Log and transfer progressive files

Hi,
When I try to log and transfer clips shot in progressive HD (AVCD) there is no image in the log and transfer screen - it is all green, although I can hear the sound of the clip, when I play it.
It also gets transferred, but as I can't see the clip before transferring it, I can't make in and out points.
Very frustrating!

I believe the HMC151 is an AVCCAM and the PH mode you are shooting is not directly compatible with FCE. My understanding is that currently only FCPro can capture progressive from these cameras. There may be a workaround for FCE and perhaps Tom Wolsky will see your post here and can contribute an answer.
In the meantime, try shooting some 1080i50 in HA or HG mode and see if you can import that successfully using the AVCHD 1080i50 Easy Setup.

Similar Messages

  • Log and transfer MTS file and audio slip issues

    I'm having 3 issues with a  30 minute project in FCE HD.
    1. When I create clips in log and transfer, sometimes my footage chatters when I watch in in the viewer or place it on the timeline.  It didn't chatter in camera, I checked, and it doesn't chatter in log and transfer. I can re-cut the clip in log and transfer but I'm trying to save time!
    2. When creating a clip in log and transfer or just transferring a full clip, FCE trims the last 3 to 4 seconds off.  I need these 3 to 4 seconds!
    3.  When trimming and razoring a 9 minute+ clip on the timeline, the audio begins to slip and continues to slip the longer I trim.
    If anyone has answers to my three issues, please help.  This project is frustrating in content and now it's frustrating in editing!
    Thank you in advance for all your help!!

    Sorry it has taken so long for me to get back to you.  Again, thank you for taking the time to help me.
    Your first question, these clips came from my Panasonic HMC 150 camera.  I filmed at 24 fps. I downloaded the files from my SD card to my laptop, then use log and transfer to bring the clips into the project.
    FCE only offers 25 fps or 29.97 fps. So, there is a discrepancy there.  I'm not sure how to fix that when I want to stay with 24 fps.  Yes, I can film at other frame rates, I just prefer 24 for what I generally create.  Is there a plugin for more frame rate choices in FCE?  Or is that just available in FCP?
    Your second question, I always use insert.  I only use overwrite for my title cards. 
    And finally, your third, I am aware of the destination tabs.  I understand how they work.  My issue with having so many tracks is that I am working on a laptop without a mouse and sometimes when I move a clip the timeline jumps and creates the extra tracks when I place the clip.  I just need to be more careful when moving clips.
    Now, as to my final issue and that is the trimming of the clips through log and transfer.  FCE trims off the first and  last couple of seconds and will not allow me to bring them into the project.  Is this a setting problem or just inherent of FCE?
    I look forward to hearing from you!

  • Problems with the canon xf plugin for fcp 7 Can't log and transfer mxf files.

    Hi 
    I can't log & transfer mxf files from a c300 camera in FCP 7 even though I installed the xf plugin.
    When I looked at canon's website this link comes up but it doesn't work.
    http://usa.canon.com/nw3s/CanonUSA/DownloadContents/English/0200206002EN.htm
    Any suggestions?
    Or other plugins that might work?
    Thanks,
    James

    Hello jameskendi,
    The most obvious reason we can tell as to why this may not work properly is the version of FCP you are using.  You mention using FCP 7, although the plugin is specifically for FCP X.  This is why you're having such difficulty.  If possible, we'd recommend using an updated computer and or software to process these files. 
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Log and Transfer - Corrupt Files! please help.

    I received a P2 card, however only half of it will transfer. I am able to preview the other files on the card, however when i drag them to the transfer queue they wont transfer and i get an error with the red stop symbol.
    I think that the camera operator might have changed the recording setup in the camera from HD 720pn to HD 720p25 or HD 720p50 during shooting. Is there a way to save and transfer this media, and if so how?
    any help is greatly appreciated. thanks
    matt
    Message was edited by: fleischmac

    http://discussions.apple.com/thread.jspa?messageID=9274735#9274735

  • Log and Transfer .VOB Files and NO audio??

