Log and Capture - FCP7 & JVC BR-DV3000

I have a MacBook Pro with Final Cut Studio (FCP7) and I am attempting to log and capture from a JVC BR-DV3000, but it will not recognize. What settings should I be using?

If the deck isn't being recognized, check first in Apple System Profiler to see if the hardware is detected. (Upper left corner>About this Mac>More Info will get you there, then look at the FireWire connections.
The deck should show up as "Unknown Device" with Manufacturer: JVC in the detail. If it does not, then you have a cable or FireWire port issue. If it does show up, then the problem is in your capture setup.
There is nothing unusual or special about the deck, I set mine up using the default DV capture presets. If you're still not hooking up after the above drill, come back with your preset info.
Good luck!

Similar Messages

CHALLENGE: CAPTURE files from JVC H7 Camcorder to FCE via log and capture.

Thanks to this forum I can now capture from my JVC HD7 in real time. BUT, the utility File>Log and Transfer seems lots better. See www.apple.com/finalcutexpress/ and look at the video AVCHD capture. My JVC AVCHD does not seem to be able to log and capture. Maybe some genius can figure it out. Please help.
Thanking in advance.
Don

Attn: Tom Wolsky.
I was disappointed to hear I could not capture by Log and Capture with the JVCE Everio HD7.
May I ask, Do you know any comparable camcorder with a 60 meg HD that would.
Or what would be the best method to capture from the JVC?
I have your book on order and looking forward to it.
Thanks for ant help,
Don

Unable to Log and Capture AND make FCP a boot disk

I am unable to go into Log and Capture mode in FCP 4. I can capture from firewire using I movie just fine so I know the sytem works. The minute I open Log and Capture from within FCP (with the JVC Mini-DV camera hooked up thru Firewire), it crashes. Help. I upgraded from FCP 3 to FCP 4 a couple years ago and it hasn't worked right since. Would re-installing the FCP 4 upgrade work? Also, my system works very sluggish. Please explain to me how I would make the veersion of FCP 4 my boot disk. I realize that I can't have the FCP 4 application and the media on the same drive but is there a way to partition one of my drives and make FCP one of the startup disks? Hope this isn't too confusing. Thanks.

First off, FCP 4 was darn unstable. FCP 4.5 is a free upgrade and is STILL the most stable version out there. FCP 5 is getting there.
Secondly, try:
Shane's Stock Tip Mantra: If the program was working fine, and now isn't, or just isn't working the way it should, the first things to do are:
1) Trash your FCP preferences. Download the appropriate version of FCP Rescue at http://fcprescue.andersholck.com/ and run it.
2) Open the Disk Utility and Repair Permissions.
As for partitioning the hard drive, that isn't necessary. Hasn't been since FCP 3.
Shane

Preview disabled in log and capture

I am using Final Cut Pro 7 on the latest iMac i7.
I have a DVCam deck connected to the iMac via a firwire 800 cable.
There is a DV tape with DV footage in the deck.
I am able to control the deck from log and capture but the display is the colour bar window with PREVIEW DISABLED on it.
I have checked and double checked that my settings are correct, that video and audio are selected in capture settings etc etc.
Everything is selected correctly on the deck.
All mu suer preferences and presets are also correct.
I have trashed FCP preferences as well.
The content on the tape is viewable fine on the camera and on an external monitor.
So, in summary:
I am unable to log and capture DV material from the tape even though the deck is controllable from log and capture window.

It's a Sony DVCam DSR 11 deck which will play mini DV or DvCam tapes recorded in PAL or NTSC.
I haven't changed anything on the deck at all since last usung it a few weeks ago with the G5 and Tiger OS. I simply unplugged the firewire and plugged it straight into the new iMac.
The old G5 was running FCP6, but because the G5 and Tiger (it's was a pre Intel machine) won't run FCP7 I decided to use this as the reason to upgrade and chage to the iMac i7 Lion OS.
The material in question is PAL DV on mini tapes.
The camera is a Panasonic DVX100A and only capapble of recording in SD DV.
All the selection switches are correct on the deck. I'm puzzled why I can get the image and capture from the camera, with the same cable, and yet not from the deck.
Thanks Michael

Logging and capturing from a hard drive camera

I recently bought a jvc hard drive camera. It saves the video to 2 files a .mod file and a .moi file and when I try to use these in FCP it does not recognize these file types. Any help would be appreciated.

