Log and Transfer not working after reformatting computers

I have taught with FCP for years. This year, tech services reformatted my computers. Since they were formatted, Log and Transfer does not work with my Sony Handycam. A couple computers that have not been reformatted still Log and Transfer with no problems. The only difference I can find is that the newly formatted computers are running OSX 10.6.8. The computers that still Log and Transfer with no problems are running OSX 10.5.8.
I don't know if that is the problem, but would appreciate some direction here.

To cut unwanted parts off MTS files losslessly, try final mate for mac. That is the tool to help cut or trim MTS and still export MTS without any quality loss. Look through this blog to know how to make it done.

Similar Messages

LOG AND TRANSFER not working after upgrade ...?

Hi ..
I am running FCP 6.0.5
I am using Mac OSX 10.5.6
I've been using the 'log and transfer' window of FCP for the past few months without any trouble ... until today.
Every time i transfer the clips everything appears to go smoothly, but then when the 'transferred' clip is played back there is an odd 'jumping' or 'glitching' ... IE: the resulting footage is definitely NOT usable.
The only thing that i can think of that's changed is the fact that I upgraded the software last thursday and i probably hadn't transferred any footage since then. Is there an FCP conflict with the latest quicktime or Itunes upgrades?
I have tried re-transferring some clips from last week before the upgrade and the transfers now have the glitches.
I need this working as soon as possible! I have deadlines! Anyone who can help it would be greatly appreciated.

To cut unwanted parts off MTS files losslessly, try final mate for mac. That is the tool to help cut or trim MTS and still export MTS without any quality loss. Look through this blog to know how to make it done.

Log and Transfer not working at all

I'm really frustrated by the Log and Transfer procedure. Does it actually really work?
I have some HiDef video on an SD card, (no mixed media, just the video files) and the Log and Transfer option WILL NOT bring any of the files in. They are all AVI files, 720p, readable/playable by QuickTime, even readable and usable by FCE if I drag and drop each file, although to watch it without stuttering, I need to render it. The video is from a D-SLR (Pentax K-x to be exact)
But I want it in a native format so after it brings it in, I don't need to re-render it every time I move or trim it .0001 seconds in one direction.
When I try and do the Log and Transfer procedure, I get the error message that :
"xxxx contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media."
No support for 720p AVI files? Seriously? That just can't be right.
I have tried selecting the top level mounted object as well as selecting various directories drilling down into the card's data. Same error message every time.
I have also tried selecting various "Easy Setup" configurations. None made any difference what so ever.
The manual seems to suggest that you just select the media object and the magic happens. What the heck is going on? Any ideas?

Hi -
FCE currently supports 3 types of media directly:
!http://www.spotsbeforeyoureyes.com/FCEOpenTimeLine.jpg!
The latter two types, HDV and AVCHD it supports by converting the video format to Apple Intermediate Codec (AIC) during the ingestion process.
The video that your camera makes is none of those formats, so you will need to convert the video to a format that is usable in FCE natively. This is why you are unable to use Log and Transfer. In order to use Log and Transfer, you would need to have video that conforms to the AVCHD standard.
You can manually convert your video files by downloading MPEG Streamclip (free) from
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
and converting your video to AIC 720P.
Then use easy set up in FCE for HDV 720P and manually import your files by going to the menu File > Import, or simply dragging the files from the finder to your FCE browser.
You don't mention what frame rate you camera shoots at, but FCE only works with standard broadcast frame rates (29.97 fps), so it won't be able to use 24fps material.
You would need to use Final Cut Pro to natively support that.
Hope this helps.
MtD

Log and Transfer not working with Sony AVCHD camera

Hi, I have a new Sony AVCHD camera. The HDR-XR200 120GB hard drive model. It captures in 1920x1080i, and connects to Mac via USB.
FCP does not recognize the camera when I open the log and transfer window.
Can someone help me with seq setting and easy set up setting or other setting for it to work.
I am happy to import footage into FCP with AIC or prores 422. Just want to edit all the footage I have of my so's international soccer tournament held in Australia last week. I also have Final Cut Express on my Mac if that works better. This is very frustrating trying to get it to work.
Cheers
Bryan

I use a Panasonic AVCHD, which FCP doesn't recognise. Anyway I've spent months playing around because this little camera blows my Sony V1 out of the water in sheer quality.
Best thing is just get hold of a copy of Toast 10, you can then simply drag your .mts files into this and encode to whatever you want, I edit in pro res LT, but Toast will even encode it to HDV if you want to end up on tape(Even this result still blows the Sony HDV apart)
FCP is very fussy about even noticing the very existance of .mts files, so I wouldn't waste my time, scratching my head.
By the way, I use Firewire 800 drives, not USB 2 and also in the name of God BACK UP YOUR MTS FILES ON A NEW HARD DISC CALLED "BACKUP OF .MTS FILES!" LOL

Log and transfer not working with Sony NX5??

