Locking up after SL and 9 upgrade

After updating 5 or 10 minutes into a project the mouse starts to sputter then just stops stops. I'm aware that there's a problem with line 6 pod XT pro. I have it powered down. 2 more things that might help. On power up I here a very high pitch only a dog like me can here. I hit command esc. and it goes away. also when it locks up I do the same thing command esc and front row pops up. Hit esc again and the mouse is free to move. Are there start up programs I can remove or something. I don't think its logic 9 I think its SL. No problems before this. No I didn't back up. External gear. motu 896, e-magic amt 8. mackie controller. again line 6. Need help. 3 hrs to move some midi info around. That *****!! Thanks Bill

OK Ive disabled front row. Unplugged line 6 pod XT pro and removed all drivers for it. Seems after recording midi tracks all within logic. My cursor sputters around them it just freezes 10 mins later its ok kinda. Ill click on a window and it will get dragged around without holding down right or left on the mouse. Any help. I feel like I want to go back to just leopard!!! Thanks Bill
Message was edited by: cowbell bill

Similar Messages

After APTV and itunes upgrade on mac, streaming from itunes to Apple TV is very slow.

After APTV and itunes upgrade on mac to latest on 02/15, streaming from itunes to Apple TV is very slow. even 5 mins song takes 10-15 mins to start. Netflix/Youtube work fine on Apple TV. restarted Mac, router, modem, appletv. reset Appletv to factory setting and re-start.

Apple TV 2 does not appear in iTunes (exception being when connected via micro-usb for restore) as it has no sync capabilities.
See if this helps
http://support.apple.com/kb/TS2845

HP Pavilion G7 notebook locks up after Windows 8.1 upgrade

Looking for some help & advice here.....
I upgraded my HP Pavilion G7 notebook from Windows to Windows 8.1......and now it appears to lock up after a while.
I have a Ralink RT3290 adapter and saw that may be a new driver will fix this problem but I'm not sure
Other system info:
Product # C2M35UAR#ABA
System Board 1845 56.32
System BIOS F.24
Any help appreciated here.....
Many Thanks!

@cpal
I did some searching for you looking for any updated drivers that might work. The problem is that Ralink was bought out a few years ago, and many of the Ralink devices do not have Windows 8.1 drivers, even from them. Given the choice it would be better to use the HP versions if windows 8 versions are the only option because at least the driver would have been somewhat customized to be compatible with the normal set of hardware in a HP notebook.
Here are a few you can try that may help:
MediaTek(Ralink)802.11 b/g/n Wireless LAN (WLAN) Adapter
Ralink 802.11 b/g/n Wireless LAN Adapter Driver
Hopefully one of those will work for you, otherwise we can only look for MediaTek to make an updated driver for windows 8.1 in the future.
And if you are interested here is a blurb on Ralink - wikipedia.org
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

How can I get my email and message notifications back on the lock screen after the 5.01 upgrade?

After the 5.01 Lollipop upgrade I lost my email, text and voice mail notifications on the lock screen on my LG G3. How do I get them back?

Still didnt work...i dont know whats wrong.. i want them to look like this...

