Locked out of computer - Help please!

Since trying to update my security I have been locked out of my computer. Message keeps saying incorrect password?

iOS: Forgotten passcode or device disabled after entering wrong ...

Similar Messages

I accientally synced my iPhone to 2 different computers. Now my older apps are on one computer and new apps are on another. Every time I try to sync all apps on one computer it takes the other apps of and just syncs what is on that computer - Help please

I accientally synced my iPhone to 2 different computers. Now my older apps are on one computer and new apps are on another. Every time I try to sync all apps on one computer it takes the other apps of and just syncs what is on that computer - Help please
I cannot for the life of me figure this out.

What you need to do is connect your phone to iTunes but do not click sync. Go to File at the top and click transfer purchases from phone, that'll put all your apps into iTunes. When it's done transferring, locate your phone on the sidebar and click it. Then find the apps option above the picture of your iphone, you can select which apps you want or don't want on your phone. After selecting your apps then you can sync. Once you do this you should never have your problem anymore.

Locked out of my iphone, please help

So I plugged my daughters iPhone into my iMac and restored my iPhones backup by mistake. The backup that was restored is very old and I have no idea what the passcode is. When I try to restore one of my daughter's backups i receive a message "Go to iCloud Settings on your iPhone and turn off Find My iPhone before restoring your iPhone." Obviously I can't access the phone to disable find my phone so i logged into icloud.com but the only device in there is my existing phone. So I am in the situation where I cannot turn off find my phone for my daughters phone and are locked out without being able to restore.
Any suggestions or advice would be greatly appreciated.

Force the phone into recovery mode, as described here, & restore it:
http://support.apple.com/kb/ht1808

Locked out of my phone please help!

I changed my passcode today on my lockscreen but I forgot it. Now my phone is disabled and it says to connect to itunes. Well I logged into my itunes account but it still isnt connected. Can someone please help me unlock my phone or atleast sync it to itunes??

iOS: Forgotten passcode or device disabled after entering ...

24" iMac aluminium screen black? can here computer is running but screen is totally...dead, black... can even see on my other imac that it is visible on bluetooth... however, sharing is not turned on on blacked out imac? Help please.

I can hear the computer is running, sounds normal. I can even pick it up on my other mac via blue-tooth. However sharing is not turned on blacked out iMac so can't even access it through my working

I can hear the computer is running, sounds normal. I can even pick it up on my other mac via blue-tooth. However sharing is not turned on blacked out iMac so can't even access it through my working

Exported my library to an external drive (new with nothing else on it) Trying to import to iTunes on another computer (Dell) with out success. Help Please

Need help importing my library from and external drive

After admittedly only a quick read the one thing you don't say is how you are trying to make this move. Most people with moving library issues do it the wrong way. Plenty of web sites tell you how to do it the wrong way.
If the iTunes application is started before the drive with the library is fully mounted and awake iTunes will revert back to the internal drive.

Nano won't charge/turn on/not recognized by computer help please

i have a new nano, i installed the software, but when i plug the nano in the computer acts like it does not even recognize it, it won't charge, nothing appears on the screen, i tried to install software and connect to another computer doesn't work either i tried all usb ports on baoth computers but nothing help please

i have tried just about everything i could find on the website i am just really confused and hoping it is not something i'm doing but since i pulled it out of the box nothing has came up on the screen and it will not charge when plugged into the usb the comuter does not even recognize

Panic Kernal: You need to restart your computer, Help please...

