Lockup keyboard and mouse after Windows7 update
System: HP Pro 3135
Windows 7 Prof. 64 bit
Microsoft wired keyboard 600
Logitech mouse RX250
This problem starts at october 16th:
After automatic updates of Windows the keyboard and mouse locked. Only by start in secure mode, and return with widows system restore to an earlier point it is possible to activate keyboard and mouse again.
Now I switch off automatic updates, to prevent that the system hangs again.
The Microsoft forum is not clear about this error, could it be something in relation to the HP computer?
Any help is welcome.
This question was solved.
View Solution.
Hi,
There were some issues with the last batch of critical/recommended Windows Updates this month.
One of the updates disabled USB 2.0 device drivers from a specific USB vendor. I have found a web reference that may explain what has happened to you. I think the update was removed from Windows Update. This article may shed some light on your problem.
You may want to install each update manually till you find the one causing your problem. Sadly, when you find it you will have to system restore again and avoid that update. Or Microsoft may have pulled the offending update.
Is it an HP issue only? Impossible to comment on.
I have updated four HP systems, a Dell laptop, and a custom built system with no issues.
You really don't want to disable future Windows Updates permanently.
Jaco
****I am not an HP employee****
Please give a" Kudos, Thumbs Up" if advice received is relevant or" Accept as Solution" to assist other forum users having a similar problem.
HP Products:
810-150se Desktop (Win 8.1)
17t-j000 Notebook (Win 8 upgraded to Win 8.1)
H8 1380t CTO Desktop (Win 7)
560z Desktop (Win 7)
Other PC's:
Dell Inspiron Notebook (Win XP upgraded to Win 7)
Custom build: (Win XP upgraded to Win 7)
Errare humanum est.
Similar Messages
-
Keyboard and Mouse after Window 8 Login
We are using Windows 8.1 in Dell PC. Since installation it was working fine for last 2 months. Today morning when i boot the computer once boot screen over, keyboard and mouse got freeze and was not able to move the same.
1. Kb and mice is working fine in Bios setup.
2. Not able to boot with Safe mode in windows 8.1 even i tried with shift + F8 option.
3. Not able to refresh the PC.
4. Not able to restore old restore point as it shows no restore points.
5. Not able to Upgrade the OS.
We don't have any other options to try with this. We were happy while working with Windows 8. but such these irritating issues surely one side back step for Microsoft. Please sort out this issue ASAP. Advance thanks.
Sundar-EriezHi,
Did you have touchpad to control the computer?
If so, I suggest you try to disable fast boot to check the issue since this issue can be caused by failing to load drivers:
How to Turn "Fast Startup" On or Off for a Hybrid Boot in Windows 8 and 8.1
http://www.eightforums.com/tutorials/6320-fast-startup-turn-off-windows-8-a.html
Similar thread for your reference:
http://social.technet.microsoft.com/Forums/en-US/06e9b341-0619-4085-acbf-e2f0133ca428/windows-8-keyboard-and-mouse-not-working?forum=w8itprohardware
Kate Li
TechNet Community Support -
Ultraslim Plus keyboard and mouse issues with windows 8.1 (hesitation/jerkiness)
I'm just wondering if anyone else is experiencing issues with their Ultrslim Plus keyboard and mouse after the update to windows 8.1? Mine seems very hesitant missing lots of key presses and the mouse pointers movement accross the screen is jerky. I've uninstalled and reinstalled drivers but it still isn't working like it was yesterday. Batteries for both show as 100% and nothing else has changed.
Solved!
Go to Solution.My mistake. I'd installed version 1.5, the updated version 1.8 (specifically mentions windows 8.1 on download link) works perfectly.
-
IMac crashes since new keyboard and mouse arrived
Recently picked up the new wireless keyboard and mouse after my old set finally died and once I got them both working I started to experience constant system crashes including restart messeges and random software just quitting out without cause. The iMac worked fine before I got teh new kb&m, but I ahve never heard of new accessories causing a computer to freak out like this. The computer is currently running Tiger. Any ideas?
Suggest that you repost over in the Bluetooth Keyboard/Mouse Forums where the wireless folks hang out.
Also, since you have an Intel iMac, you may wish to cross-post over in the Using your Intel-based iMac Forums.
You should also indicate which version of Tiger you are using. -
Crashes since I got new keyboard and mouse
Recently picked up the new wireless keyboard and mouse after my old set finally died and once I got them both working I started to experience constant system crashes including restart messeges and random software just quitting out without cause. The iMac worked fine before I got teh new kb&m, but I ahve never heard of new accessories causing a computer to freak out like this. The computer is currently running Tiger. Any ideas?
No one has a single idea?
-
[Solved] Mouse and Keyboard Dont Work After BIOS Update
I spent the last few hours in windows 7 trying to prove to the guys over at MSFN that my problem wasn't driver or bios related by updating to the latest drivers and upgrading my bios to the most recent version. After I was finished I decided to boot back into arch to work some more on my custom kernel (since oddly it had the same problem before the bios update, the mouse and keyboard worked on one boot but once i rebooted into it again they no longer worked) and found that the keyboard and mouse no longer worked, thinking I had rebooted into the custom kernel by accident I rebooted and selected the default kernel once again only to find that the mouse and keyboard still didn't work.
Any ideas on how to fix this? I really don't want to reinstall since I just installed it last night.
Edit: Another silly mistake, i had renamed the original xorg.conf and never put back when I was finished. This makes me wonder why KDM even started up at all though.
Last edited by brando56894 (2010-01-08 08:04:21)Hello base76, welcome to the HP Forums.
It appears that the mouse and keyboard aren't working correctly. I will try to assist you with this.
To start could you please provide the following:
Model and product numbers for you notebook.
Currently install operating system.
Were these working previously? If yes, were any changes made prior to them not working?
Have you attempted any troubleshooting? If yes, what have you tried so far?
I look forward to your reply.
Thank you for posting on the HP Forums.
I worked on behalf of HP. -
Oops, sorry, using my iPad for this. My iMac's Bluetooth-connected devices are going haywire after awhile of use. All three things--the trackpad, keyboard, and mouse--act up, especially the trackpad, by being overly sensitive and often just clicking and moving on its own. I've restarted the computer, I've swabbed batteries out of the devices, and nothing has worked so far in solving this issue. I downloaded Lion when it came out and had the update last week (I think), but today is the first day to experience this issue and nothing was downloaded today. I've been sending out a flurry of emails, but nothing else to hint at why this problem happened. Any ideas??
Humm, thank you. I have my iPhone and iPad on the wireless network, and yeah--using the rechargable batteries. I'll try normal batteries and re-join the phone and get back to you. May take a day or so because the semester starts today. Thank you again.
-
Keyboard and Mouse no longer work after update
Earlier today I ran pacman -Syu for the first time since the 18th, and initially everything seemed to be working properly. However, upon my next boot, both my mouse and keyboard (both USB) no longer worked, leaving me stuck at the login screen unable to move the cursor or switch to a different terminal. Unplugging and reconnecting my keyboard and mouse did nothing.
A related topic (which could be solved by reconnecting the devices) suggested that booting with runlevel 1 might help, and this allowed me to use the terminal, but any attempt to start X resulted in getting stuck at login in the same way.
Disabling and re-enabling hotplugging via xorg.conf had no impact (there was a note in Xorg.0.log indicating that since hotplugging was enabled, mouse and keyboard drivers were being disabled. Apparently it's a fairly standard warning).
The only package that was updated that seemed to be input related was xf86-xinput, but downgrading to the previous version did not fix the problem.
Does anyone have any ideas as to what might have caused this issue?
Thanks for any help you can provide.Adding to the above: I also tried plugging in an Microsoft USB keyboard at the point when Windows freezes at the Windows log-in screen. The keyboard is not recognized and the only way I can leave this screen is to power-off the computer.
-
OS keyboard and mouse completely unresponsive after 10.6.1 update.
Hello,
Snow Leopard was running fine. I updated to 10.6.1 and now the computer boots up normally (background programs seem to be running fine) but the keyboard and mouse are completely unresponsive. I am even unable to dim the screen, change the volume etc etc. I was able to go into safe mode but then keyboard and mouse again are unresponsive.
