Log and transfer stops for some reason

I just upgraded to FCE 4.0.1.
I am trying to Log and Transfer video that is AVCHD 720 30p.
I have FCE "easy setup" set to "HDV-Apple Intermediate Codec 720p30". I assume this is correct?
When I select a clip in Log And Transfer, put my in and out points, and choose "add clip to cue", the cued clip begins transferring and exactly 10 seconds later it just stops. I tried to start over with a new project and it keeps happening. Log and Transfer just stops. No injesting.
And there are no clips showing up on my scratch disk.
Help?

The AVCHD 720 30p was the camera info I was given.
I can't open the .MTS files with Quicktime or mpeg StreamClip so I'm unable to get any info from them.
When I select "get info" on the .MTS files (in a folder called "Stream", the attached screenshot shows this:

Similar Messages

Recently changed my apple ID, both email and password. For some reason icloud is on the old email account and i do not remeber that password to log out and login with new credentials

I recently changed my apple ID, both email and password. For some reason icloud is on the old email account and i do not remember that password to log out and login with new credentials.

I have the EXACT SAME PROBLEM and have been researching the past 2 hours!!!! Aaargh!

So here's my problem. I just used the "reset all settings" option, and accidentaly restored an old backup. It deleted all my photos and contacts, but for some reason I still have all the apps from after the backup date, is there a way to get it all back?

So here's my problem. I just used the "reset all settings" option, and accidentaly restored an old backup. It deleted all my photos and contacts, but for some reason I still have all the apps from after the backup date,and it also kept the notes from after the backup. The "reset all settings" option clearly says no loss of data or media, so I don't understand why some stuff got deleted. My question is, is there a way to get it back?

If you still can find a recent backup listed in iTunes/Edit/Preferences/Devices, use this one to restore from.
If there are no recent backups listed, your data is gone. Only if you included the iTunes backup folder into your computer backup routine, you could be able to restore this folder and find one of your latest backups listed again.
iTunes: About iOS backups

When I go to my iTunes Store and download something, for some reason it's not letting me download app it's saying there's a billing issue, when I correct it, it's says contact iTunes/ support can someone please help me, I really want too listen to paying

When I go to my iTunes Store and download something, for some reason it's not letting me download app it's saying there's a billing issue, when I correct it, it's says contact iTunes/ support can someone please help me, I really want too listen to paying

You need to do as provided - contact iTunes Store support.
http://www.apple.com/emea/support/itunes/contact.html

Log and transfer error for large avchd file

The log and transfer proces for large (>15 min) avchd MTS files results in an error. The process is aborted and the destination prores 422 file disappears from the finder.
I shoot avchd MTS files with a Sony HXR NX5 onto SDHC 32Gb cards.
I copy the entire image to an attached disk.
In FCP6.0.6 I use log and transfer.
The process works flawlessly for smaller clips.
The longer clips fail.
During the process I see the creation of a ProRes 422 MOV file and its growth. Before completion it ends in an abort.
In the log and transfer dialog I get a red octangle sign with an exclamation mark. I am not able to get the details of the error.
Q: what should I do to be able to use my longer clips?
Coen Jeukens
the Netherlands

All disks, internal and external (hardwired) are macosextended.
Have reset all prefs. Currently rerunning an 19 min import (will take over an hour).
If that fails, I will resort to setting ins and outs.
Thinking out loud, my sony NX5 produces MTS files of max 2Gb. If the clip is longer, it is split over multiple files on the SDHC.
FCP seems to recognise this artificial split. In L&T it combines the split files into a single clip.
Q: could it be that L&T stumbles over this artificial split of a clip?
Coen

TS1292 Hi, can you please take a look at my account and why its asking me to contact support. I have my billing address correct and everything but for some reason its not letting me to authorize my transaction

Hi, can you please take a look at my account and why its asking me to contact support. I have my billing address correct and everything but for some reason its not letting me to authorize my transaction

We are all fellow users here and have no way of accessing your account information; iTunes Store employees do not participate in these forums. You will need to do what it says, contact iTunes Support. Go here:
http://www.apple.com/emea/support/itunes/contact.html
to contact the iTunes Store.
Regards.

One of my apps is "waiting" for an update. Its been "waiting" for 4 days. It wont delete (so I can re load it). Sadly its not in i tunes as I put it on after the last sync and it wont for some reason sync either. Any ideas?

