LOG AND TRANSFER [invalid directory structure warning]

I have just learned to use media manager and have cleaned out and archived some of my p2 and projects in FCP. I went to log and transfer some footage and am getting the message.
"This file has invalid directory structure. Please choose a folder whose directory structure matches the supported media??
PREVIOUSLY, before I became familiar with media manger, I had gone through files, P2 contents files and taken out some audio files that i know I didn't use. I discovered this is a mistake and returned all files but one to their appropriate contents files. One of them, I couldn't find where it came from so I just took it out of the trash and placed it on the source hardrive where all my P2 footage is stored.
Is this lone audio file causing the warning message? Please help.
catherine

Shane, out local P2 wonk, will chime in if he's dealt with this but you need to talk to Panasonic.
bogiesan

Similar Messages

  • "00004.MTS" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media. is message I'm getting i have a sony nex-vg10 my buddy use my cam came over log an transfer with no pro

    "00004.MTS" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media.
    when i try log transfer from a sony nex-vg10 but my buddy can do it with no problem on my cam an mac

    If you copy the recordings from AVCHD cameras, you must copy the entire storage device with its directory structure intact.
    I have even tried copying BACK files onto the camera and they do not show up in the transfer window under the last clip.
    There is no information for those clips in the AVCHD storage device's directory index files. That means there is no way for the computer to find them.
    Your last resort is most likely [ClipWrap|http://www.divergentmedia.com/clipwrap] now, unless you can get the storage device exactly back into the state it is supposed to be according to the index file.

  • Weird Log and Transfer warning

    So I'm teaching a class and the students have their AVCHD camcorders connected and we're ingesting using Log and Transfer. All the clips appear in the window and it's working fine. But every few minutes, all the students get a warning dialogue that says:
    ".fn contains unsupported material or has an invalid directory structure. Please choose a folder whose directory structure matches supported media."
    All they have to do is dismiss the warning and keep working. But then it will come up again in a few minutes.
    Anyone know what this means?
    Thanks very much.

    I'd try and copy the Hard disk contents to the computer before log and transfer.  There may be some material on the camera hard disk that's not part of what log and transfer is looking for and when log and transfer sees those elements, it gives you that warning.  Do you want to open the camera's hard disk on the mac describe the folder structure.  It's possible you need to navigate to the appropriate folder and mount that in the log and transfer window, not the entire camera hard drive.

  • "Invalid directory structure" AVCHD with Log & Trnasfer FCP 7

    i was brought a hard drive with AVCHD files. i have been trying to import those AVCHD files into FCP 7 using the Log & Capture tool, but whenever i select the AVCHD folder i am told ""No Name" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media."
    i have been trying to find out what the correct directory structure of AVCHD files should be.
    here is what my folders look like:
    AVCHD > BDMV > (contained within the BDVM folder) BACKUP, CLIPNF, PLAYLIST, STREAM, INDEX.BDM & MOVIEOBJ.BDM
    is this structure correct? how does one interlace that footage once it has been imported into FCP? the video was shot in interlaced but i have to work with it in ProRes 422!

    When a camera's card is archived to a disk, it must be the entire card, not just the folders within it.
    This is best achieved by making a Disk Image.
    When you use Log & Transfer, select the card, not the folders inside. Or in this case, you might get away with selecting the hard drive itself.
    have to work with it in ProRes 422!
    ProRes also works with interlaced footage.

  • Am I able to Log and Transfer m2ts WITHOUT proper folder structure?

    Basically what the question says... I've been trying to convert some m2ts footage for use with FCP, and have only just discovered that I could Log and Tranfer it. Unfortunately, the footage I would like to Log and Transfer no longer exists in the proper file/folder structure, just as m2ts files.
    Is there still a simple way to use it in FCP via Log and Transfer, or at least without losing quality?
    Thanks in advance,
    Mark

    You cannot use log and transfer without the folder structure. Use ClipWrap2 to transcode the media.

