Log and transform only transforms part of clips

Hey all,
maybe someone else has this issue. Working with RED footage but this has also happened with Canon EOS footage: Log and transfer on some clips only captures or transcodes part of the clip even though no in or out points were selected. I can't figure it out - seems to be a bug. I usually have to transcode it again and then it works. Big pain especially for longer files. Never know when it happens.
So - any help is appreciated.
Best
p.

This isn't normal behavior, so it isn't a bug. There is something up with your machine specifically. Try trashing prefs.
#44: FCP acting weird - Trash Prefs
Shane's Stock Answer #44: FCP acting weird or unusual. Just not like is normally should
If the program was working fine, and now isn't, or just isn't working the way it should, the first things to do are:
1) Trash your FCP preferences. Download the Preference Manager from Digital Rebellion: http://www.digitalrebellion.com/pref_man.htm
http://www.kenstone.net/fcphomepage/trashing_fcpprefs.html
2) Open the Disk Utility and Repair Permissions.
3) Shut down for 10 min. Go for a quick walk around the block and get SOME exercise today. Come back, turn on the computer and see how things are.
4) (optional) Do the Hokey Pokey and turn your self about. Results may vary.
Shane

Similar Messages

I am having trouble printing and am only getting part of the document which i have no margins set any help??

i am having trouble printing and am only getting part of the document i have no margins set any help??

What version of Pages?
What Printer?
If it is Pages '09, turn Comments off.
Peter

HT204370 i bought the harry potter bundle pack, and i tried to redownload it, and it only downloaded part 1, but not part 2

i bought the harry potter bundle pack, and i tried to redownload it, and it only downloaded part 1, but not part 2

Clear the contents of ...iTunes\iTunes Media\Download and try one more time.
If the problem recurs use the "report a problem" links in your account history and explain what has happened so far. There may be a problem with the source rather than your download of it.
tt2

Log and Transfer to get the latest clips only

I now have about 4 hours of video on my SR-12 120G hard drive. If I only want Log and Transfer to log the last hour, is there a way to do it? Now it logs ALL the disc, some 500 clips. I only want to transfer the last 25 or so for right now. Evertime I do a Log and Transfer it starts from Clip 1. Thanks.

I can transfer the 25 to FCE like you said, what I don't want to do is see the 500 clips in the transfer window. That probably take 5 minutes of more on my system to show up before I see the newest clips, and I only have 1/4 of the Sony HDD drive full. I would like to tell it to log only clips on a certain date, or range, and then let me pick and choose out of only those 25 the ones I want to transfer to the FCE project. Thanks.

Program monitor only showing part of clip.

Hi
My program monitor only shows part of a clip during playback, though output to an external monitor is fine. If I stop playback and click in the monitor window, the clip is displayed correctly, but reverts back to partial when playing back.
This started happening today after installing Matrox tools update to 5.1 and latest matrox effect patterns. Everything else is perfect inc source monitor.
Have tried may settings changes, new projects old projects, new clips etc etc but its the same every time. Any ideas what has gone wrong? Its been running perfect for last 4 years. Is it worth reinstalling CS5 and would I have to reinstall Matrox also?
Windows 7 system 64 bit; 2 x 2,66 quad xeon processors; 4Gb ram;
ATI 4670 512mb graphics card;
Prem Pro CS5
Matrox RT.X2
Many thanks

Hi
My program monitor only shows part of a clip during playback, though output to an external monitor is fine. If I stop playback and click in the monitor window, the clip is displayed correctly, but reverts back to partial when playing back.
This started happening today after installing Matrox tools update to 5.1 and latest matrox effect patterns. Everything else is perfect inc source monitor.
Have tried may settings changes, new projects old projects, new clips etc etc but its the same every time. Any ideas what has gone wrong? Its been running perfect for last 4 years. Is it worth reinstalling CS5 and would I have to reinstall Matrox also?
Windows 7 system 64 bit; 2 x 2,66 quad xeon processors; 4Gb ram;
ATI 4670 512mb graphics card;
Prem Pro CS5
Matrox RT.X2
Many thanks

Log and Transfer dropping or Off Lining Clips!