Please help!
Thanks.I had something very similar happen. I shut the lid on my MacBook. When I opened it up, I tried to type in my password (I have it password protected when it sleeps) and none of the keystrokes did anything. I had to hit the power-off button to cold boot the computer.
-
my keyboard and mouse will randomly stop functioning. i have to wait 20 seconds for functionality to return. please help.
Hi,
I'm exactly having the same problem as described above running on Boot Camp v2.1 as well as Parallels latest version. My macbook will just hang on itself and i had to press the power button to restart. Is there any fix to this?
Thanks. -
No usb keyboard or mouse after building image for M81,82,and 83?
i have built an image using imagex and with dism but after imaging a machine (lets say a M83) it will take the image but once it comes to the screen to type the name i have no keyboard or mouse. let me be clear that this image is for a M81, m82 and an m83. i have injected drivers for the m83 but this will kill the keyboard and mouse on the m82. i have also tried to inject m82 drivers and this kills m83. so with that being said is there a universal keyboard and mouse drive that i can use for all three models. Or is there something i can modify to make it work on all three?
Append "1" to the grub entry that you use to boot. This will start the system at runlevel 1. Login normally. Run pacman -Syu to fully update the system. Try reboot.
Edit: Chg runlevel
Last edited by skunktrader (2012-04-17 04:08:53) -
Keyboard and Mouse doesn't work on system preferences after 10.5.2 upgrade
The keyboard and mouse configuration through the system preferences painel has stopped working after installing the update to version 10.5.2 of the Mac OS X.
This occurs when using the Brazilian Portuguese language. Any suggestion?I've found a fix here:
http://antoniofonseca.wordpress.com/2008/03/12/correcao-para-o-problema-do-tecla do-e-mouse-no-leopard-1052-em-pt-br/
In short: there's a problem with the Brazilian Portuguese translation, it's the only language affected. -
Keyboard and mouse not working after boot
Hello!
it's my first time here
I have been using archlinux for a couple of months and after an upgrade, my mouse and keyboard stopped working.
I have also posted it on linuxquestions:
http://www.linuxquestions.org/questions … ot-934040/
What might be causing that problem?
and, considering the problem occurred after an upgrade, reinstalling the system would correct it?when booting into runlevel 3, the keyboard and mouse works fine.
my pacman.log(only for the update day) and messages.log are:
Mar 11 11:35:37 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
Mar 11 11:35:37 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
Mar 11 11:35:37 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
Mar 11 11:35:37 myhost dhcpcd[2756]: eth0: eth0: MTU set to 576
Mar 11 11:39:41 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
Mar 11 11:39:41 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar 11 11:39:41 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
Mar 11 11:42:11 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
Mar 11 11:42:11 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar 11 11:42:11 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
Mar 11 11:44:41 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
Mar 11 11:44:41 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar 11 11:44:41 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
Mar 11 12:06:33 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
Mar 11 12:06:33 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar 11 12:06:33 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
Mar 11 12:16:45 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
Mar 11 12:16:45 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar 11 12:16:45 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
Mar 11 12:19:15 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
Mar 11 12:19:15 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar 11 12:19:15 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
Mar 11 12:21:45 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
Mar 11 12:21:45 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar 11 12:21:45 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
Mar 11 12:23:41 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
Mar 11 12:23:41 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar 11 12:23:41 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
Mar 11 12:31:56 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
Mar 11 12:31:56 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar 11 12:31:56 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
Mar 11 12:34:26 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
Mar 11 12:34:26 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar 11 12:34:26 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
Mar 11 12:35:37 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
Mar 11 12:35:37 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
Mar 11 12:35:37 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
Mar 11 12:35:37 myhost dhcpcd[2926]: eth0: eth0: MTU set to 576
Mar 11 12:36:56 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
Mar 11 12:36:56 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar 11 12:36:56 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
Mar 11 12:40:27 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
Mar 11 12:40:27 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar 11 12:40:27 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
Mar 11 12:52:30 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
Mar 11 12:52:30 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar 11 12:52:30 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
Mar 11 12:55:00 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
Mar 11 12:55:00 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar 11 12:55:00 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
Mar 11 12:57:30 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
Mar 11 12:57:30 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar 11 12:57:30 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
Mar 11 13:21:01 myhost -- MARK --
Mar 11 13:35:37 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
Mar 11 13:35:37 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
Mar 11 13:35:37 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
Mar 11 13:35:37 myhost dhcpcd[3041]: eth0: eth0: MTU set to 576
Mar 11 13:55:37 myhost -- MARK --
Mar 11 14:21:01 myhost -- MARK --
Mar 11 14:35:37 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
Mar 11 14:35:37 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
Mar 11 14:35:37 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
Mar 11 14:35:37 myhost dhcpcd[3095]: eth0: eth0: MTU set to 576
Mar 11 14:55:37 myhost -- MARK --
Mar 11 15:21:01 myhost -- MARK --
Mar 11 15:35:38 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
Mar 11 15:35:38 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
Mar 11 15:35:38 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
Mar 11 15:35:38 myhost dhcpcd[3144]: eth0: eth0: MTU set to 576
Mar 11 15:55:38 myhost -- MARK --
Mar 11 16:21:01 myhost -- MARK --
Mar 11 16:35:38 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
Mar 11 16:35:38 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
Mar 11 16:35:38 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
Mar 11 16:35:38 myhost dhcpcd[3192]: eth0: eth0: MTU set to 576
Mar 11 16:51:02 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
Mar 11 16:51:02 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar 11 16:51:02 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
Mar 11 17:21:01 myhost -- MARK --
Mar 11 17:27:48 myhost init: Trying to re-exec init
Mar 11 17:28:18 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:28:18 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:28:18 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:28:18 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:28:25 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:28:34 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:28:34 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:28:34 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:28:34 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:28:46 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:28:46 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:28:46 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:28:46 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:28:47 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:28:47 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:29:04 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:29:04 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:29:04 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:29:05 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:29:14 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:29:14 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:29:14 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:29:14 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:29:19 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:29:19 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:29:19 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:29:20 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:29:20 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:29:20 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:29:20 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:29:20 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:29:20 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:30:18 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:30:18 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:30:18 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:30:18 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:31:15 myhost kernel: [25090.053873] mdadm: sending ioctl 800c0910 to a partition!
Mar 11 17:31:15 myhost kernel: [25090.053877] mdadm: sending ioctl 800c0910 to a partition!
Mar 11 17:31:15 myhost kernel: [25090.053883] mdadm: sending ioctl 1261 to a partition!
Mar 11 17:31:15 myhost kernel: [25090.053885] mdadm: sending ioctl 1261 to a partition!
Mar 11 17:31:15 myhost kernel: [25090.060059] mdadm: sending ioctl 1261 to a partition!
Mar 11 17:31:15 myhost kernel: [25090.060061] mdadm: sending ioctl 1261 to a partition!
Mar 11 17:31:15 myhost kernel: [25090.076899] mdadm: sending ioctl 1261 to a partition!
Mar 11 17:31:15 myhost kernel: [25090.076902] mdadm: sending ioctl 1261 to a partition!
Mar 11 17:31:15 myhost kernel: [25090.077037] mdadm: sending ioctl 1261 to a partition!
Mar 11 17:31:15 myhost kernel: [25090.077039] mdadm: sending ioctl 1261 to a partition!
