Lofs performance
Hi,
I have Solaris 11 mounting 2 luns as ufs. I then create 3 zones and export these 2 luns as lofs to the zones in order to avoid using nfs for resource sharing. When I run my jobs within non-global zones that write to file systems sitting on lofs based luns, I get very high '%b and at times %w values' in the output of iostat run within global zone.
I have 2 questions as a result:
1) what does iostat show for lofs based file systems in a global zone?
2) is there a performance penalty to pay if ufs file system is mounted as lofs to non-global zones?
Any help will be highly appreciated.
Thank you,
Igor
The Cisco management framework is consistent with the Telecommunication Management Network (TMN). Like TMN, Cisco uses a five-layer model that defines both the logical division and the communication between areas of the service provider's business operations and management processes. Consistent with this architecture, Cisco has developed a suite of service, network, and element management solutions.
http://www.cisco.com/en/US/products/hw/switches/ps1925/products_technical_reference_chapter09186a00800e9791.html
Similar Messages
-
A lof of "Trace dumping is performing" in RAC instances
Hi,
I have Oracle 9i RAC (9.2.0.5) with 2 nodes. Suddenly, there is a lot of "Trace dumping is performing" generated in background dump directory of both nodes.
I could not find any ORA- error that caused these trace dump. Does anyone have any idea?
Below is some part of the alert logs file contents:
Mon Jun 1 13:45:48 2009
Trace dumping is performing id=[cdmp_20090601134547]
Mon Jun 1 13:45:51 2009
Trace dumping is performing id=[cdmp_20090601134551]
Mon Jun 1 13:45:55 2009
Trace dumping is performing id=[cdmp_20090601134554]
Mon Jun 1 13:49:00 2009
Trace dumping is performing id=[cdmp_20090601134859]
Mon Jun 1 13:50:08 2009
Trace dumping is performing id=[cdmp_20090601135008]
Mon Jun 1 14:01:05 2009
Trace dumping is performing id=[cdmp_20090601140105]
Mon Jun 1 14:01:09 2009
Trace dumping is performing id=[cdmp_20090601140108]
Mon Jun 1 14:01:12 2009
Trace dumping is performing id=[cdmp_20090601140112]
Mon Jun 1 14:01:16 2009
Trace dumping is performing id=[cdmp_20090601140115]
Mon Jun 1 14:08:45 2009
Trace dumping is performing id=[cdmp_20090601140845]
Mon Jun 1 14:16:17 2009
Completed checkpoint up to RBA [0x34e92.2.10], SCN: 0x0858.d68637a6
Mon Jun 1 14:16:40 2009
Trace dumping is performing id=[cdmp_20090601141639]
Mon Jun 1 14:16:43 2009
Trace dumping is performing id=[cdmp_20090601141642]
Mon Jun 1 14:16:46 2009
Trace dumping is performing id=[cdmp_20090601141646]
Mon Jun 1 14:16:50 2009
Trace dumping is performing id=[cdmp_20090601141649]
Mon Jun 1 14:31:33 2009
Trace dumping is performing id=[cdmp_20090601143133]
Thanks & Regards,
TarmanMOS note 290767.1
Is this the case? -
"Check Statistics" in the Performance tab. How to see SELECT statement?
Hi,
In a previous mail on SDN, it was explained (see below) that the "Check Statistics" in the Performance tab, under Manage in the context of a cube, executes the SELECT stament below.
Would you happen to know how to see the SELECT statements that the "Check Statistics" command executes as mentioned in the posting below?
Thanks
====================================
When you hit the Check Statistics tab, it isn't just the fact tables that are checked, but also all master data tables for all the InfoObjects (characteristics) that are in the cubes dimensions.
Checking nbr of rows inserted, last analyzed dates, etc.
SELECT
T.TABLE_NAME, M.PARTITION_NAME, TO_CHAR (T.LAST_ANALYZED, 'YYYYMMDDHH24MISS'), T.NUM_ROWS,
M.INSERTS, M.UPDATES, M.DELETES, M.TRUNCATED
FROM
USER_TABLES T LEFT OUTER JOIN USER_TAB_MODIFICATIONS M ON T.TABLE_NAME = M.TABLE_NAME
WHERE
T.TABLE_NAME = '/BI0/PWBS_ELEMT' AND M.PARTITION_NAME IS NULL
When you Refresh the stats, all the tables that need stats refreshed, are refreshed again. SInce InfoCube queries access the various master data tables in quereis, it makes sense that SAP would check their status.
In looking at some of the results in 7.0, I'm not sure that the 30 day check is being doen as it was in 3.5. This is one area SAP retooled quite a bit.
Yellow only indicates that there could be a problem. You could have stale DB stats on a table, but if they don't cause the DB optimizer to choose a poor execution plan, then it has no impact.
Good DB stats are vital to query performance and old stats could be responsible for poor performance. I'm just syaing that the Statistics check yellow light status is not a definitive indicator.
If your DBA has BRCONNECT running daily, you really should not have to worry about stats collection on the BW side except in cases immediately after large loads /deletes, and the nightly BRCONNECT hasn't run.
BRCONNECT should produce a lof every time it runs showing you all the tables that it determeined should have stats refreshed. That might be worth a review. It should be running daily. If it is not being run, then you need to look at running stats collection from the BW side, either in Process Chains or via InfoCube automatisms.
