Locking on Navigation attributes
Hi All,
Is there a way to include navigational attributes as a locking criteria in IP?
Thanks,
Ajay
Edited by: Ajay Chauhan on Jan 22, 2008 2:51 PM
Hi Ajay,
yes this is possible: you can make navigation attributes lock relevant in the expert mode of transaction RSPLSE, cf. last section of note 928044.
Regards,
Gregor
Similar Messages
-
Navigational attribute data not visible in BEx Report
Hello All,
I am facing following problem in one of my BEx reports:
I am fetching data from an ODS. With other columns of ODS, I have also to show few navigational attributes( which are master data of some info-object) . In report the corresponding data in navigational attributes is not visible for few records, although when I see the master data of this Info-object (whose navigational attributes I have to include), in Adm. Wrkbench the data is visible. I wonder what step is missing.
Many Thanks for helping me out.
Best Regards,
SumitaHi Roberto,
While trying to activate the Infoobject's master data (by right-click) I get the following message,
"Lock NOT set for: Loading master data attributes"
And the data is not activated.
Can you please suggest what needs to be done.
Thanks & Regards,
Sumita -
Authorization Relevant BI Navigational Attribute
Hello All,
I have one quick question on auth relevant navigational attributes.
Say I have characteristics A and B. B is a nav attribute of A i.e. A__B and is marked auth relevant.
Does this means that A will also have to marked as auth relevant and be placed in the RSECADMIN profile along with A__B?
Thanks> I have one quick question
I have one quick answer...
> Total Questions: 6 (6 unresolved)
Read the forum rules!
Thread locked and duplicate deleted. -
Restrict on Navigation attribute in Integrated Planning
Hello,
I have created an Aggregation Level on the Multiprovider(combines Actual and Plan) and I have created a ready to input query on the multi provider. The query works fine for planning.
However, I would like to restrict the query to show only few accounts. Account type is the navigational attribute on the Sold to party and I want to restrict only the Sold to party of Account type 1 2 3 & 4. When I restrict that in the query the Planned values are not editable. I am not able to input the planned values. I am able to input when I take the navigational attribute away in the query.
Could anyone of you please help me with this. Could anyone please let me know the steps to use the navigational attribute in the input ready query or Integrated Planning
thanks,
KKHi,
As Sven has mentioned has mentioned you can lock each record by having a characteristic "0createdby".
But you have to create a characteristic relationship of type "Exit" where in you write a small piece of ABAP code to generate the value of "0createdby", when the end user tries saving a reocrd in to the planning cube.
Kindly refer to the following link for more details on characteristic relationship,
http://help.sap.com/saphelp_nw70/helpdata/en/43/1c3d0f31b70701e10000000a422035/frameset.htm
Regards,
Balajee -
Unable to view Navigational Attributes in ODS
Dear All,
We have enabled Material Group as Navigational Attribute in Material. Material has been included in ODS as Key Field. In ODS also Material Group is switched as Nav Attr. Now when I check in Reports I am getting # for all Material Groups. I checked in ListCube. Here also I am getting # values.
I did master Data Activation and also did Attribute change run. Where as I am able to view values for Material Group in Material Master Data.
Regards
Ravi YHi Ravi,
You could check if the X/Y table of material group are correct.
Do RSRV combination check on the info object material and material group. Run all the tests...espeially the consistency of X and Y tables..
Also, you could probably check if this is some authorization issue... that you dont have authorization to view contents of material group...(may not be the case, but worth a check )...
Sounds strange though, if all is ok and u still dont see material group. (and sometimes it cud be a refresh issue as lalit suggests....., if it has to get wierd )
Hope it helps,
Regards,
Sunmit. -
Navigational Attribute data is not display in Cube level and reporting
Hello ALL
Iam facing a problem like,I created Navigational attribute and I selected that navigational attribute in cube level also but data is not display in cube level.
What will be the problem?Pl help me out.
regards
balajiHi Dinesh
You mean base characteristic means loading data after creating Navigational attribute?Is it this way,(orelse can u tell me about this base characterstic)
Yes after making that particular attribute as a navigational attribute I loaded data in master data tables.
How to run Attribute change run?can u give me steps
regards
balaji -
Navigational attribute in Cube
Hi Gurus,
I want to understand one point before I am going to perform a small enhancement.
I need to set a navigational attribute in a cube(before it is not checked on "I/O") meaning make this navigational attribute behave as a char., but this cube contains data already, my question is :
can I make this change ? if yes any other additional effort?
Thanks in advanceHi Ryan,
The attr needs to be marked and activated as Navigational Attr in the parent char first. Then you can mark it as nav attr in the cube (which contains the parent char). Does not matter if the cube contains data...you can do this activity in a cube with data. Remember to reactivate the cube's update rules and any multiproviders that it is a part of after you make this change.
Hope this helps... -
Adding navigational attributes to a cube
We have upgraded to BW 7.3. Previously when we added navigational attributes to a cube we need to activate the update rules from the ods but now it appears that we don't need to do that anymore. Is this the expected behavaior? We are using the 3.5 update rules.
thanksHI,
If you are using 3.5, after selecting nav attr in the cube, the cube structure gets deactivated. The dependent update rules also gets deactivated. You will be forced to activate all again.