    I am trying to edit some footage that I did not shoot... The client gave me .vob files. I am able to look at them in FC, but there is no audio attached. The files do play with audio on Windows Media Player. There are also extensions for .iub and .bup on the flash stick... However I cannot detect a specific audio file.
    Also there is a timecode over all the video...
    My questions are:
    1. How can I link the video and audio? I can't even find an audio file...
    2. How do I remove the timecode
    3. Would it just be easier to attain the raw footage?
    Message was edited by: johnlll81
    Message was edited by: johnlll81

    You'd have to blow up the image...make it larger...until you didn't see the TC. And that will REALLY degrade your image. I mean, going beyond 20% is bad. And this is already a highly compressed format that you are going to convert to another highly compressed format. Won't be pretty.
    They contracted a company...paid them...and didn't get the masters? or they got TC dubs and didn't pay?
    Shane

  • Unknown Error when I Logging and Transfer P2 Card files in FCP 6.0.6

    I have been trying for the past two week to Log and Transfer P2 files to my external hardrive using FCP 6.0.6 unsuccessfully.
    Originally I tried to Log and Transfer directly from the Panasonic HPX-170 in between my shooting. The first time it was a success but from then on I always get the same Unknown Error when attempting to transfer. When I encountered the Unknown Error during the second transfer I went on to create folders with the P2 contents on my external Hard Drive.
    When I drag any of the P2 folder content on the Log and Transfer window I can see all the clips. I can successfully transfer small B-roll clips I have but any big size file (all my interviews) return an Unknown Error symbol at the end of the transfer. I believe this is probably why I didn't encounter any issues during my first time.
    I tried deleting the preferences in FCP and then Logging and Transfer and it works if the systems settings are set for the Mac Pro but not for the external HD. The problem is I don't have enough space on my Mac. I have cleared 45GB of space but my P2 files total 54GB. I tried the same process with a Mac Power Book with FCP 5.1.4 and again in encounter the same problem.
    The external HD is a 1TB Western Digital that I have used before with FCP for editing but never before with P2 files. Its in good working order and has 79GB free space remaining. Both the camera and the P2 cards (16GB and 4GB) are also performing as expected.
    I would appreciate any suggestions.

    #36 - One or More P2 files failed to import.
    Shane's Stock Answer #36 - "One or more clips failed to import..."
    Very often in the field with this camera the camera operator will delete clips from the P2 card that they just don't like. That is the beauty of this camera. But, the still for that video file (located in the CLIP folder in the CONTENTS folder)...the still that you see when you are in the P2 Import window...is not deleted. So you will see the image, and the name, but the video file would have been deleted.
    What you can do it compare the file names in the VIDEO folder and CLIP folder and see if anything is missing. If something is, then you know what the problem is. You can then just import the rest a few at time, skipping that one.
    ALSO...in the P2 Import window...in the P2 Browser, there is a little sprocket drop down menu. Click on that and choose PREFERENCES. Uncheck REMOVE PULLDOWN and then try importing again.
    ALSO...make sure your file names aren't too long. Try shortening them and see if that works.
    ALSO make sure that the folders that contain the CONTENTS folder doesn't have any odd characters like /!@#$%^&*()?.
    Shane

  • Final Cut Express Log and Transfer files not playing audio on another mac

    I recently purchased a new Mac Pro for video editing for work, and am having some issues with it. Previously i was working on a MacBook Pro running OS 10.4.11, on Final Cut Express 4.
    I used Log & Transfer to get the AVCHD videos from my Canon HF 11 onto my mac, and had no issues. Where my problems started was when I moved my video files to my new Mac Pro running OS 10.5.6. Now when I open those video files in either Quicktime or FCE, the VIDEO plays but _not the audio_. I thought maybe the video files were bad, but when I tried the original files on the new Mac, they still didn't work. I don't know if there's some codec that isn't on the new mac or if there's some other problem... I just know that my new amazing machine cannot play the files that my 3 year old one can. I'm not new to computers, but I'm not an Apple guru. Any help would be greatly appreciated!

    Well I can try trashing the files, but I can't log and transfer the files again, as it's months of footage that aren't on the camera anymore. But i did find something else out. The files that were recorded with the camera's built-in mic recording is fine and with sound, but the files that I used my wireless mic setup had no sound. I don't know why that is, because they worked fine on the MacBook Pro. I tried log and transferring a new clip on the Mac Pro wit;h footage using the wireless mic, and still no sound.

  • Log and transfer, my transfered files become very large...

    When I use Log and transfer, my files become very large. For instance, The card that I'm transferring from only holds 32G and after I transfer the footage to an external drive it has become around 70G. I checked the codec on transfered files and its showing apple pro res 422 1920 x 1080. Is there an import setting I'm missing? This is all new to me...

    This is normal.
    Your camera likely shoots AVCHD, a highly compressed version of MPEG 4.
    It is so compressed because it uses a "Long GOP" format where only every 15th frame is independent (i frame).
    Those in between only contain the differences to the prior i frame and cannot exist without it.
    (It's actually somewhat more complicated, but now you know what it is called, you can do more research)
    You need the ability to edit on any frame, however. The footage is transcoded to make every frame independent so you can do just that. It takes more space.

