Log and Transfer doesn't "see" my camera

I just got back from an afternoon of recording the kids -- plug the camera into the computer, launch FCE and go to the log and transfer screen -- -and nothing. Panic now sets in. There seems to be nothing to be done, to get FCE to recognize the folder structure on my Canon Vixia FFS10 camera. What's up with that. (Why it needs a folder structure is strange to say the least)
It's not like the .MTS files aren't there. there's about 6GB of content that I'm anxious to get started transcoding. Is there something i'm missing on the log and transfer screen? The No Name disk is on my desktop, and using finder I can see the MTS files -- why FCE can't is strange.
Suggestions?

I don't think I changed format on the SD card, although I can't be 100% sure, since I didn't format the card before today's shoot.
What I ended up doing, is copying the MTS files from the card to a scratch drive, and convert them to AIC using Voltaic, which I'm guessing is all the log and transfer does anyway.
Having done that I formatted the card, using the camera, then shot of a clip, and sure enough now the camera (which is no longer called no name, but rather called canon) is recognized by FCE and it looks like all is now working.
Is there a way to sending feed back to apple for future versions. It still seems to me that Log and Transfer is a bit too particular, when it comes to AVCHD.

Similar Messages

Log and transfer will not see contents in p2 folders

This just started happening. Before log and transfer was working great now it won't see
any of the video shot to p2 cards in most of my folders. Every now and then it recognizes and imports actual images into Log and transfer but not from the folders I need. This is really becoming a hassle I now have to go to my slower computer with a older version of final cut 5.04 and transfer using the import function (which works fine) is there any reason why log and transfer won't recognize theses files?

I just started having this problem on my laptop. And it has nothing to do with Noise Industries, because I've never had it installed on my laptop.
Same thing, though, with AVCHD files. I shoot them, copy the entire card to an external drive, then L&T from there. Just stopped working. Even cards I've transferred in the past won't load into the L&T window anymore.
Reinstalled software last night and was working again. Came downstairs this morning to start in on another project, and no L&T anymore.
No new software installed or upgraded, it just stopped working.

Log and transfer doesn't recognize my SD-cards any more!

On my FCP7 log and transfer won't recognize SD-cards any more.
Log and transfer just flashes the "adding" -part and then nothing, or in some times it crashes the whole Final Cut.
I have been using the same cards, my old Canon 60D and Canon E-1 movie plugin for years. Only new thing is that I now have a Canon 6D with old 60D.
The weirdest thing is that, I have some old SD card images (made with disk Utility for back up) and when opened there are no problems.
Any suggestions?
Thanks.

Have you tried resetting your fcp preferences? Digital Rebellion's Preference Manager is the best tool for doing this in my opinion.
https://discussions.apple.com/docs/DOC-2491
Have you loaded or installed any software recently or done any software updates?

FCP Log and transfer doesn't read all my SD cards

Hello geniuses around the world!
I'm L-and-T-ing from SDHC cards with HD footage from a Panasonic HMC151 into the latest FCP.
Everything is working fine for 6 of my 8 SD cards... 2 of them won't transfer.
NONE of the cards will drag and drop straight to the L&T window, I've not been able to drop any files straight into it, but it will register from 6 of the SD cards fine. The other two wont go in whatever I try.
I've made new disk images to a hard drive and tried loading it from there, works fine for 6 of 8 cards.
I can view the info on the two "bad" cards fine in finder, and movist, but no way of getting it into FCP.
I'm trying to meet a deadline. Please help!
Thanks in advance.

I've no direct experience, just have questions with gut hunches...
Tried a disk image, right?
Same camera shot all the cards?
How large are the errant cards? Are they new? have you successfully used them in the past?
Do you have recovery software such as Data rescue II?
Seems to me it's likely not software, but a bad recording on a card somehow. Ugh. I'm just guessing however. I hope I'm wrong.
I'll sos this around.
Welcome to the forum, by the way.
Is there software you need to install to mount those cards in FCP?
Jerry
Message was edited by: Jerry Hofmann

AVCHD log and transfer - Only from a camera?