Best bet is to use ST04 to get Explain Plans of a poor running InfoCube query and then it can be reviewed to see where the time is being spent and whether stats ate a culprit.Hi,
Thanks, this is what I came up with:
st05,
check SQL Trace, Activate Trace
Now, in Rsa1
on Cube, Cube1,
Manage, Performance tab, Check Statistics
Again, back to st05
Deactivate Trace
then click on Displace Trace
Now, in the trace display, after scanning through the output,
how do I see the SELECT statements that the "Check Statistics" command executes
I will appreciate your help. -
Whole Root / Sparse Root fusion // lofs problem
Hello everybody!
Actually i am getting probz with installations of software in sparse-root zones.
Especially caused by the lofs-techniques regarding /usr , /usr/bin and /usr/local, required for linking back the executables to the home folders of users in Sparse-Root zone.
are there any workarounds to obtain a functional setup for this cases or override the lofs-problem for linkage .
Read only after install to /usr/bin is o.k. but for Software install in Sparse Root it`s needed.
Encountered this problems with Oracle and DirX installs.
Whole-root zone obligation and the inherit disk usage would be unacceptable.
Would be running out of disk space.
Thanks for Replies !Is there any option setable to temporarily override the "ro" lofs for an inherited-pkg-dir?
-fs-special?
The Application i want to install is DIRX for LDAP management.
It links the executable from /usr/bin to /export/home/ldap before finising the Installation.
The Installation is cacelled by the installer if the links cant be set.
After install there is no problem with "ro" access to the executable..
If i had to do all zones as whole-root zones i would use Xen on an Intel or amd based machine.
Sparse-root zone model is posible with Xen, but implies a lot of work.
The decision to solaris was due to low performance of Linux Kernels on Sparc compared with a native Solaris, the hardware of a Fire 880 was built for.
Any HowTo`s to a Workaround, e.g. a comand string ?( 4meNxDummy? ;) ) -
Recent exchange upgrade, worse performance
We recently (last week) had an upgrade to ADSL2+ on our exchange. All went smoothly. At first, it looked like we'd be getting pretty impressive results. Unfortunately, it seems that all we are doing is rushing to a roadblock and we get worse average performance than we did on ADSLMAX. We've left it a week to settle down and the numbers have been pretty consistent since the first couple of days.
Basically, we seem to be getting up to 18Mbps in the wee hours, but during normal times of day, it seems to average out at about 2-4Mbps, which is worse than the 6Mbps we used to get. Upload speed is better though. Used to get about 384kbps, now it's a gnats under 1Mbps and solid at that.
Here are the numbers from the router:
Connection tmie 3 days 14h
Downstream 21.73Mbps
Upstream 1.152Mbps
Noise margin (D/U) 2.6dB/6.0dB
Line attenuation (D/U) 8.1dB/5.4dB
Output power (D/U) 19.8dBm/12.4dBm
FEC events (D/U) 2283042/69
CRC events (D/U) 130/4
LOF 0
LOS 0
LOP 0
HEC events (D/U) 848/8
Error seconds (Local/Remote) 293/5
Would welcome thoughts from the community, and my own personal VPN
TFLOK, just tried the test, basic figures just over 6Mbps down, just under 1Mbps up, tried the troubleshooting but it crashed with a server error (hence the vauge numbers).
Just tired a few using Ookla, download speeds range from 8 down to 3Mbps, upload pretty solid around the 0.92Mbps number (which seems fine and consistent with the signalling rate - i.e. not contention limited).
Router still showing this:
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
4 days, 11:53:38
Downstream:
21.73 Mbps
Upstream:
1.152 Mbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
2.6 dB / 6.0 dB
Line attenuation (Down/Up):
8.1 dB / 5.4 dB
Output power (Down/Up):
19.8 dBm / 12.4 dBm
FEC Events (Down/Up):
2558652 / 82
CRC Events (Down/Up):
132 / 4
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
848 / 10
Error Seconds (Local/Remote):
295 / 5
Will try some more tests when I get home (again) tomorrow morning. I predict speeds will be consistent and towards the top end of what I have already seen to date, namely up around 18Mbps.
TBH, while it's nice to have a big headline number, I'd be much happier with a lower but stable one like I used to get before the "upgrade".
Cheers -
How to understand Lofs,Loss,Lols,Lprs,ES
hi all,
In the course of testing performance management of DSLAM, I need to simulate some events to
increase MIB counters, such as adslAtucPerfCurr15MinLofs,adslAtucPerfCurr15MinLols,etc, so
these counters can reach the threshold, trap info can be gotten. But I am confused with
definition of Lofs,Loss,Lols,Lprs,ES and other channel performance data.
1.The definition of adslAtucPerfCurr15MinLofs is "Count of seconds in the current 15-minute
interval when there was Loss of Framing.", it is same for Loss,Lols,Lprs. I don't understand
these definitions well, how can I control the happen of these events, the tools I have are
Line simulator,SmartBits (from spirent);
2.The definition of AtucChanPerfCurr15MinRxBlks is "Count of all encoded blocks received on
this
channel, within the current 15-minute interval.", what's the meaning of encoded blocks? The
definition of AtucChanPerfCurr15MinCorrectedBlks is "Count of all encoded blocks received
with corrected errors on this channel, within the current 15-minute interval.", how to judge
the encoded blocks have errors or not, checksum? or CRC?
