Lockup and messed display with intel 2.7 driver

my 865 G box
xorg 1.5 + intel = crash and i am thrown to the console
xorg 1.6 + intel legacy = working (bad performance)
xorg 1.6 + intel 2.6 = crash and i am thrown to the console
xorg 1.6 + intel 2.7 = no more console but this
i have kde 4 themed mouse arrow that i can move
keyboard does not react (including num lock and alt ctrl whatever)
display stays like that and does not change

with intel 2.7.0 i had the same, i think it's this issue:
http://bugs.archlinux.org/task/14394
http://bbs.archlinux.org/viewtopic.php?id=70209
for me xorg 1.6 and intel 2.6.3 works fine, but with KMS enabled (exa crashes as well):
http://bbs.archlinux.org/viewtopic.php?id=69083
- however I have 945GME

Similar Messages

  • I have an iMac and a MacBook with Intel Core 2 Duo processors. I realize that this is within the stated requirements for Lion.  However was wondering if by migrating to Lion this will result in too much demand on processor resources, thus a slower machine

    I have an iMac and a MacBook with Intel Core 2 Duo processors. I realize that this is within the stated requirements for Lion.  However was wondering if by migrating to Lion this will result in too much demand on processor resources, thus a slower machine than using Snow Leopard?

    Which iMac?  Which Macbook?   Both have had several model
    itertations, even within the framework of a Core2Duo processor.
    With that said, I have an early 2009 iMac 24", with 2.66 GHz
    Core2Duo with 8 gig of RAM, and in my opinion, seems to be running
    smoother and faster with Lion.

  • Dual networks, express and extreme problem with Intel iMac accessing both

    I have two airport networks setup to two different ISP's. One is setup using two Airport Expresses with a printer hung off one. The other is setup with an Airport Extreme with two USB disks.
    I have a G4 iBook 14" laptop and a MacPro 17" Intel laptop that see and can bee switched between both networks utilizing Internet Connect. They are running OS X 10.4.11.
    The other system is an Intel iMac 20" (late 2006) running OS X 10.5.1. The only wireless network it sees is the Airport Extreme. This is frustrating because I want to be able to switch to the Express network to print and cannot get the iMac to recognize the network. Before upgrading to 10.5.1, I could, on occasion, see the other network, now I can not.
    Has anyone experienced this and is there a way to fix it? I believe it is operating in 802.11n, but have no way to verify this.

    I miss posted this in windows. I reposted this in the Airport Extreme.

  • Is it possible to set primary and secondary display with 2 graphics cards?

    I have an Early 2008 Mac Pro with two graphics cards and four monitors installed. Does anyone know how the computer (or more specifically Keynote) determines which is the primary display and which is the secondary?
    Also is there any way to change the scheme?
    What I am trying to do is switch the primary and secondary from the two monitors in my office to the monitor at the podium (would like it to become primary) and a vga projector (would like it to become secondary)
    I bought the second graphics card so I wouldn't have to switch the cables back and forth three times a week. All the monitors work fine, it's just a matter of determining or changing primary/secondary
    Thanks in advance

    Thanks Malcolm
    I got that far – The keynote manual says that the display with the menu bar is the primary display – that works out fine. The problem is that the manual says that the display without the menu bar is the secondary (or alternate). But there are three displays without the menu bar.
    What I would like to find out is: is there a way to choose the display without the menu bar to be the alternate?
    When I try various combinations, there seems to be no rhyme or reason as to which display is the alternate.
    Thanks again for your response!

