Locked track problem

I have a locked track in a project in the new Garageband that I cannot unlock. Anyone else had this experience. If so, any solutions?

. I think there's a bug in the project because another of my tracks reduces its volume as the piece of music plays. It's bizarre, watching the volume slider move to the left of its own will!
The volume slider usually only moves on its own will, if there is a volume automation added to the track. Have you checked the automation curves on the track? Even with the track locked, you should be able to disable the automation.

Similar Messages

Premiere CS4, CS3 longer time to redraw locked tracks

Locked tracks on the Premiere timeline take a noticeably longer time to redraw than unlocked tracks when you zoom in and out of the timeline.
Premiere Pro CS3:
6 computers with different hardware (MB: all ASUS 775 Socket, GFX: all ASUS (Nvidia 7x series)).
Last premiere updates (3.2.0) installed
OSes: Windows XP SP2, SP3, Windows 7 RC.
Premiere Pro CS4:
1 computer with:
Microsoft Windows Vista Ultimate Service Pack 2
Internet Explorer 8.0.6001.18783
DirectX DirectX 10.1
QuadCore Intel Core 2 Quad Q9550, 2833 MHz (8.5 x 333)
Asus P5QL (3 PCI, 2 PCI-E x1, 1 PCI-E x16, 4 DDR2 DIMM, Audio, Gigabit LAN)
Intel Eaglelake P43
8192 Mb (DDR2-800 DDR2 SDRAM)
DIMM1: OCZ XTC Platinum OCZ2P8008GQ 2 Гб DDR2-800 DDR2 SDRAM (6-6-6-18 @ 400 МГц) (5-5-5-15 @ 333 МГц) (4-4-4-12 @ 266 МГц)
DIMM2: OCZ XTC Platinum OCZ2P8008GQ 2 Гб DDR2-800 DDR2 SDRAM (6-6-6-18 @ 400 МГц) (5-5-5-15 @ 333 МГц) (4-4-4-12 @ 266 МГц)
DIMM3: OCZ XTC Platinum OCZ2P8008GQ 2 Гб DDR2-800 DDR2 SDRAM (6-6-6-18 @ 400 МГц) (5-5-5-15 @ 333 МГц) (4-4-4-12 @ 266 МГц)
DIMM4: OCZ XTC Platinum OCZ2P8008GQ 2 Гб DDR2-800 DDR2 SDRAM (6-6-6-18 @ 400 МГц) (5-5-5-15 @ 333 МГц) (4-4-4-12 @ 266 МГц)
NVIDIA GeForce 8800 GTS (640 Мб)
Creative SB X-Fi XtremeMusic/Platinum Sound Card
SAMSUNG HD300LJ (300 Гб, 7200 RPM, SATA-II)
ST31000340AS (1000 Гб, 7200 RPM, SATA-II)
ST31000340AS (1000 Гб, 7200 RPM, SATA-II)
SMART - OK
C: (NTFS) 279.5 Gb (184.8 Gb free) - system, programs
D: (NTFS) 931.4 Gb (352.4 Gb free) - video sources (DV PAL)
F: (NTFS) 931.5 Gb (105.2 Gb free) - scratch, render, pagefile
Adobe Premiere Pro CS2 - no this problem.

7 different computers with different operating systems, drivers, settings and hardware - the problem is.
in the video - demonstrating problem
http://www.reporter73.tv/fex/PremiereProCS3-4Bug.avi (25 Mb)

How do I resolve LOCKED DISKS problem ? NO ACCESS ANYMORE !

