Locking for good new plug-ins.

I'll appreciate if someone can recommend me some good plug-ins except the Native Instruments collection since I already have them...
Thanks in advance...

Covered numerous times here. Here's some, plenty more using the forum search...
http://discussions.apple.com/thread.jspa?messageID=5167708&#5167708
http://discussions.apple.com/thread.jspa?messageID=3834716&#3834716
http://discussions.apple.com/thread.jspa?messageID=4521350&#4521350

Similar Messages

Why is Firefox is crashing on opening. I have not installed any new plug-ins etc. since last using it successfully. I have attempted to open in safe mode but without success. Crash ID: bp-91282c25-7a56-4137-a436-ac0312111019

I have not installed any new plug-ins etc. since last using it successfully.

Further info
Please follow the instructions in the article from the above post. In fct you have a second suspicious file showing on your report so look specifically at and scan files ''gblrofmx.dll'' & ''sprotector.dll''
If possible I suggest you quarantine the files rather than deleting them immediately. Also note that you may need to start Windows in safe mode (or Windows safemode with network access) in order to find and move or delete the files.
* Use F8 to access Windows safe mode <br /> http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode <br />http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
For forum cross referencing purposes
* Report for CrashID [https://crash-stats.mozilla.com/report/index/27aa708f-12d0-4b17-ac96-0961a2130115 27aa708f-12d0-4b17-ac96-0961a2130115]
** Crash Signature: nsInputStreamPump::OnInputStreamReady(nsIAsyncInputStream*)
** related bug 801394, and contributors thread [https://support.mozilla.org/en-US/forums/contributors/708895 nsInputStreamPump::OnInputStreamReady Crashes (Malware)]
** files without ID ''RocketDock.dll , gblrofmx.dll , sprotector.dll''
* sprotector.dll some suspicions about this being possible malware trojan <br />''Bug 785940 - Firefox startup crash in SECMOD_GetModuleSpecList @ __hash_open with SProtector.dll (Safend Protector, Sophos SafeGuard or TrojanDownloader:HTML/Sprotector.A?) ''<br /> thread [/questions/937251 Firefox crashes]
* gblrofmx.dll likely to be the malware responsible for current crashes

What is the best security lock for the new 21 inch imac?

I want to know what is the best security lock for the new 21 inch imac?

Most computers refer to the locking attachment in some relationship to the name "Kensington", and that might be a useful clue.
Following that, be sure to avoid counterfeit products. A well-known computer vendor (not Apple), was approached by a large purchaser (several tens of thousands of laptops) who insisted on using a counterfeit locking product that had a larger than normal locking tab. The vendor modified the tooling to accept the counterfeit product and, wouldn't you know it, the genuine product would no longer secure the computer properly.

Are there new plug-ins for my PowerBook G-4 to allow me to see utube and other videos?

Are there plug-ins for me to view videos and Utube videos? I am unable suddently to view either. Help!

I did go to the website and downloaded the adobe-flash. I also read the "read me" but I'm not sure I understood exactly what to do. I removed the old flash-player in the Library/Internet Plug-ins folder and just put it on my desktop; not sure what really to do with it. Instructions said to back it up, but I don't know how to do that. Should I have trashed it??? Then I closed the browser (Firefox); reopened it and went back to the site to see if has been installed correctly (I guess no); couldn't see the video and tested it again at uTube.
When attempting to play a uTube video, it asked me what "player". Looked in the Apps folder to see what I had: Quicktime, Real Time, and Windows Media Player. None worked. I'm still at a loss. I'm not a savvy tech person, so I might need more instruction if you're willing to help Texas Mac Man (I'm in TX, too).
One more thing, to put in the new plug-in, I just did a drag and drop into the folder.
What have I missed? I appreciate your help very much. This is my first time on the Support Communities.
Message was edited by: Joanne7648

Acrobat X support for older version plug-ins

Hi,
        We have some plug-ins, which were created for acrobat version 7, later we upgraded them to support acrobat 8, and 9 also.
         Now with the release of acrobat X, we want to support this latest version also, is it possible to support all the versions(acrobat 7 through acrobat X)?
        and if it is possible, for doing so, what additional changes required from implementation/development point fo view.
       Can anybody give elobarated details please,
waiting for reply,
thanks in advance,

Adobe no longer supports Acrobat 7 - so I can't comment on that.
However, building a plugin FOR WINDOWS - that works on Acrobat 8-X is no problem. You simply need to use the Acrobat 8 SDK and be aware that you can't use any newer APIs.
On the Mac, however, it's a problem due to changes in their architecture with 8->9. Acrobat 9 & X share the same plugins.