After kernel and xorg upgrade, xorg crashes at login

I've upgraded several packages and have some trouble with Xorg since then. Those are the upgraded packages:
[2009-12-26 18:08] upgraded libdrm (2.4.16-1 -> 2.4.17-2)
[2009-12-26 18:08] upgraded libgl (7.6-2 -> 7.7-1)
[2009-12-26 18:08] upgraded ati-dri (7.6-2 -> 7.7-1)
[2009-12-26 18:08] upgraded git (1.6.5.7-1 -> 1.6.6-1)
[2009-12-26 18:09] upgraded gnome-bluetooth (2.28.3-1 -> 2.28.6-1)
[2009-12-26 18:09] upgraded gnome-user-share (2.28.1-1 -> 2.28.2-1)
[2009-12-26 18:09] upgraded hdparm (9.27-1 -> 9.27-2)
[2009-12-26 18:09] upgraded kernel26-firmware (2.6.32.2-1 -> 2.6.32.2-2)
[2009-12-26 18:10] upgraded kernel26 (2.6.30.6-1 -> 2.6.32.2-2)
[2009-12-26 18:10] upgraded lib32-libdrm (2.4.16-1 -> 2.4.17-2)
[2009-12-26 18:10] upgraded lib32-libgl (7.6-2 -> 7.6.1-1)
[2009-12-26 18:10] upgraded lib32-mesa (7.6-2 -> 7.6.1-1)
[2009-12-26 18:10] upgraded libgnome (2.28.0-1 -> 2.28.0-2)
[2009-12-26 18:10] upgraded libxcb (1.4-1 -> 1.5-1)
[2009-12-26 18:10] upgraded mesa (7.6-2 -> 7.7-1)
[2009-12-26 18:10] upgraded pm-utils (1.2.6.1-2 -> 1.2.6.1-3)
[2009-12-26 18:10] upgraded pycups (1.9.46-2 -> 1.9.47-1)
[2009-12-26 18:10] upgraded ruby-gnome2 (0.19.3-1 -> 0.19.3-2)
[2009-12-26 18:10] upgraded run-parts (3.2.1-1 -> 3.2.2-1)
[2009-12-26 18:10] upgraded system-config-printer-common (1.1.13-1 -> 1.1.15-1)
[2009-12-26 18:10] upgraded system-config-printer-gnome (1.1.13-1 -> 1.1.15-1)
[2009-12-26 18:11] upgraded totem (2.28.4-1 -> 2.28.5-1)
[2009-12-26 18:11] upgraded udev (146-2 -> 149-1)
[2009-12-26 18:11] upgraded xf86-input-evdev (2.2.5-1 -> 2.3.2-1)
[2009-12-26 18:11] upgraded xf86-input-keyboard (1.3.2-2 -> 1.4.0-1)
[2009-12-26 18:11] upgraded xf86-input-mouse (1.4.0-2 -> 1.5.0-1)
[2009-12-26 18:11] upgraded xf86-video-ati (6.12.2-2 -> 6.12.4-3)
[2009-12-26 18:11] upgraded xf86-video-vesa (2.2.0-1 -> 2.2.1-1)
[2009-12-26 18:11] upgraded xorg-server-utils (7.4-7 -> 7.5-3)
[2009-12-26 18:11] upgraded xorg-server (1.6.3.901-1 -> 1.7.3.902-1)
[2009-12-26 18:11] upgraded zlib (1.2.3.3-3 -> 1.2.3.4-1)
[2009-12-26 18:14] upgraded flvstreamer (1.8k-1 -> 1.9-1)
[2009-12-29 12:59] upgraded lib32-libgcrypt (1.4.4-2 -> 1.4.5-1)
[2009-12-29 12:59] upgraded lib32-libgl (7.6.1-1 -> 7.7-1)
[2009-12-29 12:59] upgraded lib32-mesa (7.6.1-1 -> 7.7-1)
[2009-12-29 12:59] upgraded libass (0.9.7-1 -> 0.9.8-1)
[2009-12-29 12:59] upgraded lucene (2.9.0-1 -> 3.0.0-1)
[2009-12-29 12:59] upgraded subversion (1.6.6-2 -> 1.6.6-3)
[2009-12-29 12:59] upgraded tzdata (2009s-1 -> 2009t-1)
[2009-12-29 12:59] upgraded zlib (1.2.3.4-1 -> 1.2.3.4-3)
I have tried to disable KMS, and tried further to disable Compiz, to no avail. Every time I log into Xorg, I either get a black screen with nothing showing (I can move the cursor, though), or sometimes I can see the wallpaper. When I do see the wallpaper, however, Xorg eventually freezes. When I do not see the wallpaper, nothing happens.
Anyway, if you need any more information, tell me, I'll tell it.

