Log and Transfer: Red exclamation points are attacking our project!

We are shooting a documentary with a HVX and a Firestore in 720p/24p. Every shoot, we move the files from the Firestore to the hard drive. We then log and transfer off of the drive to a G-Raid scratch disk.
Up until the other day, we were having no problems "logging and transferring". For some reason, we are now able to play and label the clip, but when we go to "add clip to queue" a red exclamation point keeps coming up.
This is inclusive of old and new footage. I have tried to change the length of the file names as well as restart Final Cut as well as the drives.
I know you guys are much smarter than we are, so we are looking forward to your wisdom.

#36 - One or More P2 files failed to import.
Shane's Stock Answer #36 - "One or more clips failed to import..."
Very often in the field with this camera the camera operator will delete clips from the P2 card that they just don't like. That is the beauty of this camera. But, the still for that video file (located in the CLIP folder in the CONTENTS folder)...the still that you see when you are in the P2 Import window...is not deleted. So you will see the image, and the name, but the video file would have been deleted.
What you can do it compare the file names in the VIDEO folder and CLIP folder and see if anything is missing. If something is, then you know what the problem is. You can then just import the rest a few at time, skipping that one.
ALSO...in the P2 Import window...in the P2 Browser, there is a little sprocket drop down menu. Click on that and choose PREFERENCES. Uncheck REMOVE PULLDOWN and then try importing again.
ALSO...make sure your file names aren't too long. Try shortening them and see if that works.
Shane

Similar Messages

Final Cut Log and Transfer Red Exclamation Mark Error on Longer Clips

Hi Guys, I am getting the dreaded red exclamation error while importing from my Canon HF S100 into FCP 6.0.1 via Log and Transfer. I've had no problems with clips under 5 minutes they transfer over fine but clips longer than that will not transfer. Anyone else had this problem, any possible solutions?
Thanks

My scratch disk is an external WD drive. I never did format it.
Is there a way for me to break the clip into 3 or 4 parts and then import it to FCP directly without log and transfer?
Thanks.

When I send a text message I get a message saying message not sent and a red exclamation point... however with Siri I can send messages... any help would be great

When I try to send a text message I am told it couldn't be sent and get a red exclamation point. I am able to send text messages with Siri...
Help!!!
It is a new Iphone 4s... and it worked fine until a few days ago...

im using an iphone 5. and im getting this problem.

Creative Cloud Desktop on Mavericks logs out and has a red exclamation point.

I recently purchased a new MacBook Pro with OS Mavericks on it. Since then, I can log into Creative Cloud desktop with no issues and use the app. But once my laptop goes to sleep and I wake it up, I will have a red exclamation point on the icon in the menu bar. If I click on the icon in the menu bar it will tell me the problem is with apps and if I click on apps it will eventually update and the red exclamation point will go away. But sometimes, when I click on the creative cloud icon in the menu bar it will say there is a problem with the connection and allows me to retry which will eventually get me back in or sometimes it will have just logged me out and I have to log back in.
It never did this before, I was able to just log in once and it would always be logged in and no network problems.
Any ideas?
Thank you.

I had similiar problem and i just stopped using Creative Cloud desktop. There's lot of other issues with that application that cannot be fixed since July.
I doubt that this application was created by some who ever worked on Mac. That's why i would recommend patience and disabling launching at start.

I have a Nikon D7100 and am having trouble downloading jpegs to my iPad. I get a red exclamation point instead of the green check mark, they dow all show up as thumbnails but won't download

I'm having trouble downloading jpeg files from my Nikon D7100 to my 3rd gen iPad. I see them come up for download and select download and a red exclamation point shows up in the bottome RH corner of the thumbnail instead of the green check

Hey freelance698,
I was able to find two articles that might assist you in troubleshooting the issue:
iPad: Using the iPad Camera Connection Kit
http://support.apple.com/kb/HT4101
iPad: Using iPad Camera Connector with unsupported USB devices
http://support.apple.com/kb/HT4106
Hope that helps,
David

Log and Transfer Problems. Vixia HF10

If you have used this camera before. Yes the format is weird. Now I recently purchased Final Cut. And when I try to use Log and Transfer...It won't transfer. Like My Easy Setup is set to HD Apple Intermediate 1080i60.
But when I drag the video. It gives me a red exclamation. It's connected by a usb. But it does not have a firewire cable.
How do I get my Final Cut to transfer. It doesn't even start to transfer. It just shows the processing icon. and Then it goes to the red exclamation

Hi -
Verify that you are using FCE 4.0.1.
Connect the camera via the USB cable.
Open the Log and Transfer window.
Click on the little gear shaped icon towards the upper middle of the L&T window
!http://www.spotsbeforeyoureyes.com/L%26TPrefs.jpg!
Select Preferences from the drop down menu.
When the preference window opens, set the AVCHD Plug-In audio format to Plain Stereo.
!http://www.spotsbeforeyoureyes.com/L%26TPrefsToPlainStereo.jpg!
Now try connecting the camera and see if you can import your files via Log and Transfer.
If there are clips on the camera memory that are recorded with different settings, this can cause problems. The clips need to be all HD clips.
Hope this helps.