Mar 11 17:32:15 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:32:15 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:32:15 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:32:15 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:32:15 myhost dbus[434]: [system] Reloaded configuration
Mar 11 17:35:38 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
Mar 11 17:35:38 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
Mar 11 17:35:38 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
Mar 11 17:35:38 myhost dhcpcd[6669]: eth0: eth0: MTU set to 576
Mar 11 17:55:07 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
Mar 11 17:55:07 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar 11 17:55:07 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
Mar 11 17:57:37 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
Mar 11 17:57:37 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar 11 17:57:37 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
Mar 11 18:00:07 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
Mar 11 18:00:07 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar 11 18:00:07 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
Mar 11 18:17:33 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
Mar 11 18:17:33 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar 11 18:17:33 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
Mar 11 18:35:38 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
Mar 11 18:35:38 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
Mar 11 18:35:38 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
Mar 11 18:35:38 myhost dhcpcd[7243]: eth0: eth0: MTU set to 576
Mar 11 18:55:39 myhost -- MARK --
Mar 11 19:21:01 myhost -- MARK --
Mar 11 19:27:03 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
Mar 11 19:27:04 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar 11 19:27:04 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
Mar 11 19:29:33 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
Mar 11 19:29:33 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar 11 19:29:33 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
Mar 11 19:32:03 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
Mar 11 19:32:03 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar 11 19:32:03 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
Mar 11 19:34:05 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
Mar 11 19:34:05 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar 11 19:34:05 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
Mar 11 19:35:38 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
Mar 11 19:35:38 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
Mar 11 19:35:38 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
Mar 11 19:35:38 myhost dhcpcd[8708]: eth0: eth0: MTU set to 576
Mar 11 19:55:38 myhost -- MARK --
Mar 11 20:21:01 myhost -- MARK --
Mar 11 20:32:12 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
Mar 11 20:32:12 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar 11 20:32:12 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
Mar 11 20:34:42 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
Mar 11 20:34:42 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar 11 20:34:42 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
Mar 11 20:35:38 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
Mar 11 20:35:38 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
Mar 11 20:35:38 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
Mar 11 20:35:38 myhost dhcpcd[10147]: eth0: eth0: MTU set to 576
Mar 11 20:37:12 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
Mar 11 20:37:12 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar 11 20:37:12 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
Mar 11 20:48:37 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
Mar 11 20:48:37 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar 11 20:48:37 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
Mar 11 20:54:44 myhost shutdown[10347]: shutting down for system halt
Mar 11 20:54:44 myhost init: Switching to runlevel: 0
Mar 11 20:54:48 myhost dhcpcd[10522]: sending signal 1 to pid 1269
Mar 11 20:54:48 myhost dhcpcd[1269]: received SIGHUP, releasing
Mar 11 20:54:48 myhost dhcpcd[1269]: eth0: releasing lease of 192.168.1.100
Mar 11 20:54:48 myhost dhcpcd[10522]: waiting for pid 1269 to exit
Mar 11 20:54:48 myhost dhcpcd[10527]: eth0: eth0: MTU restored to 1500
Mar 11 20:54:49 myhost dhcpcd[1269]: eth0: removing interface
Mar 12 10:23:35 myhost kernel: [ 0.000000] Initializing cgroup subsys cpuset
Mar 12 10:23:35 myhost kernel: [ 0.000000] Initializing cgroup subsys cpu
Mar 12 10:23:35 myhost kernel: [ 0.000000] Linux version 3.2.6-2-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Feb 16 10:10:02 CET 2012
Mar 12 10:23:35 myhost kernel: [ 0.000000] Command line: root=/dev/disk/by-uuid/03876ae1-14ad-42f4-920b-9d949d3cb434 ro
Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-provided physical RAM map:
Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffc0000 (usable)
Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000bffc0000 - 00000000bffce000 (ACPI data)
Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000bffce000 - 00000000bfff0000 (ACPI NVS)
Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfffe000 (reserved)
Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0Mar 12 10:25:59 myhost kernel: [ 0.000000] Initializing cgroup subsys cpuset
Mar 12 10:25:59 myhost kernel: [ 0.000000] Initializing cgroup subsys cpu
Mar 12 10:25:59 myhost kernel: [ 0.000000] Linux version 3.2.6-2-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Feb 16 10:10:02 CET 2012
Mar 12 10:25:59 myhost kernel: [ 0.000000] Command line: root=/dev/disk/by-uuid/03876ae1-14ad-42f4-920b-9d949d3cb434 ro
Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-provided physical RAM map:
Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffc0000 (usable)
Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000bffc0000 - 00000000bffce000 (ACPI data)
Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000bffce000 - 00000000bfff0000 (ACPI NVS)
Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfffe000 (reserved)
Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
Mar 12 10:25:59 myhost kernel: [ 0.000000] NX (Execute Disable) protection: active
Mar 12 10:25:59 myhost kernel: [ 0.000000] DMI present.
Mar 12 10:25:59 myhost kernel: [ 0.000000] No AGP bridge found
Mar 12 10:25:59 myhost kernel: [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
Mar 12 10:25:59 myhost kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Mar 12 10:25:59 myhost kernel: [ 0.000000] last_pfn = 0xbffc0 max_arch_pfn = 0x400000000
Mar 12 10:25:59 myhost kernel: [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
Mar 12 10:25:59 myhost kernel: [ 0.000000] Using GB pages for direct mapping
Mar 12 10:25:59 myhost kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000bffc0000
Mar 12 10:25:59 myhost kernel: [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
Mar 12 10:25:59 myhost kernel: [ 0.000000] RAMDISK: 3759a000 - 37ff0000
Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: RSDP 00000000000fa1f0 00014 (v00 ACPIAM)
Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: RSDT 00000000bffc0000 00038 (v01 021709 RSDT1317 20090217 MSFT 00000097)
Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: FACP 00000000bffc0200 00084 (v01 021709 FACP1317 20090217 MSFT 00000097)
Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: DSDT 00000000bffc04a0 04880 (v01 1ADKR 1ADKR017 00000017 INTL 20051117)
Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: FACS 00000000bffce000 00040
Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: APIC 00000000bffc0390 00080 (v01 021709 APIC1317 20090217 MSFT 00000097)
Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: MCFG 00000000bffc0410 0003C (v01 021709 OEMMCFG 20090217 MSFT 00000097)
Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: WDRT 00000000bffc0450 00047 (v01 021709 NV-WDRT 20090217 MSFT 00000097)
Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: OEMB 00000000bffce040 00071 (v01 021709 OEMB1317 20090217 MSFT 00000097)
Mar 12 10:25:59 myhost kernel: [ 0.000000] Scanning NUMA topology in Northbridge 24
Mar 12 10:25:59 myhost kernel: [ 0.000000] No NUMA configuration found
Mar 12 10:25:59 myhost kernel: [ 0.000000] Faking a node at 0000000000000000-0000000140000000
Mar 12 10:25:59 myhost kernel: [ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
Mar 12 10:25:59 myhost kernel: [ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
Mar 12 10:25:59 myhost kernel: [ 0.000000] Zone PFN ranges:
Mar 12 10:25:59 myhost kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000
Mar 12 10:25:59 myhost kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000
Mar 12 10:25:59 myhost kernel: [ 0.000000] Normal 0x00100000 -> 0x00140000
Mar 12 10:25:59 myhost kernel: [ 0.000000] Movable zone start PFN for each node
Mar 12 10:25:59 myhost kernel: [ 0.000000] early_node_map[3] active PFN ranges
Mar 12 10:25:59 myhost kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f
Mar 12 10:25:59 myhost kernel: [ 0.000000] 0: 0x00000100 -> 0x000bffc0
Mar 12 10:25:59 myhost kernel: [ 0.000000] 0: 0x00100000 -> 0x00140000
Mar 12 10:25:59 myhost kernel: [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
Mar 12 10:25:59 myhost kernel: [ 0.000000] If you got timer trouble try acpi_use_timer_override
Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
Mar 12 10:25:59 myhost kernel: [ 0.000000] IOAPIC[0]: apic_id 3, version 17, address 0xfec00000, GSI 0-23
Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
Mar 12 10:25:59 myhost kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Mar 12 10:25:59 myhost kernel: [ 0.000000] SMP: Allowing 4 CPUs, 1 hotplug CPUs
Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bffc0000 - 00000000bffce000
Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bffce000 - 00000000bfff0000
Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bfff0000 - 00000000bfffe000
Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bfffe000 - 00000000fec00000
Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000
Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
Mar 12 10:25:59 myhost kernel: [ 0.000000] Allocating PCI resources starting at bfffe000 (gap: bfffe000:3ec02000)
Mar 12 10:25:59 myhost kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware
Mar 12 10:25:59 myhost kernel: [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
Mar 12 10:25:59 myhost kernel: [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s82176 r8192 d24320 u524288
Mar 12 10:25:59 myhost kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027914
Mar 12 10:25:59 myhost kernel: [ 0.000000] Policy zone: Normal
Mar 12 10:25:59 myhost kernel: [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/03876ae1-14ad-42f4-920b-9d949d3cb434 ro
Mar 12 10:25:59 myhost kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
Mar 12 10:25:59 myhost kernel: [ 0.000000] Checking aperture...