@rocking turtle
I just uninstalled xf86-input-mouse and xf86-input-keyboard. I had already configured my input devices to work with xf86-input-evdev.
The login process went a little further than usual (gnome-panel loaded) but then Xorg crashed and I was forced back to GDM.
@ewaller
I'm posting my rc.conf, /var/log/Xorg.0.log and the interesting stuff you wanted from everyting.log:
The intereting stuff in everything.log seems to point at libdrm, and my stupid ATI card.
Dec 30 10:07:36 cipher kernel: [drm] Initialized drm 1.1.0 20060810
Dec 30 10:07:36 cipher kernel: [drm] radeon defaulting to userspace modesetting.
Dec 30 10:07:36 cipher kernel: pci 0000:01:00.0: setting latency timer to 64
Dec 30 10:07:36 cipher kernel: [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
Dec 30 10:07:36 cipher kernel: [drm] Setting GART location based on new memory map
Dec 30 10:07:36 cipher kernel: [drm] Loading R500 Microcode
Dec 30 10:07:36 cipher kernel: platform radeon_cp.0: firmware: requesting radeon/R520_cp.bin
Dec 30 10:07:36 cipher load-modules.sh: 'platform:radeon_cp' is not a valid module or alias name
Dec 30 10:07:36 cipher kernel: [drm] Num pipes: 1
Dec 30 10:07:36 cipher kernel: [drm] writeback test succeeded in 1 usecs
Dec 30 10:07:44 cipher gdm-simple-greeter[4794]: GLib-GObject-CRITICAL: g_param_spec_flags: assertion `G_TYPE_IS_FLAGS (flags_type)' failed
Dec 30 10:07:44 cipher gdm-simple-greeter[4794]: GLib-GObject-CRITICAL: g_object_class_install_property: assertion `G_IS_PARAM_SPEC (pspec)' failed
Dec 30 10:07:45 cipher gdm-simple-greeter[4794]: WARNING: Unable to read from file /etc/arch-release
Dec 30 10:07:46 cipher gdm-simple-greeter[4794]: Pango-WARNING: Invalid UTF-8 string passed to pango_layout_set_text()
Dec 30 10:08:01 cipher nautilus: Nautilus-Actions 1.12.2 initializing...
Dec 30 10:08:54 cipher kernel: CE: hpet increasing min_delta_ns to 15000 nsec
Dec 30 10:09:51 cipher kernel: CE: hpet increasing min_delta_ns to 22500 nsec
Dec 30 10:13:14 cipher NetworkManager: <info> (wlan0): supplicant connection state: completed -> group handshake
Dec 30 10:13:14 cipher NetworkManager: <info> (wlan0): supplicant connection state: group handshake -> completed
Dec 30 10:13:51 cipher kernel: [drm] Num pipes: 1
Dec 30 10:13:52 cipher kernel: [drm] Setting GART location based on new memory map
Dec 30 10:13:52 cipher kernel: [drm] Loading R500 Microcode
Dec 30 10:13:52 cipher kernel: platform radeon_cp.0: firmware: requesting radeon/R520_cp.bin
Dec 30 10:13:52 cipher kernel: [drm] Num pipes: 1
Dec 30 10:13:52 cipher kernel: [drm] writeback test succeeded in 1 usecs
Dec 30 10:13:52 cipher load-modules.sh: 'platform:radeon_cp' is not a valid module or alias name
Dec 30 10:13:54 cipher gdm-simple-greeter[5211]: GLib-GObject-CRITICAL: g_param_spec_flags: assertion `G_TYPE_IS_FLAGS (flags_type)' failed
Dec 30 10:13:54 cipher gdm-simple-greeter[5211]: GLib-GObject-CRITICAL: g_object_class_install_property: assertion `G_IS_PARAM_SPEC (pspec)' failed
Dec 30 10:13:54 cipher gdm-simple-greeter[5211]: WARNING: Unable to read from file /etc/arch-release
Dec 30 10:13:54 cipher gdm-simple-greeter[5211]: Pango-WARNING: Invalid UTF-8 string passed to pango_layout_set_text()
Dec 30 10:14:03 cipher gnome-session[5241]: WARNING: Could not launch application 'wally.desktop': Unable to start application: Failed to execute child process "wally" (No such file or directory)
Dec 30 10:14:03 cipher gnome-session[5241]: WARNING: Could not launch application 'awn.desktop': Unable to start application: Failed to execute child process "awn-autostart" (No such file or directory)
Dec 30 10:14:13 cipher nautilus: Nautilus-Actions 1.12.2 initializing...
Dec 30 10:14:51 cipher kernel: [drm] Num pipes: 1
Dec 30 10:14:51 cipher kernel: compiz[5424]: segfault at 4 ip 00007fdda45f93b0 sp 00007fff520a1358 error 4 in libxcb-glx.so.0.0.0[7fdda45f0000+12000]
Dec 30 10:14:52 cipher kernel: [drm] Setting GART location based on new memory map
Dec 30 10:14:52 cipher kernel: [drm] Loading R500 Microcode
Dec 30 10:14:52 cipher kernel: platform radeon_cp.0: firmware: requesting radeon/R520_cp.bin
Dec 30 10:14:52 cipher kernel: [drm] Num pipes: 1
Dec 30 10:14:52 cipher kernel: [drm] writeback test succeeded in 1 usecs
Dec 30 10:14:52 cipher load-modules.sh: 'platform:radeon_cp' is not a valid module or alias name
Dec 30 10:14:53 cipher gdm-simple-greeter[5630]: GLib-GObject-CRITICAL: g_param_spec_flags: assertion `G_TYPE_IS_FLAGS (flags_type)' failed
Dec 30 10:14:53 cipher gdm-simple-greeter[5630]: GLib-GObject-CRITICAL: g_object_class_install_property: assertion `G_IS_PARAM_SPEC (pspec)' failed
Dec 30 10:14:53 cipher gdm-simple-greeter[5630]: WARNING: Unable to read from file /etc/arch-release
Dec 30 10:14:54 cipher gdm-simple-greeter[5630]: Pango-WARNING: Invalid UTF-8 string passed to pango_layout_set_text()
Dec 30 10:15:02 cipher nautilus: Nautilus-Actions 1.12.2 initializing...
Here's my /var/log/Xorg.0.log:
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.3.902 (1.7.4 RC 2)
Release Date: 2009-12-26
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH x86_64
Current Operating System: Linux cipher 2.6.32-ARCH #1 SMP PREEMPT Sat Dec 26 09:02:58 CET 2009 x86_64
Kernel command line: root=/dev/disk/by-uuid/cc39eaa7-c39d-4f29-916d-cf0cb8c14611 ro vga=792 boot=quiet
Build Date: 26 December 2009 02:34:45PM
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 30 10:14:51 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) Option "AIGLX" "true"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AutoAddDevices.