  • Trouble with RED Log and Transfer in FCP6

    Hi there,
    I am cutting my first RED feature and am having an issue getting all my footage into FCP 6. I decided to go with the RED Quicktime files and am Log and transferring them in as we speak. Most of the footage was able to be dropped right in with no problem what so ever but I am on the last 1TB hard drive and it won't mount the folders to transfer the footage except one. One folder when in fine but the rest won't even mount. I tried importing each .RDC folder in on its own but I get an error:
    WARNING
    "A008c001_0212LV001.R3D" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media.
    Obviously these files are put together the same way as the other couple hundred files but these ones are giving me trouble. Has anyone else ran into this problem and how do I get the footage in.
    By the way I can open the .R3D files in Red alert without any problem
    Thanks,
    ~Jake

    A while has passed, unfortunately. I've been working my way through this mess, as well.
    When you get the "unsupported media or has an invalid directory structure" message it usually indicates that a catalog-like file is missing. The same now happens with P2 transfer.
    Check for an ".rsx" file within the RDC folder. Log and Transfer may not be happy if this file is missing. Sometimes it gets missed when the media is being consolidated across drives.
    ** What I'm having trouble with now is that Log and Transfer repeatedly fails to load a selected directory --- except on the umpteenth attempt. You know, the one where I'm beyond the point that most normal people are up the Bell Tower sniping at the citizenry.
    jPo
    Message was edited by: JP Owens

  • FCP Crashes when I Try to Log and Transfer

    I just got a new iMac and installed a new copy of Final Cut Studio on it. I'm trying to transfer footage from my camera (Cannon Vixia HFM300) to Final Cut Pro via Log and Transfer. When I first tried, the thumbnails came up fine. I realized however that I had the wrong SD card, so I switched it. Now as soon as the Log and Transfer window comes up, FCP quits unexpectedly.
    I've tried disconnecting the camera and restarting the computer. Log and Transfer comes up fine when the camera's not connected. But when it is, the Log and Transfer window comes up for a second or two only, and then FCP crashes.
    I'm not sure what else to try. So any help will be much appreciated!

    So heres a status update:
    Someone suggested that I copy the files off the camera and onto the computer, then eject the camera, and try to Log and Transfer from the new folder.
    I tried that and FCP isn't crashing now, so that's an improvement. But when I try to open the folder in the L&T window, I get the following error message:
    Warning
    'Folder Name' contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media.
    Any suggestions?

  • Canon 550D/T2i log and transfer problems

    Hi there...
    I am trying to use log and transfer to get footage from my Canon 550D into Final Cut Pro (6.06)
    I have installed the Canon E1 plugin and modified it in accordance with instructions elsewhere but alas everytime I try to transfer the footage I am warned it the directory structure is invalid.
    Does anybody know a way around this other than using Compressor or MPEG Streamclip?
    Any help you can give will be greatly appreciated

    try running a "System Update"
    make sure you have your copy of fpc is up to date.
    that did it for me. I am no longer getting that "Invalid File Structure" warning
    and can just move the files to my external drive and log and transfer sees them.

  • Log and Transfer Issue with JVC Camera.

    Hello all,
    I am using JVC GY-HM100U and Final Cut Studio (FCP7.0.3).
    I have installed JVC_Plugin1_0_3.dmg as Apple recommended.
    However, when I connect SD card to FCP, I can not still use 'log and transfer' of FCP.
    Do you know what's the issue is?
    Thank you.

    The warning sign pops-up as below.
    "CLIP" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media. 
    I am recording in Kingstone 16GB Class 10 SD card.-I have formatted before using it.
    I am shooting with 1080 60i.
    Thank you.

  • Log and Transfer window doesn't recognize Samsung SC-HMX20

    The camera does appear on the desktop however, so I can navigate to the video folder on the camera and upload the video files to my computer, which I can then edit in FCE.
    Is this the correct workaround?
    Also, anyone working with this camera (I shoot at 1080/30p) and FCE?
    Would appreciate any comments on your particular workflow in FCE - from getting your footage off the camera, to what settings you use in FCE.
    Thanks in advance.

