is an old thread and I posted before noticing the date, but decided to leave my reply in case anyone else finds the thread and has the same question). -
2.1 Battery Better (for most users)? & Apps Not Crashing, True? Worth it?
Does it really fix these things? And how can Apple claim it fixes the battery for (most) users, are there phones with different batteries and or hardware? And more important, are the Apps not crashing to the Apple logo? Calls not dropping, really?
Copied from the 2.1 update screen:
iPhone 2.1 Software Update
iPhone version 2.1 contains many bug fixes and improvements, including the following:
• decrease in call set-up failures and call drops
• significantly improved battery life for most users
• dramatically reduced time to backup to iTunes
• improved email reliability, notably fetching email from POP and Exchange accounts
• faster installation of 3rd party applications
• fixed bugs causing hangs and crashes if you have lots of 3rd party applications
• improved performance in text messaging
• faster loading and searching of contacts
• improved accuracy of the 3G signal strength display
• repeat alert up to two additional times for incoming text messages
• option to wipe data after ten failed passcode attempts
• Genius playlist creation
For feature descriptions and complete instructions, see the user guide for your iPhone at:
<http://www.apple.com/support/manuals/iphone>
For more information about iPhone, go to:
<http://www.apple.com/iphone>
To troubleshoot your iPhone, or to view additional support information go to:
<http://www.apple.com/support/iphone>
For information on the security content of this update, please visit this website:
<http://support.apple.com/kb/HT1222>no idea about any of these things all i want to know is if it fixed the txt sound not working and what on earth is the 2 txt sounds mean?? im assuming if u dont look at ur txt it will sound again???, ive checked 3g its still sh1t here even tho im in a huge 3g area apparently but i didnt have many probs with last update so who knows
-
How can you tell if your iPhone 4s is locked or not, without replacing sim?
Hello everyone.
I'm new to the site and iPhone world,
How can you tell if your iPhone 4s is locked or not, without replacing sim?
Any tips or tricks?
Supposably, Sprint iPhone 4s prior to Nov.11th are unlocked, in what extend this true?
thanks in advance.Call Sprint and ask
Maybe you are looking for
-
How do I use the same execute advanced actions?
I am using captivate 5, windows 7 I created a slide with several click boxes and images. I name them, for example, Click Box A Image A Click Box B Image B Click Box C Imsge C And perhaps Images D, E, F I created Advanced actions, for example, Sho
-
Is there a standard SAP report where I can pull sales orders by a specific batch. If we need to do a recall on a particular batch we would need to find all sales of this batch. If there is no standard report to accomplish this, is there a sales rep
-
Hi Please guide me about creation of document types for PR/PO. If i want to create document type for the capital item as say ZCAP. What are the item categories I should select. Also how does the item category affects the document type and further cre
-
Getting Error: Config file does not have IDStore WLS Administrator Username
I am configuring OIM/OAM in HA mode following the EDG: - Enterprise Deployment Guide for Oracle Identity Management - 11g Release 1 (11.1.1.5) I am at step - 10.4.5 Creating Users and Groups for Oracle WebLogic Server I am executing this command: - i
-
Anyone know of a way of saving an e-mail attachment, or the whole e-mail with the attachment? I thought if I just moved it to the "Drafts" folder, I could use it like a place to save things, but that did not work. Any way to create an extra mail fold