Locked out all users

I changed the values of some of the mandatory attributes of the root dn under which users were defined and this has caused all users except orcladmin to be locked out. When I try to add new users, it gives me the error -
Not willing to perform because of one of these reasons
1. OID is slow
2. OID is down
3. not enough privileges
Is there a way to restore the users login?
thanks

have u tried unlocking passwords
and that doesnt work? one thing you can
do is if you have a backup of your ASDB
you should be able to do a restore of that
back to before you changed things...

Similar Messages

How to find out all user exits edited

Hi All,
Would you know how to find out all user exits have been ever edited?
Can we find out those user exit by some tcode or table?
Thank you very much
Best Regards,
Calvin
Edited by: Sam Sum on Mar 2, 2009 5:09 AM

Hi,
Just try this in your system.
Go to SE38 and give ZX* and press F4.
Have a look at table MODATTR to find the active projects in your system.
Regards
Edited by: Rajvansh Ravi on Mar 2, 2009 5:17 AM

Hard drive access locked to all users

I have a second internal HD on my Power Mac G5 that is locked to all users. I have tried many different things and have been unable to make it available to myself. I could just format the drive but there is valuable work data on there. Any help would be appreciated.

Hi musicmn-
Greetings and welcome to the Apple Discussion boards
This happens even when logged in with an admin account?
Are you able to repair the drive via Disk Utility?
Luck-
-DaddyPaycheck

Windows 7 PC locking out domain user in Windows Server 2008r2 domain

I have reviewed dozens of related questions, but none have given me an answer that works on this situation.
We replaced an XP desktop with a Windows 7 desktop. It keeps locking out just user(of over 25 migrated). I have disabled the Windows 7 credentials, made sure the patches were in place, there are no other devices-wireless or otherwise.
The users pc has a kvm attached for another system, we have a Windows 2008r2 server. The user does not save any passwords, I have make changes recommended in the registry. They do have a couple mapped drives. Logs show that it is the users
pc that is causing the lockout, but much of the users time they are on the other system. We have 4 other users that have the exact same setup but are not having any issues. It happens several times a day and I must unlock their password on the
ad. Sometimes if we wait 45 min or so it will unlock itself. Strange considering settings lockout user after 5 bad passwords and lock them out for 120 minutes.
I have tried virtually everything I have read relating to this issue in Win7, 2008r2.
User is getting frustrated and so am I!.
Thank you.
Rebecca Palmer

Try using this tool (free for limited period) and check if you can trace from where the account is getting locked :
http://www.netwrix.com/account_lockout_examiner.html
http://www.sophos.com/en-us/products/free-tools/conficker-removal-tool.aspx
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Logging out all users

To perform a back-up I want to log out all users. Currently I use the 'unloadapp' ESSCMD, but this does not seem to log out users who are currently retrieving data. As a result my back-up fails.Does the 'logoutallusers' command log of all users (active, inactive)?Regards,JG

Howdy!We do this via script for each application using the following essmsh syntax:"alter application appname disable connects;"This works great. We then re-establish any connections that we killed with the following statement:"alter application appname enable connects;"Hope this helps!JR

Windows 8.1 & office home business 2012 - Locks out ALL office programs * There was a problem sending the command to the program*

Hello,
I'm at wits end...BRAND NEW HP pavilion preloaded wit windows 8.1. Purchased a separate full version of Office 2012 Home and Business...downloaded it..loaded ...ran it....it runs fine ..UNTIL maintenance or other updates come through....then I receive
a ** * There was a problem sending the command to the program**** and it lock out ALL office programs with the same message.
My only fix has been to recover to a date BEFORE the updates or maintenance..and this works..UNTIL the updates or maintenance install....then it's Groundhog day all over again.
I have tried all the suggested fixes I have found..NONE work..NONE!! And pray tell how you can get into advanced options or any other portion of the programs to turn off the DDE when you cant access the programs or initialize them at all!!!??
SOS!!

