Log and Transfer bug - "RAD Ingest"????

I can not get the Log and Transfer window to appear. After several attempts it may appear but then says "RAD Ingest" in the top of window. It will not display the contents of a mounted P2 card, nor will the window close or anything in it function. I am forced to quit the application. Also Compressor will not initiate from FCP, nor will it work on it's own.
I have already dumped not only the prefs, but the entire studio applications, anything on my system related to FCPS and then re-installed. NO LUCK Still acts the same. Maybe there is a file I missed wen trashing prefs.
Any help greatly appreciated.

http://forums.creativecow.net/thread/8/942086#942086
Are you trying to import directly from the card? Try copying the contents of the card to a hard drive first...which is something you really should be doing. Get the footage off the card, onto a drive...and those are your masters. The import into FCP using Log and Transfer onto your media drives.
Shane

Similar Messages

FCP Log and Transfer Bug(s)

FCP 7 doesn't seem to like XDCAM EX very well.
After installing the Sony plugin.
Any attempt to FF through footage produces the opposite - Reverse.
I am also currently unable to clear the Transfer browser of mounted clips/volumes.
Repairing permissions did nothing.
Are we looking at trashing FCP prefs ...?
Never had to do that with 7.0.3.

https://discussions.apple.com/docs/DOC-2491
Are you using the keyboard or the controls on the log and transfer window? If you're using the keyboard, do they perform properly with captured clips?

RAD Ingest FCP Log and Transfer freeze

Greetings all, I am having problems using the Log and Transfer window in Final Cut Pro 6.0.5 on the IMAC system (Imac Intel Core 2 Duo 4 G 667 MHz Ram) I'm using- basically when I open it, at first it doesn't even open, then when I try opening it again, it shows up but has RAD Ingest written at the top, and the pane is frozen. It doesn't crash FCP but I can't close the window again. I don't have FXInstaller installed, so that's not the problem. All the P2 Media is on drives- its on a RAID mirror drive (I also read this could be a problem so I moved some of the media to another Firewire drive, and took the raid drive offline but it didn't make a difference).
I've reinstalled FCP twice now, the version I had was 6.0 and then I used software upgrade to upgrade it to 6.0.5. The OS I'm installing on is 10.5.6. On a side note, on my laptop, I've got OS 10.4.9 installed and FCP 6.0.5 and Log and Transfer works fine. I'm thinking it might be an OSX version problem because this has happened on another Mac laptop that has 10.5.6 on it. Any ideas on what it could be? I'm kind of at wits end....pulling my hair out kind of deal!
Thanks for any input!!
Alexandra
Message was edited by: xandradeg

Hi David,
I have 4GB Ram installed, and the footage is P2 Cam footage that was copied on to the hard drives during the shoot. I transferred the P2 footage with Duel Adapter, not from the camera directly. Some of it is also AVCHD footage from mini HD cam. I've been using my laptop (Macbook Pro, OS 10.4.11, 2G Ram with FCP 6.0.5 installed) to bring in footage, and Log and Transfer works fine with the same footage but doesn't work with this iMac. I was hoping to stop using my laptop so I can do everything on just the iMac.

Log and Transfer Video Ingestion problem

I have a Sony camcorder that uses AVCHD on a HD. Problem is that I have clips that don't want to transfer over using Log & Transfer - only the audio is transfering. I can still see the video on the tool, but the preference for bringing over the video is grayed out - only the audio check box is checked, not the video - as a result no video is coming over - just audio clips.
I saw other posts on this topic, but no resolution. I'm using FCP Studio (latest version - I think 7.02. This is quite frustrating. Anyone have an idea? Is it a camera problem or a FCP problem? As I can see the video on the camera and in the Log and Transfer window, it feels like a software glitch.
Help!
[email protected]

Thanks Tom...so simple...sort of like "did you take the lens cap off?"