Hello everybody,
I've looked carefully where to post this topic,
and I hope it's the right place here
(I have already been warned not to post the same questions in different places).
I have actually 2 internal volumes locked, 2 external Firewire volumes locked and 2 USB external volumes locked. I'm talking about *5,7 To* with *NO ACCESS* anymore.
It happened suddenly, and I was working on Snow Leopard 10.6.3 internal drive. This volume is the *only one* that has NOT been locked, but I lost a lot of applications, documents and so on on it.
Each of the locked volumes I am talking about shows,
in *Sharing & Permissions* (Get Info window),
the same Privileges :
— everyone : Custom
— admin : Custom
— olcha (Me) : Custom
— staff : Custom
— everyone (again) : Custom
You'll notice that "System" is not there (should be there with R+W),
and "admin" should have also R+W privilege.
I don't know why "staff" is here (perhaps, one day, somebody will explain to me the difference between : wheel, staff and admin).
I also don't know why "everyone" is there two times.
If I unlock the padlock (bottom right) with my password, I can only
check or uncheck the "Ignore ownership on this volume" square (bottom left).
Doing this (apparently) offers *no interest at all* to solve the problem
(and what does this function produce, when activated or not ?).
I can't *absolutely not* :
• Change *any privilege* of any of the 5 items ;
• Remove (with "-") any of these items ;
• Add a line (for example "System" or "wheel", why not ?)
but nothing new is shown after "+" making.
• The wheel (on the right of "+" and "-") shows only "revert changes" in grey.
I phoned immediately last thursday Apple Assistance,
and I am in contact with a Level 2 Apple Adviser who gave me his e-mail.
I sent him two messages, but he replied me that perhaps MONDAY
he could find the time to call me.
Now, first, please tell me if you have any idea or solution !
Thank you very much in advance.
Secondly, I have reflected on the solving,
and would like to know what you think about what follows :
You know that, in Disk Utility, you can erase a disk or partition.
If, in "Security Options…", I choose "Don't Erase Data", and then "Erase…" :
1) Sharing and Permissions will be changed and become (reset to) correct ;
2) It's said, in "Security Options…",
that "many commonly available disk recovery applications can restore that data".
I would be very glad that you indicate me :
1) the best application to use for that recovery ;
2) I already own "Drive Genius 3.0", "Data Rescue 3.0.2" and
(I think it's the best after a try on an internal 30 Go partition)
"Stellar Phoenix Macintosh Data Recovery".
Thank you in advance for your answers and advices,
With my kind regards
Olivier Herrbach
[email protected]
PS : Dear Forum Webmaster,
I would like to know :
1) if I posted this topic in the right place ;
2) if you allow me to post it elsewhere (and in this case, where ?) ;
3) is it possible to paste images in messages,
and, if yes, which format is needed (TIFF, png, jpeg …)
Thank you very much
Olivier Herrbach

Dear ChazBowie,
Here is the solution I've found for *LOCKED DISKS* problem.
I'll respond the shorter I can, avoiding for the moment to talk about the complicated solutions
that Apple gave to me, which involved volume by volume (only one each time) intervention, and were working by, each time, entering one line, password, then another line in Terminal. I will communicate these instructions later, but they do not need to be publicated here with urgence.
I found two little free softwares that can modify *ALL Privileges* in Sharing and Permissions, *on ANYTHING*. You will have to be careful using them, as they even allow to act as "Root" administrator.
I'd also like everyone to *donate anything* to these helpful developers, and I'd be very pleased to have *your feedback and results*.
••• 1) — *BatChmod 1.6.2* (162), written by a compatriot, Renaud Boisjoly.
E-mail (if you have doubts or questions) : [email protected]
Free software downloading site : *http://www.macchampion.com/arbysoft*
(excuse me, but I don't know how to make a link here).
••• 2) — *FileXaminer 2.7*, recommended by Renaud himself.
Dear ChazBowie,
Here is the solution I've found for *LOCKED DISKS* problem.
I'll respond the shorter I can, avoiding for the moment to talk about the complicated solutions
that Apple gave to me, which involved volume by volume (only one each time) intervention, and were working by, each time, entering one line, password, then another line in Terminal. I will communicate these instructions later, but they do not need to be publicated here with urgence.
I found two little free softwares that can modify *ALL Privileges* in Sharing and Permissions, *on ANYTHING*. You will have to be careful using them, as they even allow to act as "Root" administrator.
I'd also like everyone to *donate anything* to these helpful developers, and I'd be very pleased to have *your feedback and results*.
••• 1) — *BatChmod 1.6.2* (162), written by a compatriot, Renaud Boisjoly.
E-mail (if you have doubts or questions) : [email protected]
Free software downloading site : Gideon Softworks : *http://www.gideonsoftworks.com/*
I won't copy here the texts that are on both sites, but it's very instructive.
Remember that the applications don't only work on files and folders,
*but also on disks attributes*.
You'll also have some work to do (I don't remember, perhaps not), by going in the Get Info windows
and changing privileges to the correct ones, that means you must know
(I'm not sure, verify please) what privileges are to be set for a volume
(YOU WILL HAVE ACCESS TO THEM, AND CHANGES YOU MAKE WON'T BE RESET TO "CUSTOM").
Does anybody know something about the "Ignore ownership on this volume" checkbox ?
*I always uncheck it*.
I would also like very much to know the differences between the two-headed iconed groups :
"staff", "wheel" and "admin", and IN THE END know *WHERE are the rules* you have to observe
when doing changes in privileges (for example, I don't want to give my password to copy something in Users folder, nor "MyName" folder. I've changed that without, I hope, having created any dysfunction).
Please tell me if you know anything about these 2 subjects above.
I'm very glad if my informations have been useful/helpful.
With my kind regards,
Olivier Herrbach