Mar 12 10:25:59 myhost kernel: [ 0.000000] No AGP bridge found
Mar 12 10:25:59 myhost kernel: [ 0.000000] Node 0: aperture @ 748000000 size 32 MB
Mar 12 10:25:59 myhost kernel: [ 0.000000] Aperture beyond 4GB. Ignoring.
Mar 12 10:25:59 myhost kernel: [ 0.000000] Your BIOS doesn't leave a aperture memory hole
Mar 12 10:25:59 myhost kernel: [ 0.000000] Please enable the IOMMU option in the BIOS setup
Mar 12 10:25:59 myhost kernel: [ 0.000000] This costs you 64 MB of RAM
Mar 12 10:25:59 myhost kernel: [ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
Mar 12 10:25:59 myhost kernel: [ 0.000000] Memory: 3974248k/5242880k available (4488k kernel code, 1049284k absent, 219348k reserved, 4409k data, 736k init)
Mar 12 10:25:59 myhost kernel: [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Mar 12 10:25:59 myhost kernel: [ 0.000000] Preemptible hierarchical RCU implementation.
Mar 12 10:25:59 myhost kernel: [ 0.000000] Verbose stalled-CPUs detection is disabled.
Mar 12 10:25:59 myhost kernel: [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
Mar 12 10:25:59 myhost kernel: [ 0.000000] Console: colour VGA+ 80x25
Mar 12 10:25:59 myhost kernel: [ 0.000000] console [tty0] enabled
Mar 12 10:25:59 myhost kernel: [ 0.000000] allocated 33554432 bytes of page_cgroup
Mar 12 10:25:59 myhost kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Mar 12 10:25:59 myhost kernel: [ 0.000000] Fast TSC calibration using PIT
Mar 12 10:25:59 myhost kernel: [ 0.000000] Detected 2109.668 MHz processor.
Mar 12 10:25:59 myhost kernel: [ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 4221.14 BogoMIPS (lpj=7032226)
Mar 12 10:25:59 myhost kernel: [ 0.003342] pid_max: default: 32768 minimum: 301
Mar 12 10:25:59 myhost kernel: [ 0.003370] Security Framework initialized
Mar 12 10:25:59 myhost kernel: [ 0.003376] AppArmor: AppArmor disabled by boot time parameter
Mar 12 10:25:59 myhost kernel: [ 0.003905] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mar 12 10:25:59 myhost kernel: [ 0.007031] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mar 12 10:25:59 myhost kernel: [ 0.007954] Mount-cache hash table entries: 256
Mar 12 10:25:59 myhost kernel: [ 0.008114] Initializing cgroup subsys cpuacct
Mar 12 10:25:59 myhost kernel: [ 0.008121] Initializing cgroup subsys memory
Mar 12 10:25:59 myhost kernel: [ 0.008131] Initializing cgroup subsys devices
Mar 12 10:25:59 myhost kernel: [ 0.008133] Initializing cgroup subsys freezer
Mar 12 10:25:59 myhost kernel: [ 0.008136] Initializing cgroup subsys net_cls
Mar 12 10:25:59 myhost kernel: [ 0.008138] Initializing cgroup subsys blkio
Mar 12 10:25:59 myhost kernel: [ 0.008192] CPU: Physical Processor ID: 0
Mar 12 10:25:59 myhost kernel: [ 0.008194] CPU: Processor Core ID: 0
Mar 12 10:25:59 myhost kernel: [ 0.008197] mce: CPU supports 6 MCE banks
Mar 12 10:25:59 myhost kernel: [ 0.008208] using AMD E400 aware idle routine
Mar 12 10:25:59 myhost kernel: [ 0.009025] ACPI: Core revision 20110623
Mar 12 10:25:59 myhost kernel: [ 0.011442] ftrace: allocating 17394 entries in 69 pages
Mar 12 10:25:59 myhost kernel: [ 0.014007] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
Mar 12 10:25:59 myhost kernel: [ 0.047059] CPU0: AMD Phenom(tm) 8400 Triple-Core Processor stepping 02
Mar 12 10:25:59 myhost kernel: [ 0.049997] Performance Events: AMD PMU driver.
Mar 12 10:25:59 myhost kernel: [ 0.049997] ... version: 0
Mar 12 10:25:59 myhost kernel: [ 0.049997] ... bit width: 48
Mar 12 10:25:59 myhost kernel: [ 0.049997] ... generic registers: 4
Mar 12 10:25:59 myhost kernel: [ 0.049997] ... value mask: 0000ffffffffffff
Mar 12 10:25:59 myhost kernel: [ 0.049997] ... max period: 00007fffffffffff
Mar 12 10:25:59 myhost kernel: [ 0.049997] ... fixed-purpose events: 0
Mar 12 10:25:59 myhost kernel: [ 0.049997] ... event mask: 000000000000000f
Mar 12 10:25:59 myhost kernel: [ 0.066733] NMI watchdog enabled, takes one hw-pmu counter.
Mar 12 10:25:59 myhost kernel: [ 0.093342] Booting Node 0, Processors #1
Mar 12 10:25:59 myhost kernel: [ 0.190007] NMI watchdog enabled, takes one hw-pmu counter.
Mar 12 10:25:59 myhost kernel: [ 0.210005] #2
Mar 12 10:25:59 myhost kernel: [ 0.306665] NMI watchdog enabled, takes one hw-pmu counter.
Mar 12 10:25:59 myhost kernel: [ 0.313317] Brought up 3 CPUs
Mar 12 10:25:59 myhost kernel: [ 0.313319] Total of 3 processors activated (12662.21 BogoMIPS).
Mar 12 10:25:59 myhost kernel: [ 0.315139] devtmpfs: initialized
Mar 12 10:25:59 myhost kernel: [ 0.317377] PM: Registering ACPI NVS region at bffce000 (139264 bytes)
Mar 12 10:25:59 myhost kernel: [ 0.317603] print_constraints: dummy:
Mar 12 10:25:59 myhost kernel: [ 0.317656] NET: Registered protocol family 16
Mar 12 10:25:59 myhost kernel: [ 0.317767] TOM: 00000000c0000000 aka 3072M
Mar 12 10:25:59 myhost kernel: [ 0.317784] TOM2: 0000000140000000 aka 5120M
Mar 12 10:25:59 myhost kernel: [ 0.317805] Extended Config Space enabled on 1 nodes
Mar 12 10:25:59 myhost kernel: [ 0.317819] ACPI: bus type pci registered
Mar 12 10:25:59 myhost kernel: [ 0.317893] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Mar 12 10:25:59 myhost kernel: [ 0.317896] PCI: not using MMCONFIG
Mar 12 10:25:59 myhost kernel: [ 0.317898] PCI: Using configuration type 1 for base access
Mar 12 10:25:59 myhost kernel: [ 0.317899] PCI: Using configuration type 1 for extended access
Mar 12 10:25:59 myhost kernel: [ 0.318408] bio: create slab <bio-0> at 0
Mar 12 10:25:59 myhost kernel: [ 0.318408] ACPI: Added _OSI(Module Device)
Mar 12 10:25:59 myhost kernel: [ 0.318408] ACPI: Added _OSI(Processor Device)
Mar 12 10:25:59 myhost kernel: [ 0.318408] ACPI: Added _OSI(3.0 _SCP Extensions)
Mar 12 10:25:59 myhost kernel: [ 0.318408] ACPI: Added _OSI(Processor Aggregator Device)
Mar 12 10:25:59 myhost kernel: [ 0.321075] ACPI: Executed 1 blocks of module-level executable AML code
Mar 12 10:25:59 myhost kernel: [ 0.322673] ACPI: Interpreter enabled
Mar 12 10:25:59 myhost kernel: [ 0.322677] ACPI: (supports S0 S1 S4 S5)
Mar 12 10:25:59 myhost kernel: [ 0.322695] ACPI: Using IOAPIC for interrupt routing
Mar 12 10:25:59 myhost kernel: [ 0.322713] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Mar 12 10:25:59 myhost kernel: [ 0.323739] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
Mar 12 10:25:59 myhost kernel: [ 0.353905] ACPI: No dock devices found.
