Log aborts, with Failed to open log file error

Flash Media server version 2.0.3 periodically fails to open
the log file and aborts logging. This seems to occur post log file
roll time as it occurs at c.01:50. Does anyone else have a similar
issue ?
I am running Falsh Media Server on windows 2003 server SE!
Any help would be much appreciated.

Are you trying to run this code from job or something? Check if account executing the package has access to the path. Also check if path value passed is correct. If its a remote system path pass it in UNC format (ie //machine/...)
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Similar Messages

  • "Extraction Failed: Cannot Open Output File" error message when installing new drivers

    Hello, I'm trying to install new drivers for my HP Photosmart C4385 Printer.  I downloaded the full feature drivers for Windows XP 32-bit, and when I start to install (extract), I get the error message:
    Extraction Failed
    Cannot Open Output File
    And the process closes.  It happens at about 85% extraction every time.
    Any idea why?  I called HP but since it is out of warranty they wanted money, which I think as absolutely ridiculous - won't even give me basic support??  Poor, poor customer service.
    This question was solved.
    View Solution.

    Hi,
    If you haven't still got the  Full Feature software installer, download it from the link below and save it to your Desktop.  If you already have it, place it on your Desktop.
    ftp://ftp.hp.com/pub/softlib/software10/COL20274/mp-53147-4/100_228_PS_AIO_02_Full_USW_enu_NB.exe
    Make sure the Printer is disconnected from your PC.
    Download and install 7-ZIP.  Once installed, right click on the software installer for your printer, select 7-Zip and choose extract files, then click Ok.
    Open the newly extracted folder and double click the setup application to start the installation ( the setup application will probably have the same icon as the original software installer you downloaded ).  Connect the printer to your PC when the software asks.
    Hope this helps.
    Best wishes,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • After Effects CS3 error: file not found -43 and TIFFIO failed to open the file

    Hello
    I am experiencing a problem with AE CS3.
    I have several TIFF sequences (with alphas) that are giving me a headache. When I import them into AE, I get an "AEGP Plugin TIFFIO: Failed to open the file" error.
    I researched the forums and found that this could be related to odd formatting of the source media (my TIFF sequence). I created these TIFFs in Maya 2008 and I have imported other sequences made with Maya into AE with no issues.
    Just to be sure, I created a Photoshop droplet that re-saved my TIFFs as Photoshop TIFFs with the same names.
    I re-imported the new Photoshop TIFF sequences (still with alphas) into AE CS3, and I get the same error.
    Any ideas? I don't know what to do next.
    Thanks,
    -------------S

    Your USB drive may have had a weird character in it's name.
    AE can't read CMYK images, that is usually the problem.
    Imported images do not have to conform to any specific sizes (unless you want to go over 30,000 x 30,000 pixels.)
    - Jonas Hummelstrand
    http://generalspecialist.com/

  • SQL Server 2012 Developer Edition will not install. Setup files don't even get copied completely. Win 8.1. ACT instance is loaded & can't be deleted. From log file: Error: Action "PreMsiTimingConfigAction" failed during execution.

    SQL Server 2012 Developer Edition will not install.  Setup files don't even get copied completely.  Win 8.1.  ACT instance is loaded & can't be deleted. From log file: Error: Action "PreMsiTimingConfigAction" failed during execution.

    Hello,
    I am glad it worked.
    Thank you for visiting MSDN forums!
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Log File Error when open MDS_Log from MDM Console

    Hi Experts,
    I am facing a problem when I tried to open MDS_Log file from MDM Console. The error message was showing as below:
    Log File Error
    Problems in the log file prevent Console from displaying its contents. To view log contents, open the log file in a seperate text editor.
    Could any of you advise me how to open the log in a seperate text editor from MDM console ?
    Thanks very much in advance
    Regards,
    Wei Dona

    Hi ,
    Just  right click on record pane of log node and select save .it will sav to user defined location in .csv format.
    Please try at yr end.
    Thanks,
    Sudhanshu

  • Conf HTTP server getting error "failed to open memory file"