Soundtrack Pro not loading because of new plug ins

Hi I recently got a Waves bundle that consists of about 300 hundred plug ins to use in logic,only thing now is when I go to load up soundtrack it starts loading them into the program an freezes after loading a couple of hundred.I have tried to load up Soundtrack for the last week or so an the same thing happens each time and every time I have to reboot the mac as it wont let me quit or force quit.So what I would like to know is there anyway I can avoid having to load these plug ins into soundtrack as I dont even need to use these plug ins in the program or any advice to fix this annoying problem!
many thanks

If STP freezes, do you see the name of the plugin it's trying to load? It might be just one out of all of those that is causing trouble, and if you can see the name, you can remove it from your Components folder when working in STP, and move it back when you need it to be available in other apps.
You must have paid a bundle for that bundle (pardon the pun), so you should also go to the Waves people and check with them.
Good luck!

New plug ins? new menue

Does any one know where to get new (free) plug ins for idvd

Here are some free themes:
http://www.dvdthemepak.com/free.html
http://www.mydigitalworks.com/com/pages/idvd/themes/default.asp
other themes (not free):
http://www.idvdthemes.com/products.php
http://www.idvdthemepak.com/order_update.html
Hopefully this helps.

Recommend good filters / Plug-ins?

I am looking to build a good collection of Photoshop Plug-ins. Particularly image manipulation ones. I already have the Alien Skin suite and the three from Berg Design (peel off white, grey to white and grey to black). I am looking for high end professional ones. No amateur looking ripple effect or lame edge treatments.
Anyone have any gems out there?

No specific task. I do high end photo finishing, compositing and manipulation in the entertainment key art industry. So just looking for programs to ease some effects. Give me a decent base to build from. Nothing out there produces anything that is ready to go. But Alien Skin for example, can produce decent effects that can be further customized and painted on to get photorealistic results.
So looking for more stuff like that. Or stuff that can improve my process.

Installer for a new plug-in.

Hi All,
I made my first plug-in for InDesign. It supposed to be free for users.
Now I try to make an installer of my plug-in for CS3 and CS4.
Is there any official way to find out exact path to folder "Plug-Ins" for each version of InDesign?
This task looks very common but I can not find any information in Forum or InDesign Developer Knowledgebase.
Your links or explanations will be very appreciated.
Thank you,
Sofia

If this is on a Mac, and you are only installing one plugin, the current fashion is to do a "Drag and Drop Install" from a mounted disk image volume. Yes, the users would have to locate the Plug-Ins folder themselves. Installers are now recommended only for complex installs such as drivers or software suite with multiple files in multiple locations.
Since Apple standardized /Application folder on X. It should be safe to look for the folder here for CS3:
/Application/Adobe InDesign CS3/Plug-Ins/
If you can't find it, you would have to ask the user. Otherwise, you would need to make some OS calls (Launch Services or even Spotlight?) to ask for the location of InDesign.
On the other hand, I don't know if Adobe would localize the folder name during installation. My guess is, it should not.
I have no idea for Windows.
pete