One of my apps (actually on my daughters i phone 5) has been "waiting for 4 days to update. Rebooting doesnt cure it nor does trying to delete it - it wont delete. I have looked at her i tunes account but she hasnt sync that for ages and the actual app isnt in i tunes but just on the phone. For some reason the syncing isnt working either in realtion to this app. There is adeqaute memory - good strong wifi signal. Any ideas??

Download the app on iTunes under her account (you've already paid - you won't have to again), then sync the app across to the phone that way and it should clear it up.
It's possible the app is too large to do over the air and it started on wifi but wasn't able to continue and got corrupted.

I changed my I'd and password but for some reason it still shows my old ID and I can't access my app store. Please help

I changed my apple I'd and password because my old ID was not working, but for some reasons I can not get into my app store with the new ID and pass. Please help

Anybody can access the App Store - even without an Apple ID.
What are you saying? You cannot access your purchased apps with your new ID? If you are, that is the way that it works. If you set up a new Apple ID - you can't update the apps that you bought with the old ID. You have to continue to update the purchased apps with the old ID and password since purchases are always tied to the ID that made the purchases.
If you need to sign into your new ID you can do that in Settings>iTunes and App Stores>Apple ID. Tap th old ID and sign out then sign in with the new one.

HT201407 I am unable to activate my phone since putting in recovery and restoring it. Its still logged to prev owner for some reason. HELP

I am without a phone after restoring it. Apple told me in order to get rid of the previous owners link to this phone i had to put it in recovery mode and restore the phone. WellI've done that and now i get a message that says this iphone is currently linke to an apple id. Sign in with the apple id that was used to set up this phone. I cant sign in with that id as i dont have the username and password. I bought this phone second hand and now i cant even use it. Can anyone tell me how to activate it and or delete the previous owner?

wendelfromab wrote:
i get a message that says this iphone is currently linke to an apple id. Sign in with the apple id that was used to set up this phone.
That's a feature of iOS 7.0 Beta, which cannot be discussed here.
Can anyone tell me how to activate it and or delete the previous owner?
Without knowing the Apple ID & Password, you can't. There is no workaround.
Good luck.

Best Log and Transfer choices for transfering Panasonic P2 media?

I am working on a documentary in Final Cut Pro 7.0.3.
Most of the footage is 1080 24p EX-1 and it is being edited within a ProRes422 timeline.
I have new interview footage, about 20 minutes shot with a Panasonic Varicam, and in the Log & Transfer window, under the P2 plug-in, it gives me various choices:
Native AVC Intra
DVCPRO HD
the flavors of ProRes including 422 standard, which is what my editing timeline currently is...
Are there any quality advantages by importing it natively (AVC Intra) and editing it within a ProRes TL? Or should I just import the Panasonic footage using ProRes 422 in L&T so it's a perfect match for my timeline?
Thanks for any advice on what offers the best possible quality...John

Did you shoot AVCIntra? Then bring it in as ProRes. Bringing it in NATIVE is faster, but there are no sequence settings for that format, so you'll always be rendering. And DVCPRO HD is 8-bit and anamorphic, so you'll be losing quality.
Just use ProRes 422.
Shane

I should be elite but my status isn't and I autoredeemed a $35 cert and lost it for some reason.

Is there any reason why this happened or should I wait till after the Black Friday chaos to get it fixed or will it be fixed after it.

Hi EM12,
I hope you had a Happy Thanksgiving.
Once you have spent the $1500 on eligible Best Buy purchases that is required to reach Elite status, your My Best Buy™ status should be upgraded within about 20 days. I looked over your account using the email address you registered with the forum, and it does appear that you should qualify for Elite status; however, it may be a couple weeks before your status is officially upgraded.
You should be able to view your $35 certificate by logging into your My Best Buy™ account on BestBuy.com. To ensure that you are able to view that certificate and to see if I can help answer any other questions you may have, I will be sending you a private message. You can check your private messages by logging into the forum and clicking on the little yellow envelope at the top of the page.
My Best Buy™ - Program Terms
Thank you for posting to the forum and for being a My Best Buy™ member!
Derek|Social Media Specialist | Best Buy® Corporate
Private Message

My laptop died last night and the date and time was set for 1/1/2000. I went to change the date and time and cannot. For some reason when i pull up system preferences it will not load date and time but will load other stuff. Please help.

