Log and Transfer inpoint/outpoint timeline problem

When I use the log and transfer, short clips work fine, but longer clips ( around one hour) won't work correctly when I try to set in and out points. The marker on the timeline jumps way to far forward. It makes it impossible to pull clips, and, on another note, the video and audio end up out of sync!  I shoot concerts as a hobby and I'm trying to get shows put up on youtube and get dvd's made for bands. I'm pulling my hair out trying to finish these. Any help?
Thanks!

Hmmm...I have been able to work with both 24p and 1920x1080 footage, but only if the video is about 15 minutes or less.  I haven't noticed an issue with the red render bar either.  I know what it is, I just haven't had that problem.  I downloaded Streamclip, but every tutorial I find is for using dvd's.  I've tried adding my AVCHD clips, but it tells me its an "unsupported file type".  Obviously, I'd doing something wrong, I'm just not sure what.
What kind of file am I wanting to open with Streamclip?  I'm very new to this, so I'm sorry for what is probably a very obvious answer.
Thanks again for the help!

Similar Messages

  • Log and Transfer w/ Sony HVX - problems

    I loaded the log and transfer window with all the footage and added it to queue. Once it was finished transferring every clip shot at 59.94 had a "half-circle" icon next to it, meaning some frames were not captured. Every clip is short about 16 frames.
    But the stuff shot at 23.98 all came in fine and with the "full circle" icon.
    Anyone seen this before?

    I have resolved the issue. Let me explain what happened.
    My 59.94 footage was being transfered to FCP as 23.98. Also, in the log and transfer window my clips had a "half-circle" next to them instead of the usual "full circle". The cause of this was in Preferences, the Remove Advance Pulldown and Duplicate Frames option was checked. After unchecking it, I retransfered the clips perfectly fine.

  • Log and Transfer: DVD-RAM vs DVD-RW

    I recently installed Final Cut Express 4 on my Macbook and I am using a Panasonic AVCHD camera to transfer footage. When I used a DVD-RAM disc the data appeared in the Log and Transfer window with no problems, however I have footage on a DVD-RW disc which I want to transfer. (Despite being RW it won't let me delete footage through my camera) My DVD-RW disc has been finalized and when I plug in my camera it shows the loading color wheel, but no film clips appear in the log and transfer. I look in the actual disc window and all the files for my clips are there, but it doesnt recognize them in log and transfer. Is there some reason that Final Cut Express 4 will only notice DVD-RAM discs?
    Message was edited by: playmaker44

    Is Toast 7 a method of making disk image(s) or
    DVD(s), or are we talking about several different
    things here?
    YES. IT IS AN ALTERNATIVE TO IDVD.
    Also, the reason I bought +RW disks and TWO of them
    at that is that it seems ANYTHING I do needs to be
    done about ten times to be right ONE time (hence five
    days to get titles that play the way I want) and the
    thought of a "write-once" disk scares me.
    SO IF YOU MAKE DISK IMAGES FIRST YOU DON'T BURN ANYTHING AND CAN TEST IT OUT FIRST.
    You know that song, "Mamma's Going to Buy You a
    Mockingbird"? If this doesn't work, then that, if
    that doesn't work, the next, and so on.
    YOU WOULD BE BETTER OFF LEARNING A BIT MORE SEE THE PRECEDING POST
    If the +RW disk won't play in my VCR
    A DVD CANNOT PLAY IN A VCR
    I will try
    playing it on my combo drive in my Mac. If it plays,
    I'll see if there's a way to connect the VCR to the
    Mac and copy it to videotape from that so I can
    finish the rest of the project!
    YOU CAN'T UNLESS YOU CAN FIGURE OUT YOUR CANOPUS BOX BETTER THAN SO FAR
    (The reason I don't
    go direct from the Mac to the VCR, besides the
    generational loss of digital to tape, is that I want
    the opening titles at the beginning, the middle title
    in the middle, the closing titles at the end, and the
    outtakes after that, and if I have to string them all
    together into ONE project I don't see HOW I can put
    them where I want on the tape without a DVD I can
    start and stop!)
    YOU COULD MAKE ON IMOVIE PROJECT THAT WOULD DO THIS, OR SEPARATE ONES, AND USE MULTIPLE CLIPS IN IDVD, BUT HEY YOU'VE BEEN TOLD THAT AND WON'T LISTEN, SO GOOD LUCK.
    If that won't work, I'll copy it
    either from the +RW disk or (if I dare!) directly
    from whatever format seems best to a -R disk my
    friend gave me. If none of these work, then I panic.