Crashing after Log and Transfer

I am experiencing a FCP crash after using Log and Transfer to import P2 files. The material is on an external FW800 drive. I go to Add Custom Path in the Log and Transfer dialog box, point the software to the CONTENTS folder of each captured P2 card, the list populates with the clips, I drag the files into the que, and they import as usual. All is well and good until I X out of Log and Transfer, and when I do that, FCP crashes. I have not experienced this when capturing directly from a camera. This has happened over and over since beginning this project, and we are still yet to get all the material into the machine for editing.
Also, in case it is pertinent, I am using a MacBook Pro 2.2 GHz Core i7 machine with 8GB RAM.
Any ideas or has anyone else experienced this? Thanks in advance!
-Van

First thing I'd try is trashing your preferences. Google preference manager from digital rebellion. It's a free download and in invaluable. It's so cool you'll WANT to pay for it. It allows you to store a good set of preferences, trash them when they get funky and then restore the good set, including all the cool stuff you created.
ANYWAY, I'm in the habit of saving every which way from Tuesday after something interesting has happened, like a capture or L&T. I know that's not a solution, but a best practice. hopefully a pref trash will set you right.

Log and Transfer not working after reformatting computers

I have taught with FCP for years. This year, tech services reformatted my computers. Since they were formatted, Log and Transfer does not work with my Sony Handycam. A couple computers that have not been reformatted still Log and Transfer with no problems. The only difference I can find is that the newly formatted computers are running OSX 10.6.8. The computers that still Log and Transfer with no problems are running OSX 10.5.8.
I don't know if that is the problem, but would appreciate some direction here.

To cut unwanted parts off MTS files losslessly, try final mate for mac. That is the tool to help cut or trim MTS and still export MTS without any quality loss. Look through this blog to know how to make it done.

P2 Log and Transfer Problem

I'm trying to import footage shot with these specs: (with FCP 7)
Panasonic P2
720p (960x720)
25 FPS
DVCPRO 720/25p codec
The clips open ok with log and transfer, but once they are transfered the footage has the following errors:
- Playback rate is wrong. Everything plays back at half speed.
- Audio drops out at exactly 2 seconds and 9 frames on every clip.
I tested a clip shot on the same camera in a different format (720/25PN camera native codec) and it transfered fine. No problems at all.
The error only happens with footage shot in 720/25P (DVCPRO).
Does anyone know what is going on with this?
Thanks

In the P2 Browser, there is a little sprocket drop down menu. Click on that and choose PREFERENCES. Uncheck REMOVE PULLDOWN and then try importing again.
Shane

Log and transfer MTS file and audio slip issues

I'm having 3 issues with a 30 minute project in FCE HD.
1. When I create clips in log and transfer, sometimes my footage chatters when I watch in in the viewer or place it on the timeline. It didn't chatter in camera, I checked, and it doesn't chatter in log and transfer. I can re-cut the clip in log and transfer but I'm trying to save time!
2. When creating a clip in log and transfer or just transferring a full clip, FCE trims the last 3 to 4 seconds off. I need these 3 to 4 seconds!
3. When trimming and razoring a 9 minute+ clip on the timeline, the audio begins to slip and continues to slip the longer I trim.
If anyone has answers to my three issues, please help. This project is frustrating in content and now it's frustrating in editing!
Thank you in advance for all your help!!

Sorry it has taken so long for me to get back to you. Again, thank you for taking the time to help me.
Your first question, these clips came from my Panasonic HMC 150 camera. I filmed at 24 fps. I downloaded the files from my SD card to my laptop, then use log and transfer to bring the clips into the project.
FCE only offers 25 fps or 29.97 fps. So, there is a discrepancy there. I'm not sure how to fix that when I want to stay with 24 fps. Yes, I can film at other frame rates, I just prefer 24 for what I generally create. Is there a plugin for more frame rate choices in FCE? Or is that just available in FCP?
Your second question, I always use insert. I only use overwrite for my title cards.
And finally, your third, I am aware of the destination tabs. I understand how they work. My issue with having so many tracks is that I am working on a laptop without a mouse and sometimes when I move a clip the timeline jumps and creates the extra tracks when I place the clip. I just need to be more careful when moving clips.
Now, as to my final issue and that is the trimming of the clips through log and transfer. FCE trims off the first and last couple of seconds and will not allow me to bring them into the project. Is this a setting problem or just inherent of FCE?
I look forward to hearing from you!