Thanks in advance
Best RegardsThe Cisco management framework is consistent with the Telecommunication Management Network (TMN). Like TMN, Cisco uses a five-layer model that defines both the logical division and the communication between areas of the service provider's business operations and management processes. Consistent with this architecture, Cisco has developed a suite of service, network, and element management solutions.
http://www.cisco.com/en/US/products/hw/switches/ps1925/products_technical_reference_chapter09186a00800e9791.html -
ALI Scripting - Performance Issues
We are using ALI scripting to raise events so that other portlets in the page can listen to the events and also passing some data to other portlets using "PTPortlet.setSessionPref" scripting API. In my local testing, the scripting is taking just 0.3 seconds, however when we deployed this code to common portal which has few other portlets, the scripting is taking 5 seconds. Does any one know if there are any known best practices around ALI scripting to avoid performance issues especially to transfer events between portlets?
Thanks
SampathHi, I would like to provide additional information on the performance issue we are facing with ALI scripting. In the code highlighted below, we are using “setSessionPref” methods to set values in session variables using ALI scripting APIs and raising events for IPC.
var prefName = 'selectionString';
var prefValue = xmlFile;
var gpConfigValue = "<%=gpPromptsConfigID%>";
PTPortlet.setSessionPref(prefName,prefValue);
PTPortlet.setSessionPref('gpFormObj',frmObj.name);
PTPortlet.setSessionPref('gpPromptsConfigID', gpConfigValue);
myportlet$$PORTLET_ID$$.raiseEvent('onSelectionSubmitFormObj',false);
myportlet$$PORTLET_ID$$.raiseEvent('onSelectionSubmit', false);
This code does not take lot of time(less than a second) to execute in my local machine however, it takes lof of time (around 5 seconds) in integrated development environment.
After lot of debugging, I observed that if I change “PTPortalContext.GET_SESSION_PREFS_URL” to point to http://localhost:7001 instead of integrated development environemnt, the processing time is considerably reduced. This code below is inserted automatically by ALUI in every portal page. Does any one know the signficance of the below code automaitcally inserted by ALUI and how it can impact IPC.
// Define PTPortalContext for CSAPI
PTPortalContext = new Object();
PTPortalContext.GET_SESSION_PREFS_URL = 'http://dcdev.pg.com/portal/server.pt?space=SessionPrefs&control=SessionPrefs&action=getprefs';
PTPortalContext.SET_SESSION_PREFS_URL = 'http://dcdev.pg.com/portal/server.pt?space=SessionPrefs&control=SessionPrefs&action=setprefs';
Thanks
Sampath -
I have created a quote report with narratives around the opportunity, opportunity-product, and account information. The report contains a pivot table.
I'm getting very hit or miss performance results on the report. Sometimes the report runs faster for all opportunities compared to when its prompted with an opty id from a web link.
Any thoughts? There doesn't seem to be one column that makes a difference.
Also this is not an analytical report as the quotes need to be generated same day.Hi Shaik,
Please remove all the join select queries and use 'for all entries' varaiant of the select query. Check whether you can create and use indexes in ur queries.
Thanks and Regards,
Saurabh Chhatre -
I have a performance issue with a query - it would be something like -
select col1,col2, sum(col3), get_val(col_4)
from table1
where
get_val(col_4) is not null
group by col1,col2, get_val(col_4)
I have simplified this but it is something similar. This works great - performance is great. Now I commented out the where clause as I needed to populate null values - and that's it the query does not retrieve the resultset - it keeps running forever. With the where clause it comes back in 60 seconds. There is only one row out of 560 rows that has null value for col_4 which i need to display.
Any help is appreciated.The only difference I notice between the two sqls is HASH(UNIQUE) -
with IS NOT NULL in where clause -
SELECT STATEMENT ALL_ROWS 1598 1 209
HASH(UNIQUE) 1598 1 209
HASH(GROUP BY) 1598 1 209
When is not null is removed from the where clause -
SELECT STATEMENT ALL_ROWS 1598 1 206
HASH(GROUP BY) 1598 1 206
I'm guessing that the index is being used in the first scenario and not in the second. Any idea/suggestion as to how to over come this?
Thanks -
Issues with WebForm performance
Hi,
We had migrated a new application from UAT to PROD and we encounter webform performance issues with the following actions..
After login, the first form you open it is
always slow. After this you can switch from one form to another without a
delay.
Then once you change any data – the next time
you access a form it gets delayed.
The point to be noted is, it doesnt have any performance issues in the UAT environment and the configuration settings,essbase cache settings are all the same. We did try to move the EPM system to a new server to see if this is a hardware issue but no luck, the performance issues still exist. The consumption of the CPU/memory has been checked and it is proved that the form opening delay has nothing to do with lack of memory.
The JVM head settings is set up at 4GB which is infact higher than that of the UAT environment(2GB).
runs on Windows server2008,11.1.2.1.600 EPM serve, has planning,reporting,foundation on one server (32GB ram) and essbase on another server (32GB ram). Any help is appreciated.