(II) Loader magic: 0x7c09c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 9
(--) PCI:*(0:1:0:0) 1002:7145:1028:2003 ATI Technologies Inc Radeon Mobility X1400 rev 0, Mem @ 0xd0000000/268435456, 0xefdf0000/65536, I/O @ 0x0000ee00/256, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "xtrap"
(WW) Warning, couldn't open module xtrap
(II) UnloadModule: "xtrap"
(EE) Failed to load module "xtrap" (module does not exist, 0)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 6.12.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI RS880
(II) Primary Device is: PCI 01@00:00:0
(II) RADEON(0): TOTO SAYS 00000000efdf0000
(II) RADEON(0): MMIO registers at 0x00000000efdf0000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "DRI" "true"
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Mobility Radeon X1400" (ChipID = 0x7145)
(--) RADEON(0): Linear framebuffer at 0x00000000d0000000
(II) RADEON(0): PCIE card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1028 SubsystemID: 0x2003
IOBaseAddress: 0xee00
Filename: BR18652D.bin
BIOS Bootup Message:
M54P Dell Key largo A12 DDR2 BU BIOS 432e/396m Channel B
(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0x7ffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0x7ffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 432000
(II) RADEON(0): Default Memory Clock: 396000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1100000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 27000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.31.0
(==) RADEON(0): Page Flipping disabled on r5xx and newer chips.
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=131072K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (64 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 64800, max_out_pll: 110000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 432.000000, mclk: 396.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=64800 max=110000; xclk=40000
(WW) RADEON(0): LVDS Info:
XRes: 1280, YRes: 800, DotClock: 68900
HBlank: 128, HOverPlus: 21, HSyncWidth: 32
VBlank: 16, VOverPlus: 1, VSyncWidth: 3
(II) RADEON(0): Skipping TV-Out
(II) RADEON(0): Skipping Component Video
encoder: 0x15
encoder: 0xf
(II) RADEON(0): Output VGA-0 using monitor section Monitor0
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Port0:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_KLDSCP_DAC1
DDC reg: 0x7e40
(II) RADEON(0): Port1:
XRANDR name: LVDS
Connector: LVDS
LCD1: INTERNAL_LVTM1
DDC reg: 0x7e30
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 0
(II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: CPT Model: 140b Serial#: 0
(II) RADEON(0): Year: 2007 Week: 14
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.613 redY: 0.336 greenX: 0.311 greenY: 0.563
(II) RADEON(0): blueX: 0.152 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): CT7810154WB4
(II) RADEON(0): *=DPn
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000e140b1400000000
(II) RADEON(0): 0e110103802115780a092d9d564f9027
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ea1a0080502010301520
(II) RADEON(0): 13004bcf100000190000000f00000000
(II) RADEON(0): 0000000000206e050f00000000fe0043
(II) RADEON(0): 543738313031353457423420000000fe
(II) RADEON(0): 002a3d44506e94b7ff010120202000f7
finished output detect: 1
finished all detect
before xf86InitialConfiguration
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: CPT Model: 140b Serial#: 0
(II) RADEON(0): Year: 2007 Week: 14
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.613 redY: 0.336 greenX: 0.311 greenY: 0.563
(II) RADEON(0): blueX: 0.152 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): CT7810154WB4
(II) RADEON(0): *=DPn
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000e140b1400000000
(II) RADEON(0): 0e110103802115780a092d9d564f9027
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ea1a0080502010301520
(II) RADEON(0): 13004bcf100000190000000f00000000
(II) RADEON(0): 0000000000206e050f00000000fe0043
(II) RADEON(0): 543738313031353457423420000000fe
(II) RADEON(0): 002a3d44506e94b7ff010120202000f7
(II) RADEON(0): EDID vendor "CPT", prod id 5131
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output LVDS using initial mode 1280x800
(II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.2.1
ABI class: X.Org Video Driver, version 6.0
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) RADEON(0): RADEONScreenInit d0000000 0 0
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x08000000
(II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Using 32 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 29 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
(II) RADEON(0): Reserved area from (0,1280) to (1280,1282)
(II) RADEON(0): Largest offscreen area available: 1280 x 6909
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0x1978000
(II) RADEON(0): Will use depth buffer at offset 0x1fb8000
(II) RADEON(0): Will use 32 kb for PCI GART table at offset 0x7ff8000
(II) RADEON(0): Will use 92160 kb for textures at offset 0x25f8000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xd0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [pci] 32768 kB allocated with handle 0x0507f900
(II) RADEON(0): [pci] ring handle = 0x1b7ff000
(II) RADEON(0): [pci] Ring mapped at 0x7fe92fe69000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0x2b800000
(II) RADEON(0): [pci] Ring read ptr mapped at 0x7fe93c4a0000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0x1b800000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0x7fe92fc69000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0x1b801000