    Thanks for replying, but I don't think that this is the issue (the files play back fine on the camera - also I can manually move them from the camera storage into fce - it's the Log and Transfer function that won't recognize my camera).
    As a side note, when I use the Log and Transfer function, I get an error message that reads: Warning - "Video" (+the folder on the camera that has my video files+) contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media"
    I suppose if someone could explain that error message in plain english then I might get somewhere ...

  • Is there a way to import clips from AVCHD folders I have copied from my camcorder to my hard disk? With FCE I could import these clips using log and transfer.

    In FCP-X is there a way to import AVCHD clips from an AVCHD file folder I have copied from my Canon hard disk camcorder to my iMac hard disk?  With FCE I used log and transfer with no problem; but, FCP-X doesn't import them. It will import AIC files that have been created in FCE from the original AVCHD files.  If FCP-X will not import these files directly from the copied AVCHD folder, is there a workaround using other software to convert the files? For example, Compressor? (Canon does not provide any AVCHD conversion software for OSX).

    Hi jphil and Tom
    I have exactly the same problem but the answer you (Tom) provided did not help in my case. Trying to "Import ->From Camera" and pointing to the AVCHD folder yields the error message: "(Folder) contains unsupported files or has invalid directory structure."
    Folder structure is
    AVCHD
         BDMV
              CLIPINF
                   .CPI files
              Index.bdm
              Movieobj.bdm
              PLAYLIST
                   .MPL file
              STREAM
                   .MTS files
    AVF_INFO
         3 files (.bnp, .inp, .int)
    DCIM
         101MSDCF
              empty
         MODELCFG.IND (file)
    My question is: Is that not a "camera archive" of the type you talked about in the thread? Is it on principle not possible to import the files in that format/directory structure? If not, since the shots were not taken by myself, what should I ask the guy who shot the movies to give me to be able to work with them in FC?
    I work with a brand new Final Cut Pro X 10.0.4 (still very clumsy with it) on an iMac 11,3 with MacOS 10.6.8.
    I downloaded the latest version of codec updates from the Apple support site but no difference.
    Thank you in advance
    Giorgio
    Freiburg, Germany

  • Log and transfer question

    OK I was wondering if when I import AVCHD from my hard drive if the original files would be damaged at or removed at all. I just had a slight issue, and was wondering if that would be a problem. Any advice is appreciated. Thanks!

    my apologies. I have a 750 gb. usb harddrive that I use for storage, and a Sony Handycam hdr-cx7. I thought that maybe I could drag all of the contents from my memory stick into a folder and import them as needed using log and transfer. What made me ask the question was basically what is the transfer part. I'm sorry if I'm wasting your time. Anyway, I did that with some test AVCHD video and it came out OK, but tonight when I went to import it again, because I didn't save my work (I was just messing around) it gave me a message that says, ""08:5:29" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media." This may be my procedure problem, but it is nice to have the storage option. Thanks again.
    Message was edited by: movie_man

  • FCP7 Log and Transfer, Unsupported Media . . .

    Last night I used two different SDHC cards in my Canon Vixia HFS100.  FCP7 will import clips via Log and Transfer from one, but not the other.  It just ignores everything on it (but I have 1.4 GB of recordings on it). 
    When I copy the card to a hard drive and point Log and Transfer to that folder, I get the message "CANON contains  unsupported media or has an invalid directory structure"
    Before using this card, I did a full initization of the card.  I compared the directory structures of the two.  They appear identical.  I haven't messed with either in the Finder.
    How do I tell what is wrong?  How do I fix it?  Or should I just try converting with something like Voltaic?  I'm an FCP beginner.  So, I would rather not stray too far from its work flow.
    Thanks!