    Hi,all,
    Anyone has any idea what is happening here? Should the System Admin can help? or I should check my httpd.conf file?
    Thanks,
    Ken
    ====================================
    Apache > bin/apachectl configtest
    Ouch! ap_mm_create(1048576, "/oracle/app/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/logs/mm.8359") failed
    Error: MM: mm:core: failed to open memory file (Permission denied): OS: No such file or directory
    WARNING!! Direct use of apachectl within OracleAS is
    deprecated. Using apachectl in conjunction with opmn may lead
    to unexpected behavior (such as opmn automatically restarting
    OHS after it has been shutdown using apachectl). Please use
    opmnctl (located at ORACLE_HOME/opmn/bin/opmnctl) instead.
    apachectl may not be shipped with future versions of OracleAS.
    [16:15:23]
    [ebizora01 8] Apache > ls -l logs/
    total 17212
    drwxr-x--- 4 oracle dba 1536 Jun 21 11:31 .
    -rw------- 1 oracle oinstall 0 Jun 19 12:50 mm.3482.sem
    -rw------- 1 oracle oinstall 1052672 Jun 19 12:50 mm.3482.mem
    -rw------- 1 oracle oinstall 0 Jun 19 12:46 mm.3475.sem
    -rw------- 1 oracle oinstall 1052672 Jun 19 12:46 mm.3475.mem
    -rw------- 1 oracle oinstall 0 Jun 19 12:35 mm.3388.sem
    -rw------- 1 oracle oinstall 1052672 Jun 19 12:35 mm.3388.mem
    drwxr-x--- 16 oracle dba 512 Jun 19 11:05 ..
    -rw-r--r-- 1 root root 4546 Mar 26 13:11 error_log.1174910400
    -rw------- 1 root root 0 Mar 26 13:11 mod_oc4j.4395.shm.sem
    -rw------- 1 root root 1052672 Mar 26 13:11 mod_oc4j.4395.shm.mem
    -rw-r--r-- 1 root root 5 Mar 26 13:11 httpd.pid
    -rw------- 1 root root 7405568 Mar 26 13:11 dms_metrics_4390.shm.mem
    ---Sr--r-- 1 root root 0 Mar 26 13:11 dms_metrics_4390.lock
    -rw------- 1 root root 0 Mar 26 13:11 dms_metrics_4390.shm.sem
    -rw------- 1 oracle root 0 Mar 26 13:11 mm.4390.sem
    -rw------- 1 oracle root 1052672 Mar 26 13:11 mm.4390.mem
    -rw------- 1 root root 0 Mar 26 12:32 mm.3468.sem
    -rw------- 1 root root 1052672 Mar 26 12:32 mm.3468.mem
    -rw------- 1 root root 0 Mar 26 12:30 mm.3465.sem
    -rw------- 1 root root 1052672 Mar 26 12:30 mm.3465.mem
    -rw------- 1 root root 0 Mar 26 12:28 mm.3451.sem
    -rw------- 1 root root 1052672 Mar 26 12:28 mm.3451.mem
    -rw------- 1 root root 0 Mar 26 12:26 mm.3444.sem
    -rw------- 1 root root 1052672 Mar 26 12:26 mm.3444.mem
    -rw-rw---- 1 oracle dba 477791 Mar 23 08:42 access_log.1174651200
    -rw-rw---- 1 oracle dba 894031 Mar 23 08:42 error_log.1174651200
    -rwxr-x--- 1 oracle dba 4180 Mar 23 07:37 ssl_engine_log
    -rw-rw---- 1 oracle dba 476971 Mar 22 11:11 access_log.1174564800
    -rw-rw---- 1 oracle dba 890666 Mar 22 11:11 error_log.1174564800
    -rw-rw---- 1 oracle dba 478049 Mar 20 11:19 access_log.1174392000
    -rw-rw---- 1 oracle dba 895811 Mar 20 11:19 error_log.1174392000
    -rw-rw---- 1 oracle dba 478593 Mar 15 11:10 access_log.1173960000
    -rw-rw---- 1 oracle dba 895242 Mar 15 11:10 error_log.1173960000
    -rw-rw---- 1 oracle dba 478006 Mar 13 11:15 access_log.1173787200
    -rw-rw---- 1 oracle dba 894983 Mar 13 11:15 error_log.1173787200
    -rw-rw---- 1 oracle dba 1346 Mar 12 11:07 access_log.1173700800
    -rw-rw---- 1 oracle dba 395 Mar 12 11:07 error_log.1173700800
    -rw-rw---- 1 oracle dba 1288 Mar 9 16:42 access_log.1173484800
    -rwxr-x--- 1 oracle dba 790 Mar 9 16:42 error_log.1173484800
    drwxr-x--- 3 oracle dba 512 Mar 9 16:40 fastcgi
    drwxr-x--- 2 oracle dba 512 Mar 9 16:40 oracle

    my bad. my account was not oracle, so I did not have the privelleges to write to the directory.
    This is fixed after su to oracle.
    Thanks,
    Ken

  • SP2-0310: Failed to open the file "coreins.sql"

    Hi, when i try to install apex 3.0... on oraclexe , in the file install****.log show this error SP2-0310: Failed to open the file "coreins.sql"

    You will find the answer to your problem in this forum..
    Database Installation

  • Pls Help!-'Failed to open the file'

    what do you do when an error 'failed to open the file' shows
    up when you try to open something...?
    i'm pretty sure that i am using the same version of flash as
    the one i used before to create this file.. but just on a different
    mac.
    please
    help!!!!　(ﾉ△･｡)

    yumibobcat wrote:
    > what do you do when an error 'failed to open the file'
    shows up when you try to
    > open something...?
    > i'm pretty sure that i am using the same version of
    flash as the one i used
    > before to create this file.. but just on a different
    mac.
    > please help!!!!?(????)
    >
    If you are using the same version the file was made in then
    the only thing
    left which give such error is a corrupted FLA. Beyond
    recovery once fail to
    open.
    Best Regards
    Urami
    "Never play Leap-Frog with a Unicorn."
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • Libre ~ Error 2038 "failed to open the file"