I am thinking about upgrading my camera to a AVCHD camera. I saw on a post that you can only log and transfer AVCHD footage from the camera and not just the card attached via card reader. Can someone shed some light on this. I want to be able to shoot, transfer/backup onto an external HDD and then Log and Transfer from the drive. I want to keep the camera busy out in the field and not tied up on my desk.
Thanks community!
Brian

You may fing this helpful:
http://library.creativecow.net/articles/ross_shane/tapeless-workflow_fcp-7/video -tutorial
When using card readers make sure it supports the larger capacity cards or at least the size card you are using.
Al

Exclamation mark(orange) log and transfer

Equipment:
13" Mac book pro 2.4GHz (baseline 2010)
Lumix DMC-G2
Sandisk 32gb(mem card)
Problem:
I am trying to log and transfer my videos off the camera and onto my computer, the videos show up and I can preview them. The problem is once I try to Q them an exclamation mark appears in the progress section(orange colour). I am recording in 720p AVCHD
What do I do?
Thanks,Storm

#36 - One or More files failed to import.
Shane's Stock Answer #36 - "One or more clips failed to import..."
Very often in the field with this camera the camera operator will delete clips from the camera card that they just don't like. That is the beauty of this camera. But, the still for that video file (located in the CLIP folder in the CONTENTS folder)...the still that you see when you are in the Log and Transfer Import window...is not deleted. So you will see the image, and the name, but the video file would have been deleted.
What you can do it compare the file names in the VIDEO folder and CLIP folder and see if anything is missing. If something is, then you know what the problem is. You can then just import the rest a few at time, skipping that one.
ALSO...in the Log and Transfer Import window...in the Browser, there is a little sprocket drop down menu. Click on that and choose PREFERENCES. Uncheck REMOVE PULLDOWN and then try importing again.
ALSO...make sure your file names aren't too long. Try shortening them and see if that works.
ALSO make sure that the folders that contain the CONTENTS folder doesn't have any odd characters like /!@#$%^&*()?.

Efficient way get FCE4 Log and Transfer to read .mts files stored on drive?

Hi All
I've searched the FCE discussion forum and not found an answer verified by more than one user to this question: What is an efficient way to get FCE4 (via the Log and Transfer window) to see .mts files from an AVCHD camera stored on a drive (NOT via the camera -- directly from the drive)?
I am trying to plan the most space-efficient system possible for storing un-transcoded .mts files from a Panasonic AG-HMC151 on a harddrive so that I can easily ingest them into FCE4. I am shooting a long project and I want to be able to look at .mts files so that I can decide which ones to transcode to AIC for the edit.
Since FCE4 cannot see .mts files unless they have their metadata wrapper the question is really 'how do I most efficiently transfer .mts files from the camera to a storage harddrive with their metadata wrappers so that FCE4 can see them via the log and transfer window?'
Nick Holmes, in a reply in this thread
http://discussions.apple.com/thread.jspa?messageID=10423384&#10423384
gives 2 options: Use the Disk Utility to make a disk image of the whole SD card, or copy the whole contents of the card to a folder. He says he prefers the first option because it makes sure everything on the card is copied.
a) Have other FCE users done this successfully and been able to read the .mts files via Log and Transfer?
In a response to this thread:
http://discussions.apple.com/thread.jspa?messageID=10257620&#10257620
wallybarthman gives a method for getting Log and Transfer to see .mts files that have been stored on a harddrive without their metadata wrappers by using Toast 9 or 10.
b) Have any other FCE4 users used this method? Does it work well?
c) Why is FCE4 unable to see .mts files without their metadata wrappers in the Log and Transfer window? Is it just a matter of writing a few lines of code?
d) Is there an archiving / library app. on the market that would allow one to file / name / tag many .mts clips and view them prior to transcoding into space-hungry AIC files in FCE?
Any/all help would be most gratefully received!