Mar 12 10:25:59 myhost kernel: [ 0.353908] HEST: Table not found.
Mar 12 10:25:59 myhost kernel: [ 0.353912] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Mar 12 10:25:59 myhost kernel: [ 0.354095] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Mar 12 10:25:59 myhost kernel: [ 0.354265] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
Mar 12 10:25:59 myhost kernel: [ 0.354268] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
Mar 12 10:25:59 myhost kernel: [ 0.354271] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
Mar 12 10:25:59 myhost kernel: [ 0.354273] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
Mar 12 10:25:59 myhost kernel: [ 0.354276] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xdfffffff]
Mar 12 10:25:59 myhost kernel: [ 0.354279] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
Mar 12 10:25:59 myhost kernel: [ 0.355812] pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
Mar 12 10:25:59 myhost kernel: [ 0.359989] pci 0000:00:09.0: PCI bridge to [bus 02-02]
Mar 12 10:25:59 myhost kernel: [ 0.360030] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
Mar 12 10:25:59 myhost kernel: [ 0.360061] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
Mar 12 10:25:59 myhost kernel: [ 0.360429] pci0000:00: Requesting ACPI _OSC control (0x1d)
Mar 12 10:25:59 myhost kernel: [ 0.360569] pci0000:00: ACPI _OSC control (0x1d) granted
Mar 12 10:25:59 myhost kernel: [ 0.365142] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
Mar 12 10:25:59 myhost kernel: [ 0.365238] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *11
Mar 12 10:25:59 myhost kernel: [ 0.365330] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
Mar 12 10:25:59 myhost kernel: [ 0.365424] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
Mar 12 10:25:59 myhost kernel: [ 0.365515] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
Mar 12 10:25:59 myhost kernel: [ 0.365606] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
Mar 12 10:25:59 myhost kernel: [ 0.365697] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
Mar 12 10:25:59 myhost kernel: [ 0.365788] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
Mar 12 10:25:59 myhost kernel: [ 0.365882] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *7
Mar 12 10:25:59 myhost kernel: [ 0.365973] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
Mar 12 10:25:59 myhost kernel: [ 0.366073] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
Mar 12 10:25:59 myhost kernel: [ 0.366165] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
Mar 12 10:25:59 myhost kernel: [ 0.366256] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
Mar 12 10:25:59 myhost kernel: [ 0.366346] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
Mar 12 10:25:59 myhost kernel: [ 0.366437] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
Mar 12 10:25:59 myhost kernel: [ 0.366528] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
Mar 12 10:25:59 myhost kernel: [ 0.366618] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
Mar 12 10:25:59 myhost kernel: [ 0.366728] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
Mar 12 10:25:59 myhost kernel: [ 0.366818] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
Mar 12 10:25:59 myhost kernel: [ 0.366818] vgaarb: loaded
Mar 12 10:25:59 myhost kernel: [ 0.366818] vgaarb: bridge control possible 0000:02:00.0
Mar 12 10:25:59 myhost kernel: [ 0.366818] PCI: Using ACPI for IRQ routing
Mar 12 10:25:59 myhost kernel: [ 0.374202] pci 0000:00:01.3: no compatible bridge window for [mem 0xfec80000-0xfecfffff]
Mar 12 10:25:59 myhost kernel: [ 0.374361] NetLabel: Initializing
Mar 12 10:25:59 myhost kernel: [ 0.374363] NetLabel: domain hash size = 128
Mar 12 10:25:59 myhost kernel: [ 0.374365] NetLabel: protocols = UNLABELED CIPSOv4
Mar 12 10:25:59 myhost kernel: [ 0.374382] NetLabel: unlabeled traffic allowed by default
Mar 12 10:25:59 myhost kernel: [ 0.381236] pnp: PnP ACPI init
Mar 12 10:25:59 myhost kernel: [ 0.381259] ACPI: bus type pnp registered
Mar 12 10:25:59 myhost kernel: [ 0.382933] system 00:07: [io 0x04d0-0x04d1] has been reserved
Mar 12 10:25:59 myhost kernel: [ 0.382939] system 00:07: [io 0x0800-0x080f] has been reserved
Mar 12 10:25:59 myhost kernel: [ 0.382942] system 00:07: [io 0x4000-0x407f] has been reserved
Mar 12 10:25:59 myhost kernel: [ 0.382945] system 00:07: [io 0x4080-0x40ff] has been reserved
Mar 12 10:25:59 myhost kernel: [ 0.382948] system 00:07: [io 0x4400-0x447f] has been reserved
Mar 12 10:25:59 myhost kernel: [ 0.382950] system 00:07: [io 0x4480-0x44ff] has been reserved
Mar 12 10:25:59 myhost kernel: [ 0.382953] system 00:07: [io 0x4800-0x487f] has been reserved
Mar 12 10:25:59 myhost kernel: [ 0.382955] system 00:07: [io 0x4880-0x48ff] has been reserved
Mar 12 10:25:59 myhost kernel: [ 0.382958] system 00:07: [io 0x4c00-0x4c7f] has been reserved
Mar 12 10:25:59 myhost kernel: [ 0.382960] system 00:07: [io 0x4c80-0x4cff] has been reserved
Mar 12 10:25:59 myhost kernel: [ 0.382964] system 00:07: [mem 0x000d0000-0x000d3fff window] has been reserved
Mar 12 10:25:59 myhost kernel: [ 0.382966] system 00:07: [mem 0x000d4000-0x000d7fff window] has been reserved
Mar 12 10:25:59 myhost kernel: [ 0.382969] system 00:07: [mem 0x000de000-0x000dffff window] has been reserved
Mar 12 10:25:59 myhost kernel: [ 0.382973] system 00:07: [mem 0xfec80000-0x1fd93ffff] could not be reserved
Mar 12 10:25:59 myhost kernel: [ 0.382975] system 00:07: [mem 0xfefe0000-0xfefe01ff] has been reserved
Mar 12 10:25:59 myhost kernel: [ 0.382978] system 00:07: [mem 0xfefe1000-0xfefe1fff] has been reserved
Mar 12 10:25:59 myhost kernel: [ 0.382981] system 00:07: [mem 0xfee01000-0xfeefffff] has been reserved
Mar 12 10:25:59 myhost kernel: [ 0.382984] system 00:07: [mem 0xffb80000-0xffffffff] could not be reserved
Mar 12 10:25:59 myhost kernel: [ 0.383127] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
Mar 12 10:25:59 myhost kernel: [ 0.383130] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
Mar 12 10:25:59 myhost kernel: [ 0.383413] system 00:0b: [io 0x0a00-0x0adf] has been reserved
Mar 12 10:25:59 myhost kernel: [ 0.383416] system 00:0b: [io 0x0ae0-0x0aef] has been reserved
Mar 12 10:25:59 myhost kernel: [ 0.383507] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
Mar 12 10:25:59 myhost kernel: [ 0.383708] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
Mar 12 10:25:59 myhost kernel: [ 0.383710] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
Mar 12 10:25:59 myhost kernel: [ 0.383713] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
Mar 12 10:25:59 myhost kernel: [ 0.383716] system 00:0d: [mem 0x00100000-0xbfffffff] could not be reserved
Mar 12 10:25:59 myhost kernel: [ 0.383719] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
Mar 12 10:25:59 myhost kernel: [ 0.383953] pnp: PnP ACPI: found 14 devices
Mar 12 10:25:59 myhost kernel: [ 0.383955] ACPI: ACPI bus type pnp unregistered
Mar 12 10:25:59 myhost kernel: [ 0.390613] Switching to clocksource acpi_pm
Mar 12 10:25:59 myhost kernel: [ 0.390674] pci 0000:00:01.3: BAR 0: assigned [mem 0xd0000000-0xd007ffff]