  • Problem with Log and transfer using AVCHD

    Hello,
    I was wondering if I can get help. I use a Canon Vixia HF S200 and FCP Version 6.0.6
    I have produced projects on my MacBook Pro 2.33 Ghz Intel Core 2 using this process before with no problems in the past. This problem just started and I dont know what has changed. When I open the Log and Transfer (LT) window I can see and hear all my video from the AVCHD folder in my harddrive just fine, I can scrub with no prob.... But when I add clip to Queue I get an red circle with exclamation on my status.
    I have changed the settings on the preferences to Apple intermediate Codec and the audio to plain stereo.. no luck there, the video still will not transfer to my bin.
    I have made sure that the toggle Queue state was the little arrow instead of the paused icon...no luck there either... i got a message that says clip queued transferring but nothing is happening.
    I will appreciate your help!
    Also I didn't mean to tread jack earlier, please accept my apologies, if anybody saw that...

    OK!!!!! This seriously cost me 1 day of my life that I'll never get back!!! lol
    So I was able to bring the footage in on to Imovie...Yes, I was that desperate...deadlines do that!
    Edited the entire project there...kinda sucked...
    Then I had the bright idea that if I was able to bring the videos in to Imovie, on my local HD...than something may be wrong with my scratch disk that I use on FC...its a USB disk, specs =slow.
    So I changed the scratch disk and yes "Davi S" for good measure I also deleted the Pref files.
    So it working again...here I go editing on FC after I edited the entire project on Imovie...
    Thanks for all your help!

  • Canon Log and Transfer problem

    Hello all,
    I'm trying to upload some HD files from my Canon HF20 on the latest edition of FCP to my iMac 10.58 and running into a problem.
    FCP recognizes the video captured on the internal memory. However, it does not recognize the video captured on the SD card in the camera.
    Any ideas?

    Well, I'm connected to my iMac using a USB. (iMac is running version 10.58 of Leopard). I'm using the latest version of FCP 7.0.2
    I can log and transfer files "taped" to the internal memory of my HF20. Files show up fine and import fine.
    However, the files that are on the SD card in the camera don't show up in the Log and transfer. ( I put the SD card on a card reader and still no luck.)
    I put the card back into the camera and hit the "Add volume" on the top left of the log and transfer and I can see my Canon drive and the other drive which is called "No Name" (I'm assuming simply because I haven't named it anything) I'm also assuming the No Name Drive is the SD card. However, I may be wrong. All the files are grayed out on this drive.
    Not sure what else I need to add to give you more info. Let me know if what other info needed and I'll post it.
    Thanks again!

  • Log and Transfer Video Ingestion problem

    I have a Sony camcorder that uses AVCHD on a HD. Problem is that I have clips that don't want to transfer over using Log & Transfer - only the audio is transfering. I can still see the video on the tool, but the preference for bringing over the video is grayed out - only the audio check box is checked, not the video - as a result no video is coming over - just audio clips.
    I saw other posts on this topic, but no resolution. I'm using FCP Studio (latest version - I think 7.02. This is quite frustrating. Anyone have an idea? Is it a camera problem or a FCP problem? As I can see the video on the camera and in the Log and Transfer window, it feels like a software glitch.
    Help!
    [email protected]

    Thanks Tom...so simple...sort of like "did you take the lens cap off?"

  • Log and Transfer problem with MXF files

    Hi, folks.  I've spent an hour searching the threads, but I haven't found an answer to my problem (or anyone who's had the same problem).  Please help if you can!
    We're using the Canon XF300 and we tested some footage a couple weeks ago.  We ingested it into Final Cut Pro (7.0.3) using Log and Transfer (after installing the Canon plugin) and it all came through perfectly.  Worked without a problem.
    Now, we have a week's worth of field footage, captured exactly the same way, transferred to the same hard drive, exactly the same as the test footage...
    See what I'm getting at?  EVERYTHING has been done the same.  Identical.
    And yet the new footage is not being recognized in the Log and Transfer window.
    Instead, this is what's happening:
    What gives?  Everything we're doing is identical to the testing we did a couple weeks ago.  Like I said, I've searched the forums, read a couple dozen threads, followed the Creative Cow link mentioned in several of them.  I must be missing something.  Please fill in the gap for me.  Thank you!
    Like I said before, we've downloaded the Canon plugin, imported test footage at ProRes 422, watched it, edited it, enjoyed it.  But now our new footage is unrecognizable by FCP.  And the directory structure is identical to that of the test footage.
    Sigh...