  • FCP Log and Transfer not Recognizing .MTS

    This is weird. Two weeks ago I received a bunch of MTS files and brought them into FCP 6.0.6 with Log and Transfer. Today I received a bunch more and opened FCP to log and transfer the files and now FCP won't recognize them I haven't changed anything to my knowledge. Any more troubleshooting ideas? I have clipwrap and that works but I have an outdated version and I guess upgrades aren't free so I only have the free trial version. Anyways, log and transfer worked great and now this problem!?
    Thanks in advance!
    Tim

    FCP can recognize MTS video files as long as you have the whole file structure.
    AVCHD->BDAV->Stream and something like that.
    If you indeed just have single MTS video file, you have to use a MTS Converting software.
    Hope my info helps.

  • Log and Transfer dropping or Off Lining Clips!

    Folks, I need your help please.
    I'm trying to Log and Transfer AVCHD files from an external HD. There are 6 Chips in total.
    But when I Log and Transfer some Clips are not transferring over. EG. On 1 Chip there are 37 Clips. But only 28 were transferred. And there was no warning symbol indicating that the Clips were not transferred. It's only because I saw that there seemed to be far too few Clips in the Browser compared to the L&T window that I realised.
    I can then go back and transfer them again. Sometime the transfer works. Sometimes not.
    Another problem which I'm experiencing is that in the L&T process some Clips already transferred are randomly going off-line. But I can't go back and re-capture them - even though they are in the Capture folder.

    Things now are just going from bad to surreally bad!
    I deleted all the files from my Capture folder and started all over again.
    I have 6 Chips and have set a BIN for each Chip.
    I then Set Login BIN and Transfer the content of the Chip into the relevant BIN.
    At first all seems to go well.
    But then when I go into the BIN once all the AVCHD files have been Transferred to PR 422 LT all the Clips are muddled and jumbled up. EG I made sure that Chip 1 was Transferred fully and properly. But when I revisited it Clips 1 - 4 are nowhere to be found.
    Chip 5 when transferring shows all the Clips have been transferred (Blue Circle is filled in) but instead of there being the 17 Clips that should be there there are only 6
    What on earth am I doing wrong/is happening???

  • FCE Log and Transfer with Canon Vixia HF11

    I've recently upgraded FCE.  Before the upgrade I had no problems with log and transfer.  I have changed absolutely nothing on my camera or computer other than the upgrade.  Now when I try to log and transfer the files are in the window but I get a red icon that indicates they won't download.  Are there simple fixes here?  I don't understand most of the terminology used on these sites.  I just know that it worked before I upgraded and doesn't work now.  Thanks

    Go to the Log and Trnasfer window and find the Settings icon (a small gear wheel).
    Change the audio from Martix to Plain Stereo and try again.
    Al

  • P2 files don't display in Log and Transfer VIEWER FCP 6.0

    Hey,
    I'm trying to log a bunch of P2 clips in the P2 viewer and, while I can see a thumbnail of the clip in the left side of the screen, it won't show up in the viewer. If I hit play it appears to be progressing in the viewer, but no picture or audio shows. However it imports fine and the picture and audio is now there, but that doesn't help me actually log.
    I'm running 6.0.0 on X.4.10 with QuickTime 7.2.
    Ideas?
    Martin

    +Have you updated to the latest version of FCP?+
    No, I'm currently running 6.0 with QT 7.2 on OS 10.4.10. In searching the tech forums I'm finding a lot of people having problems with P2 and FCP 6.0.2 and QT 7.3 (which requires OS 10.4.11) so I've steered clear.
    +How have you copied the p2 volumes?+
    Yes. The P2 volumes have been copied to hard drives. I'm not anywhere near the P2 cards at this point.
    +Where are they located?+
    LaCie 500 drives
    +Did you write protect to the p2 card before copying?+
    You mean on the original P2 cards? I don't know, but the files have already successfully been copied to the current hard drives. I can convert them to QT's using Log and Transfer without any trouble. What I can't do is see them in the Log and Transfer viewer before I import. I'd like to be able to do that so I can break them down into more manageable QT files on transfer.
    Martin

  • I need to know best way to edit MXF files, with least rendering, is that converting the MXF or Log and Transfer? the end product is dvd, but I have lots and lots of these projects to do.