(II) RADEON(0): [pci] GART Texture map mapped at 0x7fe92dfe9000
(II) RADEON(0): [drm] register handle = 0x2fff8000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000 0xd7ffd000
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 16
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xd7ffd000 is: 0xd7ffd000
(WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0xffffffc0
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000 0xd7ffd000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
(II) RADEON(0): Render acceleration disabled
(II) RADEON(0): num quad-pipes is 1
(**) RADEON(0): Option "XaaNoOffscreenPixmaps" "true"
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00643000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00648000
(II) RADEON(0): Largest offscreen area available: 1280 x 6901
(II) RADEON(0): Set up textured video
Output CRT1 disable success
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Mode 1280x800 - 1408 816 10
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000 0xd7ffd000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
freq: 68900000
best_freq: 68900000
best_feedback_div: 689
best_ref_div: 18
best_post_div: 15
(II) RADEON(0): crtc(0) Clock: mode 68900, PLL 68900
(II) RADEON(0): crtc(0) PLL : refdiv 18, fbdiv 0x2B1(689), pdiv 15
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output digital setup success
Output LCD1 enable success
Enable CRTC 0 success
Unblank CRTC 0 success
Output CRT1 disable success
Blank CRTC 1 success
Disable CRTC 1 success
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 338 x 211
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "ca"
(**) Option "xkb_variant" "fr"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) Synaptics touchpad driver version 1.2.1
(**) Option "Device" "/dev/input/event9"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse
(**) Logitech USB-PS/2 Optical Mouse: always reports core events
(**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event8"
(II) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
(II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
(II) Logitech USB-PS/2 Optical Mouse: Found relative axes
(II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
(II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
(**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
(**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
(**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
(II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
(II) config/hal: Adding input device Chicony USB Keyboard
(**) Chicony USB Keyboard: always reports core events
(**) Chicony USB Keyboard: Device: "/dev/input/event7"
(II) Chicony USB Keyboard: Found keys
(II) Chicony USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Chicony USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "ca"
(**) Option "xkb_variant" "fr"
(II) config/hal: Adding input device Chicony USB Keyboard
(**) Chicony USB Keyboard: always reports core events
(**) Chicony USB Keyboard: Device: "/dev/input/event6"
(II) Chicony USB Keyboard: Found keys
(II) Chicony USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Chicony USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "ca"
(**) Option "xkb_variant" "fr"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event4"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "ca"
(**) Option "xkb_variant" "fr"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "ca"
(**) Option "xkb_variant" "fr"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "ca"
(**) Option "xkb_variant" "fr"
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "CPT", prod id 5131
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: CPT Model: 140b Serial#: 0
(II) RADEON(0): Year: 2007 Week: 14
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.613 redY: 0.336 greenX: 0.311 greenY: 0.563
(II) RADEON(0): blueX: 0.152 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): CT7810154WB4
(II) RADEON(0): *=DPn
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000e140b1400000000
(II) RADEON(0): 0e110103802115780a092d9d564f9027
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ea1a0080502010301520
(II) RADEON(0): 13004bcf100000190000000f00000000
(II) RADEON(0): 0000000000206e050f00000000fe0043
(II) RADEON(0): 543738313031353457423420000000fe
(II) RADEON(0): 002a3d44506e94b7ff010120202000f7
(II) RADEON(0): EDID vendor "CPT", prod id 5131
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "CPT", prod id 5131
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: CPT Model: 140b Serial#: 0
(II) RADEON(0): Year: 2007 Week: 14
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.613 redY: 0.336 greenX: 0.311 greenY: 0.563
(II) RADEON(0): blueX: 0.152 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): CT7810154WB4
(II) RADEON(0): *=DPn
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000e140b1400000000
(II) RADEON(0): 0e110103802115780a092d9d564f9027
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ea1a0080502010301520
(II) RADEON(0): 13004bcf100000190000000f00000000
(II) RADEON(0): 0000000000206e050f00000000fe0043
(II) RADEON(0): 543738313031353457423420000000fe
(II) RADEON(0): 002a3d44506e94b7ff010120202000f7
(II) RADEON(0): EDID vendor "CPT", prod id 5131
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "CPT", prod id 5131
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: CPT Model: 140b Serial#: 0
(II) RADEON(0): Year: 2007 Week: 14
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.613 redY: 0.336 greenX: 0.311 greenY: 0.563