    UPDATE --
    The field producers transferred the footage incorrectly.  They left off the master directory and went in 1 directory too far.
    Yes, David, the frame rate was all the same (30p).
    Russ... I imagine you were going to say something along the lines of "MAKE SURE YOU INCLUDE THE ENTIRE DIRECTORY."  Leave nothing behind.
    Now... the question is... can I create a new CONTENTS folder and simply drag the CLIPS folder into it?

  • Log and transfer problem with prores files

    Working on RED project. Started several months ago. Shooting and logging as we go. Project setup on FCP, RED media converted to prores422 proxy with RED software(rocketcineX) and saved on Internal 2 TB RAID. NO problems for past 4 months. Moving prores422 proxy files into FCP via Log and Transfer. (I thought this was necessary, is it?) Anyway its working just fine. Loaded a thousand or so clips to date. Last transfer was August when brought in some P2 media. Now when I go and try to bring in the prores422 proxy clips as before suddenly I get error message of "unsupported media or invalid directory structure. This even applies to all the older files that I had already transferred by log and transfer. They worked before but now they don't. Any suggestions as to why the change? The project will be conformed back to original RED r3D files after edit. Any help greatly appreciated.
    Thanks,
    Jeff

    First, get Preference Manager from Digital Rebellion (free) and trash FCP preference files. Run Disk Utility to repair all drives (Repair Permissions on OS drive). This should be done once a week, anyway. Disk Warrior would be your last resort (and should be run once a month on your drives, anyway). If Disk Warrior won't fix the problem, you have a dead hard drive. Replace it, restore from the backup you've been making of your data on a regular basis. I mean, you do have a backup that you do almost daily for such a large and important project, right?

  • Log and Transfer problems

    i have the new HCM150P Panasonic AVCHD camera. I have a duo core, 4 gig ram, external hd on usb 2.0 (new G Tech TB). When I shoot 1080p24 i have no problem with log and transfer, however, when I shoot 1080p30 my log and transfer has serious issues.
    It ingests the video but with dropped frames, interspersed solid green frames and heavy stuttering. I tried the Perian pref fix but it didn't work. I got some good footage I'd sure like to use in the next project, please help with ideas...
    thank you very much,
    C

    I am having the same problem....are you running an intel mac or pre-intel? I have a second G5 here that is intel based and Log and Transfer work flawlessly. Mine will work once I will see the footage and then after closing it the footage will not re-load.

  • Log and Transfer Problems. Vixia HF10

    If you have used this camera before. Yes the format is weird. Now I recently purchased Final Cut. And when I try to use Log and Transfer...It won't transfer. Like My Easy Setup is set to HD Apple Intermediate 1080i60.
    But when I drag the video. It gives me a red exclamation. It's connected by a usb. But it does not have a firewire cable.
    How do I get my Final Cut to transfer. It doesn't even start to transfer. It just shows the processing icon. and Then it goes to the red exclamation

    Hi -
    Verify that you are using FCE 4.0.1.
    Connect the camera via the USB cable.
    Open the Log and Transfer window.
    Click on the little gear shaped icon towards the upper middle of the L&T window
    !http://www.spotsbeforeyoureyes.com/L%26TPrefs.jpg!
    Select Preferences from the drop down menu.
    When the preference window opens, set the AVCHD Plug-In audio format to Plain Stereo.
    !http://www.spotsbeforeyoureyes.com/L%26TPrefsToPlainStereo.jpg!
    Now try connecting the camera and see if you can import your files via Log and Transfer.
    If there are clips on the camera memory that are recorded with different settings, this can cause problems. The clips need to be all HD clips.
    Hope this helps.