VI Search Path not working in LV2011 for VI Server Plug-ins with exe

I have found what seems to be a problem with the search path when a LabVIEW 2011 built executable calls a Plug-in VI.
When the plug-in VI has subVI’s from vi.lib on its diagram the executable has to know where to find them. Not all VI’s in vi.lib are part of the run time engine or the dll’s that may get generated as part of the build. The things you have to do to make plug-ins work for an executable are explained in several Developer Zone articles. The article titled “How Can I Change or Set the VI Search Path for LabVIEW Executables” describes the ini file setting viSearchPath. When this is set to the vi.lib directory I have not encountered problems with previous versions up to and including LabVIEW 2010.
I have come across an example in LabVIEW 2011 where it doesn’t work. I have attached an example (I am using LV2011 SP1). It demonstrates the basic plug-in architecture. Everything works in the development environment. But it doesn’t work from a built exe. I haven’t included the actual built exe in the zip file in case that causes a problem downloading it. If you run the build spec from the src directory project file the exe should get generated in the bld directory. The problem appears to occur when certain VIs from the analysis library are in the Plug-in. In the example attached, the Plug-in VI is very simple but I have placed the troublesome SubVI on the diagram. The VI in this example where there is a problem finding it is the Butterworth Filter VI. I have placed it on the diagram in a conditional disable structure so it is easy to enable and disable. When enabled and you run the test Plug-in VI the error 1003 is raised, meaning a subVI cannot be found in the dynamically called VI (for example see this post). Note that a way round this may be to incorporate the Plug-in VI into the built exe but this shouldn't be necessary. It’s not a problem with this specific filter VI, as it occurs for other VIs I try on the diagram. However if you place an FFT VI on the diagram there is no problem. I suspect that one is built into the Run-Time Engine.
I also note I am running Win7 64 bit and 32 bit LabVIEW (note the relevant viSearchPath in the ini file – you may need to change if you are on different version of Windows). If the example is converted to LabVIEW 2010 everything works as expected for the built exe. I tried that on a colleague’s computer running XP and 2010 but I am pretty sure in still also works on Win 7.
Things I am suspicious of are that the analysis VI’s are part of a LabVIEW library (lvlib) and perhaps something has changed there? I understand there is a problem with OOP in LabVIEW 2011. Perhaps it is related to that as that seems to be an issue in 2011 (see this Discussion Forum post). Perhaps it is related to OS version?
I also tried generating a Source Distribution to extract out all the vi.lib VI’s and place them directly in the Plug-in directory. That didn’t help.
Interested in whether anyone else reproduces this behaviour. In any case something is different in 2011.
Attachments:
LV 2011 test Plug-in.zip ‏42 KB

I found some more out about this issue working with my local NI rep here in Australia. Apparently something has changed in the compiler between LabVIEW 2010 and 2011. Using the viSearchPath token in the ini file, as described in various Developer Zone articles, now guarantees that the Plug-in will not work. The only way to make it work appears to be to create a Source Distribution. I noted in my original post that I had already tried this and it would not work. It turns out that having the viSearchPath token in the ini file when using a Source Distribution causes the error 1003 to occur. When the token is taken out of the ini file the Plug-in (containing an analysis VI) with a Source Distribution works - in the simple example I posted.
Well I then found its a bit more complicated than this. It all worked for the simple example I posted. Recall we found the error when there was an analysis VI in the Plug-in VI. In our actual application (which is a large one) that calls Plug-ins - we still got the error 1003. By trial and error I found a workaround. There are certain Build Spec settings for the calling exe that I set and found worked. On the Additional Exclusions page I found that I had to make sure that I left unchecked "Modify Project Library File after removing unused members". I've always had trouble understanding the need for this setting. In the Build Spec Help on that page it notes that the build will take longer. In most builds you remove polymorphic VI instances, remove unused members of Project libraries and also Modify the project library file after removing the instances (this is a sub setting of the previous). This makes the exe smaller in size and a quicker build time. Obviously modifying the project library caused a problem. In the big application exe calling Plug-in, I probably have the same analysis VI on the diagram (I haven't actually checked and also whether it is the same polymorphic instance) and in the simple example I posted I definitely did not have VI in the calling exe example - so there may be some clue there. I should try putting the same analysis VI on the calling exe diagram in the simple example to see what happens but I'm running out of energy on this one :-(
So none of this gives me much confidence and I wish I could get a better explanation from NI regarding this behaviour to be sure I am not going to encounter a different problem for different calling exe and Plug-ins. I was advised that a CAR would be issued. Perhaps this is now expected behaviour for 2011 but it would helpful if some definitive explanation could be given about what has changed from LV2010. And an update of Developer Zone articles on the subject would be helpful.