(II) RADEON(0): blueX: 0.152 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): CT7810154WB4
(II) RADEON(0): *=DPn
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000e140b1400000000
(II) RADEON(0): 0e110103802115780a092d9d564f9027
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ea1a0080502010301520
(II) RADEON(0): 13004bcf100000190000000f00000000
(II) RADEON(0): 0000000000206e050f00000000fe0043
(II) RADEON(0): 543738313031353457423420000000fe
(II) RADEON(0): 002a3d44506e94b7ff010120202000f7
(II) RADEON(0): EDID vendor "CPT", prod id 5131
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "CPT", prod id 5131
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: CPT Model: 140b Serial#: 0
(II) RADEON(0): Year: 2007 Week: 14
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.613 redY: 0.336 greenX: 0.311 greenY: 0.563
(II) RADEON(0): blueX: 0.152 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): CT7810154WB4
(II) RADEON(0): *=DPn
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000e140b1400000000
(II) RADEON(0): 0e110103802115780a092d9d564f9027
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ea1a0080502010301520
(II) RADEON(0): 13004bcf100000190000000f00000000
(II) RADEON(0): 0000000000206e050f00000000fe0043
(II) RADEON(0): 543738313031353457423420000000fe
(II) RADEON(0): 002a3d44506e94b7ff010120202000f7
(II) RADEON(0): EDID vendor "CPT", prod id 5131
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "CPT", prod id 5131
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: CPT Model: 140b Serial#: 0
(II) RADEON(0): Year: 2007 Week: 14
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.613 redY: 0.336 greenX: 0.311 greenY: 0.563
(II) RADEON(0): blueX: 0.152 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): CT7810154WB4
(II) RADEON(0): *=DPn
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000e140b1400000000
(II) RADEON(0): 0e110103802115780a092d9d564f9027
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ea1a0080502010301520
(II) RADEON(0): 13004bcf100000190000000f00000000
(II) RADEON(0): 0000000000206e050f00000000fe0043
(II) RADEON(0): 543738313031353457423420000000fe
(II) RADEON(0): 002a3d44506e94b7ff010120202000f7
(II) RADEON(0): EDID vendor "CPT", prod id 5131
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "CPT", prod id 5131
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: CPT Model: 140b Serial#: 0
(II) RADEON(0): Year: 2007 Week: 14
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.613 redY: 0.336 greenX: 0.311 greenY: 0.563
(II) RADEON(0): blueX: 0.152 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): CT7810154WB4
(II) RADEON(0): *=DPn
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000e140b1400000000
(II) RADEON(0): 0e110103802115780a092d9d564f9027
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ea1a0080502010301520
(II) RADEON(0): 13004bcf100000190000000f00000000
(II) RADEON(0): 0000000000206e050f00000000fe0043
(II) RADEON(0): 543738313031353457423420000000fe
(II) RADEON(0): 002a3d44506e94b7ff010120202000f7
(II) RADEON(0): EDID vendor "CPT", prod id 5131
And my rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="America/Toronto"
KEYMAP="cf"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(!pcspkr !snd_pcsp !bcm43xx !ndiswrapper loop b43 fuse)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="cipher"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
eth0="dhcp"
INTERFACES=(lo !eth0 !wlan0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(@openntpd @stdb @httpd @mysqld @cups @samba syslog-ng network netfs @crond alsa dbus hal fam networkmanager !gdm)
Oh and hell, if you want to have a look on my xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
# InputDevice "Mouse0" "CorePointer"
# InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "ServerFlags"
Option "AIGLX" "true"
EndSection
Section "Module"
Load "xtrap"
Load "extmod"
Load "dbe"
Load "glx"
Load "dri"
Load "drm"
Load "freetype"
Load "synaptics"
EndSection
#Section "InputDevice"
# Identifier "Keyboard0"
# Driver "kbd"
# Option "XkbLayout" "ca"
# Option "XkbVariant" "fr"
#EndSection
#Section "InputDevice"
# Identifier "Mouse0"
# Driver "mouse"
# Option "Protocol" "auto"
# Option "Device" "/dev/input/mice"
# Option "ZAxisMapping" "4 5 6 7"
#EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
Identifier "Monitor0"
VendorName "CPT"
ModelName "140b"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # 
#Option "AGPMode" # 
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # 
#Option "GARTSize" # 
#Option "RingSize" # 
#Option "BufferSize" # 
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # 
#Option "DepthBits" # 
#Option "PCIAPERSize" # 
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # 
#Option "RageTheatreCrystal" # 
#Option "RageTheatreTunerPort" # 
#Option "RageTheatreCompositePort" # 
#Option "RageTheatreSVideoPort" # 
#Option "TunerType" # 
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # 
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "Radeon Mobility X1400"
BusID "PCI:1:0:0"
Option "XAANoOffscreenPixmaps" "true"
Option "DRI" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
# SubSection "Display"
# Viewport 0 0
# Depth 1
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 4
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 8
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 15
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 16
# EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
Any bit of help is appreciated.

