Log and capture, Someone has logged and captured whole tape

I need to capture clips from the captured material! Is there a way of doing this?

Sarcasm is almost impossible to impart in online forums . . .
. . is it . .
. . really . .
. . .do you think . . . .

Similar Messages

  • Batch capturing entire tape...recomended???

    Is it a good idea to attempt to batch capture a tape in its entirety? I am having problems doing this...I do a lot of events that last often over 2 hours. Instead of capturing footage in clips, I just capture the entire tape. When I'm done with the project, I simply make the clips offline.
    I'm in the process of reviving a project now, and one tape in it's entirety(55 min approx), captured OK, but I am having problems with another tape. I am getting a broken timecode error, when I don't see how this is possible...because I let the tape freely run. Also, under the logging info, the media ends before the tape ends, which means that is space left on the end of the tape without any timecode. Yet when I batch capture, it still goes to the end of the tape.....isn't a batch capture suppose to go by the clips media in and media out points?
    All help is greatly appreciated.

    I do this often. There are two shools of thought on this method -
    Capturing entire tapes allows one to scroll through non-linearly and make subclips. The advantage to subclips is that they are serachable and you can add comments. The downside to this method is that the files are large, and you may be capturing much more metarila than you need. I often do this when working on docs with very high shooting ratios. The most recent one had 190 tapes for a 1-hour program, which led us to use offline RT for our cutting format and then recapture for online.
    Logging and capturing single clips fives you the advantage of starting out capturing only what you know you might use, you can input the logging info at the start, and will have several small clips that may be easier to manage. Since at some point you'll have to familiarize youself with the matreial anyway, you might as well do it at the logging stage.
    Several factors can contribute to perceived TC breaks - reusing tapes, camera stops, shooting format (HDV, for instance, will show a TC break each time the camera stops). If you are capturing whole tapes, you might do well to let FCP create new clips on TC breaks and just let it roll. Make sure the TC format matches between your tape and settings (DF vs. NDF)
    Regarding rolling off the end of the tape during capture, you might be very close to the end with the clip you are capturing. You might try lowering the post-roll value in the device control preset in your A/V settings.
    Hope this helps -
    Max Average

  • How can i see when someone has accessed my call/text log. (This is possible on google) I have been informed that someone has accessed my activity log and is giving my information to a third party. I believe it is a service tech, but I am not interested in

    How can i see when someone has accessed my call/text log. (This is possible on google/gmail) I have been informed that someone has accessed my activity log and is giving my information to a third party. I believe it is a service tech, but I am not interested in persuing that further. I just need to see when my account has been accessed if possible.

    Hi lynniewigs,
    This is a common concern among Android and I-phone user, and one of the drawbacks to using a smart phone.  We lose so much privacy. Our phones become cameras into our homes for us to be spied on.
    I don't know what type of phone you have, if it is even a smart phone, but here is an example of an application that you can use to determine which applications are accessing your information and sending it out. 
    Permission Scanner - Android Apps on Google Play
    Google just recently revamp their permissions geared to hide invasive applications that spy and send out your information without your knowledge.  Report says be aware of what your Android app does - CNET
    Please continue to be mindful of the apps you download and the permissions you give. 

  • Whenever I log into Facebook and someone has sent me a video I get a green screen and I can't see the video.  Please help.

    Whenever I log into Facebook and someone has sent me a video I get a green screen and I can't see the video.  Please help.

    You're welcome. And thank you for marking question as answered. To prevent it from happening again, go to Settings > General > Accessibility, turn off Zoom.
    Stedman

  • Someone has captured my email address and sending emails saying they are from me.

    Someone has captured my email address and sending messages out to people in my address book making it look like they are  from me. It's for an advertisement on a webpage. How do I get it to stop?
    This has not happened to me in over 3 years when I switched to apple products.
    Anyone that can help me clean this up. Most of the recipients that the link above is being sent to are simply deleting because they know if I was the one asking them to check out the link I would tell them first what it was about before they open it. There is NO message in the email JUST the website.  This is frustrating for me...brings me back 3 years to anti-virus protection with Windows.
    Thank you,
    Bernie
    <Link Edited By Host>

    You may have been infected by a Botnet:
    Simply put, a bot – which is short for robot – is an automated computer program that allows outside sources to control computers remotely without the users' knowledge. A botnet is a network of hundreds or thousands of computers infected with botnet malware that communicates covertly with a command-and-control (CnC) server run by a type of cybercriminal called a botmaster. Unbeknownst to the individual users, their computers are linked in a rogue network which the botmaster can utilize for a variety of nefarious purposes.
    Detailed information here:
    http://mac-internet-security-software-review.toptenreviews.com/how-do-i-know-if- my-computer-is-a-botnet-zombie-.html

  • Current Time code field and "Capture Now has reached the end of tape......"

