Log and Transfer issues

I have a 2GHz Mac Book Pro with 2 GB or ram. I use this quite a lot when shooting and editing with my Panasonic P2 (HPX2000). Usually, I log and transfer DV, DVC Pro and DVC Pro 50 files with no issues. The other day, I shot a concert in 720P and when trying to log and transfer a 40 minute video, it would not finish. It would show the file transferring, but show the exclamation point at next to it, alerting me that it had problems. I was able to transfer over small chunks and edit them together in FCP, but I wonder if this is a ram issue or something like that. Any thoughts?

#36 - One or More P2 files failed to import.
Shane's Stock Answer #36 - "One or more clips failed to import..."
Very often in the field with this camera the camera operator will delete clips from the P2 card that they just don't like. That is the beauty of this camera. But, the still for that video file (located in the CLIP folder in the CONTENTS folder)...the still that you see when you are in the P2 Import window...is not deleted. So you will see the image, and the name, but the video file would have been deleted.
What you can do it compare the file names in the VIDEO folder and CLIP folder and see if anything is missing. If something is, then you know what the problem is. You can then just import the rest a few at time, skipping that one.
ALSO...in the P2 Import window...in the P2 Browser, there is a little sprocket drop down menu. Click on that and choose PREFERENCES. Uncheck REMOVE PULLDOWN and then try importing again.
ALSO...make sure your file names aren't too long. Try shortening them and see if that works.
ALSO make sure that the folders that contain the CONTENTS folder doesn't have any odd characters like /!@#$%^&*()?.

Similar Messages

Log and Transfer Issues - Canon HF10

I have just recently acquired a Canon HF10 video camera and have had success getting some of the video to my Mac via log and transfer, however when the video files seem to be much longer than a few minutes the process fails. The status bar while it's transferring makes it all the way to 100%, but the file itself never moves up to the browser. When I click the file in the log and transfer window after the status bar has stopped moving I get a red exclamation mark with unknown error. Any help on this will greatly be appreciated.

I believe I have figured out what the issue is. I was using an old 250Gb external as my scratch drive. Well - this drive is in FAT format and I just discovered that the FAT drives are limited to 4GB limit, hence the reason I couldn't transfer my larger files. I'm planning on reformatting this drive to Journaled OSX and I should be cool.

Log and Transfer Issue with JVC Camera.

Hello all,
I am using JVC GY-HM100U and Final Cut Studio (FCP7.0.3).
I have installed JVC_Plugin1_0_3.dmg as Apple recommended.
However, when I connect SD card to FCP, I can not still use 'log and transfer' of FCP.
Do you know what's the issue is?
Thank you.

The warning sign pops-up as below.
"CLIP" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media.
I am recording in Kingstone 16GB Class 10 SD card.-I have formatted before using it.
I am shooting with 1080 60i.
Thank you.

P2 log and transfer issues (6.0)

In light of the recent 6.0.2 problems, I decided to use a friend's machine to import some P2 data. He has 6.0. I imported the cards a.o.k. except for one.
Log and transfer attempts to read the data (after assigning the custom path) and after a couple seconds, final cut just quits and gives me the following error message:
"The application Final Cut Pro quit unexpectedly. THe problem may have been caused by the libMXFSDKr.3.2.0.132.dylib plug-in."
Has anyone experienced this? What are my other options for P2 reading/transferring ?

Enzo,
ho trovato quest...ooops! Sorry
I found this in my favorite links!
http://panasonic.sixbullets.net/
Hope one option or another will help you to transfer content from that P2 card.
G.

Log and transfer issues or xml settings issues

Hi All
I dont know if this is a problem for anyone else.
This problem arises from log and transfer of red footage.
1. In version FCP6 the xml created from fcp for flame was absolutely fine.
2. Since we loaded 7 the xml keeps making the file name the folder name ...ie
A001C011040745, but when i generate my xml for flame it looks for A001_0407VQ.RDM.
I have loaded a xml from version 6 into 7 and redone the xml but its fine.
This only seems to happen with log and tx in version 7????
and this is across 4 x version fcp 7 machines.
any help will be good thanks

You said you have some FCP6 sets still.
I don't think there is a fix (other than sending [Feedback to Apple|http://www.apple.com/feedback/finalcutpro.html].
But you can do some troubleshooting yourself.
Export an XML 4 from FCP7.
Import that in FCP 6
Export an XML 4 from this new FCP6 project.
Does the FCP6XML4 import properly in Flame?
If so, then open both XMLs with a texteditor and compare the two.
You can use the free [Textwrangler|http://www.barebones.com/products/textwrangler> application for an automatic comparison.
It might be that Flame is choking in a header only and that changing the header will fix this. I'd also give Flame (Discreet? AutoDesk?) some feedback about this problem.
Rienk

Canon HF S20 and Express log and transfer issues

I know another thread addressed this, but there was no solution (that I found).
I get the red octagon with the ! sign in the "status" column when I try to put clips in the queue from my Canon Vixia HFS20. I'm guessing this means FCE doesn't support my brand new camera, which probably means I have to shell out the grand for FCP- which I can't because I just bought the mac, express, and the camera (broke).
any suggestions?

