Log action - Functional Locations (PM)

hi everybody,
I want to view the action log and the changes of a functional location or an equipment in SAP PM, but when i go to Extras - Action Log or Extras - Display Changes, appears the message:
No change document positions found
Message no. CD649
Diagnosis
No change document item was found which satisfies the selection conditions.
Procedure
Pleas check the specified selection conditions.
Maybe i have to activate something.
Please help!

Hi anali.cm
Please note that the following are not recorded as part of change documents for equipments:
Status changes
EQBS data changes
You can view status changes if instead you use the status history or
the application log.
If the changes you make to the equipment are to the status or to a field in the table EQBS then this could be the reason
why you get the 'No change document positions found' CD649 message.
Theirs no customizing that i know of to influence this ...
Thanks -
Enda.

Similar Messages

Help - Class name and descriptions for a function location.

Hi Guys
i have to write a report that displays the class and class descriptions for a function location. the user passes in either the function location(TPLNR) or the class name and the report should display the the class characteristics and resp. values. Is there a FM that i coud use?
please help.
many thanks.
seelan.

sadiepu1 wrote:
When I set up Words with Friends on my Fire it asked for my username and password which from a previous reply to my inquiry above stated that the S 3 doesn't store due to privacy issues. I have tried all my usual combinations of usernames and passwords and my Fire won't let me access the game as it keeps telling me that one or the other is not correct. I have deleted the app from my Fire and re-downloaded it but have the same error comes up. I have accessed the Words with Friends support both on my phone and their website but there is no live chat. I might have to take both to a Verizon store. Also, my Fire won't let me access the game without a correct username and password. To say that I am frustrated would be an understatement as well I have tried everything I can think of with no luck! Thanks for any help you can give!
Did you use facebook to log in?
Verizon will not be able to help you retrieve any of the information you need. You will have to contact Zynga.

Runtime error while opening stucture tab in Functional Location..

Dear All,
Whenever I'm trying to open the structure tab of functional location I'm getting the runtime error and the message is as follws..
Run time error TIME_OUT
Time Limit Exceeded
The program " SAPLIE01" has exceeded the maximum permitted runtime without interruption and has therefore been terminated
Error Analysis
After specific time,the program is terminated to make the work area available to other users who may be waiting
I did not understand the reason for it....
Any can throw light on this...
Thanks in Advance
Johnson

Dear
This problem is occuring due to your transactions has so many datas in output. So that system is providing the error. In each sap log in you can control the maximum idle hours at Option header menu at Main menu.
Else you get the Abaper+Basis for the help. There is no error in functional side for sort out.

Hi Experts , I am currently facing problems while running restricted version copy .. The log says 0 location products copied and that the process has has timed out. the error message is /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014, th

Hi Experts , I am currently facing problems while running restricted version copy in sap apo .. The log says 0 location products copied and that the process has timed out. the error message is " /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014 " , then ending in time limit exceeded. could anyone explain why this happens. please note even if the log says 0 location products copied , in reality they have have been partially copied.
Regards
Jerel

Hi, thank you for your replies, I found out few things about my servlet, and its portability
and i have few questions, although i marked this topic as answered i guess its ok to post
I am using javax.servlet.context.tempdir to store my files in that servletcontext temporary directory. But i dont know how to give hyperlink
of the modified files to the user for them to download the modified files.
What i am using to get the tempdir i will paste
File baseurl = (File)this.getServletContext().getAttribute("javax.servlet.context.tempdir");
System.out.println(baseurl);
baseurl = new File(baseurl.getAbsolutePath()+File.separator+"temp"+File.separator+"files");
baseurl.mkdirs();so i am storing my files in that temp/files folder and the servlet processes them and modifies them, then how to present them as
links to the user for download ?
and as the servlet is multithreaded by nature, if my servlet gets 2 different requests with same file names, i guess one of them will be overwritten
And i want to create unique directory for each request made to the servlet , so file names dont clash.
one another thing is that i want my servlet to be executed by my <form action> only, I dont want the user to simply type url and trigger the servlet
Reply A.S.A.P. please..
Thanks and regards,
Mihir Pandya

FF logs in different location ( Not FF tables)

Hi
Can we have FF logs in different location other than the backend tables? My client wants to have the sensitive FI and HR data logs maybe in a share restricted network drive / folder. Is this worth it?
If anyone has done this, please share your experience and best recommended approach