Hi,
I have definitely heard your frustration, we can try these steps to check if it works.
Note: Before doing the following steps, please make a backup of your registry first.
1. edit "HKEY_CLASSES_ROOT\Word.Document.12\shell\Open " and delete the "ddeexec" key. The "ddeexec" key can also be deleted from "HKEY_CLASSES_ROOT\Word.DocumentMacroEnabled.12\shell\Open".
2. Change the registry for Word 2013 by right-clicking and saving:
Windows Registry Editor Version 5.00 [-HKEY_CLASSES_ROOT\Word.Document.12\shell\Open\ddeexec] @="[REM _DDE_Direct][FileOpen(\"%1\")]" [-HKEY_CLASSES_ROOT\Word.Document.12\shell\Open\ddeexec\Application] @="WordView" [-HKEY_CLASSES_ROOT\Word.Document.12\shell\Open\ddeexec\Topic]
@="System" [-HKEY_CLASSES_ROOT\Word.DocumentMacroEnabled.12\shell\Open\ddeexec] @="[REM _DDE_Direct][FileOpen(\"%1\")]" [-HKEY_CLASSES_ROOT\Word.DocumentMacroEnabled.12\shell\Open\ddeexec\Application] @="WordView" [-HKEY_CLASSES_ROOT\Word.DocumentMacroEnabled.12\shell\Open\ddeexec\Topic]
@="System"
3. Double-click the file after downloading to update the registry.
For more detail information:
http://www.dilloway.co.uk/there-was-a-problem-sending-the-command.html

User settings reset and locked out of user folders ! How do I retreive?

Hi everyone,
I'm sure a number of people here on the forums have come across the problem with the blue tint that appears every now and then. It usually appears when connecting an external monitor after the you come back from the screen saver.
Yesterday it happened for the first time without an external monitor connected. I have found a number of sites that have suggested using the command 'sudo chmod 664 *' within the Terminal. I have used it a couple of times to fix this problem but it did not work hence the reason it happened yesterday without a monitor connected. When I did use this command previously I first entered
cd /library/colorsync/profiles/display
When i did it for this occassion i forgot to enter the display folder first.
After this I did a restart and all my user settings were reset and I was locked out of all my user folders. I lost all my desktop settings and everything was back to when I first started my computer.
I did some hunting and found the command 'sudo chmod 777'. I tried this then did a reset and my desktop background returned and the folders were unlocked.
What I want to know is if this is the correct command to bring everything back to normal?
My user permissions in terminal are listed below
Using the command sudo chmod 664 *
drw-rw-r--+ 15 JoeBros staff 510 11 Jun 23:33 Desktop
drw-rw-r--+ 19 JoeBros staff 646 22 May 20:44 Documents
drw-rw-r--+ 46 JoeBros staff 1564 25 Jun 15:08 Downloads
drw-rw-r--+ 45 JoeBros staff 1530 10 Jun 23:56 Library
drw-rw-r--+ 4 JoeBros staff 136 1 Apr 19:19 Movies
drw-rw-r--+ 38 JoeBros staff 1292 4 Apr 18:08 Music
-rw-rw-r-- 1 JoeBros staff 92352512 29 May 18:20 Parallels-Desktop-5600-Mac-en.dmg
drw-rw-r--+ 57 JoeBros staff 1938 25 Jun 16:02 Pictures
drw-rw-r--+ 6 JoeBros staff 204 14 Jun 15:56 Public
drw-rw-r--+ 5 JoeBros staff 170 26 Mar 00:59 Sites
This is what is displayed after sudo chmod 777
total 180376
drwxrwxrwx+ 15 JoeBros staff 510 11 Jun 23:33 Desktop
drwxrwxrwx+ 19 JoeBros staff 646 22 May 20:44 Documents
drwxrwxrwx+ 46 JoeBros staff 1564 25 Jun 15:08 Downloads
drwxrwxrwx+ 45 JoeBros staff 1530 10 Jun 23:56 Library
drwxrwxrwx+ 4 JoeBros staff 136 1 Apr 19:19 Movies
drwxrwxrwx+ 38 JoeBros staff 1292 4 Apr 18:08 Music
-rwxrwxrwx 1 JoeBros staff 92352512 29 May 18:20 Parallels-Desktop-5600-Mac-en.dmg
drwxrwxrwx+ 57 JoeBros staff 1938 25 Jun 16:02 Pictures
drwxrwxrwx+ 6 JoeBros staff 204 14 Jun 15:56 Public
drwxrwxrwx+ 5 JoeBros staff 170 26 Mar 00:59 Sites
Does this look correct ??
Any help would be great thanks