Hi:
Has your camera a firewire port? To use Log and Capture you must use such port. What model is it?
Alberto

Log and Capture suddenly stopped working

I encountered a strange issue today, I have a Cannon HF 200 and it created .MTS files when I record my video, I usually insert the SD card and than select log and capture from FCP7 and convert all my videos..but now when I insert my card and select log and capture, the card does not load and I cannot see any of the clips..which is very odd
I even trashed the preferences but to no avail
Any help guys??

I have also un-intalled and then re-installed FCP7< </div>
Why do people keep doing that? Macintosh software just doesn't work that way.
You probably turned the camera off before the software had completed the write to the card or you may have set the camera to record in a weird format or used the wrong drive setting. Try pluging the card into a PC? Have you tried the Canon users' forums? When you search for them, you will want to spell the brand correctly.
bogiesan

Log and Capture Screen

I just switched from FCP to Final Cut Express HD. I cannot get the "log and capture" screen to show as in FCP version. I get a small screen with just capture. No device controls, etc.
Is there a preference setting somewhere I have not found or doesnt FCE HD have that function?
thanks
Jon
firewired to JVC JD 110U

There is no device control or capture window for HDV material. You set the correct settings, activate the capture the function, and the material gets sucked into your computer and converted to Apple Intermediate Codec.

Cannot get log and capture to work

I have a JVC HD-GR1 camera and I am trying to log and capture my video using the 4 pin-9 pin firewire cable. It states that it is not recognizing the JVC camera. So I tried it in iMovie, it recognized the JVC camera but it was just a blue screen with a time code. What really confused me is that the computer will controll the camera (in iMovie) rewinding, fastforwarding and playing the video on the JVC Camera, but on the iMac it is still a blue screen on the log and capture video. Any ideas?

[Link: Working with HDV in Final Cut Pro|http://documentation.apple.com/en/finalcutpro/professionalformatsandworkflo ws/#chapter=2%26section=0].

Black horizontal bars in log and capture

Hi,
big problem here, when I go to capture my video in the log and capture sceen it displays 5 think horizontal black bars accross my image..
tried restarting/launching
I never had this problem before, using Panasonic DVmaster tapes on a JVC BR3000 deck
HELP!!
thanks

Not sure... never ran across this before.
What do you see from the deck to a broadcast monitor?
How does it look when you've captured it?
Maybe switch out FW cables?????? Oh - is it going IN via FW or into a card?
Any chance you can hook up a cheap fw camera or any other deck to trouble shoot some of these issues?
Might also want to delete your preferences... google for FCPRescue5 or FCPRescue6 depending on which v you are using.
CaptM

Muting Log and Capture

Hey web, I haven't found anything confirming the ability to mute premiere during the capture of a DV tape. I've lived with this reality forever, but I find it hard to believe I'm not over looking something.. Does anyone have a suggestion on how I might be able to mute premiere as an application all together, or more specifically just the playback of the capture..
iMac 10.10.1
Premiere CC 2014
Log and Capture via firewire from DV Camera

This is very confusing. I don't understand the last sentence.
You list an MBP and a G5 as computer. FCP7 does not run on a G5, so let's just focus on the MBP.
Please give the complete configuration, what drives, how they're formatted, and exactly how everything is connected. What settings are on your media and what settings are you using in FCP?

FCP5 Log and Capture...

hi!
i have a JVC GZ-MG505AA hard disk camcorder and i cant get it to use the log and capture functions. I tried to use the easy-setup but FCP cant control my camera. Its 3CCD HDD but i dont know what settings to use. can anybody help me?
thanks
iMac G5 Mac OS X (10.4.8)

I think you are correct when you say "FCP cant control my camera". That model does not have a Firewire port, only USB and S-video and Composite ports. Final Cut requires a FW port to control log and capture functions on a camera.
What does the manual say about the transfer of the files on the camera's HD to a computer via USB? JVC certainly works with PCs, but I'm unsure about the mac. The camera probably came with software to allow this transfer.
I think your best bet is to transfer the files to a PC, transcode the files with Quicktime Pro and then transfer to a Mac for use in FCP.

Log and capture problems for HDV using FCP 5.0.1

I cant seem to get a picture in my log and capture browser when using HDV. The screen says my camera is connected, I see timecode correctly rolling in sync with my cameras timecode, I can use the controls, but no picture on the screen?
When I hit capture now, the capture screen pops up and gives a message "waiting for data from device".
we shot at 720p at 25fps, there is no capture preset for this in my version of FCP. Could this be the problem? Please help!!