Hi -
Your camera should work with Log and Transfer and FCE.
Did you record your clips in either the MXP or FXP modes, and at what frame rate?
Thanks
MTD

A conclusion to ALL the AVCHD/.mts Log and Transfer Final Cut Pro 7 issues

Hey all! Happy 2011!
So this is my first post here and hopefully when this thread concludes with all your help we should be able to help a lot of people and save them the heartache that I have recently had to endure by stating these things in plain English. I have some questions at the end which I think could be answered very easily! Please, no gobbledygook!
It would be great if people in the know can confirm/deny or comment on my points so those that are in a similar position to me can save their time and just get on with it.
1) I have a Panasonic HDC-TM300 and it records in AVCHD/.mts files
2) FCP 7 can deal with AVCHD files via the Log and Transfer feature if you do it straight from the camera or memory card and can convert to ProRes 422 (LT)?
3) Log and Transfer _*DOES NOT WORK*_ if you move the AVCHD/.mts to an external drive without maintaining the folder structure?
4) What is required from the folder structure that makes FCP act this way?
5) Basically I have f*ed it by doing the part 3 above which I think is the most natural thing in the world to do! Im sure that many people have done the same thing as me please correct me if i’m wrong
After a lot of research on the internet I have come up with the following solutions and in brackets my thoughts on them. If anyone has any experience with them please please let me and other people know so I can get on with my life and editing these files.
a) Harass the people that make FCP 7.0 and make sure that the next update solves this stupid/idiotic/ridiculous oversight. (This could take a while but i think we should do it for the sake of future generations)
b) Someone could let us know about a workaround to this that may be the folder structure that FCP needs to be able to do L&T (needs to be simple so that everyone can do it. This would be the best short term solution until part a is completed)
c) Buy one of the converter programs such as ClipWrap, Toast Titanium or Aunsoft mts converter. If so which is the most/ least recommended and why? (Least desirable option due to requirement for extra program so extra faffing and extra cost).
Thanks y’all and keep up the awesome work!!
K*

2) FCP 7 can deal with AVCHD files via the Log and Transfer feature if you do it straight from the camera or memory card and can convert to ProRes 422 (LT)?
Yes.
3) Log and Transfer DOES NOT WORK if you move the AVCHD/.mts to an external drive without maintaining the folder structure?
This is true of ANY tapeless format.
4) What is required from the folder structure that makes FCP act this way?
This is due to the fact that most of them have files in those other folders in that structure that FCP needs to access in order to get all the proper components assembled properly. Sure, there are formats that have folders with nothing in them. Doesn't matter, FCP is designed to look at the full structure and work from that.
5) Basically I have f*ed it by doing the part 3 above which I think is the most natural thing in the world to do!
The most natural thing in the world is to NOT backup everything? Well, that might be the case, since this comes up so darn often. But, it is wrong. The full structure must be maintained. This is true of many tapeless formats and more than just FCP. Avid and Premiere need this for certain tapeless formats too.
a) Harass the people that make FCP 7.0 and make sure that the next update solves this stupid/idiotic/ridiculous oversight.
It isn't an oversight. It is designed like this on purpose. You need to learn how to do things right. You obviously know what that is now...keep the full card structure. So now it is up to you to continue to do things properly. Instead of insisting that an NLE conform the way it works to suit your needs.
b) Someone could let us know about a workaround to this that may be the folder structure that FCP needs to be able to do L&T (needs to be simple so that everyone can do it. This would be the best short term solution until part a is completed)
Easy. Shoot a small bit on another card. Look at the folder structure. Recreate that structure in your backed up footage. Often this will mean making folders with exact names, even if they are empty. But if they have files in them, even small ones, then the first backup you did might not work....because those might be some of the small files FCP needs in order to do the L&T process properly. Always worth trying though.
c) Buy one of the converter programs such as ClipWrap, Toast Titanium or Aunsoft mts converter. If so which is the most/ least recommended and why?
I highly recommend Clipwrap. Mainly because I haven't tried the others. But also because the author is always following the latest formats, and works hard to make sure his software works with them. It solved an importing issue I had with the Sony NXCam camera...within a week of me moaning about the issue.
Want a tutorial to walk you through the tapeless workflow in FCP? I have one. Tapeless Workflow for FCP 7 Tutorial You might know most of this, but watch it for other tips.
Shane

Canon HF20 - Issue w/ Log and Transfer in FCE

I just bought Final Cut Express 4, How do you know if you have the most up to date version? How do you upgrade?
The Video shows up, but it WILL NOT "log and transfer" I have tried to drag it down and drop it in and it acts like it will process it, but it will say 1 Clip Queued - Idle, The status then shows up as a Red Octagon with an exclamation mark.
I will do anything for answers,
the only way I can get video into fce so far is by uploading it to imovie then importing it in...
ANY Help- PLEASE!!!