I have saved the complete file structure on DVD as a backup, but have not needed to open them yet. But I will add this. As I understand the options with Toast you are infact converting the video to AIC or something like it. I haven't looked into it myself, but I can't imagine the extra files are that large, but maybe there are significant, I don't know. The transcoded files are huge in comparison to the AVCHD file.
A new player on the scene for AVCHD is Clipwrap 2.0. As I understand this product. It rewraps the AVCHD into a wrapper the Quicktime can open and play. This is with the MTS files only, the rest of the file structure is not needed. The rewrap is much faster that the transcode to AIC. So you have the added benefit of being able to play the files as well as not storing the extra files. The 2.0 version (which is for AVCHD) was just recently released. I haven't tried it and don't personally know of anyone who has. You might want to try this, there is a trial version as I recall.

Must I "Log and Transfer" from Canon HG 10?

I have a Canon HG 10 (which is an HDD camcorder) and I'm using a 2.2 ghz macbook pro with OS 10.5.6. I can open the camera's disk image on my desktop and copy the "AVCHD" folder to my hard disk, and everything seems to be there. Question: can I simply navigate to the video clip folder and import the clips into FCE, or would it be more complicated?
In the past, if I copy the "AVCHD" folder to my hard disk, and then make a disk image out of it, imovie has treated the disk image like a camcorder (I haven't tried this yet with FCE), but I'd rather not have to make the AVCHD folder into a disk image-- doesn't seem like this should be necessary. Thanks

I want to keep a duplicate of the camera's information, before it is imported into FCE. I can log and transfer from the camera, but I'd like to keep an exact duplicate of the video camera's disk information on another hard disk even after it has been deleted from the camera. Also, it seems to not take nearly as long to open the camera's disk image and copy the files than it takes to log and transfer into FCE, from the camera, so apparently I don't have to keep the camera connected to the computer as long as long as I can retrieve the files from the copy later.

Log and transfer debauchery!

At first, log and transfer just crashed FCP on my MacBook Pro (just purchased this week). Then I was able to at least keep FCP up but log and transfer would not "see" any AVCHD footage I had on the computer. Then, log and transfer could see the footage but when I tried to add it to the queue, the clip render never started, became idle...then a red exclamation point appear where the status arrows circle around.
I have uninstalled FCP several times using FCP Remover and then reinstalled. Either I am not installing correctly or my software is bunk! I installed my original FCP (4) and then the upgrade to Studio 2 each time. Am I missing something obvious?!?
Thanks in advance!

I installed my original FCP (4) and then the upgrade to Studio 2 each time. Am I missing something obvious?!?
You don't need to do that. Just install the upgrade and enter the serial # that came with it. It will then prompt you to enter the serial from the full retail copy of FCP 4.
Then, log and transfer could see the footage but when I tried to add it to the queue, the clip render never started,
Is the directory structure of the AVCHD card completely intact or do you just have the folder with the clips in it? You need that full directory structure. In other words, the entire contents of the card.
Log and transfer debauchery!
Thread title disappoints:
+debauchery |diˈbô ch ərē|+
noun
+excessive indulgence in sensual pleasures.+

FCE4 error log and no avchd import (log and transfer)