  • Reboot and video display with an R4850-512M [ Solved ]

    I do not know if this is a problem with my video adapter, the MSI R4850-512M, or my video monitor, a Viewsonic VP950b. When I reboot an OS, the motherboard, the MSI K9A2 Platinum, correctly reboots. The video monitor shows a blue light when it is receiving a signal in normal operating mode and a red light when not receiving a signal. I have connected the video adapter to the video monitor using a DVI connection.
    Upon reboot the video monitor's light goes from blue to red and I hear the beeps from the mobo as it reboots. It appears the mobo is successfully restarting but the video monitor's light often stays red and a "No Signal" message shows. I can usually get around this by quickly manually turning the monitor's power off and back on again, after which it picks up the signal from the video adapter, shows its blue light and the display screen. But I should not have to do this, and if I do not turn the monitor off and on quickly enough it completely loses the signal and never show the screen. Somehow the signal from the video adapter is not reaching the monitor on a reboot sequence.
    Does anybody know how to determine what the problem is between the video adapter and the monitor ?
    If I shut down the computer and then power it on, this never happens and the video monitor always picks up the connection from the video adapter as the system powers on, and the display is successfully shown.

    Quote from: Svet on 24-May-09, 09:13:19
    Looks to be monitor problem, test with another one.
    The plug on the back of the monitor connecting the cord to the power supply was not in securely. Once I pushed it all the way in the monitor has worked properly. Thank goodness it was just that.

  • Virtual PC v7.0.2 and macbook pro with intel cpu

    Is Microsoft Virtual PC v7.0.2 compatibble with intel cpu's?
    thanks

    Virtual PC for Mac will only work for the older PowerPC Macs.
    For the newer Intel Macs look at either Boot Camp from Apple <http://www.apple.com/bootcamp> or Parallels <http://www.parallels.com>. The performance of Windows with either of these solutions far outweighs Virtual PC.
    Hope this helps! bill
    1 GHz Powerbook G4   Mac OS X (10.4.8)  

  • Windows 8.1 erasing and changing files with chkdsk on external drives. Unnaceptable.

    I work for IT support for a small production studio.
    They use Windows 7 and Windows 8.1 for they workstations and linux on the rendering farm.
    There is an automated system with a nas to make backups of the production assets and renderings.
    They have ESATA ports on all the wokstations and use external hard drives to make backups of users files, each user has the responsability of make his /her own backup of personal files (or files from his computer that belong to production like photoshop
    patterns, brushes, licenses, rendering tests, plugins, etc).
    A week ago the main hard drive of one of the workstations failed.
    No problem. New, hard drive, fresh windows install, activation, production software, licenses from license server.
    But at the time of restoring the files, the external hard drive of the user contained only old files, and some new but not all. At first time, the user was blamed, but hw swears that he backedup his files. Two days later another user complained that is disk
    contained only the old files and his past backup was lost. I was called for help.
    After several tests i was able to reproduce the problem:
    Windows 8.1: Plug an external disk, make backups, copy new files erase old files, etc, eject the disk using safe removal.
    Windows 7: Plug THAT DISK, erase files, copy new files, make backups etc.
    Now here comes the problem: PLUG THAT DISK ON ANY COMPUTER WITH WINDOWS 8.1. A few seconds later windows reports that the disk had problems but some corrections were made and everything is ok. IT'S NOT. Any file copied from the prevous backup
    is erased (or now it has zero size) and previously erased files are there again. Some of these files are corrupted now but windows says that the disk is OK.
    -All the Workstations are up to date with a WSUS (as far as i know).
    -The external hard disks are OK (even i used a new formated disk attached to an itnernal port to reproduce the problem.
    Moving the backup disk between Windows 7 workstations is ok.
    Moving the backup disk between Windows 8.1 workstations sometimes triggers the problem.
    Moving the backup disk from a windows 7 workstation to a Windows 8.1 workstation ALWAYS triggers the problem.
    Windows 8.1 automatically triggers chkdsk and autorepair the disk a few seconds after insertion unless the user has the disk busy, in that case pops an alert for resterting the computer, and again erases new files and undelete old ones.
    First time in my life i see windows doing something like that to a healthy external hard drive.
    The event viewer is filled with chkdsk errors like the 26226 and 26228.
    We need a solution and i need an explanation of why this behaviour.
    Thanks and sorry for my bad english.