Please find attached the planning logs below and there is nothing mentioned in the hyperionplanning error logs.-----------------------------------------------------------------------------------------------------------------------------------------------------------------
<Nov 5, 2013 8:05:43 PM CET> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Nov 5, 2013 8:05:43 PM CET> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Nov 5, 2013 8:05:44 PM CET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.2-11-135406-1.6.0_20-20100624-2119-windows-x86_64 from Oracle Corporation>
<Nov 5, 2013 8:05:46 PM CET> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 >
<Nov 5, 2013 8:05:48 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Nov 5, 2013 8:05:48 PM CET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Nov 5, 2013 8:05:48 PM CET> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\logs\Planning0.log is opened. All server side log events will be written to this file.>
<Nov 5, 2013 8:06:22 PM CET> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Nov 5, 2013 8:06:28 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Nov 5, 2013 8:06:28 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Calling getDomainConfiguration()
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Calling getRuntimeService()
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
return com.bea:Name=EPMSystem,Type=Domain
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Domain location is 'C:\Oracle\Middleware\user_projects\domains\EPMSystem'
Calling getRuntimeService()
return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Checking C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\registry_update.xml file
EPM_ORACLE_HOME: C:\Oracle\Middleware\EPMSystem11R1
Template for PLANNING#11.1.2.0: C:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_planning_11.1.2.1.jar
Dependencies for C:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_planning_11.1.2.1.jar: []
BPMUI shared webapp not referenced from PLANNING#11.1.2.0
Application name: PLANNING#11.1.2.0
Application source: HyperionPlanning.ear
Server name: Planning0
Server port: 8300
Server SSL port: 8343
Application context: HyperionPlanning
Registry product type: PLANNING_PRODUCT
Registry physical web application type: PLANNING_WEBAPP
weblogic.Name property is 'Planning0', seems to be WebLogic mode
registry.isRegistryDatabaseCreated()true
Registry was initialized sucessfully
Executing pre custom update for PLANNING#11.1.2.0
EPM_ORACLE_INSTANCE: C:\Oracle\Middleware\user_projects\epmsystem1
Physical Web App found
Web app already linked to some application server: false
The registry was not modifyed because it already containse all sturctures
Web app is already linked to the logical web app
No needs to run custom updater for PLANNING#11.1.2.0
loggingUpdatePLANNING.block file exist or the system is running in the Fusion mode, skipping logging.xml configuration
Planning locale: en_US
<Nov 5, 2013 8:06:39 PM CET> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Nov 5, 2013 8:06:39 PM CET> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
<Nov 5, 2013 8:06:39 PM CET> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of Planning.>
<Nov 5, 2013 8:07:09 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Nov 5, 2013 8:07:09 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Nov 5, 2013 8:07:09 PM CET> <Notice> <Cluster> <BEA-000162> <Starting "async" replication service with remote cluster address "null">
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Oracle\Middleware\jrockit_160_20\jre\lib\security\cacerts.>
<Nov 5, 2013 8:07:10 PM CET> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
Version: V3
Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 512 bits
modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
public exponent: 65537
Validity: [From: Thu Mar 21 21:12:27 CET 2002,
To: Tue Mar 22 21:12:27 CET 2022]
Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
SerialNumber: [ 33f10648 fcde0deb 4199921f d64537f4]
Certificate Extensions: 1
[1]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Algorithm: [MD5withRSA]
Signature:
0000: 9D 26 4C 29 C8 91 C3 A7 06 C3 24 6F AE B4 F8 82 .&L)......$o....
0010: 80 4D AA CB 7C 79 46 84 81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
0020: E9 B7 D9 7C E2 23 33 A4 B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
0030: CB 21 20 88 81 21 DB AC 90 54 D8 7D 79 63 23 3C .! ..!...T..yc#<
] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[3]" is now listening on 127.0.0.1:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on fe80:0:0:0:0:5efe:a53:4816:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[4]" is now listening on 0:0:0:0:0:0:0:1:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.83.72.22:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on 127.0.0.1:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on 0:0:0:0:0:0:0:1:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on fe80:0:0:0:0:ffff:ffff:fffe:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on fe80:0:0:0:0:5efe:a53:4816:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on fe80:0:0:0:0:ffff:ffff:fffe:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.83.72.22:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Nov 5, 2013 8:07:10 PM CET> <Warning> <Server> <BEA-002611> <Hostname "WIPLPRD01.svc.unicc.org", maps to multiple IP addresses: 10.83.72.22, 0:0:0:0:0:0:0:1>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "Planning0" for domain "EPMSystem" running in Production Mode>
<Nov 5, 2013 8:07:12 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Nov 5, 2013 8:07:12 PM CET> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
using java.library.path: C:\Oracle\Middleware\EPMSystem11R1/products/Planning/lib64;C:\Oracle\Middleware\EPMSystem11R1/bin;C:\Oracle\Middleware\EPMSystem11R1/common/EssbaseRTC-64/11.1.2.0/bin;C:\Oracle\MIDDLE~1\patch_wls1034\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\x64;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JROCKI~1\jre\bin;C:\Oracle\MIDDLE~1\JROCKI~1\bin;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\x64\oci920_8
EPM_ORACLE_HOME (C:\Oracle\Middleware\EPMSystem11R1) is set from JVM property "EPM_ORACLE_HOME".
using Java property for Hyperion Home C:\Oracle\Middleware\EPMSystem11R1
EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from JVM property[EPM_ORACLE_INSTANCE].