    Hi I just got my new iMac and I have lots of space. When I open up the Final Cut Pro and press the capture now it gives me the notice that it had reached the end of tape, but I haven't reached the end. I have vhs in the VCR machine and it is connected through the digital device. Not only that but my current timecode field is always running and I can't stop it. Also I used the uncontrollable device and when the tape has reached the end I tried to escape but it seizes up and I lost my capture. what shall I do?

    Yeah, I was just thinking about that. I'm doing this on an iMac.
    What's going on with Capture Now? I know staying digital would be best. But I'm kinda doing this project to give myself some hands-on time with FCP to get familiar with it. I'd like to capture this stuff through the Log And Capture GUI if I can. Sooner or later, I'll need to do it with something else (possibly an old VHS tape) where I won't have the option of staying digital.
    Anybody?

  • Why does my android message me that someone has logged into my account? how do I make it stop.

    Don't know what I pressed but everytime I log in to Firefox (which is about 100 times a day) My phone gives me a message
    that someone has logged into my account. Make it stop.

    Hi arsthegreat:
    I don't understand what happened. Clarification please:
    # What do you mean by "log in to Firefox". Do you mean login to your Firefox account? or do you mean log in to some other site. If it's not a Firefox account than it's probably not a Firefox issue.
    # What do you mean by "My phone gives me a message that someone has logged into my account.". Do you mean text message? or an email? or someting else
    # Any further info on what version of Firefox, what version of Android and what you did, what happened, what you expected would be super helpful.
    Cheers!
    ....Roland

  • Digitizing Whole Tape vs. Logging Specific Clips and Batch Digitizing Them

    For the last couple of years I have always gone through each of my (HDV) tapes, logged the clips I thought I might use, and batch-digitized them.
    Is there any reason I can't digitize whole tapes all at once and then create subclips? I do have the room on my media drive.
    Thanks.

    Is there any reason I can't digitize whole tapes all at once and then create subclips?
    No reason at all.
    How I capture depends on the nature of the project. For most script based projects, I usually only capture individual clips that I think I may use. For event type projects (seminars, meetings, etc), I log and then capture the entire recording as one clip.
    -DH

  • TS1424 I believe the credit card online has been compromised and someone has purchased from iTunes without my permission. What can I do?

    What can I do if my credit card has been compromised and someone has used it to buy from the itunes Store?

    Wpgjets wrote:
    ... What does iTunes do to track the ones who steal CC numbers and use them to make iTunes purchases?
    What they do is up to them, but loss prevention may include suspending that Apple ID for purchases until such time the fraud is rectified. They may pursue the thief for chargebacks and fines from the issuing bank and take whatever other legal action they deem appropriate. In any event none of that involves you, presuming it's not your job to investigate criminal activity. As long as your payment method continues to be accepted by Apple, you don't have to do anything else.
    Changing your Apple ID password once in a while is a good idea though, and if Apple wants to compel you do so you will find out when you attempt to log in here or make a purchase. Be wary of "phishing" and never click on any links in an email that may appear to be from Apple, as authentic as it may seem. This is a popular way of stealing Apple IDs and all that it entails.

  • 8mm and Canopus or Digital 8 for capturing 8mm tapes?

    I have a Canopus 300 that I've been using for capturing VHS tapes. I also have an 8mm camcorder. Will that camcorder + Canopus do as good a job as a Digital 8 camcorder or Digital 8 playback deck?
    Thanks!
    MikeR