    Hi  Artag,
    I want to know what kind of hard disk is that ? A GPT format or MBR format?
    According to your description,  the GPT format hard disk might not be detected by a computer with a MBR format hard disk, vice versa, so, I suggest to check the disk format by plugining the hard disk to a bootable Windows 7 system, then:
    In the Disk Management console, on the View menu, point to Top, and then click Disk List. The upper pane displays a list of disk drives that specifies the partition style in the last column.
    The details about the get disk format steps and information about GPT format, you can find it below:
    http://msdn.microsoft.com/en-us/library/windows/hardware/dn653580(v=vs.85).aspx  
    Besides, a screenshot will be helpful for solving this.
    Regards
    Wade Liu
    TechNet Community Support

  • Can I dual boot windows 7 and mountain lion with an external hard drive.

    I have Mac OSX mountain lion installed and running on my 2TB external hard drive. Boot camp says that I have to use the default flash storage that came with my computer.. Is there a way to put it on my external hard drive if I partition it? I also am having a problem when I tried to use the default storage the setup would not let me format it to NTFS

    By default, Boot Camp formats the drive with FAT32. That's because Windows XP could be installed with FAT32 so, in order to write on that partition on Mac OS X, Boot Camp used it instead of NTFS.
    If you want to install Windows 7 (it's the only version that your Mac supports), you will have to format the Boot Camp partition in NTFS manually. To do it, just start the Windows installation as usual but, on partitioning screen, choose "BOOTCAMP" volume, press "Drive options" and then, Format, so the partition will be formatted in NTFS and you will be able to install Windows

  • IMac Retina 5k Display with 6 TB Fusion Drive

    For no good reason Apple offers no BTO option for build-in state of the art 6 TB hard drives as Fusion Drives in the Apple Online Store. Those drives work as Fusion Drive without any problem in customized iMacs already. I have seen it! So why leave out this option? Is there any way to get a BTO Retina iMac with 6 TB Fusion Drive? Maybe a premium reseller?

    Were you able to resolve this?  I have the same issue and the marks look almost exactly the same...
    Called Apple Care and they told me to take it in to an Apple Store, which I'll do after I backup everything.

  • FCPX and speed problems with new external hard drive

    Hi All,
    I have just bought a new Thunderbolt drive.   I created a very large disk image partition to separate my fcpx files from other iTunes type files - but strangely FCPX is now operating slower than it ever did when I was using 800 firewire.
    Any thoughts on why this might be the case?  I have encryption on the disk image (but it is the minimum amount). 
    Also - FCPX hangs regularly (when I go to Finder it states that the app is not responding) but then after 1 min, is back.   The whole environment is now less stable than when i was simply using  a 800 firewire drive with a disk image.
    All OS and FCPX is up to date.
    Any suggestions/comments appreciated.
    Best,
    R

    Hi Jim,
    Thanks for the tip.  I ran the app (quite a nifty app at that) and my speed tests for the main drive are Read 133 mbps and Write 137 mbps.  Which is not as high as I would expect for a Thunderbolt drive - does this sound right?
    Anyhow, I ran the same test on the Disk Image. And something is definitely wrong.  Read 1.4 mbps and Write 1.5 mbps
    Now I am scratching my head about this hard drive.   It is a single partition - nothing fancy.  Only this large Disk Image that is for media.  Any suggestions greatly appreciated.
    Best,
    R

  • I have and audgiy card with us 5.25 drive but i lost the cable with link it to the sound c

    have and audgiy card with is 5.25 dri've ,but i lost the cable with link it to the sound card/
    the model number of the 5.25 dri've is sb000/
    serial no:tsb004007876.
    is thare any way i can buy the cable form you?

    Just to confirm, you are logged into the iTunes Store using the account in which the balance exists, and the balance is showing at the top of the iTunes Store window? And you're not trying to purchase gifts for someone else?