HT201408 My iPad version 6.1.3 will not import Nikon RAW (.NEF) files. Can anyone tell me why I just get red exclamation points and no imports? Discussion areas indicate that RAW files can be imported.

I am unable to import RAW Nikon (.NEF) files into my iPad version 6.1.3. Can anyone explain to me how to import RAW files? I continually get a red exclamation point with RAW files while jpegs have no problem. Other discussions indicate that RAW files can be imported. Many thanks for yur help.

D40X support should be available in ACR 4.1. Availability should be by the end of the week, according to dpreview. See
http://www.dpreview.com/news/0705/07052901adobecameraraw41.asp
John

Log and Transfer Problem - Red Exclamation Stop Sign

I cannot log and transfer any of my files from a Panasonic HD camera P2 card. I checked the other posts about this and tried most of the solutions. The one thing I noticed is that my external hard drive (which is usb) is formatted for Windows NT but it has worked fine for several months until last week. Any suggestions will be greatly appreciated!

Shane,
I found one locally but wanted to see what you think. It is a
Western Digital My Book Studio LX 2 TB FireWire 800/USB 2.0 Desktop External Hard Drive (Aluminum)
Here's a link: http://www.amazon.com/Western-Digital-FireWire-External-Aluminum/dp/B003IT6XDI/r ef=sr_1_3?ie=UTF8&qid=1307482250&sr=8-3
Will this work? It does spin at 7200rpms.

Trouble with RED Log and Transfer in FCP6

Hi there,
I am cutting my first RED feature and am having an issue getting all my footage into FCP 6. I decided to go with the RED Quicktime files and am Log and transferring them in as we speak. Most of the footage was able to be dropped right in with no problem what so ever but I am on the last 1TB hard drive and it won't mount the folders to transfer the footage except one. One folder when in fine but the rest won't even mount. I tried importing each .RDC folder in on its own but I get an error:
WARNING
"A008c001_0212LV001.R3D" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media.
Obviously these files are put together the same way as the other couple hundred files but these ones are giving me trouble. Has anyone else ran into this problem and how do I get the footage in.
By the way I can open the .R3D files in Red alert without any problem
Thanks,
~Jake

A while has passed, unfortunately. I've been working my way through this mess, as well.
When you get the "unsupported media or has an invalid directory structure" message it usually indicates that a catalog-like file is missing. The same now happens with P2 transfer.
Check for an ".rsx" file within the RDC folder. Log and Transfer may not be happy if this file is missing. Sometimes it gets missed when the media is being consolidated across drives.
** What I'm having trouble with now is that Log and Transfer repeatedly fails to load a selected directory --- except on the umpteenth attempt. You know, the one where I'm beyond the point that most normal people are up the Bell Tower sniping at the citizenry.
jPo
Message was edited by: JP Owens

Log & Transfer red exclamation mark...HELP!!!

Hey guys, I have a shoot on Monday and for some reason my system is not allowing me to import p2 data. In the log and transfer window, i can view the clips (Scroll back and forth and what not) but when i select any and 'add to queue' the ball spins for a bit. Then it just stops and gives me a red exclamation mark. Any ideas What am i doing wrong? I have imported p2 before. Thanks!
Rhyno

Well then, if it works on one machine, but not this one, then something on this machine is causing it not to work. What that is, I cannot tell you. It can be any NUMBER of things. Some small application or plugin can be causing this. Finding out what that is could mean reformatting the drive, installing the OS clean, installing a fresh install of FCP, and then seeing if it works. Then installing all the other plugins and applications one at a time, testing import as you go along, until you can't import anymore...then you know what the cause is.
Shane

Just got a new iPad but can't get it to do the text messaging. Every time I put in a "To" address it shows a red exclamation point and says the name/number is not registered. How do I register the people I want to text?

I just bought a new iPad and can't get the text messaging to work. When I try to address the message a red exclamation point appears and says the person is not registered. How do I register them? They are already in my contacts list & they all are active in my iPhone text messaging.

Please Get the iPad User Manual for iOS 5.

Log and Transfer: Red exclamation points are attacking our project!

Similar Messages

Maybe you are looking for