    Probably only a side-by-side comparison using the same test footage would provide a definitive answer as to which path produced the better result.
    The data stream on a Digital8 tape is the same DV stream that is on a miniDV tape. The data is identical, it's just the physical tape that is different. You can only get 1 hour of DV onto a 2-hour Hi-8 tape, because the Digital8 camcorder runs the tape at approximately twice the speed.
    My Sony DCR-TRV460 is smart enough to recognize the signal and switch between modes. I even have a few tapes which have regular analog 8mm video on part of the tape and Digital8 on a later part of the same tape. When it reaches one of these changes, the camera automatically stops and switches mode, then starts rolling again.
    Not all DV is exactly identical, I have found out. There is a small discrepancy between the way Panasonic cameras record DV and the way Sony cameras record DV. I found this out when a colleague sent me a miniDV tape recorded on a Panasonic camera. I took it to a video shop to have it copied over to a Digital8 tape, which should have been a direct digital copy. But at the shop they told me Panasonic records DV in a slightly different way. The result is that there were some glitches and artifacts on the copy, and some audio problems as well. If you stick with all one manufacturer you should probably not run into that problem.
    The downside is that I have found Sony camcorders to suddenly fail to operate at the worst possible moments, and for no apparent reason. This has happened to me several times, in fact my TRV460 died a couple of weeks ago. It is always wise to have an expert repairman who is knowlegeable about Sony available at all times.
    I think that the Sony deck (GV-D200) might be exactly what you need for your project, but at $500 for a new one (or maybe $250-$300 for a used one on eBay) that would be a significant cost.
    Message was edited by: Bob Weaver

  • Capture a tape and separate clips

    I am new to Final Cut Express 4 but I have had extensive experience with various Premier Elements, including PE7 as well as with WideStudio 10 & 11. Notwithstanding all that I cannot find out how to capture the DV tape from my camcorder (Sony DCR-HC40E) so that each 'clip' is separated. In the other products above, once you have clicked to separate clips, (by time-codes) they were all captured and recorded as separate clips. In FCE I tried capturing with Batch Capture but that did not work. Can someone please help me as to what i need to do?
    Thanks in advance
    Belatamas

    Hi Meg The Dog
    thanks for your suggestion. I did read Page 192 but was not very clear to me. Do I take it that first I have to capture the entire tape in one 'hit' and then segregate the tape into clips? With other programs I used, the 'capture' itself segregated and recorded each clip as it was recording/capturing the tape. The 'segregation' was based on each clip's time code. Is that not the case with FCE 4? Does that mean that I cannot 'capture' all my clips on a tape in one hit as i used to? Or have I misunderstood you response?
    Thanks again
    Belatamas

  • Is there any way to tell if someone has cleared and reused a lost Ipod touch? Or will it continue to show up as offline in Find Iphone app?

    I have the app Find Iphone, and my kids' ipods are linked to the app because we share an itunes account. My son cannot find his ipod, in which, he took it on a mini-vacation with friends. He never took it out of their vehicle, but it may have fallen out at some point, just not sure. When I check my app, it simply reads offline. I want to know if there will be a way to know if someone has reset it (even if I cannot locate them)? I don't want to keep wasting my time looking to see if it somehow was connected to the internet when it has already been cleared. Help pleased?

    Will it continue to say that the device is in lost mode if it has been restored?  My Find Iphone is saying that when the device is connected to the internet that it will be locked and that a message (that I typed in) will appear. It also says that I will be notified and that a sound will occur when it is connected. Now my iphone has been updated to the ios7, but I don't think his ipod was updated.

  • If someone has wiped my ipad and changed passwords on icloud how do i get my data back

    if someone has wiped my ipad and changed passwords on icloud how do i get my data back? please could someone help me out thanks

    How did they wipe it?  By using Find My iPad and performing a wipe?  If so, that means they have your icloud ID and password, not a good thing.
    You could try connecting it to iTunes and performing a restore from iCloud.  But if they changed password, then you are out of the loop.  How did they get your password in order to change it?

  • Since latest update to 6.1.2 no possibility to switch on Wifi on Iphone 4S, tried all suggestions even hairdryer and all hocus pocus but no result. Someone has updated solution on today 11 march 2013 ?

    It started with difficulties to catch wifi connections around and the wifi connection in my place.....  then the switch on to Wifi just blocked -
    once i've tried the solution with hairdryer and it worked for a few days, according to some suggestions the Iphone would be sensitive on
    temperatures....  Meanwhile i have tried many resets, all kind of suggested combinations but so far nothing works.  Its only with 3G i can
    survive....  Do someone has updated solutions please ?   Why Apple doesnt open any communication about this problem ? I suppose a new
    upgrade must be in preparation to bring solution to this very annoying bug.

    Have almost identicle situation going, totally screws my day for I have appointments to keep and important calls to make...this *****

  • Someone has hacked my things, how do I turn wifi off, and when will it be safe to go back on?

    Someone has hacked my things, how do I turn wifi off, and when will it be safe to go back on? Also, do I need to reset everything? I have already changed passwords, covered my webcam, etc. Will they still have access to my computer?

    Could you explain what you mean by 'Someone has hacked my things'?
    What Mac do you have, with what version of OS X?
    What security do you have on your wi-fi?

Maybe you are looking for