  • Performance and instability trouble with intel iMac after 10.4.8

    Hi all,
    I have a 20" intel (Core Duo) iMac. Everything was super fast and nice since I bought it last February.
    I recently "software updated" to 10.4.8 and since then it seems slower, groggy, and Safari crashes regularly.
    Is this a known issue or is it just me? Is there anyway to uninstall 10.4.8? Or, can anyone recommend a utility to help diagnose the problem?
    boxlight

    Hi boxlight,
    No, you are not the first to mention the issues you are now experiencing with the 10.4.8 update...
    Here's what I would try: http://www.apple.com/support/downloads/macosx1048comboupdateintel.html - you can run the Combo Update and see if that "fixes" any issues. There have been posts re: using the Combo Update which ended up fixing some software glitches...
    You can also go here: http://www.thexlab.com/faqs/maintscripts.html#Anchor-Manually-49575 - I use the Terminal method to run the Maintenance Scripts and my Mac runs better than new...
    Good luck, Rick
    iMac G5 iSight 20" - 30G iPOD in Slimming Black -   Mac OS X (10.4.7)   - HP Pav 15" WS and Toshiba Sat 17" WS LP's - Canon 20D & A620

  • Write blobs to olite with VB and read/display with jsp

    How can I insert an image BLOB with Visual Basic into OLite 9i and afterwards read it again with JSP to display the image BLOB?

    Sure. There is even sample code for both VB and JSP in the Mobile SDK.
    ORACLE_HOME\Mobile\Sdk\Examples\BLOB Manager\SourceCode
    ORACLE_HOME\Mobile\Sdk\wtgsdk\src\sample6

  • Tecra S3 and A2 both with Intel 2200 BG - Poor instable WiFi access

    My department is using dozen's of Toshiba notebooks (15+ years).
    Latest generations up till the Tecra's S2, all went well using WiFi.
    Problems started with the A2. Then the same happened with the S3. Both from day ONE.
    Tosbiba NL suggested driver update: no improvement.
    Test: 1 Single user - 1 Cisco 1200 AP (802.11b)- No or brief connection (2 minutes) possible.
    Most of the time, the AP is not visible at all.
    Tried different channels. No difference.
    All other Toshiba notebooks with other WiFi adapter models, work well.
    Test with a 3Com (802.11b) AP went better, but still a very poor connection/speed.
    Test with a Cisco 1230 (802.11g) went better, but still
    very poor connection/speed.
    Intel suggestions re 2200BG:
    Power Save Polling to be the cause. But offer no solution.
    Bluetooth co-existance. BT is not installed the A2. BT is not activated on the S3. We don't see the relation here.
    There is no influence from other other equipment, operating in the 2.4 GHz range.
    Who does experience the same and is there any explanation/solution known?
    Regards and thank you,
    Bill

    Hi Bill
    Thanks for your post about your wireless issues observations.
    I have read some postings about the strange wireless LAN issues and mostly the WLan driver update procedure have solved the problems.
    As far as I know on the Intel website you can find the newest version of WLan BG driver.
    I suggest to download it and to reinstall the driver.
    http://downloadfinder.intel.com/scripts-df-external/Product_Filter.aspx?ProductID=1637&lang=eng
    Bye

  • IBM Calgary IOMMU and ACPI NUMA With Intel Core i7

    I been recompiling my kernel a lot to include support for my RevoDrive 3 and I've come across these two options which I'm not sure whether I should leave them enabled or disable them. In the help box for both of these options it says that it's recommended to keep them on if you have a Core i7, which I do. Yet, in dmesg it says that it can't detect calgary or any NUMA modes. Is this something that should really be enabled or is it ok to disable it? They don't show up with the stock kernel and I haven't had any problems with disabling them.
    [bran@chakra ~]$ dmesg|grep -i calgary
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [bran@chakra ~]$ dmesg|grep -i numa
    [ 0.000000] No NUMA configuration found
    [bran@chakra ~]$ cat /proc/cpuinfo|grep -i cpu
    model name : Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz

    Intel has a (rather technical) explanation on Turbo Boost: http://www.intel.com/content/www/us/en/architecture-and-technology/turbo-boost/turbo-boost-technolog...
    I have a W530 with the 3720M, and am completely happy with it.
    Regards, Martin

Maybe you are looking for