In BW 7.3, SAP would have given privilege to add without activation. It is good for us. So nothing to worry.
Regards,
Suman -
Code needed for a Navigational Attribute.
Hi Experts,
I have a requirement to update records on a Navigational Attribute of an Infobject in an DSO.
DSO A has key figures Region & 0calmonth. Data fields Price, Quantity, Place & Name. DSO B has key figures 0customer & Data Filelds Plant, Material etc. DSO B Plant's Navigational Attribute is Region /BI0/OIREGION.
Now, I want to link the Region of DSO A with the Navigational Attribute of DSO B with Region /BI0/OIREGION and update the values of DSO A in DSO B.
For this I want to write a code in the END ROUTINE. Please provide me with the code.
Thanks in advance,
With Kind Regards,
Kannan Jagadeesan.Hi,
data : begin of itab1 OCCURS 0,
Region type /BI0/OIREGION-Region,
OBJVERS type RSOBJVERS,
calmonth type /BI0/OICALMONTH- calmonth
END OF itab1.
select * from /bic/DSOaa00 into table itab1 * this is DSO A*
for all entries in DATA_PACKAGE
where /BI0/OIREGION = DATA_PACKAGE-/BI0/OIREGION..
loop at DATA_PACKAGE.
select /BI0/OIREGION
/BI0/OICALMONTH
from /bic/DSOaa00
into TABLE itab1
where /BI0/OIREGION = DATA_PACKAGE-/BI0/OIREGION
If sy-subrc = 0.
sort itab.
endif.
read table itab with key /BI0/OIREGION = DATA_PACKAGE-/BI0/OIREGION.
if sy-subrc = 0.
/BI0/OIREGION = ITAB1-Region.
endif.
this is the dry draft to read the oregion navigational object.
try to correct accordingly in your system and implement it.
hope this helps you
santosh
Edited by: Santhosh Nagaraj on Sep 16, 2009 2:01 PM
Edited by: Santhosh Nagaraj on Sep 16, 2009 2:05 PM -
BI-IP / Formula navigation attribute
Hi,
i have the following problem and hope somebody can help.
I have a BI-IP planing function (Fox-Formula) which simply copies the keyfigure Amount from the characteristic company (#) to the characteristic company (8703).
{ KI_LCCUR, 8703 } = { KI_LCCUR,# }.
this characterisic has also a navigation attribute headquarter.
when i run the function the following error message appears:
8703,# is invalid: Valid is 8703,DE. Characteristic "ZCompany"
which means to me the master data for charactersitic company 8703 and its attribute Headquarter # is not valid, which is true. But what do i need to do in order to use the right combination 8703,DE?
Is there a way to make fox formula to find the right value for the attribute? is there a way use navigation attribute in fox formule?
Thanks for your help in advance!
MikeHi,
The problem can be due to the mapping in the cube.
Please reactivate your cube.
If you are using a multi-provider, then please check that the navigational attribute is defined in all the cubes in mulitprovider.
Regards,
Amit -
How to show data for navigational attribute in a report ?
Hello all,
I have a hierarchy info object A which has a navigational attribute(hierarchy) B. I need to filter on B for a particular node.
I have added A in the filter column and selected B as the attribute. How can i restrict B for a particular hierarchy node ?
Any help will be appreciated.
Thanks in advance
S NHi,
Have you defined 'B' as Navigational attribute at InfoProvider Level?
You can Restrict B for a Particular Value once it is defined as Navigational attribute at InfoProvder level.
Go to InfoProvider maintaince>click 'nav attributes'>enable it (check the box).activate the InfoProvider.
Then you can see it under same dimension where 'A' is assigned and its name would be A_B.
Drag and drop in to rows and restrict(include/exclude) with required value.
thanks
Message was edited by:
Murali -
Virtual infoprovider with services - Navigational attributes
Hi all,
I have a basic cube in BI system- X , and created a virtual cube in another BI system Y with services to read data from basic cube of BI system X . In BI system Y we built a report on virtual cube. This report (on virtual cube in BI system Y) is using a characteristics say Product group ( which is a navigational attributes of prodect in BI system X).
DataFlow is as under:
Basic cube in BI system X:
Product
Year
Amount
and Product group is switched on as navigational attributes in this basic cube.
Virtual cube in BI system Y:
Product group
Year
Amount
Report in BI system Y:
Product group in rows
Amount in column
This report is not working.
If I do the the following changes as follows then it works:
1.Use Product instead of product group in report
2. Switch off navigational attributes in basic cube.
We are in BW 3.5 and navigational attributes option is ticked on for virtual cube.
In summary, If I do not use navigational attributes in report and switch off navigational attributes from basic cube then report shows data.
Could you please help me to figure out the issue.
Thanks,
HarryThanks Naga,
Yes, I tried adding product in virtual cube as well but it did not work. Secondly, we do not want to add product in virtual cube because of data aggregation.