Reaquired task list lease: Tue Nov 05 20:11:49 CET 2013: 1383678709156
Seeking ESAPI.properties
Found in 'org.owasp.esapi.resources' directory: C:\Oracle\Middleware\EPMSystem11R1\products\Planning\config\esapi\ESAPI.properties
Loaded 'ESAPI.properties' properties file
Seeking validation.properties
Found in 'org.owasp.esapi.resources' directory: C:\Oracle\Middleware\EPMSystem11R1\products\Planning\config\esapi\validation.properties
Loaded 'validation.properties' properties file
Seeking antisamy-esapi.xml
Found in 'org.owasp.esapi.resources' directory: C:\Oracle\Middleware\EPMSystem11R1\products\Planning\config\esapi\antisamy-esapi.xml
EnterData_Inner Processing Time:424
2013-11-05 20:14:47,454 INFO Thread-51 calcmgr.launch - Date/Time Started: 2013/11/05:20:14:47.452 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: WPA_Count By Planning user: wipoadmin Values entered for run-time prompts: [Variable] Wrk_Scenario:"Work_Plan_2014"[Variable] Funds:"Regular"[Variable] Units:"0001"
- Date/Time Started: 2013/11/05:20:14:47.452 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: WPA_Count By Planning user: wipoadmin Values entered for run-time prompts: [Variable] Wrk_Scenario:"Work_Plan_2014"[Variable] Funds:"Regular"[Variable] Units:"0001"
2013-11-05 20:14:54,066 INFO Thread-51 calcmgr.launch - Date/Time Ended: 2013/11/05:20:14:54.066 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: WPA_Count By Planning user: wipoadmin.
- Date/Time Ended: 2013/11/05:20:14:54.066 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: WPA_Count By Planning user: wipoadmin.
EnterData_Inner Processing Time:64
EnterData_Inner Processing Time:15
EnterData_Inner Processing Time:359
EnterData_Inner Processing Time:2
EnterData_Inner Processing Time:53
EnterData_Inner Processing Time:4
EnterData_Inner Processing Time:7
EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from JVM property[EPM_ORACLE_INSTANCE].
EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from JVM property[EPM_ORACLE_INSTANCE].
EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from JVM property[EPM_ORACLE_INSTANCE].
Setting HBR Mode to: 2
In lookupBRLWA()
Found HBR product = ESSBASE_PRODUCT
Found HBR product = ESSBASE_PRODUCT
Found HBR product = ESSBASE_PRODUCT
HBR LWA Component = Default
Default HBR = http://WIPLPRD01.svc.unicc.org:19000/eas
In getDBDetails()
Found HBR product = ESSBASE_PRODUCT
In lookupBRLWA()
Found HBR product = ESSBASE_PRODUCT
Found HBR product = ESSBASE_PRODUCT
=2013-11-05 20:35:08,234 WARN [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.security.HbrSecurityAPI - Error retrieving user by identity
- Error retrieving user by identity
Embedded HBR initialized.
EnterData_Inner Processing Time:6
EnterData_Inner Processing Time:867
[Tue Nov 05 20:35:33 CET 2013] Planning successfully notified HBR repository.
EnterData_Inner Processing Time:7
2013-11-05 20:40:38,613 INFO Thread-67 calcmgr.launch - Date/Time Started: 2013/11/05:20:40:38.606 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: NonPersonnel_Calc By Planning user: wipoadmin Values entered for run-time prompts: [Variable] Funds:"Regular"[Variable] Units:"0001"[Variable] Wrk_Scenario:"Work_Plan_2014"
- Date/Time Started: 2013/11/05:20:40:38.606 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: NonPersonnel_Calc By Planning user: wipoadmin Values entered for run-time prompts: [Variable] Funds:"Regular"[Variable] Units:"0001"[Variable] Wrk_Scenario:"Work_Plan_2014"
2013-11-05 20:40:47,241 INFO Thread-67 calcmgr.launch - Date/Time Ended: 2013/11/05:20:40:47.241 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: NonPersonnel_Calc By Planning user: wipoadmin.
- Date/Time Ended: 2013/11/05:20:40:47.241 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: NonPersonnel_Calc By Planning user: wipoadmin.
EnterData_Inner Processing Time:44
EnterData_Inner Processing Time:2
EnterData_Inner Processing Time:525
EnterData_Inner Processing Time:1
Reaquired task list lease: Tue Nov 05 20:41:49 CET 2013: 1383680509246I already replied there but it seems no moderator is willing to approve my reply so it never shows up.
So I'll try replying in here instead:
I never thought it could be an emulator issue, I thought I had done something wrong to begin with. So I take having performance issues with tiled layer is not a common problem I suppose?
I'm using MOTODEV SDK platform, A1200 model (motorola). -
Apple DVI to Video Adapter performance issues in Lion
I'm an active Apple DVI to Video Adapter user for a couple of years already and everything worked perfectly well until I've upgraded to Lion.
Everything on my TV screen is lagging now, even mouse pointer, and there is no change to watch any movie like that.
Does anyone have the same issue? Maybe someone could give me an advice of what could I do in order to improve graphics performance on TV screen using Apple DVI to Video Adapter? I'm using late 2007 MBP with 8600M GT video adapter.I am having the exact same problem. I have a late 2007 MBP. I use it everyday where I teach. I use the adapter to project on a large white screen using S-Video. SInce the Lion update, it is very slow and has even completely crashed my computer a few times. I realize the MBP is getting a bit dated, but the difference between Snow Leopard & Lion is remarkable.