Hello to all knowledgeable Final Cut Pro users!
When I first got my Sony NX5 I would shoot and plug the SD card into my mac book pro, select log and transfer in Final Cut (6.0.6), and there the footage would be! And it would transfer and all was wonderful. On my most recent job I was alarmed to find no footage showing up in Final Cut and no apparent way to get it off the card through FCP. Ever since this stressful event I haven't been able to get the footage off my SD cards through FCP and I really need to start editing this footage by tomorrow! Sometimes it says error with the file structure and other times it says nothing and just won't open any files.
Does anyone have any idea what's going on? Why it would be working and then suddenly stop working? Any ideas how to fix it? I've seen a few people talking about having to download other programs but they seem to be hit and miss too.
Any advice will be much appreciated!
Thanks,
Maia

Hi Shane,
I'm having this same issue but I have 7.0.3. FCP keeps crashing when I try to open the PRIVATE folder into the L&T. I posted my case in another thread: https://discussions.apple.com/thread/3621089?tstart=0
Do you know why? Could you help me?
Thanks a lot,
Mar

Importing 60i footage using log and transfer, not working :(

Hi, when I import my 60 fps footage in to Final Cut Express using the log and transfer method (because the footage is AVCHD) it always changes the frame rate to 29.97 even if the frame rate is lower like 24 fps. I need this to be 60 frames per second because I'm working with a slow motion shot and need to get the most frames from the footage.

Thanks, David,
We had done all of those little tricks to no avail... but we did figure it out.
It turns out it was a corrupted sequence that was causing the problems.
Trashed the sequence, now everything's happy again.

Log and transfer not working

I am attempting to ingest footage from my SDHC cards that is in a .mov format. Nothing happens. When I attempt to select the path to the files I'm told it is an improper or unsupported format. Any suggestions?

Did you install the EOS Log and Transfer plugin? You must if you want FCP to work with Canon DSLR through log and transfer.
THis tutorial link has links to the Canon site. You have to choose your OS, and then it'll appear in a list.
Tapeless Workflow for FCP 7 Tutorial
Shane

Log & Transfer not working after latest update.

I updated Final Cut Pro 6 to the latest update available. Now when I try to log and transfer my DVCPRO-HD files I'm having errors. Some kind of blocks appear all over the video and the sound is fuzzy and goes in and out like the mic is turning on and off. It was working fine for a couple clips but then it started messing up. Any ideas? Is there a way to remove the latest update?

Thanks for your suggestion, it has solved my difficulty. For informational purposes I will publish my post and the solution in hopes it will assist others.
I am running Final Cut Pro 6.0.5. My Sony SR12's drive is recognized during the Log And Transfer process. The problems continue. All of the thumbnails have a grayish/brown band going right through the middle of each one. I am able to play the clip in the Log and Transfer window but as soon as I attempt to drag the clip to the media box, FCP crashes. I had this same problem with iMovie 7 and found that updating to the latest version solved the problem. In this case however, FCP 6.0.5 is the latest version. I have the same problem with Final Cut Pro Express 4.0.1 but again, not with iMovie 7.1.4. I loaded Sony’s XDCAM software as well just in case but it did not do anything to help the situation.
When I trashed the Perian component along with QuickTime preferences it did the trick. I believe it was the old version of Perian causing the conflict with Final Cut Pro’s Log and Transfer option, not the Quick Time preferences. When I installed the newest version of Perian which is 1.1.3 there didn’t seem to be any conflict and the HD clips from my Sony SR12 imported fine with no further crashes.
MacBook Pro 17" 2.33 GHz Intel Core 2 Duo
2 GB 667 MHz DDR2 SDRAM
Mac OS X 10.4.11
Final Cut Pro 6.0.5

[SOLVED] Xorg and keyboard not working after upgrade.