Working with AVCHD: Log and Transfer FAQs

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Working with AVCHD: Log and Transfer FAQs
Log and Transfer was introduced to the product chain in Final Cut Express 4, and is the program's process for ingesting files in the AVCHD format utilizing MPEG-4 AVC/H.264 video coding and either Dolby AC-3 or uncompressed linear PCM audio coding. The most frequently observed problems relating to the Log and Transfer process are generally quite easily addressed.
What should I know before attempting to ingest my footage?
The following facts regarding the Log and Transfer process were adapted from the [Apple Knowledge Base article|http://support.apple.com/kb/TA24840?viewlocale=en_US] on transferring AVCHD in Final Cut Pro 6.0.1 but still hold true for the current version of FCE:
AVCHD support is available only on Intel-based Macintosh computers.
AVCHD camcorders typically connect to computers via USB 2.0, not FireWire.
DVD-based AVCHD camcorders are not supported in Mac OS X 10.4 or earlier.
Standard definition video recorded with AVCHD camcorders cannot be accessed in the Log and Transfer window. SD and HD clips should not be mixed on the same HDD.
Preview of AVCHD video in the Log and Transfer window is limited to 1x forward playback. Scrubbing the playhead does not update the video in the Preview area until you stop scrubbing.
When you choose to transfer AVCHD audio in the Logging area, audio is automatically mixed down to stereo.
AVCHD footage is not ingested natively but is transcoded to the Apple Intermediate Codec.
Apple Intermediate Codec files are significantly larger than the original AVCHD files. FCE does not estimate the size of a transcoded AVCHD file before ingesting, so it is possible to exceed the available space on your capture disk during transfer. Before ingesting, keep in mind that the disk space required is about ten times greater than the size of the native AVCHD file.
Which specific formats can be ingested by Log and Transfer?
Only AVCHD footage can be ingested through the Log and Transfer process. Other formats and variants such as AVCHD Lite are not supported. All video should be recorded in a frame size of either 1440x1080 or 1920x1080 and a frame rate of 25 or 29.97 frames per second. Audio recorded on AVCHD camcorders is generally at a rate of 48kHz. If your camera shoots in a format that does not comply with one of these setups then it is most likely not supported by the application and is not guaranteed to work correctly.
Which Easy Setup preset should I select before ingesting my footage?
It is extremely important to select the preset that matches your media before you attempt to ingest via Log and Transfer. There is only one Easy Setup preset that matches the frame size and rate of your footage. If you intend to ingest AVCHD clips through Log and Transfer you will first need to select one of the following presets:
AVCHD-Apple Intermediate Codec 1440x1080i50
AVCHD-Apple Intermediate Codec 1440x1080i60
AVCHD-Apple Intermediate Codec 1920x1080i50
AVCHD-Apple Intermediate Codec 1920x1080i60
If these four options do not appear under your Easy Setup list then you probably need to run Software Update and update to FCE 4.0.1. DO NOT cycle through the available presets until you find one that works - there is only one preset that matches your media and it should be evident which one to choose by the way it is named. Select the AVCHD preset that mentions your frame size and frame rate (i50 presets support both 50i and 25p frame rates; similarly, i60 presets support both 60i and 29.97p frame rates). If you do cycle through many options in the hope of selecting the correct one through guess-and-check you will probably have corrupted your preference file and need to [trash your preferences|http://support.apple.com/kb/TS2611] before continuing.
Why don't my clips appear when I open the Log and Transfer window?
Make sure your camcorder records AVCHD in a format supported by FCE4. It should be connected to one of your computer's USB ports (never connect it to an external hard drive or other external device such as your keyboard or a USB hub), powered on, and set to video playback mode.
If the camcorder +does not+ mount on your Desktop your USB port or cable may be malfunctioning. Try plugging it in to another port or using a different USB cable to see if it makes a difference.
If the camcorder does mount on your Desktop but the clips do not appear in the Log and Transfer window you will need to point the program to the directory that contains your media.
First, click the Add Folder button in the upper left of the Log and Transfer window. The button looks like this:
Then, you will need to navigate to the root directory in which your media is stored. Most camcorders call this folder "PRIVATE" or "AVCHD" and it should be located at the very top level of the camcorder when mounted. If your camcorder records to a valid AVCHD directory structure then your clips should load after the Add Folder process is completed.