Fcp looking for non-existent plug ins

i installed some demo audio units plug-ins a while back and didn't like them so i deleted them.
i just had to re-install FCP and now, every time i launch, it looks for each and every one of the audio units. i have to click cancel like forty times to start the program. i've thrown away my prefs, reinstalled the prgram, thrown away all the install receipts, made sure the audio untis are gone etc. I also use Logic Pro as well (that's what the audio units were originally intended for)
thanks
specs: apple g5 dual, tiger os 10.4.3, FCP HD 4.5

look in /Library/Application Support/Final Cut Pro System Support/Plugins/
and ~/Library/Preferences/Final Cut Pro User Data/Plugins

Why does my Extras window keeps asking me to reload the Firefox window and not uploading my new plug ins even after I've reloaded it already?

I have installed new versions of my plug ins and reloaded the Firefox page, but I noticed one of them wasn't working (the United States English Spellchecker 5.0.0) so I reinstalled it and rebooted the page once again. But it's not working and no matter how many times I reboot the page, it still asks me to do it. What can I do to solve this problem?
This is the first time it has happened.

This can happen if one of the files that stores details of installed extensions is corrupt. Try deleting those files as shown in the corrupt extension files section of the [[Unable to install add-ons#Corrupt extension files|unable to install add-ons]] article.

Suggestions for third party plug-ins

I’m looking into purchasing some third party filters soon. I’m into special events like anniversaries, weddings, High School events like sports seasons, musicals, etc.
What are the third party plug-ins or filters that you would recommend?
Hank Kearns

For what purpose?
In other words, what effects are you trying to make?
I’m slowly learning more about Final Cut Pro and editing. I do not have any specific need right now. Perhaps I should have asked what are the effects that the more experienced users have found useful.
Here is an example of a effect produced by chv that was posted on Ken Stone’s Discussion List. The contributor I believe is the creator of the plug-in.
<http://www.chv-plugins.com/tmp/Ken-3D-Cube-Demo.mov>
Right now I do not have a need for something like that, but it would be nice to have to potential of creating something like this when needed.
Hank

Looking for Aperture effects plug-ins

I am looking for plug-ins for Aperture that will allow me different effects that I can apply to my photos directly in Aperture

This is something I am using:
http://www.apertureeffects.com/
but also presets will work as you described:
http://www.appleaperturepresets.net/
and
http://www.aperture-presets.com/
Hope it helps!

Which is the right plug-in for youtube & chatroom plug-ins?

Had to stop using desktop due to home repairs. When I attempted to re-connect desktop, I was & am not able to find right plug-in for chat rooms or youtube.
Ive downloaded several Adobe Flash Player, Quick Time, windows media and Java plug ins and nothing works.
Please advise
Thank you
Bea

About Safari 5.1.7 and Leopard Security Update 2012-003
Summary
Learn about Safari 5.1.7 and Leopard Security Update 2012-003.
Products Affected
Mac OS X 10.5, Product Security, Safari 5.1 (Mac OS X 10.6), Safari 5.1 (OS X Lion)
Safari 5.1.7 for OS X Lion, Safari 5.1.7 for OS X Snow Leopard, and Leopard Security Update 2012-003 disable out-of-date versions of Adobe Flash Player.
Out-of-date versions of Adobe Flash Player do not include the latest security updates and will be disabled to help keep your Mac secure. If Safari 5.1.7 or Leopard Security Update 2012-003 detects an out-of-date version of Flash Player on your system, you will see a dialog informing you that Flash Player has been disabled. The dialog provides the option to go directly to Adobe's website, where you can download and install an updated version of Flash Player.
Additional Information
If you need to re-enable an out-of-date version of Flash Player, you can do the following:
Navigate to the /Library/Internet Plug-Ins (Disabled) folder.
Drag "Flash Player.plugin" into /Library/Internet Plug-Ins.
If the browser is running, quit and restart it.
http://support.apple.com/kb/HT5271
http://support.apple.com/kb/HT5655

Locking for good new plug-ins.

Similar Messages

Maybe you are looking for