    Good morning.
    I have a Libre-eBook reader Pro.
    I have downloaded and synced from Kobo to my Libre with no problems.
    But when I try to download ebooks from the public library they download and open in Digital Editions just fine.  I drag and drop them into the bookshelf marked Libre-eBook Reader Pro.
    They show up when I turn on my ebook, but when I try to open them I get the 'failed to open the file'.
    I was also getting the Error 2038 in Digital Editions when I did the drag and drop thing.  I read through the forum and went through the steps recommended for the Nook ~ deleting the digital editions folder on my ebook and having Adobe reauthorize it.  I no longer get the 2038 error message in Adobe, but I am still unable to open the books from the library.
    I have tried deleting the books from ereader and ADE and redownloading from the Library.  Didn't help.
    Any other suggestions?
    Thanks.
    Heather

    Hi Ambs101010,
    Based on my research, the error can be caused by that the machine.config file is incorrect or corrupted. Please use the following steps to troubleshoot the issue and check if the error still occurs.
    1. Open the machine.config in Visual Studio and check if there is any syntax errors. If syntax errors exist, modify the machine.config file directly. For more details, please review this similar
    thread.
    2. If the error still persists, please follow the steps to replace the machine.config file. Another alternative method is to replace the current machine.config with the machine.config file from another computer.
          a.  Go to the folder C:\windows\Microsoft.NET\Framework\v2.0.50727\CONFIG
          b.  Rename the file machine.config to machine.config.old
          c.  Make a copy of the file machine.config.default and rename the copy to be machine.config
          d.  If your Operating System is 64-bit, go to the folder C:\windows\Microsoft.NET\Framework64\v2.0.50727\CONFIG and repeat the above steps
          e.  Reboot your computer
    Thanks,
    Lydia Zhang

  • Fail to open PDF file. Error for trying to paste in object.

    So occasionaly, i will paste in a PDF into my InDesign document and this error will pop up, Fail to open PDF file.  It's not like im opening
    the file im just trying to paste it in.  I try other pdf files and the same error comes up.  Usually this error does not happen when i am pasting in
    PDF's into my document but when one error comes up, no PDF's will work.  I have to resave my file into another format and then it will work.
    What is up with these errors that happen sometimes?
    CS5 ID 7.0.3
    P.C.

    Try it again...this time click the show options check box in the place dialog.
    Bob

  • Failed tp open .prp file while running HAL ...it says Sharing voilation ..

    Failed tp open .prp file while running HAL ...it says Sharing voilation ..
    I am running a HAL job.
    While opening .prp file it says error Sharing voilation cannot open file.
    Please help to resolve issue.

    Are you sure there are not multiple instances of the prp open, say 2 remote connections both with the file open.
    If there is a lock on the file and you are able to reboot the machine I would give that a go.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Encore CS5.5: Error Code 19 Failed to Open MUI File for Time Line when making BR ISO

    Encore CS5.5: Error Code 19 Failed to Open MUI File for Time Line.  What is this and how do I correct it.  This happens whenmaking a Blu ray ISO with Menu or no menu created
    Using: I7 Windows7  machine with Production Premium CS5.5
    I get this wether I create a menu or no menu. I have tried several times with it. I do not know what the error is or how to correct it.
    I encoded with no errors in Premiere.
    I get this jsut after Encore starts to transcode the files.
    Please help,
    Steve

    Go back to http://forums.adobe.com/community/encore and enter
    Error Code 19
    in the area just under Ask a Question
    You may now read all the previous discussions of your error... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question