Row lock contention problem on Inventory Management

Hi
My client is product based company and have e-Commerce (online Sale Order) application using Oracle database 10.2.0.5 & Web application deployed on WLS. Client have ~ 90 Warehouse country wide and ~ 200 Products (Items). Each product stock for each warehouse is maintained in Inventory Table (INV_BALANCE) which get updated for each order and their sale's products. We are using NO WAIT function to acquire lock on row to update stock balance. Last few months, client business is growing very fast and during Promotional Events (EXPO), they have sales of ~ 75K orders (~ 250K Items) within 2-3 days which start causing row lock contention problem on INV_BALANCE table. We are seeing lots of "Row Lock Wait" and "enq: TX - row lock contention" event which cause ORA-00060: Deadlock detected and we need to eventually clear blocking sessions or everything just choked.
select statistic_name,value from sys.v_$segment_statistics where object_name = 'INV_BALANCE'
STATISTIC_NAME                                                                                                                        VALUE
logical reads                                                                                                                                12423072
buffer busy waits                                                                                                                           3895
db block changes                                                                                                                         3516768
physical reads                                                                                                                               957
physical writes                                                                                                                            12197
row lock waits                                                                                                                             49909
space used                                                                                                                                -52921
Deadlock graph:
                       ---------Blocker(s)-------- ---------Waiter(s)---------
Resource Name          process session holds waits process session holds waits
TX-00880017-00002584       321    1675     X            110    1445           X
TX-00b60008-00000741       110    1445     X            337    2158           X
TX-0148000b-0000009e       337    2158     X            378    1525           X
TX-01d50015-0000006f       378    1525     X            363    1842           X
TX-02290012-00000070       363    1842     X            267    1798           X
TX-024a0026-0000006e       267    1798     X            364    2084           X
TX-020a0004-0000006f       364    2084     X            135    2113           X
TX-01dc001f-00000070       135    2113     X            129    1586           X
session 1675: DID 0001-0141-000001CA    session 1445: DID 0001-006E-00000202
session 1445: DID 0001-006E-00000202    session 2158: DID 0001-0151-0000026B
session 2158: DID 0001-0151-0000026B    session 1525: DID 0001-017A-00000167
session 1525: DID 0001-017A-00000167    session 1842: DID 0001-016B-000002B4
session 1842: DID 0001-016B-000002B4    session 1798: DID 0001-010B-000001F1
Rows waited on:
Session 1445: obj - rowid = 0001AE0E - AAAlK8AAHAAD7rMABY
(dictionary objn - 110094, file - 7, block - 1030860, slot - 88)
Session 2158: obj - rowid = 0001AE0E - AAAlK8AAHAAD7rMACD
(dictionary objn - 110094, file - 7, block - 1030860, slot - 131)
Session 1525: obj - rowid = 0001AE0E - AAAlK8AAHAAD7rOAB2
(dictionary objn - 110094, file - 7, block - 1030862, slot - 118)
Information on the OTHER waiting sessions:
Session 1445:
sid: 1445 ser: 37 audsid: 38316795 user: 69/<none>
            program: JDBC Thin Client
application name: JDBC Thin Client, hash value=2546894660
Current SQL Statement:
SELECT ROWID, NVL(QTY_PEND,0)+NVL(:B3 ,0) FROM INV_BALANCE WHERE WHS_ID = :B2 AND STOCK_ID = :B1 FOR UPDATE OF QTY_PEND WAIT 10
Please help me on following
Q1: How can we reduce the "row lock Contention" on INV_BALANCE, all possible ways & best practices?
Q2: How can we change the design to not have "row lock Contention" at all?
Appreciate your help
Thanks
Amit Garg
www.otnblogs.com