I assume this access is open to everyone when I connecto any wireless network
No necessarily, it depends whether you just changed your home folders and nothing else.
But just your home folders present a problems as they should have extended attributes which are now removed. More on that later.
Using one chmod to a directory affects all equally, though the files may have individually different permissions.
I don't know how extensively you have altered the modes permissions, but from what you have shown in your first post your Home folders are incorrect.
For your home folder, which is the default location when you start Terminal, and I dont think you have strayed from there, all the listings, except Parallels are folders, prefaced with the letter d. for folder.
On my machine, for example, the pattern for the home folders all show
drwx------@ 5 xxxxxx staff 170 25 Jun 06:07 Desktop
normally that would be chmod 700 Desktop which will get you
drwx------
but note the @ which shows an extended attribute or ACL in Leopard.
to write the ACL shown as @
You will need to read
man chmod about ACL MANIPULATION OPTIONS
Personally, I think that playing around with chmod without a backup was not a good idea, and I wonder if your ambition has exceeded your knowledge. Sorry if that sounds tough, but a possible Archive and Install may be your safest path I think because what you have messed with was no small oops with a simple fix.
You could just change those home folders to chmod 700 and see how it goes without the attribute, or bite the bullet and do an Archive and Install.
I do not run parallels and so have no idea what is permissions should be.
That Time capsule is starting to look pretty good now
Message was edited by: roam2
Message was edited by: roam2

How an Admin user log into a lock out standard user account?

I remember that I was able to override the access to the standard account user when the standard user has the screen lock out. This appear to be missing in Lion. Has anyone knows how to do this in Lion? Thanks.

From my personal experience I can say that at times, four folders (i guess Assets is one of them) somehow get left in C:\Program Files (x86)\Adobe\Elements 11 Organizer folder.
I delete them and restart my system.. and reinstallation works fine. If that's the case with you, you can try it.
CS Cleaner tool might also help.
Thanks
Andaleeb

How to find out all users accessing a schema

Hi,
How can I find out all the users which has accessed a schema for the last 30 days? Auditing is not enabled in the database.
DB:10.2.0.4
OS:AIX

user13364377 wrote:
Thanks Antonio.
Is it possible to find all the users which have access to the schema?Do you mean OS users access .. ?
Because from v$session we can find users sessions information, if thats what you mean.

How to log out all users from Application to switch partitions?

Hi,
We currently use a maxl script to switch over active partitions and as you may know, users need to be logged out when this happens. The current script we use is:
alter system logout session on application ABANSWER force;
alter system kill request on application $4;
alter system kill request on application FCSTA3;
alter system kill request on application FCSTA4;
alter system kill request on application HISTA;
alter system kill request on application ABANSWER;
drop transparent partition ABANSWER.REPORT from $4.$2;
Quite often we seem to get the issue that some user can't be logged out because they are running something intensive and this causes the partition switch to fail.
Does anyone know a better way to do log out the users or kill the sessions so we can reliably switch the partitions? Any help would be appreciated.
Thanks
Arfan

that means that the app was purchased under that seperate apple id. u will need to delete the app and redownload it using the yahoo one if u want to be able to update it.

Visual Studio Test Controller recovery locks out the user domain account, cannot log into PC

On the recovery tab of the Visual studio Test controller Services properties dialog, there are three recovery settings:
First Failure, Second failure and Subsequent failures. The default settings for these options is to "Restart the Service". I changed my domain password this morning, restared the PC and could not log in because the Visual Studio Test Controller
service tried to restart with the wrong credentials in an infinite loop. This resulted in my account with the domain controller getting locked out. The delay between service restarts was very quick and I could not login and stop the service. The kind admin
fellow logged in to the PC and changed the service settings.
Is there a place where the recovery service restart interval can be changed to prevent this situation?