  • (Forte-users) log file error

    Hi,
    We are getting this error in our log files, when we run our application.(We
    are running interpreted)
    Any help will be appreciated to solve this problem.
    Thanks
    Carole
    Attached to manager for node FORTE_DEV.
    aud Wed May 10 08:58:28 : Loading partition CSaver_cl169_Part1-router built
    on 08-May-2000 16:32:42.
    Attached to manager for node FORTE_DEV.
    aud Wed May 10 10:01:12 : Shutting down partition as requested.
    aud Wed May 10 10:01:13 : Unloaded partition CSaver_cl169_Part1-router.
    aud Wed May 10 10:01:15 : Loading partition CSaver_cl169_Part1-router built
    on 08-May-2000 16:32:42.
    Attached to manager for node FORTE_DEV.
    LbRouter::FindMembers - CAUGHT EXCEPTION attaching members from
    SYSTEM ERROR: Failed to connect or lost connection to the environment
    manager
    at FORTE_NS_ADDRESS = <Unknown>. Check that the environment manager is
    installed at that location. If it is, then check to be sure that there
    are
    enough system resources available to support this partition.
    Class: qqsp_SystemResourceException
    Error #: [601, 201]
    Detected at: qqdo_NsClient::FindObject at 1
    Error Time: Wed May 10 10:01:40
    Exception occurred (locally) on partition "CSaver_cl169_Part1-router",
    (partitionId = A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696:0x1, taskId
    =
    [A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696.9]) in application
    "CSaver_cl169", pid 698 on node FORTE_DEV in environment nbs_dev.
    SYSTEM ERROR: Attempt to send from a partition
    (A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696:0x1) that no longer
    exists.
    Class: qqsp_DistAccessException
    Error #: [601, 111]
    Detected at: qqdo_PartitionMgr::SendMsg at 1
    Error Time: Wed May 10 10:01:40
    Distributed method called: qqdo_NsServerProxy.FindObject (object
    name
    Unnamed) from partition "CSaver_cl169_Part1-router", (partitionId
    =
    A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696:0x1, taskId =
    [A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696.9]) in application
    "CSaver_cl169", pid 698 on node FORTE_DEV in environment nbs_dev
    Exception occurred (locally) on partition
    "CSaver_cl169_Part1-router",
    (partitionId = A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696:0x1,
    taskId
    = [A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696.9]) in application
    "CSaver_cl169", pid 698 on node FORTE_DEV in environment nbs_dev.
    LbRouter::FindMembers - CAUGHT EXCEPTION attaching members from
    SYSTEM ERROR: Failed to connect or lost connection to the environment
    manager
    at FORTE_NS_ADDRESS = <Unknown>. Check that the environment manager is
    installed at that location. If it is, then check to be sure that there
    are
    enough system resources available to support this partition.
    Class: qqsp_SystemResourceException
    Error #: [601, 201]
    Detected at: qqdo_NsClient::FindObject at 1
    Error Time: Wed May 10 10:01:40
    Exception occurred (locally) on partition "CSaver_cl169_Part1-router",
    (partitionId = A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696:0x1, taskId
    =
    [A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696.9]) in application
    "CSaver_cl169", pid 698 on node FORTE_DEV in environment nbs_dev.
    WARNING:
    Any unauthorised use or interception of this email is illegal. If this email
    is not intended for you, you may not copy, distribute nor disclose the
    contents to anyone. Save for bona fide company matters, the BoE Group does
    not accept any responsibility for the opinions expressed in this email.
    For further details please see: http://www.nbs.co.za/emaildisclaim.htm

    One thing to look at is this message: Check that the environment manager is
    installed at that location. If it is, then check to be sure that there are
    enough system resources available to support this partition.
    Particularly the enough systems resources part of it. I've seen this message
    before, but it's been awhile, & the problem was we didn't have enough
    virtual memory on the server & also we needed more tcp/ip connections. If I
    remember right our Unix guy had to change some of the configuration
    parameters in the kernel on the server.
    Hope this helps.
    -----Original Message-----
    From: MacDonald, Carole [mailto:CMacDonaldnbs.co.za]
    Sent: Thursday, May 11, 2000 3:53 AM
    To: forte-userslists.xpedior.com
    Subject: (Forte-users) log file error
    Hi,
    We are getting this error in our log files, when we run our application.(We
    are running interpreted)
    Any help will be appreciated to solve this problem.
    Thanks
    Carole
    Attached to manager for node FORTE_DEV.
    aud Wed May 10 08:58:28 : Loading partition CSaver_cl169_Part1-router built
    on 08-May-2000 16:32:42.
    Attached to manager for node FORTE_DEV.
    aud Wed May 10 10:01:12 : Shutting down partition as requested.
    aud Wed May 10 10:01:13 : Unloaded partition CSaver_cl169_Part1-router.
    aud Wed May 10 10:01:15 : Loading partition CSaver_cl169_Part1-router built
    on 08-May-2000 16:32:42.
    Attached to manager for node FORTE_DEV.
    LbRouter::FindMembers - CAUGHT EXCEPTION attaching members from
    SYSTEM ERROR: Failed to connect or lost connection to the environment
    manager
    at FORTE_NS_ADDRESS = <Unknown>. Check that the environment manager is
    installed at that location. If it is, then check to be sure that there
    are
    enough system resources available to support this partition.
    Class: qqsp_SystemResourceException
    Error #: [601, 201]
    Detected at: qqdo_NsClient::FindObject at 1
    Error Time: Wed May 10 10:01:40
    Exception occurred (locally) on partition "CSaver_cl169_Part1-router",
    (partitionId = A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696:0x1, taskId
    =
    [A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696.9]) in application
    "CSaver_cl169", pid 698 on node FORTE_DEV in environment nbs_dev.
    SYSTEM ERROR: Attempt to send from a partition
    (A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696:0x1) that no longer
    exists.
    Class: qqsp_DistAccessException
    Error #: [601, 111]
    Detected at: qqdo_PartitionMgr::SendMsg at 1
    Error Time: Wed May 10 10:01:40
    Distributed method called: qqdo_NsServerProxy.FindObject (object
    name
    Unnamed) from partition "CSaver_cl169_Part1-router", (partitionId
    =
    A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696:0x1, taskId =
    [A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696.9]) in application
    "CSaver_cl169", pid 698 on node FORTE_DEV in environment nbs_dev
    Exception occurred (locally) on partition
    "CSaver_cl169_Part1-router",
    (partitionId = A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696:0x1,
    taskId
    = [A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696.9]) in application
    "CSaver_cl169", pid 698 on node FORTE_DEV in environment nbs_dev.
    LbRouter::FindMembers - CAUGHT EXCEPTION attaching members from
    SYSTEM ERROR: Failed to connect or lost connection to the environment
    manager
    at FORTE_NS_ADDRESS = <Unknown>. Check that the environment manager is
    installed at that location. If it is, then check to be sure that there
    are
    enough system resources available to support this partition.
    Class: qqsp_SystemResourceException
    Error #: [601, 201]
    Detected at: qqdo_NsClient::FindObject at 1
    Error Time: Wed May 10 10:01:40
    Exception occurred (locally) on partition "CSaver_cl169_Part1-router",
    (partitionId = A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696:0x1, taskId
    =
    [A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696.9]) in application
    "CSaver_cl169", pid 698 on node FORTE_DEV in environment nbs_dev.
    WARNING:
    Any unauthorised use or interception of this email is illegal. If this email
    is not intended for you, you may not copy, distribute nor disclose the
    contents to anyone. Save for bona fide company matters, the BoE Group does
    not accept any responsibility for the opinions expressed in this email.
    For further details please see: http://www.nbs.co.za/emaildisclaim.htm
    For the archives, go to: http://lists.xpedior.com/forte-users and use
    the login: forte and the password: archive. To unsubscribe, send in a new
    email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