-
hai
how to create an vendor performance report which display purchase order issued to a vendor, material supplied delivery times, payment terms, prices during a period of time.
for this report what are the tables and fields we have to use pls give me sample report..
thank you..Hi,
Against the RFQ's vendor submit quotations and the Based on the RFQ's data we have to compare the different Vendors with the respective data like terms and prices
Fetch the data of all RFQ's from EKKO and EKPO tables
and take the EKKO-KNUMV field and pass to KONV table and fetch the different prices based on the Condition types for each RFQ and put it in a tabular format and compare.
see the sample code
*& Report ZRFQ_COMP
*& Quotation Comparison Report
REPORT ZRFQ_COMP no standard page heading line-size 187 line-count 35.
*&Tables
Tables : ekko,
ekpo,
konp,
a016.
*&Data Decleration
Data : v_pos type i value 19.
Data : begin of it_rfq occurs 0,
ebeln type ekko-ebeln,
ekorg type ekko-ekorg,
lifnr type ekko-lifnr,
matnr type ekpo-matnr,
WERKS type ekpo-WERKS,
end of it_rfq.
Data : begin of it_a016 occurs 0,
ebeln type ekko-ebeln,
knumh type knumh,
end of it_a016.
Data : begin of it_a363 occurs 0,
werks type werks,
lifnr type lifnr,
matnr type matnr,
knumh type knumh,
end of it_a363.
Data : begin of it_pr_details occurs 0,
knumh type knumh,
kschl type kschl,
kbetr type kwert,
end of it_pr_details.
Data : begin of it_final occurs 0,
ebeln type ebeln,
lifnr type lifnr,
name1 type lfa1-name1,
pb00 type kbetr,
zpac type kbetr,
zb00 type kbetr,
ZIN1 type kbetr,
JEC1 type kbetr,
JHX1 type kbetr,
JMOP type kbetr,
JMX1 type kbetr,
JMX3 type kbetr,
JSEP TYPE KBETR,
JVRD type kbetr,
end of it_final.
Data : begin of it_vendorname occurs 0,
lifnr type lifnr,
name1 type lfa1-name1,
end of it_vendorname.
*&Selection Screen
Selection-screen: begin of block blk1 with frame title text-001.
parameters : p_matnr like ekpo-matnr obligatory.
select-options : s_ebeln for ekko-ebeln,
s_ekorg for ekko-ekorg,
s_lifnr for ekko-lifnr.
Selection-screen: end of block blk1.
*&Start-of-Selection.
Start-of-selection.
Select ekko~ebeln
ekko~ekorg
ekko~lifnr
ekpo~matnr
ekpo~werks
into table it_rfq
from ekko
inner join ekpo
on ekkoebeln eq ekpoebeln
where ekko~ebeln in s_ebeln
and ekko~ekorg in s_ekorg
and ekko~lifnr in s_lifnr
and ekpo~matnr eq p_matnr
and ekko~bstyp eq 'A'.
if sy-subrc eq 0.
*--> Condition number from A tables.
Perform get_connum.
*--> Getting the Pricing Details from Konp Table.
Perform get_prices.
*--> Populate Vendor Name.
Perform pop_vendor_name.
*--> Populating the Final Internal table for Report.
Perform pop_final_tab.
else.
message 'Purchase Document does not exist' type 'E'.
endif.
*&End-of-Selection.
End-of-Selection.
write :/ sy-vline,
2 'Vendor Number',
19 sy-vline.
v_pos = 19.
loop at it_final.
write at v_pos sy-vline.
v_pos = v_pos + 1.
write at v_pos it_final-lifnr.
v_pos = v_pos + 35.
endloop.
write at: v_pos sy-vline,
/(v_pos) sy-uline.
write :/ sy-vline,
2 'Gross Price',
19 sy-vline.
v_pos = 19.
loop at it_final.
write at v_pos sy-vline.
v_pos = v_pos + 20.
write at v_pos it_final-pb00.
v_pos = v_pos + 16.
endloop.
write at: v_pos sy-vline,
/(v_pos) sy-uline.
write :/ sy-vline,
2 'Packing & Forward',
19 sy-vline.
v_pos = 19.
loop at it_final.
write at v_pos sy-vline.
v_pos = v_pos + 20.
write at v_pos it_final-zpac.
v_pos = v_pos + 16.
endloop.
write at: v_pos sy-vline,
/(v_pos) sy-uline.
write :/ sy-vline,
2 'Surcharge',
19 sy-vline.
v_pos = 19.
loop at it_final.
write at v_pos sy-vline.
v_pos = v_pos + 20.
write at v_pos it_final-zb00.
v_pos = v_pos + 16.
endloop.
write at: v_pos sy-vline,
/(v_pos) sy-uline.
write :/ sy-vline,
2 'Installation',
19 sy-vline.
v_pos = 19.
loop at it_final.
write at v_pos sy-vline.
v_pos = v_pos + 20.
write at v_pos it_final-zin1.
v_pos = v_pos + 16.
endloop.
write at: v_pos sy-vline,
/(v_pos) sy-uline.
write :/ sy-vline,
2 'Ed cess on BED%',
19 sy-vline.
v_pos = 19.
loop at it_final.
write at v_pos sy-vline.
v_pos = v_pos + 20.
write at v_pos it_final-jec1.
v_pos = v_pos + 16.
endloop.
write at: v_pos sy-vline,
/(v_pos) sy-uline.
write :/ sy-vline,
2 'A/P Secess set off',
19 sy-vline.