Yesterday I installed an update on my MacBook and everything went haywire. I installed the Apple updates
that were recommended for my computer when it did it's weekly update
check. After the install I quit all open applications and did a
restart per the on screen prompt. Finder closed and the computer just
sat for over a half hour and never would finish shutting down. No key
strokes or commands would do anything. As a last ditch effort I held
the power key down until it shut down. I waited a minute then powered
back up. The gray screen with the apple logo comes up then the spinning wheel. Then a
panic kernal saying the computer needs to be restarted. I tried ten
times then I reset the PRAM then I did two hardware checks. First the
short check then the long one. Both tests showed all hardware to be
fine.Then I called Apple. They told me to reset the PRAM, told me to
do a hardware check then told me to boot in safe mode. Then told me to
try an archive reinstall by inserting disc one, power on, then hold
the C key after the startup chime sounds. One of two things happen
when this is done, it either goes to a blank blue screen or the "You
need to restart the computer" message comes up. If I power on with the
disc in and hold the option key the hard drive and the disc shows on
the screen. If I click on the hard drive the "restart message comes up. If I
click on the disc the blank blue screen usually comes up but twice the
"restart" message came up. I have tried all of the start-up key strokes, Once I got into safe mode but I can't get into it anymore, it now gives the you need to restart message. I can get into Verbose and Single user mode but I don't know of anything to try once I'm in either of those modes.I tried to boot system from single user mode by typing in the command sh /etc/rc but a long list of code just comes up and says something about the panic kernal which I believe is telling me that the same problem
I have trying a normal boot is keeping it from booting in single user mode also. I can do a hardware test(I've done this 3 times and everything shows to be OK). The main problem I have now is it won't boot normally and it won't boot from the install disc so I am truly stuck. I am at a loss as to what I should try next
since I can't even reinstall the software. Any help will be greatly
appreciated especially since my free phone help ended 2 days ago and
today was the first time I ever needed it!!
thanks, Jason

Thanks for replying, I have no peripherals attached, I am booting from the MacBook Tiger DVD one that came with the machine. I get the panic kernal with or without the disc installed. All hardware checks out fine in the three hardware checks I've done. I am almost positive the problem is stemming from the Apple updates performed since this is exactly when my problems began(trying to restart after the Apple updates). I just can't get the machine to boot from the disc no matter what I try so I can reinstall the operating system. I even tried using an external DVD-ROM once to see if it would boot from it but it did the exact same thing as when I try booting from the internal drive. Yes my files are backed up to an external hard drive. I've got no problem doing a Nuke and Repave if I must but since it won't boot from the disc I don't know how I can even do this. I know it is under warranty but since the hard ware checks OK it looks like there would be a way to get it running again without sending it in for repairs. However I am starting to think that's what I'm gonna have to do. I'm just glad I still have an old clamshell iBook to work with so I can access the internet to seek help. Thanks for your input, can you think of anything else I could try?

Error message appears when I turn on my computer, help please!

When I start my computer this message appears "Failed to initialize Main Window Error HRESULT E_fail has been returned from a call to a COM component".
I just started and I have no idea what to do about it!
Also, my Microsoft office is not working (all started at the same time) and this message appears when I open MS Word, Excel, etc. and when I click OK,
it closes automatically " Microsoft Office Home and Student 2010 cannot verify the license for this product. You should repair the Office program by using the Control Panel. I have tried to repair it and have un-installed and re-installed
it.
Any help is much appreciated!

Hi,
I suggest you perform a startup repair to fix this start issue, please refer to this link
http://windows.microsoft.com/en-IN/windows7/products/features/startup-repair
For the office issue, here are some workarounds, check if it can help you
http://helpdeskgeek.com/office-tips/fix-office-2010-cannot-verify-license-error-message/
And you can get more professional suggestions in this forum
http://social.technet.microsoft.com/Forums/en-US/home?category=officeitpro
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Regards
Yolanda
TechNet Community Support

I need help with a iphone that has me locked out can anyone help?

i have an old i phone that my daughter uses as an ipod she put a passcode on it and cant remeber the password so now its locked and says insert sim card so i asked the lady at at&t about it she said connect it to my computer and restore system settings but when i connect it to my computer it says cannot locate this phone insert sim card any suggestions on how to unlock this phone?

Put the iPhone into recovery mode and restore. To do this please see the links below....
http://support.apple.com/kb/ht1212
http://support.apple.com/kb/HT1414

Locked layer pasting glitch - HELP PLEASE!!

Hello,
My Adobe Illustrator CS3 appears to have picked up a glitch and I was looking for advice on how to remedy the situation:
When I try to paste on any layer, I get the:
You are attempting to paste or drag into one or more layers that are locked or hidden. Do you want to unlock and show all appropriate layers?
Thing is the layer I am on is not locked.
If I click okay it either opens a locked layer if there is one and pastes there, or creates a new layer - it varies.
I have restarted etc. and tried other documents but it always happens now. Even if I make a new blank document and start a fresh pasting elements.
Do I need to reinstall or is their simpler alternative?
Many thanks in advance
Anthony

Thank you, thanks you, thank you! So simple when you know how. This had me pulling my hair out - You have really helped me out.
Anthony

Iweb - Grayed out File menu - Help please!