  • Wireless: wpa_supplicant failed to open config file [SOLVED]

    Hi,
    I'm having trouble configuring my wireless network. At the moment I'm following the guide from the wiki, I can scan for networks but when i try to connect with wpa_supplicant I get following error:
    Successfully initialized wpa_supplicant
    Failed to open config file '/dev/fd/63', error: No such file or directory
    Failed to read or parse configuration '/dev/fd/63'.
    So far I've tried to google the problem, but haven't found a solution that works. I hope you can point me in the right direction.
    Additional info:
    'ip link' provide following output:
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    2: wwp0s29u1u4i6: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether 02:80:37:ec:02:00 brd ff:ff:ff:ff:ff:ff
    3: wlp3s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
    link/ether 00:24:d7:af:98:dc brd ff:ff:ff:ff:ff:ff
    4: enp0s25: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
    link/ether f0:de:f1:53:66:eb brd ff:ff:ff:ff:ff:ff
    And lspci:
    lspci -k | grep Network
    00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
    03:00.0 Network controller: Intel Corporation Centrino Ultimate-N 6300 (rev 35)
    And dmesg:
    dmesg | grep firmware
    [ 2.379351] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2
    [ 2.379368] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2
    [ 2.382114] iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
    [ 8.560626] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
    I guess it have something to do with the firmware, but I'm not sure, as when I googled the problem I stumbled upon a site stating that the wireless card should be supported by the kernel.
    Last edited by cube2 (2015-01-07 14:00:34)