v_pos = 19.
loop at it_final.
write at v_pos sy-vline.
v_pos = v_pos + 20.
write at v_pos it_final-jhx1.
v_pos = v_pos + 16.
endloop.
write at: v_pos sy-vline,
/(v_pos) sy-uline.
write :/ sy-vline,
2 'Basic Excise Duty',
19 sy-vline.
v_pos = 19.
loop at it_final.
write at v_pos sy-vline.
v_pos = v_pos + 20.
write at v_pos it_final-zpac.
v_pos = v_pos + 16.
endloop.
write at: v_pos sy-vline,
/(v_pos) sy-uline.
write :/ sy-vline,
2 'A/P BED set off',
19 sy-vline.
v_pos = 19.
loop at it_final.
write at v_pos sy-vline.
v_pos = v_pos + 20.
write at v_pos it_final-jmx1.
v_pos = v_pos + 16.
endloop.
write at: v_pos sy-vline,
/(v_pos) sy-uline.
write :/ sy-vline,
2 'Ecess % set off',
19 sy-vline.
v_pos = 19.
loop at it_final.
write at v_pos sy-vline.
v_pos = v_pos + 20.
write at v_pos it_final-jmx3.
v_pos = v_pos + 16.
endloop.
write at: v_pos sy-vline,
/(v_pos) sy-uline.
write :/ sy-vline,
2 'Sec ED Cess on BED',
19 sy-vline.
v_pos = 19.
loop at it_final.
write at v_pos sy-vline.
v_pos = v_pos + 20.
write at v_pos it_final-jsep.
v_pos = v_pos + 16.
endloop.
write at: v_pos sy-vline,
/(v_pos) sy-uline.
write :/ sy-vline,
2 'VAT%',
19 sy-vline.
v_pos = 19.
loop at it_final.
write at v_pos sy-vline.
v_pos = v_pos + 20.
write at v_pos it_final-jvrd.
v_pos = v_pos + 16.
endloop.
write at: v_pos sy-vline,
/(v_pos) sy-uline.
*&Top-of-Page.
Top-of-Page.
format color 1.
Write: 'Material Number :' color 1, p_matnr color 1.
loop at it_final.
v_pos = v_pos + 1.
v_pos = v_pos + 35.
endloop.
write at: /(v_pos) sy-uline,/ sy-vline,2 'Vendor Name'.
v_pos = 19.
loop at it_final.
write at v_pos sy-vline.
v_pos = v_pos + 1.
write at v_pos it_final-name1.
v_pos = v_pos + 35.
endloop.
write at: v_pos sy-vline,
/(v_pos) sy-uline.
*& Form get_connum
Condition number from A tables
form get_connum .
Select EVRTN
knumh
from a016
into table it_a016
for all entries in it_rfq
where EVRTN eq it_rfq-ebeln.
Select werks
lifnr
matnr
knumh
from a363
into table it_a363
for all entries in it_rfq
where werks eq it_rfq-werks
and lifnr eq it_rfq-lifnr
and matnr eq it_rfq-matnr.
endform. " get_connum
*& Form get_prices
Getting the Pricing Details from Konp Table.
form get_prices .
if not it_a016[] is initial.
select knumh
kschl
kbetr
from konp
into table it_pr_details
for all entries in it_a016
where knumh eq it_a016-knumh.
endif.
if not it_a363[] is initial.
select knumh
kschl
kbetr
from konp
appending table it_pr_details
for all entries in it_a016
where knumh eq it_a016-knumh.
endif.
endform. " get_prices
*& Form pop_final_tab
Populating the Final Internal table for Report
form pop_final_tab .
data : l_subrc like sy-subrc.
sort it_a016 by ebeln.
loop at it_rfq.
clear l_subrc.
read table it_a016 with key ebeln = it_rfq-ebeln
binary search.
if sy-subrc eq 0.
loop at it_pr_details where knumh eq it_a016-knumh.
it_final-ebeln = it_rfq-ebeln.
it_final-lifnr = it_rfq-lifnr.
read table it_vendorname with
key lifnr = it_rfq-lifnr.
it_final-name1 = it_vendorname-name1.
case it_pr_details-kschl.
when 'PBOO'.
it_final-pb00 = it_pr_details-kbetr.
if it_pr_details-kbetr eq 0.
clear it_final.
continue.
endif.
when 'ZPAC'.
it_final-zpac = it_pr_details-kbetr.
when 'ZB00'.
it_final-ZB00 = it_pr_details-kbetr.
when 'ZIN1'.
it_final-ZIN1 = it_pr_details-kbetr.
endcase.
endloop.
else.
l_subrc = sy-subrc.
endif.
read table it_a363 with key lifnr = it_rfq-lifnr
werks = it_rfq-werks
matnr = it_rfq-matnr.
if sy-subrc eq 0.
loop at it_pr_details where knumh eq it_a016-knumh.
it_final-ebeln = it_rfq-ebeln.
it_final-lifnr = it_rfq-lifnr.
read table it_vendorname with
key lifnr = it_rfq-lifnr.
it_final-name1 = it_vendorname-name1.
case it_pr_details-kschl.
when 'JEC1'.
it_final-JEC1 = it_pr_details-kbetr.
when 'JHX1'.
it_final-JHX1 = it_pr_details-kbetr.
when 'JMOP'.
it_final-JMOP = it_pr_details-kbetr.
when 'JMX1'.
it_final-JMX1 = it_pr_details-kbetr.
when 'JMX3'.
it_final-JMX3 = it_pr_details-kbetr.
when 'JSEP'.
it_final-JSEP = it_pr_details-kbetr.
when 'JVRD'.
it_final-JVRD = it_pr_details-kbetr.
endcase.
endloop.
elseif l_subrc ne 0.
continue.
endif.
append it_final.
clear it_final.
endloop.
endform. " pop_final_tab
*& Form pop_vendor_name
Populate Vendor Name
form pop_vendor_name .
if not it_rfq[] is initial.