3 Beep when i try to boot Snow Leopard (after memory and sad upgrade)

Good night,
I have a Macbook Pro Later 2011 with Yosemite installed and today i tried to upgrade memory and SSD.
Memory: 16GB 1600MHz DDR3 (2x8) Corsair 11-11-11-30 1.35v
SSD: Corsair 120GB Sata 3 Force GT
After installation of my new gear, i tried to install OS X Snow Leopard through DVD and i get this 3 beep when boot start.
So i reinstalled the original hard drive, keep the new 16gb and started correctly.
Tried boot DVD again with the original hard drive and new 16gb but the 3 beep continues...
Then i removed the 16gb, but still doing this 3 beep stuff when i try boot from DVD.
I tried all combinations with new and old hardware but nothing more works...
I have changed the slots with both, the 16gb and old 4gb.
Could be the DVD corrupted?
Now im running my Yosemite with the original hard drive and the new 16gb memory without any issue.
Im already do the memory test nothing wrong appear in results
My configuration:
MacBook Pro (17 polegadas, Final de 2011)
Processador 2,4 GHz Omte; Cpre i7
Memória 16 GB 1600 MHz DDR3
Gráficos Intel HD Graphics 3000 512 MB
Could anyone help me plz?
ps. sorry for my english

The DVD's too old for that Mac. If you need to install an OS on it, connect it to the Internet and start it up with the Option, Command, and R keys held down.
(110037)

In Adobe Reader (v11.0.09) locked/froze after signing and can't access my full fill-in answers to edit

In Adobe Reader (v11.0.09), after answer application questions in scrolling window panes within a .pdf doc, I signed the doc, and it froze/locked, so I cannot edit or view the full answers anymore. On an ugent deadline, so any thoughts on how to re-access my full answers within the scrolling window panes in a .pdf doc? thanks!

Hi Paix,
It is normal once you sign a document it considered to be a complete of yours. So no one shouldnt make any change after you signed the documents gets locked.
You can get idea from this doc: https://acrobatusers.com/tutorials/how-to-lock-form-fields-using-a-digital-signature
Regards,
Ajlan Huda.

Activation issues after restore and OS upgrade

IPAD was disabled. Only option I had was restore. After restore, it offered to upgrade the OS which I accepted. Now, Activating IPAD requires my apple id which is ******@icloud.com. I don't even remember creating any account on icloud.com. I have tried to retrieve it unsuccessfully from Forgot Apple ID link. Any suggestions? workarounds? Many Thanks in advance.

You will not be able to re-activate your iPad if you do not remember the old Apple ID and Password.
This is the new security feature of IOS 7.

Iphoto will not launch after lion and iPhoto upgrade

"your iPhoto library is either in use by another application or has become unreadable
Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup.
This is the message i get after paying apple3 0 dollars for the lion upgrade and 14.99 iphoto upgrade. Can you now help fix?? you have my money. Now give me back my computer

Do as the instructions tell you.
Hold down the Option and Command keys and launch iPhoto at the same time.
You'll see a dialog box open.
Select: Repair Database
Or, restore from a backup.
FYI, Apple's policy states that, "all sales are final" > iTUNES STORE - MAC APP STORE - TERMS AND CONDITIONS

Zen Xtra 40G - PC Not Recognizing Unit after Firmware and Driver upgrade

I own a Zen Xtra 40G unit and have just recently upgraded the firmware to the latest version (.20.08). I then proceeded to upgrade to the latest Windows XP driver (.26.02) and after reboot, the system no longer recognized my jukebox.
I tried my room mates, still on an older version of the firmware, and his worked without a problem.
In order to check and see if it was a one time fluke, I uninstalled both the driver and Creative MediaSource and re-installed from the original CD.
Again, my jukebox (still with the new firmware) worked flawlessly. I then upgraded Media Source to the latest version (2.03.09) and rebooted only to find my jukebox still worked perfectly.
I then downloaded and installed the latest Windows driver again (.26.02) and rebooted. My PC stopped recognizing my jukebox again but my buddie's still worked without a problem.
Is there a known flaw with the Windows driver and the latest firmware version.
Could Creative fix the problem or let me know if there is a setting I need to change in order for my PC to recognize my jukebox under the latest software and drivers?

So am I to assume from that message you think I should revert back to the old driver?
Of course Technical Support was no help. Sometimes I think they either a) don't read English very well or b) don't read the entire e-mail.
Here's what they wrote:
With regards to the issue you are having, may I enquire on the programwhich you used after applying the Windows update that informed you thatthe player is not connected. In the meantime, please try downloading these two files and see if ithelps:Below is the link for the latest drivers/applications updates.<A href="]http://us.creative.com/support/downloads/[/url]Select MP3 Players -> Zen -> Zen XtraSelect Windows XPThe files are Creative MediaSource Software Update version 2.03.29 (39.46 MB)Filename: CMS_PCAPP_LB_2_03_29.exeThis software update allows you to manage your Creative NOMAD? playerwith the latest version of Creative MediaSource?, an advancedfull-featured media player.2) NOMAD JukeBox Type 2 Version .0.03 (English) Web Release (7.70 MB)Filename: JBTII_PCAPP_LB__0_03.exeThis software update is for Creative Zen and Creative NOMAD? Jukeboxowners who have installed Creative MediaSource? (version .00.54 orlater) on their computers.Please email us if you have any further questions or comments. Thankyou.For faster service please reply with previous correspondence whenreplying to this email.
Had they read my e-mail, they wouldn't have pointed my to software I had already DOWNLOADED and INSTALLED!!! Oh well... we'll see what tomorrow's answer brings.