I would like to keep a working backup of my original clips so that I can delete them off the camcorder's internal memory. How should I do this?
There are two main ways to keep a backup of your clips. The first is to ingest every clip on your camcorder through the Log and Transfer process, and store the Apple Intermediate Codec files the application creates in an easily accessible place such as an external FireWire drive. The advantage of this method is that you have the ability to open back up old editing projects, reconnect the media as necessary, and keep going as if you'd never left. However, due to the large amount of space AIC takes up (usually somewhere in the vicinity of 41-50GB an hour when transcoded from AVCHD), this is not always feasible.
Another often preferable approach is to copy over the root directory in which your clips are stored (usually named "PRIVATE" or "AVCHD") from the camcorder to your computer or an external drive. As long as you maintain the original file structure, you will be able to ingest your clips again at a later date using the "Add Folder" process detailed above to navigate to their new location.
My clips appear, but when I attempt to ingest a red exclamation point appears and the window displays the message "Error: No Data"
This is one of the most common problems that users experience when trying to ingest their media through the Log and Transfer process. Luckily, it also has one of the easiest solutions.
In the Log and Transfer window, click on the gear icon in the top right and select "Preferences" in the contextual menu that appears.
Make sure the video is set to transcode to the Apple Intermediate Codec and the audio is set to Plain Stereo.
After doing so, hit OK and try to ingest again.
I am experiencing a problem that is not covered in this tip or the solutions here do not work.
The best thing to do at this point would be to trash your preferences and start a new topic in the [FCE Forum|http://discussions.apple.com/forum.jspa?forumID=936&start=0] with a detailed description of your problem. Check out the user tip on [Basic Troubleshooting in Final Cut Express|http://discussions.apple.com/thread.jspa?threadID=2662419] for more information.
This is the 1st version of this tip. It was submitted on December 03, 2010 by skalicki`.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Working with AVCHD: Log and Transfer FAQs
Log and Transfer was introduced to the product chain in Final Cut Express 4, and is the program's process for ingesting files in the AVCHD format utilizing MPEG-4 AVC/H.264 video coding and either Dolby AC-3 or uncompressed linear PCM audio coding. The most frequently observed problems relating to the Log and Transfer process are generally quite easily addressed.
What should I know before attempting to ingest my footage?
The following facts regarding the Log and Transfer process were adapted from the [Apple Knowledge Base article|http://support.apple.com/kb/TA24840?viewlocale=en_US] on transferring AVCHD in Final Cut Pro 6.0.1 but still hold true for the current version of FCE:
AVCHD support is available only on Intel-based Macintosh computers.
AVCHD camcorders typically connect to computers via USB 2.0, not FireWire.
DVD-based AVCHD camcorders are not supported in Mac OS X 10.4 or earlier.
Standard definition video recorded with AVCHD camcorders cannot be accessed in the Log and Transfer window. SD and HD clips should not be mixed on the same HDD.
Preview of AVCHD video in the Log and Transfer window is limited to 1x forward playback. Scrubbing the playhead does not update the video in the Preview area until you stop scrubbing.
When you choose to transfer AVCHD audio in the Logging area, audio is automatically mixed down to stereo.
AVCHD footage is not ingested natively but is transcoded to the Apple Intermediate Codec.
Apple Intermediate Codec files are significantly larger than the original AVCHD files. FCE does not estimate the size of a transcoded AVCHD file before ingesting, so it is possible to exceed the available space on your capture disk during transfer. Before ingesting, keep in mind that the disk space required is about ten times greater than the size of the native AVCHD file.
Which specific formats can be ingested by Log and Transfer?
Only AVCHD footage can be ingested through the Log and Transfer process. Other formats and variants such as AVCHD Lite are not supported. All video should be recorded in a frame size of either 1440x1080 or 1920x1080 and a frame rate of 25 or 29.97 frames per second. Audio recorded on AVCHD camcorders is generally at a rate of 48kHz. If your camera shoots in a format that does not comply with one of these setups then it is most likely not supported by the application and is not guaranteed to work correctly.
Which Easy Setup preset should I select before ingesting my footage?