Last night my laptop died and the time and date was reset. I cannot acess date and time preferences to change it and my laptop is acting really weird. My CD drive is broken so there are no options to put in a cd. Please someone help i need my laptop for school and cannot afford another.

Many system actions will misbehave, given an inaccurate date. Resetting the NVRAM and / or SMC will not fix it, and if the system has a preposterous date you may not be able to open System Preferences to correct it. This dilemma may or may not be addressed in a future OS X update.
If you cannot open System Preferences you can reset your system date and time using Terminal.
Please read everything that follows before proceeding. Write them down if necessary because the effects of setting a preposterous system date are unpredictable.
Quit System Preferences, force quit if necessary: OS X: How to quit an unresponsive application using Force Quit
Open Terminal - it is in your Utilities folder and looks like this
You can find Terminal by using the Finder's Go menu and choosing Utilities, then double-click the Terminal icon.
At the prompt, you will be typing a command resembling the following:
sudo date mmddhhnnyyyy
... but you must substitute the actual date and time in the command that corresponds to the date format used for your location. In other words if your custom is to use a date like 8 February 2014 then reverse the mm and dd values.
Substitute numerals in the above command according to the following:
mm = month
dd = date
hh = hour (24 hour format)
nn = minutes past the hour
yyyy = year
Each of those values must be two digits except for the year which can be two or four digits. As an example if the current date and time is February 8, 2014 at 9 PM your command will be the following:
sudo date 020821002014
or
sudo date 0208210014
Either one will work. If you enter nonsensical values the system will attempt to parse the entry correctly.
To recover from your inability to use System Preferences to set the date and time, the value entered does not have to be precise, it just has to be approximate.
Enter that command using the actual time and date for your location and in the appropriate format, then press the Return key. Terminal will ask for your Admin Password - the same one you use when you log in to your Mac. Type it and then press the Return key. What you type will not appear, not even with •••• characters.
To determine if your change was effective just type the date command and press the Return key. Terminal will reply with the date and time. If it appears correct and in the correct format, you should be able to open System Preferences > Date & Time once again. Selecting the "Set time and date automatically" and choosing an appropriate time server will adjust your Mac's system clock to the precise time.

My apple id is misspelled in the App Store and I'm for some reason not able to change it, what do I Do?

I'm using a macbook pro and its fairly new and when i put my email address into app store i forgot a letter and now i cannot download updates, help?

Apple ID security issues -
Call Apple Care for your country and ask for the Account Security Team. They can assist you with your issue.
http://support.apple.com/kb/HT5699

Is there a XDCAM log and transfer plugin for FC EXPRESS???

I am working on a project using Final Cut Express, but this time the material was shot with an XDCAM, so I received it in two SD HC memory sticks. I have a Sony multi-card reader. Is there a XDCAM plugin for FCExpress??? If not, is there a way to convert the files to use them without having to upgrade to FCP??? Help!!!
- Pekas

This may work:
http://www.calibratedsoftware.com/QXD.asp

Log and Transfer: Red exclamation points are attacking our project!

We are shooting a documentary with a HVX and a Firestore in 720p/24p. Every shoot, we move the files from the Firestore to the hard drive. We then log and transfer off of the drive to a G-Raid scratch disk.
Up until the other day, we were having no problems "logging and transferring". For some reason, we are now able to play and label the clip, but when we go to "add clip to queue" a red exclamation point keeps coming up.
This is inclusive of old and new footage. I have tried to change the length of the file names as well as restart Final Cut as well as the drives.
I know you guys are much smarter than we are, so we are looking forward to your wisdom.

#36 - One or More P2 files failed to import.
Shane's Stock Answer #36 - "One or more clips failed to import..."
Very often in the field with this camera the camera operator will delete clips from the P2 card that they just don't like. That is the beauty of this camera. But, the still for that video file (located in the CLIP folder in the CONTENTS folder)...the still that you see when you are in the P2 Import window...is not deleted. So you will see the image, and the name, but the video file would have been deleted.
What you can do it compare the file names in the VIDEO folder and CLIP folder and see if anything is missing. If something is, then you know what the problem is. You can then just import the rest a few at time, skipping that one.
ALSO...in the P2 Import window...in the P2 Browser, there is a little sprocket drop down menu. Click on that and choose PREFERENCES. Uncheck REMOVE PULLDOWN and then try importing again.
ALSO...make sure your file names aren't too long. Try shortening them and see if that works.
Shane

Log and transfer stops for some reason

Similar Messages

Maybe you are looking for