Thanks for responding.
It's a mac osx 10.4.11 and a 2 ghz intel core duo. I'm using easy set up in final cut pro, but there is no option for hd fire wire basic (which apple support told me to look for). The only hd options are 1080i50, i60 and 720 p30. The other hd options are for the apple intermediate codec. When I use the easy set up for hd 1080i60, then go to log and capture, it doesn't give me the preview window to set in's out, batch capture etc. It only lets me capture straight from the camera and I have to manually stop it and start it which is a major pain. Plus the clips need to be rendered once I put them in a timeline. I've shot and edited on mini dv with final cut for nearly 7 years, but now that i've tried to upgrade and shoot hd mini dv, all of these problems have arrived in capturing. I'm starting to think my version of final cut pro (5.0.1) just doesn't work with hd, unless it's very time consuming. Any ideas?

Log and Capture in FCP 6.0.5 flash red frames

So I have been having a very odd and troubling issue during my log and capture stage in post production, whenever I try to import a tape into FCP I get this intermittent red colored frame that flashes for what I could only guess is a frame and it happens probably every ten frames or so; I've tried every combination of hardware troubleshooting from a different deck and camera, tapes from all different times and cameras and formats, different firewire cables and even different firewire ports.
Has anyone has any experience with this or even anything like this, and if so how can I make it stop, I have even tried that final cut maintenance program and basically everything short of a clean reinstall... do I really have to go that far!?

Some users have success with the newer drivers others not so fortunate.
Read through this thread:
http://discussions.apple.com/thread.jspa?threadID=2676952&tstart=0
Al

No Audio during Log and Capture

Hello, I have FCP 6.0 and am unable to hear my audio during log and capture. I have this problem on all 5 G5 Macs that I have, and have tried different editing docks and cables. I have used FCP for more than 5 years and have never had this problem. iMovie has audio during capture, so I am convinced that there is a pre-set in FCP that I don't have checked properly, but I've been over them many times and still have no answer. I searched past forums and didn't really find anything helpful to me.
My pre-sets are set to DV NTSC 48kHz and the playback pre-sets are set to default. I can hear audio of my clips after I log and capture, but I still need to hear audio during importing. I'm more confused than anything. If anybody has had this problem before or any suggestions for me, I'm all ears.
Thanks.
John

... as Bogie says.
However... this is a non-feature that dates back to slower CPU days... yet, still with all the different formats and such I (ME!!) I believe it's still good practice to leave it off.
Devoting as much CPU work to the capture process lessens the chance for something to go wrong. You can easily monitor the audio directly out of the deck as needed.
Sure -- octo cores need 30 apps open just to get your money's worth and I'm sure you won't have any issues using an 8th of one to send audio thru itself while the other 7 and 7/8ths are used for capture... but who wants to risk it?
Not me... I'm to old to change my ways.
Blast you FCP v1.2.5 on a beige G3 with 7gig and 15gig hard drive -- you taught me well.
CaptM

Log and capture freezes - please help

hi,
I'm using FCP 5 (studio). on G5 dual 2GH 1GB.
it has become a nightmare to log and capture. after few minutes from working with log and capture the applications freezes. I have to force quit FCP.
I trashed the preferences once, I re-installed, but the same thing is happening. I'm working on 2 projects, deadline is approaching.
I appreciate any helpful responses.
sz

Are you trying to record three video streams simultaneously? Or by a video amplifier, you mean a video switcher?
If you are using Capture Now, make sure you have set a capture limit. This is why:
When you use log and capture, the disk system is being asked by FCP to essentially "keep capturing until we tell you to stop ... and no, we don't know HOW much that will be either." It is stressful on the system to be continually wandering around looking for space to stuff those ones and zeros with out any sense of how many they have to accommodate. One solution available to the system is to allocate the ENTIRE empty space on the disk as the potential capture file. This essentially locks the machine as there is no headroom for basic disk operations.
However if you set a limit on capture now, say 60 minutes, the disk system can allocate the space and may seem to be less confused by the process. It still does not know EXACTLY how much you want, but it knows you will not want MORE THAN the limit and therefor can reduce some of the uncertainty.
Better yet is to record to a timecode addressable tape. This allows you to log the tape, then use batch capture. When you do this, the system knows EXACTLY how much space to allocate for each file and is very efficient.
Good luck.
x

Log and Capture - FCP7 & JVC BR-DV3000

Similar Messages

Maybe you are looking for