Hi Amit!
I saw you are using FOR UPDATE in your query.
If you want reduce row locks, then you not must use FOR UPDATE.
As you know, FOR UPDATE is locking rows.
Regards
Mahir M. Quluzade

Is it possible to lock tracks on Premiere Elements 11? Overwriting clips?

Hi,
From what I can see/have read it is not possible to lock tracks whilst editing on Premiere Elements 11 - is that right?
I am a new user and have been finding that as I'm moving clips around the timeline it seems very unpredictable as to whether the clip slots into place without affecting the position of everything else or whether it creates a cut in the soundtrack leaving an empty space, or whether it just shifts things up.
Essentially I want to know how to overwrite clips (ie. when I drag a clip in, everything else on the timeline stays in the same place)
I'm assuming that this means that there is a method to do all of these things but I appear to have done them all by accident and can't work out the method!
Any help much appreciated. Thanks!

Holding down the Ctrl key (or the Cmd key on a Mac) as you add new clips to the timeline will keep everything on the timeline in place and override the ripple feature.

Apart from the lock button problem in iphone 5 the display brightness suddenly goes blank and becomes normal after locking and unlocking the iphone. The Apple service centre in India is denying to service the iphone as it was purchase in USA even thoug it

Apart from the lock button problem in iphone 5 the display brightness suddenly goes blank and becomes normal after locking and unlocking the iphone. The Apple service centre in India is denying to service the iphone as it was purchase in USA even though the iphone is in warranty.

iPhones do not have an international warranty. Warranty is valid only for the country of purchase. This is most likely because different countries require different iPhone models. Not reasonable to expect all countries to maintain stock for all models.

Tracking problem?

I am working with tracking problem. I am somewhat new to VC++. I have to take several data from the position sensor and read in the PLC and feed the data to the motor to run. That is fine.
But the problem arises when I receive the data from position sensor within a range between +5% of the standard value or -5% of the standard value. If the data value exceeds the range, I want an error message to pop-up.
How can develop this code in VC++?

Hi KRAZE4LV,
You could use an if statement to check whether the data is outside of the range or not. When the data is outside the range, you can then call the message pop up box. I've included an example link below for you reference.
http://msdn.microsoft.com/en-us/library/aa381915%28v=vs.85%29.aspx
I hope this helps.
Regards,
Josh L.
Applications Engineer
National Instruments

Locking datafile problem using oracle agent

Hi All
we are facing locking datafile problems when we are taking backups using oracle agent
in veritas we have selected the option not to lock files when taking backups
is there any other settng which we have missed so that it doe s not lock files
regards
kedar

If you use a version locking policy, you should use a version field, not reuse your primary key for that. If you map the version field (you don't have to), you need to map it as read only. This makes sense: you don't want the application to change this version field, only TopLink should change it. This is where your exception comes from.
If you want to use existing database fields for optimistic locking, you should use a field locking policy. It does not make sense to use the primary key for that: it never changes, so you never know when the object has been changed by another user.
So you can do two things now to fix your code:
create a version column in your database and use a version policy (preferably numeric) or use a field locking policy and use job and salary, or all fields)
There is a pretty good description of locking policies in the TopLink guide:
http://www.oracle.com/technology/products/ias/toplink/doc/10131/main/_html/descun008.htm#CIHCFEIB
Hope this helps,
Lonneke