Select lifnr
name1
from lfa1
into table it_vendorname
where lifnr eq it_rfq-lifnr.
endif.
endform. " pop_vendor_name
Reward points if useful
Regards
Anji -
FI-CA events to improve performance
Hello experts,
Does anybody use the FI-CA events to improve the extraction performance for datasources 0FC_OP_01 and 0FC_CI_01 (open and cleared items)?
It seems that this specific exits associated to BW events have been developped especially to improve performance.
Any documentation, guide should be appreciate.
Thanks.
Thibaud.Thanks to all for the replies
@Sybrand
Please answer first whether the column is stored in a separate lobsegment.
No. Table,Index,LOB,LOB index uses the same TS. I missed adding this point( moving to separate TS) as part of table modifications.
@Hemant
There's a famous paper / blog post about CLOBs and Database Flashback. If I find it, I'll post the URL.
Is this the one you are referring to
http://laimisnd.wordpress.com/2011/03/25/lobs-and-flashback-database-performance/
By moving the CLOB column to different block size , I will test the performance improvement it gives and will share the results.
We dont need any data from this table. XML file contains details about finger prints and once the application server completes the job , XML data is deleted from this table.
So no need of backup/recovery operations for this table. Client will be able to replay the transactions if any problem occurs.
@Billy
We are not performing XML parsing on DB side. Gets the XML data from client -> insert into table -> client selects from table -> Upon successful completion of the Job from client ,XML data gets deleted.
Regarding binding of LOB from client side, will check on that side also to reduce round trips.
By changing the blocksize, I can keep db_32K_cache_size=2G and keep this table in CACHE. If I directly put my table to CACHE, it will age out all other operation from buffer which makes things worse for us.
This insert is part of transaction( Registration of a finger print) and this is the only statement taking time as of now compared to other statements in the transaction.
Thanks,
Arun -
Report performance is very slow
Hi all,
I have a table with 25 million rows. I create a report on this table in which i need to use the following expression
ifnull(abc_accr_int_val,0)+ifnull(xyz_mar_val_lcy,0)
and this experession is group by asset description but the report output time is very high.Further there is no index on these columns in the database.
Please guide me that did my approach is right ??? if no what is the right approach
RegardsHi,
Thanks for such a beautiful and informative answers I really appriciated it.
I catch the problem and now want to share with U. As u know my prompt is on Date Column but I dont want to show this coloumn in my report.I only want that a user give a date and two columns are shown in report 1) asset_desc 2) total sum (which is sum of 2 columns as i discussed in this thread).
Now before...after creating the prompt on Date field I edit the report view and delete this coloumn (Date) because I only want above 2 colomns and not Date column in my report. But all sorting is performed on date bec it is in prompt (where clause). When I add Date column in my report (to show date col) the speed of the report is like sql and data fetching speed same like sql. Now tell me is there any way that I delete this col from my report but it exist in answer criteria table ??????
I have 19 Asset Desc which return by sql and answers request.
Regards -
Hi
In our production one report is running very slow, for one moth its taking 10 to 12 min earlier it was took only 2 min for month data, we are confused why itu2019s happening. Query is running on multiprovider. On cube we are using only one aggregate and in the query designer we are using Hierarchy(Active) & virtual key figure.
We have not changed anything recently on the query, why this suddenly report running very slow.
Please advice
Thanks,
Manu.Hi,
Check whether the Aggregate is up-to-date and whether it is being used by your query or not?
Also check the number of records as well, if the output is huge then it is obvious that the queries can take more time to run. As you are using Virtual Keyfigure, this generally degrades the query performance.
Regards,
rik
Maybe you are looking for
-
hello, friends. in a scenario without WMS, i split a sales order quantity into several schedule lines. in one schedule line, i specify the category as CT. all items are delivered, including the item with sked line cat CT(movement type [blank]) in a
-
Dear All, Need your help. I am posting my sample class below public static java.sql.ResultSet getData(String dbConnectStr,String dbuserID,String dbpwd,String query) throws Exception // Obtain default connection // Query all columns from the EMP table
-
Have just purchased a mini-ipad and set it up and got this invoice for downloaded itunes which I must have done a good 18 months ago and thought I had paid then can you explain this invoice now?
-
Accessing bean attributes in a JSP
Hi, I am sending a bean from a Servlet to a JSP as follows: request.setAttribute("newclientTEST", ro_client); this.getServletContext().getRequestDispatcher("/jsp/private/research/UserAdded.jsp").forward(request, response);I can then access the bean i
-
Hi, Can somebody suggest me any swithc which will work with Xsan and Xgrid (over mac pro 5.1 FC card - lsi7204ep) with 20 port, 8 port default active? P.S. One interesting thing is that on LSI home page this card (lsi7204ep) has no support to Mac OS