Fresh install of FCE3, update to FCE4, update to 4.0.1 via softwareupdate but unable to import AVCHD material. Here's what the console says:
When starting FCE and while the splash screen is still visible:
25.03.10 13:20:17 [0x0-0xab0ab].com.apple.FinalCutExpress[1635] objc[1635]: Class ProMetadataQTMDStorage is implemented in both /Applications/Final Cut Express.app/Contents/MacOS/../Frameworks/MIO.framework/Versions/A/MIO and /Applications/Final Cut Express.app/Contents/MacOS/Plugins/QTM Reader.bundle/Contents/MacOS/QTM Reader. One of the two will be used. Which one is undefined.
When the splash screen disappeared:
25.03.10 13:20:21 Final Cut Express[1635] Exception thrown while loading plugin "FxPlugWrapper:59854840AFAB_423D_9007252E4EFA55BE": * -[NSCFArray insertObject:atIndex:]: attempt to insert nil
25.03.10 13:20:21 Final Cut Express[1635] Exception thrown while loading plugin "FxPlugWrapper:E3A7ACDE8062_4DA1_8865E9C67BF1E777": * -[NSCFArray insertObject:atIndex:]: attempt to insert nil
25.03.10 13:20:21 Final Cut Express[1635] Exception thrown while loading plugin "FxPlugWrapper:65F1384FAF3D_4583_A6E7B9F3898153A9": * -[NSCFArray insertObject:atIndex:]: attempt to insert nil
25.03.10 13:20:21 Final Cut Express[1635] Exception thrown while loading plugin "FxPlugWrapper:5BDAB25811B3_4D8B_A951152C96943BDC": * -[NSCFArray insertObject:atIndex:]: attempt to insert nil
25.03.10 13:20:21 Final Cut Express[1635] Exception thrown while loading plugin "FxPlugWrapper:B42177EC8BF6_459E_BAF8561A2FE1CE09": * -[NSCFArray insertObject:atIndex:]: attempt to insert nil
25.03.10 13:20:21 Final Cut Express[1635] Exception thrown while loading plugin "FxPlugWrapper:CA0ADC917105_4F1C_8EEAD5A64B98E5DF": * -[NSCFArray insertObject:atIndex:]: attempt to insert nil
When opening "Logging and transfer" to import from my camera, sdcard or the avchd folder:
25.03.10 13:20:31 [0x0-0xab0ab].com.apple.FinalCutExpress[1635] objc[1635]: Class MIOGenericUserDefaults is implemented in both /Applications/Final Cut Express.app/Contents/MacOS/../Frameworks/MIO.framework/Versions/A/MIO and /Applications/Final Cut Express.app/Contents/PlugIns/AVCHD.RADPlug/Contents/MacOS/AVCHD. One of the two will be used. Which one is undefined.
25.03.10 13:20:31 [0x0-0xab0ab].com.apple.FinalCutExpress[1635] objc[1635]: Class MIOObject is implemented in both /Applications/Final Cut Express.app/Contents/MacOS/../Frameworks/MIO.framework/Versions/A/MIO and /Applications/Final Cut Express.app/Contents/PlugIns/AVCHD.RADPlug/Contents/MacOS/AVCHD. One of the two will be used. Which one is undefined.
25.03.10 13:20:31 [0x0-0xab0ab].com.apple.FinalCutExpress[1635] objc[1635]: Class MIOTimecode is implemented in both /Applications/Final Cut Express.app/Contents/MacOS/../Frameworks/MIO.framework/Versions/A/MIO and /Applications/Final Cut Express.app/Contents/PlugIns/P2.RADPlug/Contents/MacOS/P2. One of the two will be used. Which one is undefined.
25.03.10 13:20:31 [0x0-0xab0ab].com.apple.FinalCutExpress[1635] objc[1635]: Class MIOGenericUserDefaults is implemented in both /Applications/Final Cut Express.app/Contents/MacOS/../Frameworks/MIO.framework/Versions/A/MIO and /Applications/Final Cut Express.app/Contents/PlugIns/P2.RADPlug/Contents/MacOS/P2. One of the two will be used. Which one is undefined.
When the conversion/import didn't complete:
25.03.10 13:20:33 Final Cut Express[1635] -[NSProgressIndicator animationDelay] is deprecated.
25.03.10 13:20:33 Final Cut Express[1635] WARNING: Using deprecated NSTreeController internal API. Break on 'observedObject' to debug. Use of this method should be replaced by NSTreeNode/representedObject
The following QuickTime components are installed. Only leaving the marked ones(•) didn't change anything.
/Library/QuickTime content:
AC3MovieImport.component
• AppleIntermediateCodec.component
AppleMPEG2Codec.component
CanonMJPEGAVI.component
DesktopVideoOut.component
EyeTV MPEG Support.component
• FCP Uncompressed 422.component
Flip4Mac WMV Advanced.component
Flip4Mac WMV Export.component
Flip4Mac WMV Import.component
• LiveType.component
SMIQuickTimeExportComponent.component
TSCC.component
Any idea what could cause it and how to solve?

Ok.. more testing and research.
Final Cut Express doesn't support AVCHD Lite.
iMovie (my version is '09 - 8.0.5) does import AVCHD Lite directy from my TZ7.
Since iMovie is nice, but offers a bit less then FCE I just imported the clips from the TZ7 into iMovie, moved all imported clips to the timeline and exported a Final Cut XML. This one I imported into FCE and voila.. realtime editing with FCE of the clips from my TZ7.
A bit strange, that FCE doesn't support AVCHD Lite.. but the way through iMovie is doable.