Perian = I do not have that downloaded. Should I?
The only way I could get video into FCE is through importing it in. When the video plays in the canvas, the video is huge and I only get a portion of the screen....It looks really zoomed in. I'll gladly paypal you anything if you can help me through these beginer issues.

Log and transfer MTS file and audio slip issues

I'm having 3 issues with a 30 minute project in FCE HD.
1. When I create clips in log and transfer, sometimes my footage chatters when I watch in in the viewer or place it on the timeline. It didn't chatter in camera, I checked, and it doesn't chatter in log and transfer. I can re-cut the clip in log and transfer but I'm trying to save time!
2. When creating a clip in log and transfer or just transferring a full clip, FCE trims the last 3 to 4 seconds off. I need these 3 to 4 seconds!
3. When trimming and razoring a 9 minute+ clip on the timeline, the audio begins to slip and continues to slip the longer I trim.
If anyone has answers to my three issues, please help. This project is frustrating in content and now it's frustrating in editing!
Thank you in advance for all your help!!

Sorry it has taken so long for me to get back to you. Again, thank you for taking the time to help me.
Your first question, these clips came from my Panasonic HMC 150 camera. I filmed at 24 fps. I downloaded the files from my SD card to my laptop, then use log and transfer to bring the clips into the project.
FCE only offers 25 fps or 29.97 fps. So, there is a discrepancy there. I'm not sure how to fix that when I want to stay with 24 fps. Yes, I can film at other frame rates, I just prefer 24 for what I generally create. Is there a plugin for more frame rate choices in FCE? Or is that just available in FCP?
Your second question, I always use insert. I only use overwrite for my title cards.
And finally, your third, I am aware of the destination tabs. I understand how they work. My issue with having so many tracks is that I am working on a laptop without a mouse and sometimes when I move a clip the timeline jumps and creates the extra tracks when I place the clip. I just need to be more careful when moving clips.
Now, as to my final issue and that is the trimming of the clips through log and transfer. FCE trims off the first and last couple of seconds and will not allow me to bring them into the project. Is this a setting problem or just inherent of FCE?
I look forward to hearing from you!

Issue with XDCam log and transfer update

I'm trying to install Sony's XDCAM EX Log and Transfer Plug-in, and only can get as far as the "Destination Select" tab, where I'm informed that it "can't be installed on this disk. Final Cut Pro 6.0.3 or higher is recommended for this software."
I just installed Final Cut Pro 7 yesterday.
... what gives? Do I even need this update to be able to manage the videos from my PMW EX1r? I was unable to use them in final cut pro when I tried earlier, and was led to that "Log and Transfer Plug-in" from Sony and told it was the solution, which now won't allow me to even install it.

You have a number of options, make sure you have the latest Sony XDCAM EX Log and Transfer plug in (v1.2) also grab Sony's XDCAM Transfer (v2.12) which you can use instead of the aforementioned L&T plug in. Plus there is Sony's Clip Browser app (v2.6) for checksum validated offloading of the media from the camera/cards ... and now there is a brand new app called Sony XDCAM Browser (v1.0) which is designed to combine/consolidate the functions of the various utilities into one single handy dandy app. Unfortunately in this first release it has far inferior functionality as compared to what can be managed with the separate apps.
All of the above can be most easily downloaded (requires no registration) from Sony's Canadian website:
http://support.sonybiz.ca/esupport
Hope it helps
Andy
Andy

Log and Transfer uploading issues

When trying to transfer my footage in the 'Log and Transfer' window I am able to preview my footage, however when putting it into the import queue it simply pops up with a red circle and an exclamation mark in it... and when hovvering over it it says 'Error: No Data'.
However, for the past week or so I have been using log and transfer and it has worked perfectly fine, and now it has started to fail on me.
There is enough room on the hardrive, I have also read previous discussions which have been posted a few years ago trying to find out what the problem is, from doing this I have tried to change the sound to 'Plain stereo' and have cleaned the 'cache', yet the problem is still happening.
It is version 7.0.3.
Help please!

Ask your question on the Final Cut Studio forum.