    I am about to comence my Edit, and was told of Mpeg Streamclip, however this doesn't seem to work with my Canon XF305 Clips, the reason I was told to use it was so I wouldn't have to Render in Final Cut Pro all the time.. I do have the Canon Disc with the Plug in Utility and the update from their site.
    Is it best to Convert these MXF files first and import them into FCP or use 'Log and Transfer', so far I am unable to do either!!
    The projects on the timeline will have introduction .Movs already on it as a Template to re-use again and again with the new Footage ( MXF Files ) to be added and edited with transitions etc..This process is repeated again and again but with different MXF clips each time.
      I am looking for the quickest and best way for workflow as there are 80 or more projects to do, each with 10 or so clips to be added to the timeline and Exported for DVD...Will I have to then Compress to fit onto DVD's??
    I know Streamclip is an Mepeg 2 app but I thought the Canon XF305 Shot as mpeg2....
    Is Log and Transfer my only Option?
    Basically I need to know the quickest for Render purposes, and of course, the best way so the files aren't so huge etc etc.
    Please, any suggestions would be greatly received....

    We only work with PR422 files in FC7.  We use Shane's workflow with all 5D & MXF footage.
    Make your life easier and stick to the ProRes family for your footage and edit sequences. Avoid H264 & convert any you have to ProRes.
    Unless you are considering Blu-Ray the only way to deliver video on a DVD is to convert it to SD.
    Depending on the length of your show you can make a Blu-Ray in Compressor but you have very limited authoring options when compared to DVD Studio Pro.
    Compressor can also convert your HD to SD mpg-2 & Ac3 files. The best results usually come from setting the frame controls in the mpg-2 setting of Compressor to best. Depending on the the length of the show and your Qmaster settings this can take quite a while.
    I personally find Compressor's HD to SD DVD conversion varies. Sometimes it is wonderful and sometimes not so much. I prefer the following as it is usually is faster and very consistent.
    Export a quicktime movie (not QT conversion) of your final sequence
    Import the exported HD file back into FC.
    Create a SD 16x9 sequence and then drop in the recently exported HD seq and render. Rendering the sequence basically has FC doing the HD to SD conversion. Export the SD sequence and then convert to mpg-2 & ac3 in Compressor. While this does take time I still find it faster than Compressor with Qmaster utilizing all cores.
    Another option is using jobs in Compressor
    http://pixelcorps.cachefly.net/macbreak-154-540p-h264.mov
    In this workflow you would have Compressor convert the HD file to SD and then through jobs convert the SD file to mpg2 & Ac3. 
    In theory the jobs version could be faster (based on a number of variables- length, Qmaster, etc) but I haven't had time to compare the two. 

  • I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer."  I have tried to update my settings, but this doesn't seem to work.  Any help would be much appreciated

    I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer."  I have tried to update my settings, but this doesn't seem to work.  Any help would be much appreciated

    Hard Drive:  The Hard Drive is on my camera (Sony Handycam)
    Just needed some info on what is going on with your particular system.
    Knowing the exact camera model will also assist us.
    If this camera is standard AVCHD you should be able to connect with USB to Mac with FCE open and use Log and Transfer without all the fiddling around converting etc.
    What FCE does during ingest is convert files to AIC. (Apple Intermediate Codec)
    FCE cannot read the individual files in the BDMV folder, that's why all the converting is required when you use that method.
    BTW: regards formatting drives/cards/memory on cameras; it is wise to use the actual device to format rather than a computer. This is a prime cause of read/write goof ups with solid state media. This applies to still or video cameras.
    Keeping the COMPLETE card/memory structure in tact is vital for successful transfers.
    Try here for some trouble shooting tips:
    https://discussions.apple.com/message/12682263#12682263
    Al

  • Not all files work in log and transfer

    Hoping maybe someone has found a fix to this issue...
    When editing an HDV project not all my .m2t files (all in the same folder) want to transfer using Log and Transfer.  Most of the files will transfer correctly but sometimes it skips a file and puts a red exclamation mark in the status.  Not sure why most files work and a few don't when they are all from the same folder and from the same shoot.  The files will open fine in other 3rd party apps so the files are ok.  
    Thanks in advance for any help!
    Mike

    Mike Cole1 wrote:
    Not sure why most files work and a few don't when they are all from the same folder and from the same shoot.  The files will open fine in other 3rd party apps so the files are ok.  
    FCP may be a bit more discriminating on the file structure or header integrity, dunno, never shot HDV myself but we've seen similar posts for years. Try copying the files to your drive first and then ingesting.
    Side note, ust because other apps can open the files doesn't mean they are intact or useable. You don't mention what these apps are but if you can export form them, do that and then ingest the new file which might have all of its glitches reparied to suit FCP.
    bogiesan

Maybe you are looking for