It is extremely important to select the preset that matches your media before you attempt to ingest via Log and Transfer. There is only one Easy Setup preset that matches the frame size and rate of your footage. If you intend to ingest AVCHD clips through Log and Transfer you will first need to select one of the following presets:
AVCHD-Apple Intermediate Codec 1440x1080i50
AVCHD-Apple Intermediate Codec 1440x1080i60
AVCHD-Apple Intermediate Codec 1920x1080i50
AVCHD-Apple Intermediate Codec 1920x1080i60
If these four options do not appear under your Easy Setup list then you probably need to run Software Update and update to FCE 4.0.1. DO NOT cycle through the available presets until you find one that works - there is only one preset that matches your media and it should be evident which one to choose by the way it is named. Select the AVCHD preset that mentions your frame size and frame rate (i50 presets support both 50i and 25p frame rates; similarly, i60 presets support both 60i and 29.97p frame rates). If you do cycle through many options in the hope of selecting the correct one through guess-and-check you will probably have corrupted your preference file and need to [trash your preferences|http://support.apple.com/kb/TS2611] before continuing.
Why don't my clips appear when I open the Log and Transfer window?
Make sure your camcorder records AVCHD in a format supported by FCE4. It should be connected to one of your computer's USB ports (never connect it to an external hard drive or other external device such as your keyboard or a USB hub), powered on, and set to video playback mode.
If the camcorder +does not+ mount on your Desktop your USB port or cable may be malfunctioning. Try plugging it in to another port or using a different USB cable to see if it makes a difference.
If the camcorder does mount on your Desktop but the clips do not appear in the Log and Transfer window you will need to point the program to the directory that contains your media.
First, click the Add Folder button in the upper left of the Log and Transfer window. The button looks like this:
Then, you will need to navigate to the root directory in which your media is stored. Most camcorders call this folder "PRIVATE" or "AVCHD" and it should be located at the very top level of the camcorder when mounted. If your camcorder records to a valid AVCHD directory structure then your clips should load after the Add Folder process is completed.
I would like to keep a working backup of my original clips so that I can delete them off the camcorder's internal memory. How should I do this?
There are two main ways to keep a backup of your clips. The first is to ingest every clip on your camcorder through the Log and Transfer process, and store the Apple Intermediate Codec files the application creates in an easily accessible place such as an external FireWire drive. The advantage of this method is that you have the ability to open back up old editing projects, reconnect the media as necessary, and keep going as if you'd never left. However, due to the large amount of space AIC takes up (usually somewhere in the vicinity of 41-50GB an hour when transcoded from AVCHD), this is not always feasible.
Another often preferable approach is to copy over the root directory in which your clips are stored (usually named "PRIVATE" or "AVCHD") from the camcorder to your computer or an external drive. As long as you maintain the original file structure, you will be able to ingest your clips again at a later date using the "Add Folder" process detailed above to navigate to their new location.
My clips appear, but when I attempt to ingest a red exclamation point appears and the window displays the message "Error: No Data"
This is one of the most common problems that users experience when trying to ingest their media through the Log and Transfer process. Luckily, it also has one of the easiest solutions.
In the Log and Transfer window, click on the gear icon in the top right and select "Preferences" in the contextual menu that appears.
Make sure the video is set to transcode to the Apple Intermediate Codec and the audio is set to Plain Stereo.
After doing so, hit OK and try to ingest again.
I am experiencing a problem that is not covered in this tip or the solutions here do not work.
The best thing to do at this point would be to trash your preferences and start a new topic in the [FCE Forum|http://discussions.apple.com/forum.jspa?forumID=936&start=0] with a detailed description of your problem. Check out the user tip on [Basic Troubleshooting in Final Cut Express|http://discussions.apple.com/thread.jspa?threadID=2662419] for more information.
This is the 1st version of this tip. It was submitted on December 03, 2010 by skalicki`.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer." I have tried to update my settings, but this doesn't seem to work. Any help would be much appreciated