Hi guys,
after a `# pacman -Syyu` I got Xorg not starting and keyboard not working: I am unable to do anything.
I'm posting here pacman's log that I got by booting an Ubuntu Live CD: https://gist.github.com/anonymous/7517806
Any hint?
How do you recover a system once it's gone like this? Many thanks in advance.
J
Last edited by ifsixwasnine (2013-12-23 13:58:16)

WonderWoofy wrote:
I wouldn't necessarily call this [SOLVED]. At best I would probably mention that you found a workaround. The addition of '(downgrade)' likely makes it fine, but just FYI for future threads. There are two reasons for this. One, others who find this thread are likely to dig into it thinking there is a real solution, and two, if you mark it as [Solved] it might generate less attention, lessening the chances of you actually being helped to a real solution.
Just my 1.46¢
You're right, problem wasn't actually solved. In fact, yesterday I upgraded the whole system again and the same problem showed up, but I got it fixed.
Same scenario: after a boot (shorter than usual), what I had was a tty, but I noticed something that I hadn't noticed the last time: the prompt said "Arch Linux 3.11.[?]".
The kernel version was supposed to be 3.12.[?] so I started investigating and after several attempts, this is how I got the system working again:
1. Chrooted into the system
2. Wiped /boot
3. Re-installed grub
4. Re-installed linux kernel
5. Re-created grub.cfg
6. ???
7. Profit
I'm pretty sure that what originated the problem wasn't a "kernel issue" as I pointed out in my previous post, but it was an incorrect installation of grub: in fact, the grub prompt never showed up before yesterday, the system used to boot straight, ignoring the 5 seconds timeout.

Log and transfer not recognizing my p2 cards

I have been off my computer for a few weeks and I just went to upload data from my p2 cards and log and transfer will not recognize them. I copied the card contents with the text docs into folders on my desktop to do the transfer and the Log and Transfer still did not work.
Last time I had problems with this was a quicktime update, I have updated since and it worked fine until now. does anyone have any experience with this problem or have I just messed something up? I am running FCP 6.0.4.

Do you have FX Factory installed? Version 1 and 2...and the demos...interfere with import. Either remove it or update to 2.0.1 and that will fix it.
Shane

Log and transfer not changing frame rate to slow motion on P2 cards...

Hello.
I swear I have done this before on final cut studio 2 and it came out correctly, but for some reason this time, either myself or the computer is making an error. (chances are it's me).
Basically, I'm logging and transferring footage that was shot on P2 at 50 fps, and my intention is to import it at 23.98 fps. I thought this is something that naturally happens in the log and transfer process, but i guess not?
My project was set up via easy set up at panasonic dvcproHD frame rate 23.98... and I'm logging an d transferring directly into my browser but the f frame rate stays at 50 fps. (footage was shot in England to be incorporated into a video already shot in America).

I thought this is something that naturally happens in the log and transfer process, but i guess not?
Your guess is right...it DOES NOT slow it down upon injest. ONLY if you set the camera up to shoot 720p25 and then choose the 50 frame rate (I hear this is what you do...I am not a camera guy, so...), then it will import slowed down. But you have to set the camera up CORRECTLY. The first time I imported slow mo, it was 60p...and I had to use the Frame Rate Converter to slow the clips. Then my camera guy figured out the setting in camera and BOOM...there it was.
So...I guess you are NOT wrong...actually. It just needs to be set up IN CAMERA in order to do what you want.
and I don't know if the Frame Rate Converter works for PAL footage...stupid, but...no...Stupid.
Shane

Ipod classic will not restore and will not work after many attempts

I have purchased and replaced 3 ipod models, This is my third one (80GB ipod classic) and with out fail after 1 year and 2 months after buying it, it stopped syncing with my itunes and now after 5 attempts to restore it will not restore and will not work. I am sick of this and find it preposterous. What is wrong with ipods..? what is wrong with my recent one?

I have tried to restore via itunes and I still get the same message on the Ipod after many many restore attempts."Use iTunes to restore" with the picture of a plug on the screen and then it just shuts down. Exactly 1 year and 2 months after I purchased it as was the previous Ipod I had in 07.... what is going on?
Are ipods not made to work with both macs and pc's? it seems they just shut down after a while
what can I do?