Weird Log and Transfer warning

So I'm teaching a class and the students have their AVCHD camcorders connected and we're ingesting using Log and Transfer. All the clips appear in the window and it's working fine. But every few minutes, all the students get a warning dialogue that says:
".fn contains unsupported material or has an invalid directory structure. Please choose a folder whose directory structure matches supported media."
All they have to do is dismiss the warning and keep working. But then it will come up again in a few minutes.
Anyone know what this means?
Thanks very much.

I'd try and copy the Hard disk contents to the computer before log and transfer. There may be some material on the camera hard disk that's not part of what log and transfer is looking for and when log and transfer sees those elements, it gives you that warning. Do you want to open the camera's hard disk on the mac describe the folder structure. It's possible you need to navigate to the appropriate folder and mount that in the log and transfer window, not the entire camera hard drive.

P2 log and transfer

Hey guys, Im trying to import some P2 footage and log and transfer won't see it at all. Any folder. I have the same final cut pro on my laptop and it does import it with out a problem. What's up with my computer? they both have the same version and plugins, etc. Also, I used ex footage last week and didnt have a problem seeing that footage
any ideas?
thanks

Perchance could you let us know what versions of FCP you have?
We can't see that from here.
Please give your full system specifications, what computer, what drives, how everything's connected, what settings are on the media, what settings you're using in Final Cut, and finally what version of the software, of the OS, and of QuickTime you are using.
For example, we know what your desktop system is, but we don't have any information about your laptop. We don't know if they share the same OS and FCP version numbers.
We don't know how you are accessing those p2 cards for either computer.
Did you copy the volumes to each? Were the cards write protected before you mounted them.
Did you use FW or USB connect?
Is the same software installed on each? Are you using an earlier version of FXFactory?
All things help.

Cannot log and transfer canon 5D mark3 into FCP

Cannot log and transfer canon 5D mark3 into FCP

Or use Compressor...or 5DtoRGB...or EditReady...lots of options.
Convert to ProRes 422...not HQ. HQ will only take up more space, with zero quality gain.
But yes...log and transfer does not support this camera. FCP was discontinued before it was released.

Hey, I have Final Cut Express 4.0.1 and a JVC everio camera, whenever i try to import my files to FCE via "Log and transfer", it just doesn't do anything, as if FCE doesn't know the camera is there, please help !

Hey,
I have Final Cut Express 4.0.1 and a JVC everio camera.
Whenever i try to import my files to FCE via "Log and transfer", it just doesn't do anything, as if FCE doesn't know the camera is there,
please help !

FCE 4.0.1 can only capture DV/HDV which is produced by cameras using Mini-DV TAPES and cameras shooting AVCHD which is a high definition format.
If your camera shoots standard definition on Memory Cards, DVDs or Hard Drives it will not work in FCE.
What is your camera's exact model name and number?

Log and Transfer: FCE4 won't recognize files from my camera

Hi ...
I have a Sony XHR-NX5U and am capturing video on an optional Sony 128GB hard drive built for this camera. I've shot AVCHD video in both 1080/60i HQ and 1080/60i FX formats, and the camera produces video files in an MTS format (nestled in a series of folders), along with accompanying CPI files (I don't know what these are for).
My FCE4 program doesn't allow me to either import these files or use log/transfer. I've been forced to buy an external program to convert the MTS files into MOV files and then import these (Log and Transfer still won't recognize these MOV files).
What can I do to get FCE4 to recognize and allow the files directly from my camera?
Thanks in advance for any insight you can provide.
- matt

I see your camera can be switched to record a bunch of ways.
Try this one:
AVCHD FH (17Mbps) 1920x-1080/60i
It should work with Log and Transfer over USB.
Also make sure you start a New Project in FCE with the Easy Setup AVCHD-Apple Intermendaite Codec1920 x 1080i60 selected and active.
Some cameras do not seem to transfer if mixed media is on the card. Try a test with the above media ONLY on the card.
Al

Log and Transfer doesn't "see" my camera

Similar Messages

Maybe you are looking for