I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer." I have tried to update my settings, but this doesn't seem to work. Any help would be much appreciated

Hard Drive: The Hard Drive is on my camera (Sony Handycam)
Just needed some info on what is going on with your particular system.
Knowing the exact camera model will also assist us.
If this camera is standard AVCHD you should be able to connect with USB to Mac with FCE open and use Log and Transfer without all the fiddling around converting etc.
What FCE does during ingest is convert files to AIC. (Apple Intermediate Codec)
FCE cannot read the individual files in the BDMV folder, that's why all the converting is required when you use that method.
BTW: regards formatting drives/cards/memory on cameras; it is wise to use the actual device to format rather than a computer. This is a prime cause of read/write goof ups with solid state media. This applies to still or video cameras.
Keeping the COMPLETE card/memory structure in tact is vital for successful transfers.
Try here for some trouble shooting tips:
https://discussions.apple.com/message/12682263#12682263
Al

Log and transfer footage from Panasonic GH1 into FCE

I have already read the few threads discussing importing AVCHD video from the Panasonic GH1 camera into FCE. I was expecting that the 1080x24 (wrapped in 60i) would import OK but the 720x60p would not. However, so far, I have had both formats import using the log and transfer just fine. These have been only short clips roughly a minute or less in length but no sign of FCE crashing when importing the 60p footage.
So, is this considered normal or has something in the most recent OSX updates fixed this FCE capability?

The program is usually able to ingest 24p and 60p footage fine, but upon exporting it will be conformed to the frame rate of your sequence. Since FCE doesn't support custom sequences all exported movies are either in 29.97fps or 25fps. Problems also sometimes arise where the program interprets your footage as 29.97fps instead of what it actually is, causing the audio to drift a bit as well.
Better to stick to what the program supports: 50i/25p and 60i/30p. If you need the functionality of 24p or 60p you should upgrade to Final Cut Pro.

Log and Transfer has Media start from 00:00:00

I am trying to transcode my FS100 footage using FCP7. When i ingest my footage, all the footages have Media starting from 00:00:00. When I checked in my friends computer, he has a correct timecode. The only difference is he is using snow leopard and i am using lion.
Thanks in advance.

So you're using Log and Transfer? I seem to remember there alot of problems posted here with footage on the FS100 which were caused by an upgrade of some sort. Here's one of the threads.
https://discussions.apple.com/message/16780859#16780859
Do some more searching here and I think you might find a soluition.

Not all files work in log and transfer

Hoping maybe someone has found a fix to this issue...
When editing an HDV project not all my .m2t files (all in the same folder) want to transfer using Log and Transfer. Most of the files will transfer correctly but sometimes it skips a file and puts a red exclamation mark in the status. Not sure why most files work and a few don't when they are all from the same folder and from the same shoot. The files will open fine in other 3rd party apps so the files are ok.
Thanks in advance for any help!
Mike

Mike Cole1 wrote:
Not sure why most files work and a few don't when they are all from the same folder and from the same shoot. The files will open fine in other 3rd party apps so the files are ok.
FCP may be a bit more discriminating on the file structure or header integrity, dunno, never shot HDV myself but we've seen similar posts for years. Try copying the files to your drive first and then ingesting.
Side note, ust because other apps can open the files doesn't mean they are intact or useable. You don't mention what these apps are but if you can export form them, do that and then ingest the new file which might have all of its glitches reparied to suit FCP.
bogiesan

Premiere NEEDS Log and Transfer

Ok, so hear me out.
I absolutely understand that Premiere edits almost every single format known to man, however I have one absolutely massive issue with this:
Unless you use 2 extra pieces of adobe software (from my knowledge you need to use Prelude and Media Composer), there is no way that you can trim footage before you can import it. Why is this not an option. Some clips are just huge and would be stupid to import the entire clip. There needs to be an easy way to trim footage before you can import it to save disk space, much like Final Cut Pro 7 and Log and Transfer.
Please correct me if I am wrong. If there is a way to trim before you import footage in Premiere only, please let me know. No questions here, just needed to get this off my chest.
-Rory

Hi Toebex,
Toebex wrote:
Please correct me if I am wrong. If there is a way to trim before you import footage in Premiere only, please let me know. No questions here, just needed to get this off my chest.
-Rory
You can achieve a partial ingest in Adobe Prelude. See this article: http://www.premiumbeat.com/blog/ingest-options-adobe-prelude/
Thanks,
Kevin

Efficient way get FCE4 Log and Transfer to read .mts files stored on drive?