Keyboard and touchpad not working after Windows 10 update

after udating windows 10 on my probook 4440s keyboard and touchpad not working. if i press a key for 10seconds the key then shows up in the screen. and touchpad is worst. it freezes all the time barely moves. but with usb mouse it works fine

It's known that installing Windows from an external DVD drive on a Mid 2013 MacBook Air causes that the keyboard doesn't work after finishing the installation. The fix is to install Windows by using a USB drive. See > http://support.apple.com/kb/TS4599

FCP Log and Transfer not Recognizing .MTS

This is weird. Two weeks ago I received a bunch of MTS files and brought them into FCP 6.0.6 with Log and Transfer. Today I received a bunch more and opened FCP to log and transfer the files and now FCP won't recognize them I haven't changed anything to my knowledge. Any more troubleshooting ideas? I have clipwrap and that works but I have an outdated version and I guess upgrades aren't free so I only have the free trial version. Anyways, log and transfer worked great and now this problem!?
Thanks in advance!
Tim

FCP can recognize MTS video files as long as you have the whole file structure.
AVCHD->BDAV->Stream and something like that.
If you indeed just have single MTS video file, you have to use a MTS Converting software.
Hope my info helps.

Ichat video not working after reformat

Thanks for coming here to help me on my problem guys. I am a PC user and my friend is an apple macbook owner. We always videochat with eachother over AIM. Tonight We were video chatting fine and my friend wanted to reformat his macbook. After he did that, he came back online onto ichat and now when he does a videochat request, it seems to load fine but his video is a black box and I cant hear him. He can however hear my mic. On his end he can see his own video fine and everything looks ok in the setup settings as well.
What setting is it that is causing this problem for us? I know his router settings are fine because its always worked. All he did was a reformat of his laptop that caused this situation, Im not an avid mac user though so Im not quite sure how to solve this one. I would imagine its not the port settings in the actual router though because like i said, it was working fine right before the reformat.
Thanks for the help guys. Hes done a system update so far and is 100% updated if that helps.

Hi,
Welcome to the  Discussions
Not sure why this got Bumped so quickly. It has not been more than 15 hours since you first posted. I post for about 3 hours each of my evenings 7.00pm to 10.00 Pm my local time. The first post was recorded at 05.46 (The discussion Software displays Local time to each logged in reader.)
Why on earth did he want to reformat ?
Creating a second Partition ?
iChat to AIM on a PC can be notoriously difficult to get sorted.
Often it either works or it does not despite any tweaking of settings.
If he wiped his drive and reinstalled the OS we cannot rule out the router but I will come back to that.
Tweaks/Settings.
A MacBook tells me he is most likely on Leopard (10.5.x) or Snow Leopard (10.6.x)
A) Firewall.
He should go to System Preferences > Security > Firewall
i) Leopard - He should use Allow All or Allow Specific apps and Add iChat to the List
ii) Snow Leopard - He should go to the Advanced Button in the same place as listed above and Allow Signed Apps and add iChat to the List.
iii) In either, Stealth should not be ON in the Advanced Button.
B) Internet speed
i) In Leopard go to System Preferences > Quicktime > Streaming and set the speed to 1.5Mbps T1/Intranet/LAN
Restart iChat if Open.
ii) The above setting does not exist in Snow Leopard.
iii) In either go to iChat menu > Preferences > Video Section and set the Bandwidth Limit to 500kbps as starting, test, point.
C) Router.
If he used Port Forwarding to Open the ports his device may well have wanted him to Point the ports to a Specific IP (Computer)
His computer may no longer have that IP as Reformatting makes it look like a new device.
If his device has it it would be better to use UPnP.
The fact his Preview does not resolve in to the Pic-in-Pic part and show you, plus the fact you see Black instead of video with associated Audio issues suggests a Speed issue (the Quicktime Setting in Leopard if set to Automatic is actually only 384kbps).
D) Updates.
IF he did an Archive and Install the process reinstalls the OS but leaves all the apps and personal stuff untouched (Settings are a choice along the way)
This means his iChat may not match his OS as it gets Updated in some of the OS Updates.
He should Update to either 10.5.8 Here --->> http://support.apple.com/kb/DL866
Or the 10..6.4 ---->>> Here http://support.apple.com/kb/DL1048
Everything else we know to try is in this Users Tip http://discussions.apple.com/thread.jspa?threadID=1968438 Listed above the Topics.
I notice you have managed a second Bump whilst I was typing.
This is a User to User Forum and no-one is here 24/7
8:49 PM Friday; September 24, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Log and Transfer not working after reformatting computers

Similar Messages

Maybe you are looking for