Mar 12 10:25:59 myhost kernel: [ 0.390679] pci 0000:00:01.3: BAR 0: set to [mem 0xd0000000-0xd007ffff] (PCI address [0xd0000000-0xd007ffff])
Mar 12 10:25:59 myhost kernel: [ 0.390683] pci 0000:00:04.0: PCI bridge to [bus 01-01]
Mar 12 10:25:59 myhost kernel: [ 0.390691] pci 0000:00:09.0: PCI bridge to [bus 02-02]
Mar 12 10:25:59 myhost kernel: [ 0.390694] pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
Mar 12 10:25:59 myhost kernel: [ 0.390698] pci 0000:00:09.0: bridge window [mem 0xdc000000-0xdfffffff]
Mar 12 10:25:59 myhost kernel: [ 0.390702] pci 0000:00:09.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
Mar 12 10:25:59 myhost kernel: [ 0.390706] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
Mar 12 10:25:59 myhost kernel: [ 0.390712] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
Mar 12 10:25:59 myhost kernel: [ 0.390824] NET: Registered protocol family 2
Mar 12 10:25:59 myhost kernel: [ 0.391013] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mar 12 10:25:59 myhost kernel: [ 0.392601] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
Mar 12 10:25:59 myhost kernel: [ 0.395867] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Mar 12 10:25:59 myhost kernel: [ 0.396352] TCP: Hash tables configured (established 524288 bind 65536)
Mar 12 10:25:59 myhost kernel: [ 0.396355] TCP reno registered
Mar 12 10:25:59 myhost kernel: [ 0.396368] UDP hash table entries: 2048 (order: 4, 65536 bytes)
Mar 12 10:25:59 myhost kernel: [ 0.396419] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
Mar 12 10:25:59 myhost kernel: [ 0.396554] NET: Registered protocol family 1
Mar 12 10:25:59 myhost kernel: [ 0.460124] pci 0000:00:00.0: Found enabled HT MSI Mapping
Mar 12 10:25:59 myhost kernel: [ 0.460179] pci 0000:00:00.0: Found enabled HT MSI Mapping
Mar 12 10:25:59 myhost kernel: [ 0.460246] pci 0000:00:00.0: Found enabled HT MSI Mapping
Mar 12 10:25:59 myhost kernel: [ 0.460312] pci 0000:00:00.0: Found enabled HT MSI Mapping
Mar 12 10:25:59 myhost kernel: [ 0.460377] pci 0000:00:00.0: Found enabled HT MSI Mapping
Mar 12 10:25:59 myhost kernel: [ 0.460449] pci 0000:00:00.0: Found enabled HT MSI Mapping
Mar 12 10:25:59 myhost kernel: [ 0.460526] pci 0000:00:00.0: Found enabled HT MSI Mapping
Mar 12 10:25:59 myhost kernel: [ 0.460609] pci 0000:00:00.0: Found enabled HT MSI Mapping
Mar 12 10:25:59 myhost kernel: [ 0.460711] Unpacking initramfs...
Mar 12 10:25:59 myhost kernel: [ 0.572196] Freeing initrd memory: 10584k freed
Mar 12 10:25:59 myhost kernel: [ 0.577900] PCI-DMA: Disabling AGP.
Mar 12 10:25:59 myhost kernel: [ 0.581545] PCI-DMA: aperture base @ b4000000 size 65536 KB
Mar 12 10:25:59 myhost kernel: [ 0.581547] PCI-DMA: using GART IOMMU.
Mar 12 10:25:59 myhost kernel: [ 0.581551] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
Mar 12 10:25:59 myhost kernel: [ 0.585462] IBS: LVT offset 1 assigned
Mar 12 10:25:59 myhost kernel: [ 0.585486] perf: AMD IBS detected (0x00000007)
Mar 12 10:25:59 myhost kernel: [ 0.585671] audit: initializing netlink socket (disabled)
Mar 12 10:25:59 myhost kernel: [ 0.585695] type=2000 audit(1331547952.583:1): initialized
Mar 12 10:25:59 myhost kernel: [ 0.598511] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Mar 12 10:25:59 myhost kernel: [ 0.625385] VFS: Disk quotas dquot_6.5.2
Mar 12 10:25:59 myhost kernel: [ 0.625456] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Mar 12 10:25:59 myhost kernel: [ 0.625563] msgmni has been set to 7911
Mar 12 10:25:59 myhost kernel: [ 0.625796] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Mar 12 10:25:59 myhost kernel: [ 0.625843] io scheduler noop registered
Mar 12 10:25:59 myhost kernel: [ 0.625845] io scheduler deadline registered
Mar 12 10:25:59 myhost kernel: [ 0.625880] io scheduler cfq registered (default)
Mar 12 10:25:59 myhost kernel: [ 0.626497] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
Mar 12 10:25:59 myhost kernel: [ 0.626501] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
Mar 12 10:25:59 myhost kernel: [ 0.626523] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
Mar 12 10:25:59 myhost kernel: [ 0.626541] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
Mar 12 10:25:59 myhost kernel: [ 0.626710] ERST: Table is not found!
Mar 12 10:25:59 myhost kernel: [ 0.626712] GHES: HEST is not enabled!
Mar 12 10:25:59 myhost kernel: [ 0.626780] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Mar 12 10:25:59 myhost kernel: [ 0.647333] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar 12 10:25:59 myhost kernel: [ 0.883974] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar 12 10:25:59 myhost kernel: [ 0.943516] Linux agpgart interface v0.103
Mar 12 10:25:59 myhost kernel: [ 0.943585] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Mar 12 10:25:59 myhost kernel: [ 0.945853] serio: i8042 KBD port at 0x60,0x64 irq 1
Mar 12 10:25:59 myhost kernel: [ 0.945870] serio: i8042 AUX port at 0x60,0x64 irq 12
Mar 12 10:25:59 myhost kernel: [ 0.946084] mousedev: PS/2 mouse device common for all mice
Mar 12 10:25:59 myhost kernel: [ 0.946138] rtc_cmos 00:02: RTC can wake from S4
Mar 12 10:25:59 myhost kernel: [ 0.946297] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
Mar 12 10:25:59 myhost kernel: [ 0.946334] rtc0: alarms up to one year, y3k, 114 bytes nvram
Mar 12 10:25:59 myhost kernel: [ 0.946347] cpuidle: using governor ladder
Mar 12 10:25:59 myhost kernel: [ 0.946350] cpuidle: using governor menu
Mar 12 10:25:59 myhost kernel: [ 0.946589] TCP cubic registered
Mar 12 10:25:59 myhost kernel: [ 0.946729] NET: Registered protocol family 10
Mar 12 10:25:59 myhost kernel: [ 0.947209] NET: Registered protocol family 17
Mar 12 10:25:59 myhost kernel: [ 0.947213] Registering the dns_resolver key type
Mar 12 10:25:59 myhost kernel: [ 0.947383] registered taskstats version 1
Mar 12 10:25:59 myhost kernel: [ 0.960176] rtc_cmos 00:02: setting system clock to 2012-03-12 10:25:53 UTC (1331547953)
Mar 12 10:25:59 myhost kernel: [ 0.960226] Initializing network drop monitor service
Mar 12 10:25:59 myhost kernel: [ 0.961665] Freeing unused kernel memory: 736k freed
Mar 12 10:25:59 myhost kernel: [ 0.961941] Write protecting the kernel read-only data: 8192k
Mar 12 10:25:59 myhost kernel: [ 0.964578] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Mar 12 10:25:59 myhost kernel: [ 0.968163] Freeing unused kernel memory: 1636k freed
Mar 12 10:25:59 myhost kernel: [ 0.971309] Freeing unused kernel memory: 660k freed
Mar 12 10:25:59 myhost [ 0.983845] udevd[66]: starting version 181
Mar 12 10:25:59 myhost kernel: [ 1.019251] usbcore: registered new interface driver usbfs
Mar 12 10:25:59 myhost kernel: [ 1.019287] usbcore: registered new interface driver hub
Mar 12 10:25:59 myhost kernel: [ 1.019363] usbcore: registered new device driver usb
Mar 12 10:25:59 myhost kernel: [ 1.020457] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Mar 12 10:25:59 myhost kernel: [ 1.022334] SCSI subsystem initialized
Mar 12 10:25:59 myhost kernel: [ 1.024094] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