Most strange thing is that, once we switch on any navigational attributes on basic cube, function module stop working (paasing any data to virtual cube report). report says no appropriate data found. We are using sap standard function module "RSDRI_INFOPROV_READ_RFC". I debegged this code and no data in internal tables.
If we switch off all navigational attributes from basic/source cube this function module provide data to internal tables in code.
Why function module is behaving like that.
You guys experience/support/any clue will be appreciated highly.
Thanks,
Harry -
How to see Navigation attribute in Report
Hi ,
I am working on BI7.0.
In my Query , material is a characteristic which has 3-4 Navigation attributes. But when I execute the report , I can only see Material data displayed (because only material is in the rows). I also want to see data of its attributes in report results. I dont have authorisation to change the query.
Also I am unable to open the Query in Local view (some connectivity issues).
Can you please suggest How I can drill-down those attributes.??
Also these attributes are not visible in free characteristics.
Thanks,
SuHi there,
To use the navegational attributes with drill down, they have to be available in either rows, columns or free characterisitic.
For that you have to edit the query. There's no other way.
But each navegational attribute is also a display attribute.
Therefore, you can after executing the query, right-click over material and select properties. You'll see a tab named attributes where you can add the avilable attributes to the left (so they will be displayed), and change the settings of each one of them (see only key, key and text, etc.), but you can't filter by any of those attributes, or do any drill down options over them. They are only display attributes.
Hope this helps.
Diogo. -
Need help on Authorization on Navigational Attribute.
Hi All,
I am working on Authorizations.
I am using the info Object "Material group" which is the Navigational Attribute of 0MATERIAL.
In Reporting, I have created the Authorization Variable for Material group.
And after this, i have created the Authorization Object in RSECADMIN and added the info Object "Material group" and harded coded the value as "1000". After this, i have created the Authorization Role in PFCG and added this authorization Object over there.And this role is assigned specific User.
While Running the report on specific User, for Material group, filteration is not happening over there (Material group = 1000). It is showing all values for this user.
Can you please help on this issue.
Thanks,
Shahina AThanks for your reply. I was on leave for the past 2 days. I have checked as you suggested.
In 0MATERIAL, 0MATL_GROUP is the attribute and i have made Authorization Relvent for this Attribute.
And i activated the Info object 0MATERIAL.
Then i have run the query in RSRT and found an error while running the Report.
Can u pls help on this issue.
Diagnosis
The system determined the authorized characteristic values for the characteristic 0MATERIAL__0MATL_GROUP. It determined that you do not have the (analysis) authorization to view transaction data for any characteristic values or range.
System Response
If this situation occurs when a variable is being filled, the query cannot be executed.
Procedure
You must have authorization for at least one characteristic value for the characteristic 0MATERIAL__0MATL_GROUP.
Create the appropriate analysis authorizations for the user.
If you are only authorized for evaluations that aggregate using the characteristic 0MATERIAL__0MATL_GROUP (for ":" authorizations), use a query without this characteristic. If the characteristic is not used as a filter or in the drilldown, variables should not be used.
Procedure for System Administration
Notification Number EYE 018
Thanks,
Shahina A -
# values for navigational attributes in report . (Urgent)
Hi Gurus,
I have a navigational attributes for time dependent master data. In the report I am not able to see values for that navigational attribute. I see # values for the navigational attributes. I checked the master data of main info-object. every thing looks fine.
please help me in regarding this.
thanks,
Regards,
AarthiCheck the following two things again just to make sure you are doing everything right. These are already mentioned by Bhanu...
1) Go to the master data table (Q table or the M table) and check to see if there are M version records (OBJVERS = M). If yes, you need to activate the master data using the program RSDDS_AGGREGATES_MAINTAIN (Change Run). If there are no M version records then check the second step
2) If you do not enter any key date in the query, it takes the system date as the default key date. So check and see if any master data exists for today's date ?
Also just curious, which version and support pack level are you on ?
Maybe you are looking for
-
Encrypted="true" does not encrypt MBean attribute
Hi, I have developed a Custom Weblogic Security Service Provider. I have also created an MBean to manage my provider. One of my MBean attributes is as follows: <MBeanAttribute Name = "JdbcPassword" DisplayMessage = "The JDBC Password to the security
-
Xcode 2.5 (Tiger) download issue
I've been trying to download XCode 2.5 to do some development on my Tiger iMac... it downloads but it fails the checksum ("Verification failed" when it tries to mount). Is this a known situation? What are my options?
-
Freight cost per meter (load lenght)
Dear All, I try to define shipping cost calculation by length(in meter) in a transportation project I have managed a condition type (multi-dimentional) with calculation base 'C : Handling Units' 2 scales, one for the transportation zone destination a
-
My "picture-perfect" JPG images become grainy or coarse when I upload them to imageshack.us, yahoo, etc.
-
Calculate the Difference Between two dates excluding weekends and Holidays
Hi, We need to calculate the difference between the two dates by excluding the Local public holidays (It is global and varies across countries) and weekends should not be included in calculation for a business day in OBIEE. We have two dates: Open da