    Yes it is on the same line as this:
    sudo wpa_supplicant -D nl80211,wext -i wlp3s0 -c <(wpa_passphrase "SSID" "key")
    systemtcl list-units
    systemctl list-units
    UNIT LOAD ACTIVE SUB DESCRIPTION
    proc-sys-fs-binfmt_misc.automount loaded active waiting Arbitrary Executable File Formats File System Automount Point
    sys-devices-pci0000:00-0000:00:01.0-0000:01:00.0-backlight-acpi_video1.device loaded active plugged /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/backlight/acpi_video1
    sys-devices-pci0000:00-0000:00:01.0-0000:01:00.0-drm-card0-card0\x2dLVDS\x2d1-nv_backlight.device loaded active plugged /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0/card0-LVDS-1/nv_backlight
    sys-devices-pci0000:00-0000:00:02.0-backlight-acpi_video0.device loaded active plugged /sys/devices/pci0000:00/0000:00:02.0/backlight/acpi_video0
    sys-devices-pci0000:00-0000:00:02.0-drm-card1-card1\x2dLVDS\x2d2-intel_backlight.device loaded active plugged /sys/devices/pci0000:00/0000:00:02.0/drm/card1/card1-LVDS-2/intel_backlight
    sys-devices-pci0000:00-0000:00:16.3-tty-ttyS0.device loaded active plugged 6 Series/C200 Series Chipset Family KT Controller
    sys-devices-pci0000:00-0000:00:19.0-net-enp0s25.device loaded active plugged 82579LM Gigabit Network Connection
    sys-devices-pci0000:00-0000:00:1a.0-usb3-3\x2d1-3\x2d1.4-3\x2d1.4:1.0-bluetooth-hci0-rfkill2.device loaded active plugged /sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/bluetooth/hci0/rfkill2
    sys-devices-pci0000:00-0000:00:1a.0-usb3-3\x2d1-3\x2d1.4-3\x2d1.4:1.0-bluetooth-hci0.device loaded active plugged /sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/bluetooth/hci0
    sys-devices-pci0000:00-0000:00:1b.0-sound-card0.device loaded active plugged 6 Series/C200 Series Chipset Family High Definition Audio Controller
    sys-devices-pci0000:00-0000:00:1c.1-0000:03:00.0-ieee80211-phy0-rfkill3.device loaded active plugged /sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0/ieee80211/phy0/rfkill3
    sys-devices-pci0000:00-0000:00:1c.1-0000:03:00.0-net-wlp3s0.device loaded active plugged Centrino Ultimate-N 6300 (3x3 AGN)
    sys-devices-pci0000:00-0000:00:1d.0-usb4-4\x2d1-4\x2d1.4-4\x2d1.4:1.1-tty-ttyACM0.device loaded active plugged F5521gw
    sys-devices-pci0000:00-0000:00:1d.0-usb4-4\x2d1-4\x2d1.4-4\x2d1.4:1.3-tty-ttyACM1.device loaded active plugged F5521gw
    sys-devices-pci0000:00-0000:00:1d.0-usb4-4\x2d1-4\x2d1.4-4\x2d1.4:1.6-net-wwp0s29u1u4i6.device loaded active plugged F5521gw
    sys-devices-pci0000:00-0000:00:1d.0-usb4-4\x2d1-4\x2d1.4-4\x2d1.4:1.9-tty-ttyACM2.device loaded active plugged F5521gw
    sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda1.device loaded active plugged INTEL_SSDSA2M160G2LE 1
    sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda2.device loaded active plugged INTEL_SSDSA2M160G2LE 2
    sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda.device loaded active plugged INTEL_SSDSA2M160G2LE
    sys-devices-pci0000:00-0000:00:1f.2-ata2-host1-target1:0:0-1:0:0:0-block-sr0.device loaded active plugged MATSHITADVD-RAM_UJ8A2
    sys-devices-platform-serial8250-tty-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
    sys-devices-platform-serial8250-tty-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
    sys-devices-platform-serial8250-tty-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
    sys-devices-platform-thinkpad_acpi-rfkill-rfkill0.device loaded active plugged /sys/devices/platform/thinkpad_acpi/rfkill/rfkill0
    sys-devices-platform-thinkpad_acpi-rfkill-rfkill1.device loaded active plugged /sys/devices/platform/thinkpad_acpi/rfkill/rfkill1
    sys-devices-platform-thinkpad_acpi-sound-card29.device loaded active plugged /sys/devices/platform/thinkpad_acpi/sound/card29
    sys-module-configfs.device loaded active plugged /sys/module/configfs
    sys-subsystem-bluetooth-devices-hci0.device loaded active plugged /sys/subsystem/bluetooth/devices/hci0
    sys-subsystem-net-devices-enp0s25.device loaded active plugged 82579LM Gigabit Network Connection
    sys-subsystem-net-devices-wlp3s0.device loaded active plugged Centrino Ultimate-N 6300 (3x3 AGN)
    sys-subsystem-net-devices-wwp0s29u1u4i6.device loaded active plugged F5521gw
    -.mount loaded active mounted /
    dev-hugepages.mount loaded active mounted Huge Pages File System
    dev-mqueue.mount loaded active mounted POSIX Message Queue File System
    home.mount loaded active mounted /home
    run-user-1000.mount loaded active mounted /run/user/1000
    sys-kernel-config.mount loaded active mounted Configuration File System
    sys-kernel-debug.mount loaded active mounted Debug File System
    tmp.mount loaded active mounted Temporary Directory
    systemd-ask-password-console.path loaded active waiting Dispatch Password Requests to Console Directory Watch
    systemd-ask-password-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch
    session-c1.scope loaded active running Session c1 of user jakob