Hi All
I've searched the FCE discussion forum and not found an answer verified by more than one user to this question: What is an efficient way to get FCE4 (via the Log and Transfer window) to see .mts files from an AVCHD camera stored on a drive (NOT via the camera -- directly from the drive)?
I am trying to plan the most space-efficient system possible for storing un-transcoded .mts files from a Panasonic AG-HMC151 on a harddrive so that I can easily ingest them into FCE4. I am shooting a long project and I want to be able to look at .mts files so that I can decide which ones to transcode to AIC for the edit.
Since FCE4 cannot see .mts files unless they have their metadata wrapper the question is really 'how do I most efficiently transfer .mts files from the camera to a storage harddrive with their metadata wrappers so that FCE4 can see them via the log and transfer window?'
Nick Holmes, in a reply in this thread
http://discussions.apple.com/thread.jspa?messageID=10423384&#10423384
gives 2 options: Use the Disk Utility to make a disk image of the whole SD card, or copy the whole contents of the card to a folder. He says he prefers the first option because it makes sure everything on the card is copied.
a) Have other FCE users done this successfully and been able to read the .mts files via Log and Transfer?
In a response to this thread:
http://discussions.apple.com/thread.jspa?messageID=10257620&#10257620
wallybarthman gives a method for getting Log and Transfer to see .mts files that have been stored on a harddrive without their metadata wrappers by using Toast 9 or 10.
b) Have any other FCE4 users used this method? Does it work well?
c) Why is FCE4 unable to see .mts files without their metadata wrappers in the Log and Transfer window? Is it just a matter of writing a few lines of code?
d) Is there an archiving / library app. on the market that would allow one to file / name / tag many .mts clips and view them prior to transcoding into space-hungry AIC files in FCE?
Any/all help would be most gratefully received!

I have saved the complete file structure on DVD as a backup, but have not needed to open them yet. But I will add this. As I understand the options with Toast you are infact converting the video to AIC or something like it. I haven't looked into it myself, but I can't imagine the extra files are that large, but maybe there are significant, I don't know. The transcoded files are huge in comparison to the AVCHD file.
A new player on the scene for AVCHD is Clipwrap 2.0. As I understand this product. It rewraps the AVCHD into a wrapper the Quicktime can open and play. This is with the MTS files only, the rest of the file structure is not needed. The rewrap is much faster that the transcode to AIC. So you have the added benefit of being able to play the files as well as not storing the extra files. The 2.0 version (which is for AVCHD) was just recently released. I haven't tried it and don't personally know of anyone who has. You might want to try this, there is a trial version as I recall.

Best way to import MTS (AVCHD)/missing clips using Log and Transfer

My footage (Sony HDR 500) of an average project consists of approximately 10 hours film and 1600 clips. When I use the option Log and Transfer to import in FCE not all clips are imported in FCE. All other clips are consecutively numbered and cannot be compared with the numbering of the clips on the camera anymore. As a result it is, with those large amounts of clips, almost impossible to find out which clips are missing.
Importing takes a very long time (is that normal?) so I would like to run this proces at night, but due to this missing clips problem I am afraid to do this so it is not a good option for me. Does anyone recognize this problem?
To avoid all this I now convert all clips with Voltaic to .mov before importing. At least I know for sure that I have all clips imported, but it is so cumbersome and it takes a lot of time too. This proces I do in steps because I am afraid to start everything at once. After converting the project almost takes 120 GB.
It takes days before everything is imported and that frustrates me. If the same material is imported in Edius for example it only takes an hour (tested) so it appears to be an FCE/Apple problem. Is there any way to accelerate?
I am working with an iMac from 2010, 2,8GHz quadcore i7, 16GB intern geheugen met snow leopard.
I hope someone can help me out.
Thanks, Jacqueline