    On the card that you are having trouble with:
    1) make sure there are no still images
    2) make sure there is no non-hd video (log and transfer works with AVCHD HD video clips, not MPEG SD clips)
    3) if possible, all the hd video clips should be of one quality/size/format setting
    4) in the log and transfer window, click on the gear shaped icon in the top center of the screen to set the Log and Transfer Preferences:
    Set the Import Preferences for AVCHD to Plain Stereo:
    Click OK, then restart FCP, reconnect the camera and try again.
    MtD

  • Invalid Directory Structure Error

    So I recently purchased a Panasonic AG-HMC40 and it's my first experience with a non tape camera. When I tried to get the footage onto my computer Final Cut wouldn't recognize it. It worked in iMovie but I would rather not lose quality by transferring it through that first. When I try to open the folder within the log and transfer screen I get an error message that says that it contains unsupported media or "Invalid Directory Structure." I'm on FCP 6.0.5.

    I quite believe it.
    Can you exactly describe what you're doing and how FCE behaves?
    Do you see a preview of the clips after connecting the camera?
    Try to import using iMovie, when this works, it should in FCE somehow, too.
    I googled a bit around and found someone having the same problem (but unfortunately in german language).
    He has formatted the SD card using the camera, then it worked. But the clips beeing on the SD card before are still lost. But if you backup before, you can convert the .mts files into .mov and then import it into FCE.
    Some other possible source of errors:
    - is the HF 100 power cable connected for transfer? (it has to be)
    - did you see the "mode selection" screen when connecting to your Mac?
    - if yes, did you select the "PC mode" there?
    - does the USB port you are using work with other devices?
    - can you try using an SD Card reader instead of the camera?
    - do you see the camera device icon after connecting to your mac?
    - can you try it on another Mac if it works? (if not, it may be a manufacturing issue)
    At moment no more ideas...

  • Can't Import Sony AVCHD Using Log and Transfer

    HI
    I have been importing AVCHD footage from all kinds of cameras, mainly Panasonics for over 4 years now using Final Cut Pro 7.  I just got a new Sony NEX-EA50 but when I try to import the footage using Log and Transfer, it does not show up.  When I try to drop the card folder into the window I get the ""PRIVATE" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media." message.
      The only way I can import the footage is using Toast, but that is a pain in the *** because it is a hassle to rename and scan the clips before I import. 
    Does anybody know whats going on?  Did Sony purposely change their file directory system so it couldn't be read by FCP? 
    Thanks in advance.

    Hi,
        What framerate did you shoot ?
    Log and Transfer will not recognise non standard frame rates such as 50 fps or 60fps. Toast, Clipwrap etc is an option but there is another. If you have the Panasonic AVCCAM importer Quicktime plug in, it will allow you to convert to Pro Res through Mpeg Streamclip or Compressor.
    DM
    Hang on, are you pointing log and transfer at the ROOT folder and not the folders inside.

Maybe you are looking for

  • Issue with characterset setting in OWB flat file target

    an OWB mapping reads from the database source and writes to flat file target in unix os but junk characters are displayed for non english characters in the target file . The database table contains french,spanish,german,arabic characters.The nls db p

  • Image Control in ADF

    Hi, I am using the Jdev 11g. is there any component which will take array of images path and rotate it. my problem is -- I have n number of images and i want to show it in rotating fashion. please tell how will i do it using the ADF component. Thnaks

  • Playing video on eMac is very slow.

    Hi I have an eMac 700mhz with 640mb of SD Ram running Mac OS X 10.3.9 and video is very slow but weirdly videos on YouTube play fine and are not choppy or slow at all. I have the latest version of flash that will run on this OS : Adobe Flash Player 9

  • Group by change the sql plan by adding "filter"

    The table is created by: SQL> create table t1 as select  1 a,rownum b, rownum c from dual connect by rownum<10000; Table created. SQL> create index t1_idx on t1 (a,b); Index created. SQL> exec dbms_stats.gather_table_stats(null,'T1',cascade=>true,est

  • Avid Unity with Adobe Premiere Pro CC and After Effects

    Has anyone used Avid Unity for media with Adobe Premiere Pro CC? I'd like to hear some feedback as we are working on doing that right now, and I'd like to know what the hurdles or pitfalls might be.