Hi bcautest1,
>>I changed my domain password this morning, restared the PC and could not log in because the Visual Studio Test Controller service tried to restart with the wrong credentials in an infinite loop. This resulted in my account with the domain controller
getting locked out.
You said that you couldn't log in, do you mean that you couldn't log in your machine or others?
If you change the domain password, generally we could open the Test Controller configuration and change the logon account for this service.
But if you mean that you couldn't log in your windows now, I'm afraid that it is not the test controller and Agent issue, it would be the windows issue, because it still has this issue even if you use other servers.
Reference:
https://technet.microsoft.com/en-us/library/cc773155(v=ws.10).aspx
Like the following documents here:
http://stackoverflow.com/questions/4468677/domain-account-keeping-locking-out-with-correct-password-every-few-minutes
Maybe the Window support forum would be better for you:
https://social.technet.microsoft.com/Forums/windows/en-US/home?forum=w7itprosecurity
If I misunderstood this issue, please feel free to let me know.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Java SE Ver 7 Uxx locking out domain user account failing Kerberos PreAuth

Java SE Ver 7 all updates are failing Kerberos Pre_Auth and locking domain user accounts because of truncated UDP packets.
When a user opens a page that uses JavaScript their domain account gets a bad password, subsequent openings in the lockout threshold window (5 in 30 minutes for us) results in a domain account lockout.
I have done extensive troubleshooting of this issue and have root caused and been able to prevent it with a less desirable solution. Oracle fixes for the bug below (basically same issue) do not work for me or i'm implementing them incorrectly.
This effects XP\Win7 (32Bit browsers with IE 8 and 9).
Java SE Ver 7 U21 and lesser updates are failing Kerberos Pre_Auth (KRB5KDC_ERR_PREAUTH_FAILED)due to the use of UDP instead of TCP. Starting with the SRV request, UDP exceeds MTU and gets truncated enroute to the KDC. This results in the eventual response from the KDC as bad credential and eventual account lockout if user repeats call for Java.
We have been able to force TCP by blocking UDP 88 on a test station's windows firewall. This prevents the bad password, but injects a delay while kerberos times out UDP and fails to TCP.
Java BUG 8009875 lists the "udp_preference_limit=1" value that forces Java to use TCP, but i can't get this working with a KRB5.config or KRB5.ini file in the c:\windows directory. Even utilizing an environment variable KRB5_CONFIG does not work.
Our expected result is to force Java 7 to use TCP for Kerberos transactions and not UDP. This will be a stop gap until the release of Version 8 next year, which BUG 8009875 says corrects the default UDP call to TCP.

I had this same issue. My fix was to create a custom jass config file that specific to not use the local tgt cache.
If you would like I could provide you with this setup. 1.7 uses GSS/SPNEGO as the first method of auth, this will essentially disable this method of single-sign on.
Http Authentication
GSS/SPNEGO -> Digest -> NTLM -> Basic
It looks like you got a fix so this post could be worthless

HELP! Changing Standalone to OD Master has locked out ALL accounts

In the course of attempting to get iCal server running on my Leopard Server install, I changed the OD role from Standalone to OD Client, pointed to a 10.4.11 OD Master running on the LAN.
When I discovered that 10.4 will not allow the "Enable Calendaring" option via WGM, I changed the iCal/Web/Mail server to OD Master, setup a directory admin, via the assistant, and then attempted to login via WGM.
WGM said something to the effect that I wasn't authorized on the server, using the OD admin user/pass. So, I tried my locally created admin, which also was rejected. Then, I tried using ARD, which now was showing "Access Denied" in the computer list.
I physically accessed the machine, where WGM and Server Admin were rejecting my logins, local and OD Admin. I restarted and the machine came up to the login window, rather than using the auto-login account that is necessitated by my backup software and DNS update. Trying all the local admin login/passes failed, as did the local standard accounts. The only successful login was via root, which isn't making me feel very good.
Logged in as root, I re-selected standalone and restarted, with no positive results. As root, I can see all the local users in WGM, but I cannot change their passwords, I get:
In order to set the password of a a user with an Open Directory Password, your own password type must be Open Directory. Administrators with other password types cannot set the password of a user with an Open Directory password.-- (That's from the 501 user.)
All of my locally-created users show User Password Type(s) of : Open Directory (greyed out) and I cannot change them to Shadow Passwords. I get an "Unexpected Error" that reads: Error of type eDSAuthMethodNotSupported (-14091) on line 2138 of /SourceCache/WorkgroupManager/WorkgroupManager-319.1.1/Plugins/UserAccounts/Use rAdvancedPluginView.mm That location doesn't exist on the drive.
The accounts pane does not allow me to reset the passwords of the users.
The server is running 10.5.4 Intel, upgraded from 10.4.11 PPC (I know, I should have known better, but...) a few months back, without any issues. The users were all created prior to the update (in some cases, prior to 10.4).
I've tried deleting one user, a mail-only account, without a home folder, which resulted in losing the IMAP store. (Ugh. Thankfully, I religiously back-up.) I tried the instructions here: http://support.apple.com/kb/TS1543?viewlocale=en_US (found via: http://discussions.apple.com/thread.jspa?threadID=1620296&tstart=45 ) which seems to have changed the user's password from OD to Shadow, but I've not had the chance to restart, as I'm in the middle of restoring the latest incremental backup to a bootable volume. I did try logging in via the terminal with that user and got: PAM Error (line 396): Cannot make/remove an entry for the specified session
Don't worry... that dull, repetitive Thunck! sound is just me hitting my head on the desk over and over, while DataBackup writes to a spare drive. Any suggestions in the meantime?