    dbus.service loaded active running D-Bus System Message Bus
    [email protected] loaded active running dhcpcd on enp0s25
    [email protected] loaded active running Getty on tty1
    kmod-static-nodes.service loaded active exited Create list of required static device nodes for the current kernel
    systemd-backlight@backlight:acpi_video0.service loaded active exited Load/Save Screen Backlight Brightness of backlight:acpi_video0
    systemd-backlight@backlight:acpi_video1.service loaded active exited Load/Save Screen Backlight Brightness of backlight:acpi_video1
    systemd-backlight@backlight:intel_backlight.service loaded active exited Load/Save Screen Backlight Brightness of backlight:intel_backlight
    systemd-backlight@backlight:nv_backlight.service loaded active exited Load/Save Screen Backlight Brightness of backlight:nv_backlight
    systemd-fsck@dev-disk-by\x2duuid-69c2b129\x2dd95a\x2d48f7\x2d84de\x2d058ba5f97b42.service loaded active exited File System Check on /dev/disk/by-uuid/69c2b129-d95a-48f7-84de-058ba5f97b42
    systemd-journal-flush.service loaded active exited Trigger Flushing of Journal to Persistent Storage
    systemd-journald.service loaded active running Journal Service
    systemd-logind.service loaded active running Login Service
    systemd-random-seed.service loaded active exited Load/Save Random Seed
    systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
    [email protected] loaded active exited Load/Save RF Kill Switch Status of rfkill0
    [email protected] loaded active exited Load/Save RF Kill Switch Status of rfkill1
    [email protected] loaded active exited Load/Save RF Kill Switch Status of rfkill2
    [email protected] loaded active exited Load/Save RF Kill Switch Status of rfkill3
    systemd-sysctl.service loaded active exited Apply Kernel Variables
    systemd-tmpfiles-setup-dev.service loaded active exited Create Static Device Nodes in /dev
    systemd-tmpfiles-setup.service loaded active exited Create Volatile Files and Directories
    systemd-udev-trigger.service loaded active exited udev Coldplug all Devices
    systemd-udevd.service loaded active running udev Kernel Device Manager
    pstree
    systemd─┬─chromium─┬─chrome-sandbox───chromium─┬─chrome-sandbox───nacl_helper
    │ │ └─chromium─┬─chromium─┬─2*[{Blink GC Sweepe}]
    │ │ │ ├─2*[{Blink Heap Mark}]
    │ │ │ ├─{Chrome_ChildIOT}
    │ │ │ ├─{Compositor}
    │ │ │ ├─{HTMLParserThrea}
    │ │ │ ├─{OptimizingCompi}
    │ │ │ ├─{WorkerPool/662}
    │ │ │ └─{WorkerPool/663}
    │ │ ├─chromium─┬─2*[{Blink GC Sweepe}]
    │ │ │ ├─2*[{Blink Heap Mark}]
    │ │ │ ├─{Chrome_ChildIOT}
    │ │ │ ├─{Compositor}
    │ │ │ ├─{HTMLParserThrea}
    │ │ │ └─{OptimizingCompi}
    │ │ ├─12*[chromium─┬─2*[{Blink GC Sweepe}]]
    │ │ │ ├─2*[{Blink Heap Mark}]]
    │ │ │ ├─{Chrome_ChildIOT}]
    │ │ │ ├─{CompositorRaste}]
    │ │ │ ├─{Compositor}]
    │ │ │ ├─{HTMLParserThrea}]
    │ │ │ └─{OptimizingCompi}]
    │ │ ├─chromium─┬─2*[{Blink GC Sweepe}]
    │ │ │ ├─2*[{Blink Heap Mark}]
    │ │ │ ├─{Chrome_ChildIOT}
    │ │ │ ├─{CompositorRaste}
    │ │ │ ├─{Compositor}
    │ │ │ ├─{HTMLParserThrea}
    │ │ │ ├─{OptimizingCompi}
    │ │ │ ├─{WorkerPool/155}
    │ │ │ └─{WorkerPool/156}
    │ │ ├─chromium─┬─2*[{Blink GC Sweepe}]
    │ │ │ ├─2*[{Blink Heap Mark}]
    │ │ │ ├─{Chrome_ChildIOT}
    │ │ │ ├─{CompositorRaste}
    │ │ │ ├─{Compositor}
    │ │ │ ├─{HTMLParserThrea}
    │ │ │ ├─{OptimizingCompi}
    │ │ │ ├─{WorkerPool/666}
    │ │ │ └─{WorkerPool/667}
    │ │ └─chromium─┬─{AudioOutputDevi}
    │ │ ├─2*[{Blink GC Sweepe}]
    │ │ ├─2*[{Blink Heap Mark}]
    │ │ ├─{Chrome_ChildIOT}
    │ │ ├─{CompositorRaste}
    │ │ ├─{Compositor}
    │ │ ├─{FFmpegDemuxer}
    │ │ ├─{HTMLParserThrea}
    │ │ ├─{Media}
    │ │ ├─{OptimizingCompi}
    │ │ ├─{WorkerPool/688}
    │ │ └─{WorkerPool/693}
    │ ├─chromium─┬─chromium
    │ │ ├─{Chrome_ChildIOT}
    │ │ └─{Watchdog}
    │ ├─{AudioThread}
    │ ├─{Blink GC Sweepe}
    │ ├─2*[{Blink Heap Mark}]
    │ ├─3*[{BrowserBlocking}]
    │ ├─{BrowserWatchdog}
    │ ├─3*[{CachePoolWorker}]
    │ ├─{Chrome_CacheThr}
    │ ├─{Chrome_DBThread}
    │ ├─{Chrome_FileThre}
    │ ├─{Chrome_FileUser}
    │ ├─{Chrome_HistoryT}
    │ ├─{Chrome_IOThread}
    │ ├─{Chrome_ProcessL}
    │ ├─{Chrome_SafeBrow}
    │ ├─{Chrome_SyncThre}
    │ ├─{CrShutdownDetec}
    │ ├─{IndexedDB}
    │ ├─{LevelDBEnv.IDB}
    │ ├─{LevelDBEnv}
    │ ├─{NSS SSL ThreadW}
    │ ├─{NetworkChangeNo}
    │ ├─{OptimizingCompi}
    │ ├─2*[{Proxy resolver}]
    │ ├─{WorkerPool/1890}
    │ ├─{WorkerPool/1936}
    │ ├─{chromium}
    │ ├─{extension_crash}
    │ ├─{gpu-process_cra}
    │ ├─{handle-watcher-}
    │ ├─{inotify_reader}
    │ ├─{renderer_crash_}
    │ └─{sandbox_ipc_thr}
    ├─2*[dbus-daemon]
    ├─dbus-launch
    ├─dhcpcd
    ├─login───startx───xinit─┬─Xorg.bin─┬─xf86-video-inte
    │ │ └─{Xorg.bin}
    │ └─awesome───{gmain}
    ├─systemd───(sd-pam)
    ├─systemd-journal
    ├─systemd-logind
    ├─systemd-udevd
    ├─xterm───bash───pstree
    └─xterm───bash