  • Canon HF-10: Log and Transfer AVCHD Problem

    When I try to Log and Transfer clips from my HF-10 on my Mac Pro (Intel, Dual-Quad Core) I get the following message "AVCHD media is unsupported on PowerPC based hardware." even though the machine is an intel-mac.
    When I do it on my Mac Book Pro (Intel, Dual-Core) it works fine in Log and Capture.
    Can someone please tell me how to correct this issue on my tower? I've followed the steps listed on this document: http://discussions.apple.com/message.jspa?messageID=7194922#7194922 and it didnt help me.
    Please help!!!!

    Not until you've searched the data base on that camera with the link I provided. You probably should search this forum and the forum at http://www.creativecow.net (the FCP forum there) on your camera and on AVCHD etc. But sure sounds like a software problem... the machine seems to be sending the signal to FCP that it is a PPC and not an intel... so I'd guess that to be a software install error of some sort. But it's a guess... That's why I suggested the reinstall to rule that out or fix you up...
    Jerry

  • P2 Log and Transfer Problem

    I'm trying to import footage shot with these specs: (with FCP 7)
    Panasonic P2
    720p (960x720)
    25 FPS
    DVCPRO 720/25p codec
    The clips open ok with log and transfer, but once they are transfered the footage has the following errors:
    - Playback rate is wrong. Everything plays back at half speed.
    - Audio drops out at exactly 2 seconds and 9 frames on every clip.
    I tested a clip shot on the same camera in a different format (720/25PN camera native codec) and it transfered fine. No problems at all.
    The error only happens with footage shot in 720/25P (DVCPRO).
    Does anyone know what is going on with this?
    Thanks

    In the P2 Browser, there is a little sprocket drop down menu. Click on that and choose PREFERENCES. Uncheck REMOVE PULLDOWN and then try importing again.
    Shane

  • Log and Transfer in Background causing big problems

    I don't know if you are supposed to be able to have Log and Transfer importing in the background while you edit, but it seems to allow me to do this, but I have found a VERY BAD side effect.
    Log and Transfer goes about it's business importing, but if I click around in the the bin, playback other files that are already imported, etc.  Log and Transfer will not fully import the clips it is working on.  BUT, instead of giving me ANY error, it simply thinks it did it's job.  The end results is a clip in my bin that is maybe 10 seconds long and the matching clip on the SD card is 5 minutes!  No error messages anywhere.
    At first I thought I had accidently stopped recording on a good number of my clips.  I was freaking out.  Thankfully I found that the clip on the SD card was the full 5 minutes long.  When I reimported it (without doing anything in FCP at the same time) the full clip came in.  (THANKFULLY I had a disk image of the SD card and wasn't just relying on my backup for the FCP files post import).
    Now I just make sure not to do anything in FCP while it's importing from Log and Transfer, but it seem like quite a dicey situation that could get people in a log of trouble.

    Me too.  I've learned the lesson.  But I thought FCP used to NOT allow this.  It would beep and not let me do anything else.
    I'm sad they let you do it, because someone can do it without realizing importing is still going on and mess things up and not realize it until down the road in the edit and be screwed.

  • Log and Transfer problem with Canon DSLR

    I have not been able to make Log and Transfer work with my canon 5D mrk II files. I can import the files or even drag and drop them into FCE but never have been able to get them to come in using log and transfer function. I have tried every kind of file conversion using quicktime Pro and MPEG StreamClip. Does anyone have a way of getting their files into FCE using this function?
    All I ever get is this error:
    "DCIM" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media.
    My file structure from the chip is: /DCIM/100EOS5D/MVI_**.mov (and also) MVI_**.thm

    have you loaded the canon plug in for final cut? this may be the simplest way for you to get those files into FCP.
    http://www.usa.canon.com/dlc/controller?act=GetArticleAct&articleID=3249

  • Log and transfer problem with cannon hf100 (AVCHD format)

    Ok.. the preview look good in the log and transfer menu, but when I transfer them and click on them in the browser they play super blured, pixeled, funky.. What am I not doing?? Thanks for any help!!

    Command zero will show your sequence settings.
    This is kind of important.
    And what did you set as destination codec in the Log and Transfer window ?
    Have you read the release notes on transferring AVCHD and also any of the knowledge base articles?
    http://docs.info.apple.com/article.html?artnum=305997

Maybe you are looking for