Probably a stupid suggestion, but open Directory access (can't remember if they changed the name now... I'm sitting at home) and check to see if the server is still bound to the OD master (from when you pointed it there in step 1).
There are some 'interesting' features when running 10.4 OD and touching it with a 10.5 server/util; I learnt the hard way!
Personally, I would ensure your backup is functioning, do a image of the server HD and reinstall 10.5 server from scratch. It should also rid you of any 10.4->10.5 upgrade bugs which may be lurking in the background...
Michele

How do I lock out outside users

I went through the beginning set-up but how do I make sure the WEP is on and working? Please HELP!!!

A few things you can do to ensure WEP is on and working, and also to keep others out:
First off, if you go to your Network system preference pane, double-click on "AirPort' when "Show: Network Status" is visible. Click on the "AirPort" tab, and you should see "By default, join: Automatic". Click the pulldown menu and select "Perferred Network". You should now see a field with your perferred networks.
Go one by one and click the "-" button to delete them all. Click the "Apply Now" button, and turn AirPort off from your menu bar. When you turn it back on, you will now no longer automatically connect to your network. When you try and connect again, you should be prompted to re-enter your password. This shows that WEP is working.
If you, however, selected to save your AirPort password in your Keychain, you may need to delete that preference (Applications > Utilities > Keychain Access).
You have two options to, essentially, make sure no one but you goes on your wireless network: Closed Network and Access Control. A closed network means that your network name will not show up in your AirPort monitor. The upside to this is that no one who doesn't know your network exists can access your network. The downside is that anyone you want to connect to your network must type in your network name exactly, including your WEP/WPA password, if turned on.
Access Control allows you to control who can go on your network and who can't. This is specific to MAC addresses. The upside to this is that if someone who isn't on your control list tries to access your network, they will receive an error and not be able to connect. The downside to this is that to allow someone who isn't on your control list to connect to your network, you have to enter their MAC address manually.
Both of these features can be found using the AirPort Admin Utility.
Remember: Overall, wireless networks are pretty secure as long as you have at least a password preventing unwanted users on your network. However, no security is perfect.
Hope that helps.
Dual-Core 2.3GHz Power Mac G5 Mac OS X (10.4.3)

Locked out of user after turning off file vault

I was told i had permission issues. I couldn't do simple things like copying files to desktop. Someone told me to turn off file vault. Did it. Now i can't access user at all. Keep getting same message,"...cannot access user at this time..." accompanied by an applications icon. All i really want from that user are my music and photos. Please help, my wife is going to kill me if i lose baby photos.

An update that may help you: I went to my Backups (created in Tiger before I switched) and restored some things from there. Unfortunately it wouldn't give me back everything (iPhoto Library all gone), but I did restore an older iTunes Library and some of my e-mails.
Were you using Backup before you lost everything?

Locked out all users

Similar Messages

Maybe you are looking for