Log and Transfer - Clip Sorting Issue

Hello. I have been using an AVCHD camera for some time now, and when I would use the Log And Transfer the clips would show up in the order they were recorded. I accidentally pressed a tab at the top to sort a different way, and now I can't get back to how it was. See http://dcdl.info/20100212171440.png for a screenshot. I know it has to do with how the clips are automatically named.
If anyone can help me with this, I'd really appreciate it. Thanks!

Just a thought!
Right-click on the "Name" field and check "Date Created" in the drop-down list. If you now sort using the Date Created column, will this reorder the clips as you want them? If not, are there any other options in the list that might?
Frank

Log and Transfer w/ Sony HVX - problems

I loaded the log and transfer window with all the footage and added it to queue. Once it was finished transferring every clip shot at 59.94 had a "half-circle" icon next to it, meaning some frames were not captured. Every clip is short about 16 frames.
But the stuff shot at 23.98 all came in fine and with the "full circle" icon.
Anyone seen this before?

I have resolved the issue. Let me explain what happened.
My 59.94 footage was being transfered to FCP as 23.98. Also, in the log and transfer window my clips had a "half-circle" next to them instead of the usual "full circle". The cause of this was in Preferences, the Remove Advance Pulldown and Duplicate Frames option was checked. After unchecking it, I retransfered the clips perfectly fine.

Unknown Error when I Logging and Transfer P2 Card files in FCP 6.0.6

I have been trying for the past two week to Log and Transfer P2 files to my external hardrive using FCP 6.0.6 unsuccessfully.
Originally I tried to Log and Transfer directly from the Panasonic HPX-170 in between my shooting. The first time it was a success but from then on I always get the same Unknown Error when attempting to transfer. When I encountered the Unknown Error during the second transfer I went on to create folders with the P2 contents on my external Hard Drive.
When I drag any of the P2 folder content on the Log and Transfer window I can see all the clips. I can successfully transfer small B-roll clips I have but any big size file (all my interviews) return an Unknown Error symbol at the end of the transfer. I believe this is probably why I didn't encounter any issues during my first time.
I tried deleting the preferences in FCP and then Logging and Transfer and it works if the systems settings are set for the Mac Pro but not for the external HD. The problem is I don't have enough space on my Mac. I have cleared 45GB of space but my P2 files total 54GB. I tried the same process with a Mac Power Book with FCP 5.1.4 and again in encounter the same problem.
The external HD is a 1TB Western Digital that I have used before with FCP for editing but never before with P2 files. Its in good working order and has 79GB free space remaining. Both the camera and the P2 cards (16GB and 4GB) are also performing as expected.
I would appreciate any suggestions.

#36 - One or More P2 files failed to import.
Shane's Stock Answer #36 - "One or more clips failed to import..."
Very often in the field with this camera the camera operator will delete clips from the P2 card that they just don't like. That is the beauty of this camera. But, the still for that video file (located in the CLIP folder in the CONTENTS folder)...the still that you see when you are in the P2 Import window...is not deleted. So you will see the image, and the name, but the video file would have been deleted.
What you can do it compare the file names in the VIDEO folder and CLIP folder and see if anything is missing. If something is, then you know what the problem is. You can then just import the rest a few at time, skipping that one.
ALSO...in the P2 Import window...in the P2 Browser, there is a little sprocket drop down menu. Click on that and choose PREFERENCES. Uncheck REMOVE PULLDOWN and then try importing again.
ALSO...make sure your file names aren't too long. Try shortening them and see if that works.
ALSO make sure that the folders that contain the CONTENTS folder doesn't have any odd characters like /!@#$%^&*()?.
Shane

FCP Crash when opening log and transfer with some AVCHD footage on a card

Hi,
I'm using a freshly (re)installed version of FCP 7 on a brand new macbookpro loaded with 8gb ram and equipped with a small 2ghz Intel Core i7
I get footage shot on Panasonic ag-hmr10 minicams coming on SD cards as AVCHD footage. Sometimes the files are quite big, 17gb of compressed footage.
When I go to log and transfer, to convert the footage in apple prores, the l/t window opens, I see a preview of my footage, than the spinning beach ball of death shows up and FCP crashes every time. I've tried deleting the preferences and reinstalling the software. Still, it keeps crashing. Now the same file on a different computer equipped with FCP will be processed, slowly but surely.
Now I know I can work around this problem by going to toast as an encoder, but I want to fix this issue so I can operate from FCP. I've seen this problem posted before but never found any good solution.
Any suggestions?

Have you tried setting the L&T AVCHD audio conversion prefs to plain stereo?
Open the L&T window.
Click on the gear icon towards the upper center of the frame.
Select "Plain Stereo" For the AVCHD plugin.
MtD

Log and Transfer issues

Similar Messages

Maybe you are looking for