Hi Robert,
Per my knowledge No.
not possible, SPM in frontend (JAVA stack) is used only for reporting purpose, core functionality is still in the backend (R/3)
you need to
- control access to all this data like frontend Log Report, emails, backend tables..... so on
- my suggestion will be not to use FF for HR purpose
- do custom development
regards,
Surpreet

Functional locations are not transfered to the client

Hi,
I have the problem that no functional locations are transfered to the xMAM client.
I defined a func. loc. selection variant and assigned it to the master data selection of xMAM.
If I create a new notification using a func. loc. it isn't shown on the client (weather the notification or the func. loc.). If I open the notification on the backend, I receive the message that the notification is already transfered to the client. But where is it???
Any idea?
Thank you and regards,
Florian

Hi again,
after some testing, I got it working.
1. deleted all log messages for my mobile device (MEREP_PURGE).
2. executed MEREP_EX_REPLIC with MAM30_030
and then it worked. Now funcional locations are transfered to the client.

Updating Order Functional location data for equipment

We have scenarios where we keep de-installing equipments from one FL to another . We have mapped standing orders in equipment . The FL in standing order of this equipment doesn't change automatically . We have to manually do this (rightclick---update refrence object).
Is there any way we can update order's FL directly when we change equipment's FL in equipment.
NPB

USER EXIT : IEQM0003
FM-EXIT_SAPMIEQ0_001
Transaction code=IE02
Logic
                Before equipment update (save)
1.     Find value in standing order field. (EQUZ(put equipment number in EQUNR field)  get ILOAN value  put it in ILOA field and get DAUFN (standing order) )
a.     If standing order value data found
i.     Find functional location of the equipment (EQUZ (Table-input field EQUNR-fetch ILOAN) table (input field ILOAN to table ILOA output TPLNR) (A)
ii.     Find the functional location of the order AFHI(Table)u2014(EQUNR is inut) u2013output ILOAN numberInput ILOAN in ILOA get TPLNR (B)
1.     If A=B matching with that of FL of equipment being updated
a.     u2013No action
b.     Save equipment changes
2.     If not matching A <> B
a.     Save equipment
b.     Update orderu2019s FL with that of equipmentu2019s FL through BDC (input order number DAUFN)
b.     If standing order value not found
i.     Do not take any action
ii.     Save equipment changes
I can't update tables directly . I don't think any BAPI's exist to update objects in order . I can not execute a BDC from user exit . Now How to automate this ?
NPB
NPB

Function module for function location

Hi All,
I want to implement locking concept in a report where I need to lock the function location (IL02), can any one please help me in getting the ENQUEUE AND DEQUEUE Function module .
Thanks
Shaw