Hi, I am traveling away from home on a 3 week trip. I started up iweb on the plane yesterday and it wouldn't let me start a new page, or add anything. It is all grayed out. Is there something I am doing wrong?
Problem is I don't have my ilife disk if I need to reload the software. Any way to fix this problem with out reloading? Anywhere I can get it online?
thanks,
Jess
PowerBook G4 Mac OS X (10.4.8) ilife '06 purchased in August

Hi jessica,
This could be a problem of not having the iweb 1.1.1 update.
Which do you have?
Also if you have the latest 1.1.2 but didn't get the 1.1.1.....welll go back and get 1.1.1
See if this helps or is even an issue w/ your setup.
Good luck
Please report back
jabberwock

Apple mobile device support was not installed on your computer, help please!

I bought iphone 6+ yesterday but when I connect it to the computer, itunes did not find it and there has no charging sign.
When I connect my iphone 4s to the computer, itunes detect it and the charging sign was there.
I thought it must be itunes' problem so I uninstall itunes and when I want to reinstall itunes, the problem came.
It start to rolling back action after copying new files.
Then I tried to uninstall appleapplicationsupport, bonjour, applemobiledevicesupport.
When I start to reinstall apple mobile device support, it encountered errors and start to rolling back.
Please help me!

Follow the instructions here for correctly removing and reinstalling iTunes: Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
If you don't have any of these operating systems there's a link on the page for XP.
If you have a Mac just drag the iTunes app from the Applications folder to trash, empty trash, then download and install a clean copy from http://apple.com/itunes.

6330v5.0 K7T TURBO2 Locking up. More help, please!!!

So I've built this PC:
--> 6330 v5.0 MOBO (flashed with latest bios)
--> AMD xp 2100+
--> 1500megs (3x512mg NCP pc-133)
--> Zalman copper heatsink and fan
--> 400w "enermax" PS
--> G3Ti200 Pro-VT128 (MS-8850)
--> Various hard drives (20-60GB) and CD-ROM drives
If anyone has any suggestions or comments about what bios settings to use, I'm all ears.
My computer persistently hangs in the middle of games and applications (especially games). It just stops responding and keeps the same screen from where it hung up.
It is possible that I have a sound card problem. I'll keep you posted. Writing this thread reminded me that I hadn't tried to remove that yet.
Later, and TIA.
the {PUNISHER}

Thanks for all your suggestions, unfortunately none of them solved my problem.
I previously had three hard drives in my system, but I now have only two.(both seagate, 1 20GB and 1 120GB)
I have also tried different ram in my system, and I have reinstalled my OS (Windows XP Pro).
I've updated drivers for damn near every piece of my system (video, sound, chipset, bios, cdrom drive bios), and ensured that my fsb jumper was set correctly.
I also bought a nice new THERMALTAKE xaser 2 case that has a ton of fans and a digital temp. probe, which I pushed up next to the base of my CPU's heatsink. It says that my system is running at 44C and the bios reports 47C. No heat problems, I guess.
I have optimized my bios settings for stability not performance. (no overclocking of anything).
On a whim, I decided to pull my old VOODOO 3 3000 videocard out of retirement and give it a shot at the prize. With an obvious downgrade in graphics quality and speed, it produced the exact same hang as my GeForce3. So, I guess that rules out video card problems.
Is it possible that by setting my FSB to 133 is pushing my AGP bus too far? I don't see a way in the bios to adjust the ratio of FSB freq. to AGP freq.
Thanks, again, in advance for any suggestions that you may have. Also, if you have any further questions about my situation, please feel free to email me [email protected] (6 underscores)

My iphone 4 automatic lock is not working help please

hi there
my iphone run out of charge very rapidaly and also turn it self off time to time , and when i set auto lock for example 1,2,5 ect minutes it does not work at all

Do you have a protective case on the iPhone, maybe it's interfering with the auto-lock?
If that isn't it, try restarting or restoring the iPhone.

Locked out of computer - Help please!

Similar Messages

Maybe you are looking for