Mar 12 10:25:59 myhost kernel: [ 1.024122] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
Mar 12 10:25:59 myhost kernel: [ 1.024181] ehci_hcd 0000:00:02.1: EHCI Host Controller
Mar 12 10:25:59 myhost kernel: [ 1.024230] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
Mar 12 10:25:59 myhost kernel: [ 1.024274] ehci_hcd 0000:00:02.1: debug port 1
Mar 12 10:25:59 myhost kernel: [ 1.024314] ehci_hcd 0000:00:02.1: irq 23, io mem 0xdbf7ec00
Mar 12 10:25:59 myhost kernel: [ 1.033384] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
Mar 12 10:25:59 myhost kernel: [ 1.033711] hub 1-0:1.0: USB hub found
Mar 12 10:25:59 myhost kernel: [ 1.033717] hub 1-0:1.0: 10 ports detected
Mar 12 10:25:59 myhost kernel: [ 1.034730] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Mar 12 10:25:59 myhost kernel: [ 1.036435] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
Mar 12 10:25:59 myhost kernel: [ 1.036458] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 22 (level, low) -> IRQ 22
Mar 12 10:25:59 myhost kernel: [ 1.036513] ohci_hcd 0000:00:02.0: OHCI Host Controller
Mar 12 10:25:59 myhost kernel: [ 1.036536] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
Mar 12 10:25:59 myhost kernel: [ 1.036579] ohci_hcd 0000:00:02.0: irq 22, io mem 0xdbf7f000
Mar 12 10:25:59 myhost kernel: [ 1.088876] hub 2-0:1.0: USB hub found
Mar 12 10:25:59 myhost kernel: [ 1.088885] hub 2-0:1.0: 10 ports detected
Mar 12 10:25:59 myhost kernel: [ 1.090175] scsi0 : pata_amd
Mar 12 10:25:59 myhost kernel: [ 1.090309] scsi1 : pata_amd
Mar 12 10:25:59 myhost kernel: [ 1.091064] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfff0 irq 14
Mar 12 10:25:59 myhost kernel: [ 1.091067] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfff8 irq 15
Mar 12 10:25:59 myhost kernel: [ 1.094698] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
Mar 12 10:25:59 myhost kernel: [ 1.094721] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
Mar 12 10:25:59 myhost kernel: [ 1.095105] scsi2 : sata_nv
Mar 12 10:25:59 myhost kernel: [ 1.095190] scsi3 : sata_nv
Mar 12 10:25:59 myhost kernel: [ 1.095306] ata3: SATA max UDMA/133 cmd 0xdd80 ctl 0xdd00 bmdma 0xdb00 irq 21
Mar 12 10:25:59 myhost kernel: [ 1.095309] ata4: SATA max UDMA/133 cmd 0xdc00 ctl 0xdb80 bmdma 0xdb08 irq 21
Mar 12 10:25:59 myhost kernel: [ 1.095559] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
Mar 12 10:25:59 myhost kernel: [ 1.095574] sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20
Mar 12 10:25:59 myhost kernel: [ 1.095843] scsi4 : sata_nv
Mar 12 10:25:59 myhost kernel: [ 1.095923] scsi5 : sata_nv
Mar 12 10:25:59 myhost kernel: [ 1.096025] ata5: SATA max UDMA/133 cmd 0xda80 ctl 0xda00 bmdma 0xd880 irq 20
Mar 12 10:25:59 myhost kernel: [ 1.096028] ata6: SATA max UDMA/133 cmd 0xd980 ctl 0xd900 bmdma 0xd888 irq 20
Mar 12 10:25:59 myhost kernel: [ 1.417172] ata5: SATA link down (SStatus 0 SControl 300)
Mar 12 10:25:59 myhost kernel: [ 1.560059] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Mar 12 10:25:59 myhost kernel: [ 1.566979] ata3.00: ATA-8: SAMSUNG HD502HJ, 1AJ10001, max UDMA/133
Mar 12 10:25:59 myhost kernel: [ 1.566983] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Mar 12 10:25:59 myhost kernel: [ 1.573620] ata3.00: configured for UDMA/133
Mar 12 10:25:59 myhost kernel: [ 1.573817] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD502HJ 1AJ1 PQ: 0 ANSI: 5
Mar 12 10:25:59 myhost kernel: [ 1.586714] Refined TSC clocksource calibration: 2109.721 MHz.
Mar 12 10:25:59 myhost kernel: [ 1.586720] Switching to clocksource tsc
Mar 12 10:25:59 myhost kernel: [ 2.040045] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Mar 12 10:25:59 myhost kernel: [ 2.046813] ata4.00: ATAPI: HL-DT-ST DVDRAM GH22NS70, EX00, max UDMA/100
Mar 12 10:25:59 myhost kernel: [ 2.060169] ata4.00: configured for UDMA/100
Mar 12 10:25:59 myhost kernel: [ 2.068605] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS70 EX00 PQ: 0 ANSI: 5
Mar 12 10:25:59 myhost kernel: [ 2.390479] ata6: SATA link down (SStatus 0 SControl 300)
Mar 12 10:25:59 myhost kernel: [ 2.397239] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Mar 12 10:25:59 myhost kernel: [ 2.397316] sd 2:0:0:0: [sda] Write Protect is off
Mar 12 10:25:59 myhost kernel: [ 2.397338] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Mar 12 10:25:59 myhost kernel: [ 2.413212] sda: sda1 sda2 sda3 sda4
Mar 12 10:25:59 myhost kernel: [ 2.413653] sd 2:0:0:0: [sda] Attached SCSI disk
Mar 12 10:25:59 myhost kernel: [ 2.423220] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Mar 12 10:25:59 myhost kernel: [ 2.423226] cdrom: Uniform CD-ROM driver Revision: 3.20
Mar 12 10:25:59 myhost kernel: [ 2.818552] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
Mar 12 10:25:59 myhost kernel: [ 2.818556] EXT4-fs (sda3): write access will be enabled during recovery
Mar 12 10:25:59 myhost kernel: [ 2.844947] EXT4-fs (sda3): recovery complete
Mar 12 10:25:59 myhost kernel: [ 2.845244] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
Mar 12 10:25:59 myhost [ 4.125862] udevd[177]: starting version 181
Mar 12 10:25:59 myhost kernel: [ 5.513480] EXT4-fs (sda3): re-mounted. Opts: (null)
Mar 12 10:25:59 myhost kernel: [ 5.619429] Adding 265068k swap on /dev/sda2. Priority:-1 extents:1 across:265068k
Mar 12 10:26:01 myhost ntpd[546]: ntpd [email protected] Thu Mar 1 21:32:56 UTC 2012 (1)
Mar 12 10:26:01 myhost ntpd[547]: proto: precision = 0.115 usec
Mar 12 10:26:01 myhost ntpd[547]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
Mar 12 10:26:01 myhost ntpd[547]: Listen and drop on 1 v6wildcard :: UDP 123
Mar 12 10:26:01 myhost ntpd[547]: Listen normally on 2 lo 127.0.0.1 UDP 123
Mar 12 10:26:01 myhost ntpd[547]: Listen normally on 3 lo ::1 UDP 123
Mar 12 10:26:01 myhost ntpd[547]: peers refreshed
Mar 12 10:26:01 myhost ntpd[547]: Listening on routing socket on fd #20 for interface updates
Mar 12 10:26:02 myhost kernel: [ 9.760264] mtrr: base(0xdd000000) is not aligned on a size(0xe00000) boundary
Mar 12 10:26:57 myhost dbus[419]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
Mar 12 12:41:56 myhost kernel: [ 0.000000] Initializing cgroup subsys cpuset
Mar 12 12:41:56 myhost kernel: [ 0.000000] Initializing cgroup subsys cpu
Mar 12 12:41:56 myhost kernel: [ 0.000000] Linux version 3.2.6-2-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Feb 16 10:10:02 CET 2012
Mar 12 12:41:56 myhost kernel: [ 0.000000] Command line: root=/dev/disk/by-uuid/03876ae1-14ad-42f4-920b-9d949d3cb434 ro
Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-provided physical RAM map:
Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffc0000 (usable)
Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000bffc0000 - 00000000bffce000 (ACPI data)
Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000bffce000 - 00000000bfff0000 (ACPI NVS)
Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfffe000 (reserved)
Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
Mar 12 12:41:56 myhost kernel: [ 0.000000] NX (Execute Disable) protection: active
Mar 12 12:41:56 myhost kernel: [ 0.000000] DMI present.