Locked file problem with WebDAV

I am using DreamWeaver CS3 on my Macintosh at home and on a
PC at work. I am connecting to my website via WebDAV, and for some
reason Dreamweaver cannot edit the files on the site. When I try to
check out any file I get an error stating: "file.html is locked and
can be viewed but not edited" I then have the option to check it
out or view or cancel. Regardless of what I do, if I continue and
open the file and make changes the file will not get updated on the
remote server even though Dreamweaver reports a successful "put" or
"check in" command in the log file. This happens on both the
Macintosh and the Windows PC. Both are also updated to the latest
versions of Dreamweaver.
The strange thing is, if I mount the WebDAV server as a
filesystem on my macintosh and authenticate with the same
login/password that entered in Dreamweaver's WebDAV settings, I can
edit the html files using a text editor and they save perfectly
fine. Additionally, while the web server is mounted on the desktop,
if I change Dreamweaver's site settings to "local/network" and
enter the locally mounted WebDAV share path instead of using
Dreamweaver's built-in WebDAV client, then everything works
properly in Dreamweaver. Reverting back to using WebDAV in
dreamweaver (as opposed to through the OS) brings about the same
"locked file" problem as before.
There appears to be a problem with Dreamweaver's WebDAV
access to the site, and I'm wondering if there's an easy fix or if
this has been experienced by others?
Thanks,
-Topher

Have a look at FileUtils::DecomposeUnicode and NormalizeUnComposedUnicodeChars. Use the first to convert before using i.e. FileUtils::PMStringToSysFile() and the later afetr i.e. FileUtils::IDFileToPMString().
HTH

Mighty Mouse Tracking Problems with Mac mini core duo

I have a new Mac mini core duo (2GB RAM, 100GB HDD) and I'm having problems with my USB Might Mouse.
The cursor stutters and doesn't track with the movement of the mouse and it will sometimes leap to a different part of the screen or get stuck at the last place it rested. At other times the mouse will track smoothly for a while before starting to stutter again. The behavior isn't consistent.
Is anybody else having tracking problems?
Any thoughts on what might be causing this behavior?
iMac G5 20 & Mac mini 1.42Ghz, PB G4 1.67Mhz, Mac mini core duo Mac OS X (10.4.6)

Hmm, this could be one of two things. Your mac might be faulty (Harware wise) which would suck. But, hopefully it is a problem with your drivers that need updating. Try these 3 options.
1. Update you mouse driver.
2. Update you video card driver (Video cards can sometimes affect mouse sensitivety -don't ask why)
3. This is my last solution, before consulting a technician (For money if you can do it free talk to one!) or returning your mini: Try reformating/reinstalling Max OSX and if u have bootcamp check out wat happens to the mouse in XP check for the same problem if it doesn't happen in XP your hardware is safe. IF the problem continues after this... looks like your hardware is bad in that case i recomend a return or send back (If your on warranty).
GOod luck,
Wannabe

KT3 Ultra2, XP2200+ lock up problems.

Hello there, I am having a lock up problem with my PC.
System Info;
MSI KT3 Ultra2 (6380E) (Non RAID)
Athlon XP 2200+ (.013 micron TB)
Enermax 350 Watt PS
Samsung PC2700 DDR (512MB)
Thermaltake Volcano 7 CPU cooler
Nvidia Riva TNT2 Ultra
And I am running Windows 2000 PRO.
Bios shows to be version 1 (I don't know how to check the version correctly) FSB is set to 133mhz. The PC runns stabile when set to 100mhx FSB, but when swithed back to 133, It locks while trying to run programs such as Norton AV 2003 , or SETI@home. Have not tried gaming yet do to this problem. Note too that in WIndows system info, processor shows to be AMD 1800+. Any advice would be greatly appriciated!! Thanks!! Jeepin_247 ;(

Those temps are definitly getting high. I can loop 3dmark for an hour and still only get up to about 43 c. If I understand you correctly you are running your cooler without and gease or thermal pad between your cpu die and cooler. That can definitly cause problems with heat transfer. I imagine your temperatures are continuing to rise a little causing lock ups. Apply some grease when you get it and your temps should drop a bit. A lot of people swear by artic silver. I am just using the standard gease that came with my cooler and it is working fine. I would probally use the artic silver if I started overclocking though.
There is a good sticky for bios settings in the MSI section at http://www.amdforums.com There sight is down right now so I can't provide the link. The setting are for the KT3-aru but they are good for the KT3 Ultra2.
Good Luck.