Hi,
Refer below code
ORM sub_update_database USING    gt_hdrlog TYPE ty_t_monitor
                                   gt_itmlog TYPE ty_t_error.
*--Local data declaration
DATA : ls_errormsg TYPE zapt_ar_error,   "Error Table
         ls_monitor TYPE zapt_ar_monitor. "Monitor table
*--Local Constant declaration
CONSTANTS : lc_x TYPE c VALUE 'X'.
*--Sort table by idoc number and legacy vendor
SORT gt_hdrlog BY doc_num altkn.
*--Delete Duplicate values from Header log internal table
DELETE ADJACENT DUPLICATES FROM gt_hdrlog COMPARING doc_num altkn.
*--Check if monitor table is initial
IF NOT gt_hdrlog[] IS INITIAL.
    LOOP AT gt_hdrlog INTO ls_monitor.
*--Lock the DB table ZAPT_AR_MONITOR before updation
      CALL FUNCTION 'ENQUEUE_EZAPT_AR_MONITOR'
        EXPORTING
          mode_zapt_ar_monitor = lc_x                 "Check
          mandt                = sy-mandt             "Cient
          doc_num              = ls_monitor-doc_num   "IDOC number
          x_doc_num            = lc_x                 "Check
        EXCEPTIONS
          foreign_lock         = 1
          system_failure       = 2
          OTHERS               = 3.
      IF sy-subrc NE 0.
        WAIT UP TO 1 SECONDS.
      ELSE.
*--If DB table is locked then insert data into custom table
        INSERT into zapt_ar_monitor values ls_monitor.
        IF sy-subrc NE 0.
*--Update custom table
          UPDATE zapt_ar_monitor FROM ls_monitor.
        ENDIF.
      ENDIF.
*--Unlock the table after updation
      CALL FUNCTION 'DEQUEUE_EZAPT_AR_MONITOR'
        EXPORTING
          mode_zapt_ar_monitor = lc_x                 "Check
          mandt                = sy-mandt             "Client
          doc_num              = ls_monitor-doc_num   "IDOC Number
          x_doc_num            = lc_x.                "Check
*--Clear the work areas
      CLEAR : ls_monitor.
    ENDLOOP.
ENDIF.
*--Check if the internal table for error messages is initial
IF NOT gt_itmlog[] IS INITIAL.
    LOOP AT gt_itmlog INTO ls_errormsg.
*--Lock the DB table ZAPT_AR_ERROR before updation
      CALL FUNCTION 'ENQUEUE_EZAPT_AR_ERROR'
        EXPORTING
          mode_zapt_ar_error = lc_x                  "Check
          mandt              = sy-mandt              "Client
          idoc               = ls_errormsg-idoc      "IDOC Number
          line_nbr           = ls_errormsg-line_nbr "Line Number
          err_nbr            = ls_errormsg-err_nbr   "error Number
          x_idoc             = lc_x                  "Check
          x_line_nbr         = lc_x                  "Check
          x_err_nbr          = lc_x                  "Check
        EXCEPTIONS
          foreign_lock       = 1
          system_failure     = 2
          OTHERS             = 3.
      IF sy-subrc NE 0.
        WAIT UP TO 1 SECONDS.
      ELSE.
*--If DB table is locked then modify the table
        INSERT into zapt_ar_error values ls_errormsg.
        IF sy-subrc NE 0.
*--Update custom table
          UPDATE zapt_ar_error FROM ls_errormsg.
        ENDIF.
      ENDIF.
*--Unlock the table after modification
      CALL FUNCTION 'DEQUEUE_EZAPT_AR_ERROR'
        EXPORTING
          mode_zapt_ar_error = lc_x                 "Check
          mandt              = sy-mandt             "Client
          idoc               = ls_errormsg-idoc     "IDOC Number
          line_nbr           = ls_errormsg-line_nbr "Line Number
          err_nbr            = ls_errormsg-err_nbr "Error Number
          x_idoc             = lc_x                 "Check
          x_line_nbr         = lc_x                 "Check
          x_err_nbr          = lc_x.                "Check
*--Clear the work areas
      CLEAR : ls_errormsg.
    ENDLOOP.
ENDIF.
Regards,
Prashant

PM: Transaction IE02 functional location change creates new EQUZ?

Everytime we execute transaction IE02 and change the functional location, it apparently creates a new EQUZ record (new valid from date). There is a scenario where we do NOT want this to happen. In other words, we have an equipment, say EQ123. We want this equipment to have one history record per a cycle that might include several changes in the functional location. When the cycle is complete, then we can create a new history (EQUZ) record. That cycle might be warehouse departure to warehouse return.
Is this possible. If so, can it be configured or done so that this only applies to a certain set of equipment (say equipment belonging to plant PXYZ)?
Thanks in advance,
Glen.

Glen,
I hope I understood your requirement clearly. Usage history is mainly maintained in the ILOA and EQUZ tables together. So when u look up a usage list, data is retrieved from these two tables together. Now, there is a provision in customization to specify which field values if changed should appear as a history update. For instance, as u said if the functional location changes it should not be logged in the history. Whereas if the equipment steps out of the warehouse or returns there should be an update to its history. The following is the path in IMG to achieve this:
SAP Customizing Implementation Guide--> Plant Maintenance and Customer Service --> Master Data in Plant Maintenance and Customer Service --> Technical Objects --> Equipment --> Equipment Usage Period --> Define History-Related Fields
thanks
Bala

Do you know the link between the sales order item and functional location ?

How know the functional location if I know de sales order number and item ?
Wich table or bapi ?
Tks.

Hi,
I think there's all details in my question.
You answer is right only if I need to know the functional location at AUFNR level.
Is not my case, I need this information at sales order level.
Regards,
Roberto.

How to log the exception using Log action in Oracle Service Bus

Hi,
Whenever an exception is raised how to log the exception using Log action in oracle service bus.After logging where I have to find the logged message.

It would be in the log file for the managed server which ran the request. If you are logging the message at a lower level than your app server, however, you won't see it. You should be logging the exception at Error level.

Help required: class assignment and values for functional location

Hi All,
My requirement is to get classification data for a functional location as in IL03.
Can any one let me know where in the standard program are they getting the assigned classes
and class values. So that I can use the same logic.
Thanks.