ITouch stuck in recovery mode after iTunes and firmware upgrades

my iTouch has hung in recovery mode and will not restore after I updated to iTunes 7.7.1.11 and tried to update the firmware suggested on iTunes Summary screen after launching the new iTunes. The firmware I was at was 1.1.4 and iTunes was offering the update to 1.1.5. Now the iTouch is stuck.
i have tried the restore function, removed/reinstalled all Apple software, the iTouch resetting procedure (hold power & home buttons together), NOTHING WORKS.
HELP
Thanks,
nitefisher

I am having problems similar to this. After the ITUNES 7.7.1 upgrade and the ITOUCH 2.0.1 upgrade, ITUNES thinks the ITOUCH is is recovery mode and it must be restored. If you use the ITOUCH it works fine. I have recovered at least 10 times over the last 2 days. The ITUNES syncs sometimes and says restore is necessary sometimes. Various other errors pop up too. "The Ipod could not be restored. An unknown error occurred(6)" is just one of the errors. I wish I could back out the software because the hardware is fine. I suspect bugs in ITUNES. It's bad enough you have to pay for the ITOUCH upgrades but they have errors in them too. I've read numerous variations of this in the last 7 days with no clear fixes. Even the problems I am having are not consistant. If anyone has a clue let me know. Thanks.

Can't print after iTunes and Quicktime upgrade

I installed the upgrades to iTunes 7.1 and Quicktime 7.1.5. Now none of my applications can print to any of my printers. The behavior is that the print window appears normal, and I can "Save to pdf". When I click "Print" the appllication pops up an error message saying that printing is not possible. Eudora says it was trying to "allocate a GrafPort". the other apps give an uninformative message. I've tried both Apple and non-Apple apps. I haven't found an app that can print to any of my 3 priinters - 2 via USB, 1 via network connection.
I've reinstalled both upgrades and 10.4.8 and Security and patch. I've repaired permissions. The drivers are up to date. I zapped the PRAM. I can still print from my bootable backup. I've tried to use Fixamac's Printer Server Repair utility. It runs on the bootable backup, but it rejects my user passwords on the broken system (i.e., I can't run it)
I can live with the bootable backup for awhile, but I'd appreciate any advice for tracking down and fixing the problem.

in the CUPS error log I see several instances of the following
[09/Mar/2007:22:36:58 -0500] Full reload complete.
I [09/Mar/2007:22:54:03 -0500] Scheduler shutting down normally.
I [09/Mar/2007:22:55:24 -0500] Listening to 0:631
I [09/Mar/2007:22:55:24 -0500] Listening to 300f70:0
I [09/Mar/2007:22:55:24 -0500] Loaded configuration file "/private/etc/cups/cupsd.conf"
I [09/Mar/2007:22:55:24 -0500] Configured for up to 100 clients.
I [09/Mar/2007:22:55:24 -0500] Allowing up to 100 client connections per host.
I [09/Mar/2007:22:55:24 -0500] Full reload is required.
E [09/Mar/2007:22:55:24 -0500] LoadAllClasses: Unable to open /private/etc/cups/classes.conf - No such file or directory
Could this missing file be the source of my problem?

MBP Retina locked up after 10.9.2 upgrade

It locked up 2 to 3 times a day when the computer is "awaken from sleep" with and without the lid closed. At the login prompt, the mouse would work but the keyboard would not effectively render the mac useless. The only thing to do at that point is to power cycle. I have waited (before powe cycle) a few times but makes no difference. Looks like 10.9.2 is very buggy based on some of posts.

Hi steveb219,
Thanks for visiting Apple Support Communities.
If you receive error messages when syncing iCloud with Calendar, I recommend the steps in the "Troubleshooting on OS X" section of this article:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Best Regards,
Jeremy

Lost instruments after computer and GB upgrade.

Recently upgrade to a used G5 and attempted to migrate from my old G4 eMac to a 4 year old PowerMac G5. When I tried to open GB got a message that the instrument library was not valid. So, I attempted to upgrade from iLife 5 to iLife 8. Now all the instruments show up in the list, but most of them don't make any sound. Some do. I go to the App Support/GB and everything is where it's supposed to be, it just doesn't work.

Did you repair permissions? Maybe GB has problems accessing that folder.

TS3899 Can't access my email after restore and iOS upgrade

I restored my iPad -which wiped out my email accounts - and upgraded t latestt iOS
I re-entered my email account properties but now I can't receive or send email any longer. Error states it can't access the pop server.
I've checked account settings are same as iPhone and pc which are accessing email just fine
Help to troubleshoot / fix appreciated
Thx
Rob

The easiest thing to do is to restore from backup if you have one. The backup will continue the email settings. Do you have a recent backup?

Locking up after SL and 9 upgrade

Similar Messages

Maybe you are looking for