HT5957 iso 7.0.2 continue have lock screen problem in my iphone 4s.

continue have lock screen problem in my iphone 4s.

I have got same problem.7.0.2 lock screen bug,i can access my photos from lock screen

Auto lock tracks?

Is there an option so that all tracks are automatically locked in time once created?

If you are actually talking about locking tracks at the time they are created then I have to agree with SteveG but if you actually mean to have an option to have recorded clips locked as they are recorded then I would have to agree that this would be essential
And before anyone asks - it makes sense because that is the point on the timeline that you are recording so clearly that is the point in time that you want the clip to be (at least for the moment)

"locked" track info?

Alrighty. I just got a new computer and I spent the past couple hours copying all my old information into it, yadda yadda.
iTunes was installed and I got all my music into it, and things were going swell.
WHEN SUDDENLY!
iTunes decided to no longer allow me to edit anything about any song. I try to change the titles, nothing happens. I try to change the albums, nothing happens. I can't even change the genre. I tried clicking in each section of the track description on the track list, both double-clicking, slow double-clicking, right-clicking, etc...
My friend suggested I opened the information on the songs individually, but when I did that, the entire information tab was locked.
How do I fix this problem? ;__; I was so happy with this whole escapade with my new machine until it betrayed me and stopped recognizing me as master. XD
Thanks a lot in advance. <3
Message was edited by: Hagglefish

PROBLEM SOLVED!!!
Here's what I did:
I figured that downgrading to a previous itunes version might work, so I went to filehippo.com and tried to download 7.4. On the first attempt at this, I received an error message saying that it could not be installed because a later version (7.5) was already installed. So I knew then that in order for this to work I would have to uninstall the itunes application. Because I was afriad that doing so might permanently delete all of my playlists and song play counts, I created a system restore point before performing the uninstallation (it ended up being unnecessary). So then I uninstalled itunes and restarted my computer to make that take effect. After restarting I went back to filehippo and downloaded and installed 7.4. I opened up itunes 7.4 and all of my playlists were intact. When I clicked get info on the songs whose titles didn't download, the titles suddenly appeared. I am able to edit all song info now with 7.4.

Display and lock up problems with 3 week old MBP!!!

Hi all,
I hope that someone here can help with a scary problem that I have experienced with my (otherwise perfect!!) MBP!!
Occasionally, so far always after a boot up or wake up (but never on the login screen!), the MBP will lock up completely and the display will become corrupted as in the images I have posted below (fingers crossed!)!
As I said, it locks up the MBP so that the only action I can take is to force a reboot by pressing the On/Off button for the required amount of time.
I took the MBP to an Apple shop after making an appointment with a Genius (wonderful, lovely Spanish girl, name of Eva!!!!). Sadly, as the symptoms could not be recreated in the shop there was not a lot Eva could do, she did recommend a re-install of OS X, and also suggested that I let them have the MBP for a day so that they could hook it up to something (for a full eight hours!!) or other and test it. Eva did say that she had not seen the problem before (I took my camera to the shop and showed her the pics of the screen), but that it did not look good!!
So, I decided to take it back home and ask for help here!!!!
Any advice would be welcome!!!
Screenshot 1...
Screenshot 2...
Regards
Blakey

i would go back and show them these pics, also try doing stuff that is graphics intensive, my guess is that you have a bad video card, doing things that heat it up should get it to happen
one thing that you can use stress the vid car is the opengl example programs included with XCode (its included with the programs on the CD that came with the computer), so i recommend opening a few of those, and then doing a few `yes>/dev/null` in the terminal, also make the window semi-transparent, and put it on top of quicktime playing some movies, that should help stress the video card and put extra heat on it
if you can get that to consistently cause the problem then take it back to Apple

Locked track problem

Similar Messages

Maybe you are looking for