FM BAPI_OBJCL_GETDETAIL
OBJECTKEY                       ?0100000000000011643
OBJECTTABLE                     IFLOT
CLASSNUM                        ZPMI_BLDG
CLASSTYPE                       003
KEYDATE                         29.07.2009
UNVALUATED_CHARS
LANGUAGE                        EN
Cheers!

Required to get class Charateristics and values for an functional location

Hi ,
   As per the requirement ,i have to read the class characteristics and the corresponding values for an function location.I have functional location number ,and the various class names associated with fn.location. Any pointers would be helpful
Regards
Arun T

FM BAPI_OBJCL_GETDETAIL
OBJECTKEY                       ?0100000000000011643
OBJECTTABLE                     IFLOT
CLASSNUM                        ZPMI_BLDG
CLASSTYPE                       003
KEYDATE                         29.07.2009
UNVALUATED_CHARS
LANGUAGE                        EN
Cheers!

FM for characterstic value of a function location (asset)

Hi All,
Can any one please tell me the FM module to be used for finding the characterstic value for a given characterisctic name of a function location in IL03 (classification).
I have tried using BAPI_CLASS_GET_CHARACTERISTICS, but it is not yielding the desired results.
Thanks in advance
Deepti

Hi,
I don't know why you are not getting the proper reult.
BAPI_OBJCL_GETDETAIL iis uesd to get both character and numeric values back form the classes.
Check this:
LV_OBJECT = I_TPLNR.
CALL FUNCTION 'BAPI_OBJCL_GETDETAIL'
EXPORTING
OBJECTKEY = LV_OBJECT
OBJECTTABLE = 'IFLOT'
CLASSNUM = 'Z_DEPOT'
CLASSTYPE = '003'
TABLES
ALLOCVALUESNUM = WT_ALLOCVALUESNUM
ALLOCVALUESCHAR = WT_ALLOCVALUESCHAR
ALLOCVALUESCURR = WT_ALLOCVALUESCURR
RETURN = IT_RETURN.
Furthermore i have a list of BAPI. [Try this link|http://www.saptechies.com/sap-bapi-list/].
May it helps you.
Regards.
DS.

How to use BAPI_HELPVALUES_GET with functional location

I try to create an RFC connection searchhelp for my ECC system to the functional location table.
I thought of using the bapi_helpvalues_get but I get stuck in determing the right input data
I have found the right objectype in SWOI
BUS0010
now I found out thanks to see where the function was used and how it was filled in with which values
OBJTYPE                         BUS0010
OBJNAME                         FUNCTIONALLOCATION
METHOD                          GETLIST
PARAMETER                       FUNCLOC_LIST
FIELD                           FUNCTLOCATION
but still I get an error
ES&003Parameter FUNCLOC_LIST voor objectmethode BUS0010.GETLIST not available
what do I miss here ??
and If abnybody nows how I can build a searchhelp with just a searchhelp exit without a view to search for values it will also solve my problem in creating a searchhelp with data from another system which I have to retrieve by RFC
kind regards
arthur

BAPI_PTIMEOVERVIEW_GET
Just pass in the a From date and To date, and then in tables, pass in a employee no, in EMPLOYEES field.thats all, execute. Any prompts you get to enter a value for anything just click save without entering any values. You will get data returned in Result table of TIMEOVERVIEW.
You can find the Documentation of this, when you go into display mode of this Bapi, you will find function module documentation on top right hand side of the screen. in any case i am pasting it below.
Functionality
    This method defines a time data overview for employees.
    The time data determined can be used as a value guide for recording in
    another system (such as in a time sheet or an external system).
Notes
    An "asynchronous access" to R/3 Time Management data determined by the
    method PTimeOverview.Replicate specifies the employees for whom a time
    data overview is to be created.
    A "sysnchronous access" to R/3 Time Management data determined by the
    time period entered and the external application specifies the employees
    for whom a time data overview is to be created.
    The employees selected are returned in the EMPLOYEES parameter. A list
    of the time types for these employees also to be included in the
    overview is returned in the TIMETYPES parameter.
    The time data overviews are returned in the TIMEOVERVIEW parameter.
    The selected time types and the applicable number of hours are returned
    in the TIMETYPEVALUES parameter.
    The overviews are transferred to the other systems by the method
    PTimeOverview.SaveReplica.
Parameters
    FROMDATE
    TODATE
    EXTAPPLICATION
    EMPLOYEES
    TIMETYPES
    TIMEOVERVIEW
    TIMETYPEVALUES
    RETURN
Exceptions

Log action - Functional Locations (PM)

Similar Messages

Maybe you are looking for