  • Dual Booting Mac OS X and Arch, rEFInd fails to open initrd file

    I gave up on trying to solo boot Arch on a MacBook(1,1), and I'm dual booting. I have Arch installed on its own partition, and rEFInd is installed and configured through Mac OS X. I followed the wiki's instructions on moving the initramfs files and creating refind_linux.conf in Arch's folder on the EFI partition, and when I reboot, Arch appears as a boot option! This is good news! However, when I select it, the following happens:
    rEFInd - Booting OS
    Starting vmlinuz-arch.efi
    Using load options 'root=/dev/sda4 ro rootfstype=ext4 systemd.unit=multi-user.target initrd=\EFI\arch\initramfs-arch.img'
    Failed to open initrd file: EFI\arch\initramfs-img
    My question is, do I need to install refind-efi on the Arch partition, even though I've installed rEFInd on Mac OS X?
    Also, do I need to install GRUB in Arch, even though I've [attempted to] used EFISTUB to link rEFInd with Arch?
    Thanks in advance for your help.

    I got 32-bit UEFI to work on my macbook, and I found it to be rather straight forward.  But 32-bit UEFI is not incredibly common, and I wanted to have a 64-bit system so that I could potentially chroot into my other computer's disk if necessary.  So that is why I ended up using bios compatibility on my macbook.
    Edit: Oh yeah, and yes, using MBR only is also another way in which you can use bios compatibility mode.  Basically you just need to have a MBR with more than one protective partition, and I think you need to have one partition marked as bootable in the MBR.  It has been a while since I got all that macbook stuff working though, so the info is a bit stale in my head.
    Last edited by WonderWoofy (2013-06-09 20:31:17)

Maybe you are looking for

  • I accidentally deleted the SD version of a movie, and now neither version is showing up in my purchases?

    Earlier, I downloaded Les Miserables from iTunes. I stored the HD version in the cloud, but my little sister got on my computer and accidentally deleted the SD (that i was getting for my phone). When i went back to the iTunes store, it didn't show up

  • TV@nywhere and ProLink driver/soft?

    Had anybody tried ProLink PlayTV HD driver/software with TV@nywhere card? Both cards are based on the same CX23881 chipset and ProLink card has very good marks according to this ( http://www.3dvelocity.com/reviews/playtv/playtvhd.htm ) review. The dr

  • Can I use SQL/XML feature on EVERY Oracle DB?

    I appreciate the SQL/XML as described here: http://www.oracle.com/technology/oramag/oracle/03-may/o33xml.html But I wonder if I can use these commands on EVERY Oracle DB. Do I have to prepare/setup an existing DB in any way for receiving such SQL/XML

  • 'Notes' field within the Address Book is greyed out

    The 'Notes' field within the Address Book is greyed out. The resolution seems simple enough yet this does not work: "Select the person in the Name column in Address Book, then click the Note field in the card." It's still grey after doing so and data

  • CAN Frame Signal Conversion With XNet

    When dealing with CAN, most new developer struggle with the Frame and Channel (or Signal) conversion.  Developers are trying to get away with using the cheapest CAN hardware, and as a result are opting to not use XNet hardware but instead use things