While I have not seen the exact problem you describe, 1600 clips is a lot of clips to import at once - so is 10 hours of video.
If you are using FCE to Log & Transfer directly from the camera, your clips are automatically being transcoded to QuickTime/Apple Intermediate Codec(AIC) during importing, which explains the long time it takes to ingest the clips.
Also, QT/AIC files are much, much larger than the AVCHD clips in your camera. If you are shooting 1920x1080 video, 10 hours of AVCHD translates into roughly 450GB of QT/AIC clips. It is possible that you may be a) running out of disk space, or b) exceeding the scratch disk minimum allowable free space set in FCE > System Settings. If so, that could explain why not all your clips are being imported - FCE is probably stopping the Log & Transfer process when it hits the disk space limit.
Regarding alternatives, I'm not so sure about Voltaic. The Voltaic documentation says it only supports H.264 in QT/.mov files, and that would not be usable in FCE. Check some of those clips to see what codec they are. I suspect they are H.264. (Also, you referred to the converted clips taking 120GB space, which just happens to match the AVCHD storage capacity of your camera ... and AVCHD is a form of H.264 video, so they take up about the same disk space.)
In order to edit your clips in FCE, they need to be QT/AIC. Two alternatives come to mind - Clipwrap and MPEG Streamclip. Both can convert AVCHD video to QT/AIC, and both support batch conversion. If it were me, I'd consider Clipwrap first, for this volume of material, since Clipwrap was specifically designed for AVCHD.
The reason importing is so much faster in Edius is that it can import & directly edit AVCHD clips; Edius basically just copies the clips from the camera to your hard drive. FCE has to convert the clips to QT/AIC first, before you can edit the video, and that takes considerable time.

"media start" on log and transfer is now time of day

I'm using a Canon T2i, and previously, while ingesting clips in the log and transfer window, the "media start" was 0:00:00 for all clips. For the past few days, the media start has instead been the time of day (i.e. 18:34:23) which has become quite annoying. How can I get it to reset to 0:00:00?

Hmm... my T2i is at work... but I wonder if it is a camera setting. Usually (on most video cameras) that's where it is. Wonder if you set it by accident (ahem).
Flip thru the movie menus on the T2i to make sure.
CaptM

How to speed up Log and Transfer in FCP 7.0 of Canon 7D footage on my Macbook

Hey there,
I'm using Final Cut Pro 7.0 and the Log and Transfer of my Canon 7D footage is taking forever.
I have both the Canon XF MPEG2 plugin and the Canon EOS Movie plugin.
Any suggestions?
Cheers!

Are you transferring the files directly from the camera, via a USB cable?
Try taking the card out of the camera and using a good quality card reader, or better yet, try copying the camera storage card to a hard disk (preserving the complete card file structure) and then Log and Transfer from that copy on hard disk.
See if that speeds up the L&T ingest.
MtD

Weird Log and Transfer warning

So I'm teaching a class and the students have their AVCHD camcorders connected and we're ingesting using Log and Transfer. All the clips appear in the window and it's working fine. But every few minutes, all the students get a warning dialogue that says:
".fn contains unsupported material or has an invalid directory structure. Please choose a folder whose directory structure matches supported media."
All they have to do is dismiss the warning and keep working. But then it will come up again in a few minutes.
Anyone know what this means?
Thanks very much.

I'd try and copy the Hard disk contents to the computer before log and transfer. There may be some material on the camera hard disk that's not part of what log and transfer is looking for and when log and transfer sees those elements, it gives you that warning. Do you want to open the camera's hard disk on the mac describe the folder structure. It's possible you need to navigate to the appropriate folder and mount that in the log and transfer window, not the entire camera hard drive.

Log and Transfer bug - "RAD Ingest"????

Similar Messages

Maybe you are looking for