Mar 12 12:41:56 myhost kernel: [ 0.000000] No AGP bridge found
Mar 12 12:41:56 myhost kernel: [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
Mar 12 12:41:56 myhost kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Mar 12 12:41:56 myhost kernel: [ 0.000000] last_pfn = 0xbffc0 max_arch_pfn = 0x400000000
Mar 12 12:41:56 myhost kernel: [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
Mar 12 12:41:56 myhost kernel: [ 0.000000] Using GB pages for direct mapping
Mar 12 12:41:56 myhost kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000bffc0000
Mar 12 12:41:56 myhost kernel: [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
Mar 12 12:41:56 myhost kernel: [ 0.000000] RAMDISK: 37d6c000 - 37ff0000
Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: RSDP 00000000000fa1f0 00014 (v00 ACPIAM)
Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: RSDT 00000000bffc0000 00038 (v01 021709 RSDT1317 20090217 MSFT 00000097)
Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: FACP 00000000bffc0200 00084 (v01 021709 FACP1317 20090217 MSFT 00000097)
Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: DSDT 00000000bffc04a0 04880 (v01 1ADKR 1ADKR017 00000017 INTL 20051117)
Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: FACS 00000000bffce000 00040
Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: APIC 00000000bffc0390 00080 (v01 021709 APIC1317 20090217 MSFT 00000097)
Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: MCFG 00000000bffc0410 0003C (v01 021709 OEMMCFG 20090217 MSFT 00000097)
Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: WDRT 00000000bffc0450 00047 (v01 021709 NV-WDRT 20090217 MSFT 00000097)
Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: OEMB 00000000bffce040 00071 (v01 021709 OEMB1317 20090217 MSFT 00000097)
Mar 12 12:41:56 myhost kernel: [ 0.000000] Scanning NUMA topology in Northbridge 24
Mar 12 12:41:56 myhost kernel: [ 0.000000] No NUMA configuration found
Mar 12 12:41:56 myhost kernel: [ 0.000000] Faking a node at 0000000000000000-0000000140000000
Mar 12 12:41:56 myhost kernel: [ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
Mar 12 12:41:56 myhost kernel: [ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
Mar 12 12:41:56 myhost kernel: [ 0.000000] Zone PFN ranges:
Mar 12 12:41:56 myhost kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000
Mar 12 12:41:56 myhost kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000
Mar 12 12:41:56 myhost kernel: [ 0.000000] Normal 0x00100000 -> 0x00140000
Mar 12 12:41:56 myhost kernel: [ 0.000000] Movable zone start PFN for each node
Mar 12 12:41:56 myhost kernel: [ 0.000000] early_node_map[3] active PFN ranges
Mar 12 12:41:56 myhost kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f
Mar 12 12:41:56 myhost kernel: [ 0.000000] 0: 0x00000100 -> 0x000bffc0
Mar 12 12:41:56 myhost kernel: [ 0.000000] 0: 0x00100000 -> 0x00140000
Mar 12 12:41:56 myhost kernel: [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
Mar 12 12:41:56 myhost kernel: [ 0.000000] If you got timer trouble try acpi_use_timer_override
Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
Mar 12 12:41:56 myhost kernel: [ 0.000000] IOAPIC[0]: apic_id 3, version 17, address 0xfec00000, GSI 0-23
Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
Mar 12 12:41:56 myhost kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Mar 12 12:41:56 myhost kernel: [ 0.000000] SMP: Allowing 4 CPUs, 1 hotplug CPUs
Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bffc0000 - 00000000bffce000
Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bffce000 - 00000000bfff0000
Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bfff0000 - 00000000bfffe000
Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bfffe000 - 00000000fec00000
Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
Mar 12 12 -
My Keyboard and Mouse freeze after connecting USB device
In the past few weeks I got this situation where my MacBook Air (13" Late 2010 model) would stop responding to the keyboard and trackpad after I connect a USB device (like an external hard disk, or even my iPhone).
I found one (quite inconvenient) solution: if I connect an external USB mouse and keyboard they work, and after a while the built in trackpad and keyboard start working again. But if I do not have an external mouse and keyboard around me, I am quite stuck and only a reboot fixes the situation.
Any idea what might be causing this, or if there is any solution? It is clearly a software issue, as the hardware can be returned to normal state after reboot.
Note: I have the latest OS - Mac OS X Lion 10.7.3 (11D50) and regularly update my software.I have the same issue, on the same model (late 2010 13" MBA).
I haven't been able to figure out a solution either. Strangely, I recently bought a USB external drive and it *never* causes a freeze upon connection. Only smaller devices (iPod, iPad, FitBit, USB stick) cause it. I need to reboot the computer with the device attached to be able to access it. -
No USB keyboard or mouse after a partial update
I'm in a jam, and need some help.
I have an archlinux desktop installation here, and decided to do an update since one hadn't been done for a few months. I did a pacman -Syuw to get all the necessary files, and since there was some conflicts I fixed those up. Also, pacman itself needed to be updated, which I did. So at this point I only updated pacman and libreoffice (which had some plugin conflict) and the dependencies of those.
Since I figure its better to do KDE updates from the console only, I decided to log off, and do a console login so that KDE wouldn't be running during the update. However, I accidentally did a Shutdown instead.. Which I assumed would be fine anyway, but now when it boots none of my USB devices are working.
I can go into BIOS settings, and keyboard is working fine, but as soon as arch starts loading, the keyboard and mouse are completely disabled... like there is no power getting to them. Lights on mouse and keyboard are completely off.
I do not have a CD burner here to make a bootable CD, and this particular PC is picky about booting from a USB drive. I'm kind of stuck.
Oh, I CAN edit the grub config. Keyboard is working fine at that point. Is there anything I can add to the grub commands to force it to load usb modules?
The system does boot up, and normally I have SSH servers running, but for some reason they are not accepting connections either. About all I can do is ping the box (from my laptop).
EDIT: Seems like the system got a new IP when it restarted, So I dont know what it's new IP address is. Looking for it now to see if I can SSH into it.
Ok, I just noticed that there is a failure on bootup about libpcre, but that doesnt seem to stop anything. I just found an old PS2 keyboard that I plugged in, and I can now type up until X loads, and then that keyboard shuts off too. When it sits at the console login for about 1 second, I can begin typing, but then kdm fires up and I can no longer type anything.
Thanks.
Last edited by cjdj (2012-04-17 03:58:07)Append "1" to the grub entry that you use to boot. This will start the system at runlevel 1. Login normally. Run pacman -Syu to fully update the system. Try reboot.
Edit: Chg runlevel
Last edited by skunktrader (2012-04-17 04:08:53)
Maybe you are looking for
-
Error in activation of update rules.
Hi, I get an error - 'IC=0PP_C02 IS=2LIS_04_P_MATNR error when checking the update rules' while activating the update rules in BI content. Rest all the data flow is activated except update rules. Can anyone throw some light on this? Thanks & Regards,
-
In App Purchase in Beta App - Error Code: 805a01f4
Hello everyone, i'm trying to implement In-App-Purchase for my game. The Store opens fine, but when i click on install the following error is given: SERVICE NOT AVAILABLE Marketplace isn't available at the moment. Please check back in a bit. Error co
-
New firefox does not indicate that a website is safe to proceed
Previous Firefox sessions were taking very long to start. I then installed a latest copy. This sees to start faster but I have lost some valuable settings. Important one was to indicate that website is fase to open. It has checked its status. Unfortu
-
Partner block entry interface in PCUI
Hi, I want to make sure that the partners entered in the partner tab are restricted i.e only one partner maximum can be entered for a partner function say sold to party and for attendees he can enter upto maximum 10 and if more are entered then it sh
-
Call stored proc problem (SQL exception)
Hello I have a stored procedure with one param as follows: PROCEDURE test1 (xnrid IN VARCHAR2) This stored procedure is created in package known as "smart". I tried to call my stored proc via toplink as follows: UnitOfWork uow= dbSession.ac