Folks, I need your help please.
I'm trying to Log and Transfer AVCHD files from an external HD. There are 6 Chips in total.
But when I Log and Transfer some Clips are not transferring over. EG. On 1 Chip there are 37 Clips. But only 28 were transferred. And there was no warning symbol indicating that the Clips were not transferred. It's only because I saw that there seemed to be far too few Clips in the Browser compared to the L&T window that I realised.
I can then go back and transfer them again. Sometime the transfer works. Sometimes not.
Another problem which I'm experiencing is that in the L&T process some Clips already transferred are randomly going off-line. But I can't go back and re-capture them - even though they are in the Capture folder.

Things now are just going from bad to surreally bad!
I deleted all the files from my Capture folder and started all over again.
I have 6 Chips and have set a BIN for each Chip.
I then Set Login BIN and Transfer the content of the Chip into the relevant BIN.
At first all seems to go well.
But then when I go into the BIN once all the AVCHD files have been Transferred to PR 422 LT all the Clips are muddled and jumbled up. EG I made sure that Chip 1 was Transferred fully and properly. But when I revisited it Clips 1 - 4 are nowhere to be found.
Chip 5 when transferring shows all the Clips have been transferred (Blue Circle is filled in) but instead of there being the 17 Clips that should be there there are only 6
What on earth am I doing wrong/is happening???

AVCHD log and transfer - Only from a camera?

I am thinking about upgrading my camera to a AVCHD camera. I saw on a post that you can only log and transfer AVCHD footage from the camera and not just the card attached via card reader. Can someone shed some light on this. I want to be able to shoot, transfer/backup onto an external HDD and then Log and Transfer from the drive. I want to keep the camera busy out in the field and not tied up on my desk.
Thanks community!
Brian

You may fing this helpful:
http://library.creativecow.net/articles/ross_shane/tapeless-workflow_fcp-7/video -tutorial
When using card readers make sure it supports the larger capacity cards or at least the size card you are using.
Al

Log and Transfer won't capture entire clip...

Hi there,
I'm trying to log and capture clips in FCP7 from and HVX200.
For some reason it doesn't capture the entire clip...the end gets cut off. I can see it in the log and transfer window, but when I transfer the clips, they become truncated.
Has anyone ever had this problem?
thanks!

Go into the Log and Transfer prefs...that little sprocket looking drop down menu. Choose PREFERENCES. Uncheck "REMOVE PULLDOWN."
Try again.

Start page starts correctly them elongates to the right of the screen and can only see part of the information displayed.

It means that I am unable to read all the information being displayed,such as my email,I cannot log onto it with the password as it is off the screen where the whole page as moved to the right of the,it appears to stretched.

This issue can be caused by the Babylon Toolbar 1.1.8 extension
See:
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

How to select and cut only foter part of a swf flash from template, or any zone all the movie.

I have a template with flash menu. I would like to keep the rest and to delete only some zones, those with menus. This is happent often to me, I know to edit the movie,text,pictures, but I fail to resize the movie only for the zone I need it and save it for all the lenght of the movie. Maybe somene can help me.
Thank you,
crossing

While I'm not sure about what you want to accomplish, I'll offer a couple of possible solutions.
1. If the items that you want to remove are on the timeline, and those items are in layers that contain no content that you want to keep, then you can just select those layers and delete them.
2. If you want to remove some items from the stage, but keep the original items for some later purpose, just copy the movie and then edit the copy as in item 1.
3. If you need to remove some items from stage and then resize the stage to compensate for the loss of these items, then you may have to move and/or resize some of the items in your movie. This may be as simple as using the "edit multiple frames" selection in the timeline, or it may be much more time consuming.

Web pages suddenly aren't printing correctly - thefont is very small and it only prints part of the info centered on the page -what can I do about this?

The printing on the page uses only about 1/6 to 1/8 of the width of the paper and is centered and only prints about 27 characters and in a very small font. Also some web pages won't print out any info at all except for header info at the top.

OMG, thank you! It worked. Here's what I did (I have a Mac):
File-> Page Setup...->
# Settings: <page attributes>
# Format for: I made sure my printer was selected.
# Paper size: I put <US Letter> or <borderless 8.5" x 11"> both work. This is where the settings had been off!
# Scale: I put <100%> - it had been at 500% which didn't help either.

Log and Transfer renaming my clips

Hello everyone,
I have a problem with FCE - I have been using the Log and Transfer function to acquire video clips from my Sony HD cacmorder without problem until, out of curiosity (always a bad move), I clicked the 'Revert to Original Metadata' option in the Log and Transfer window.
Now, everytime I acquire a video clip it no longer imports as the name originally in the camcorder (e.g. "Clip#150") and instead names it as the next available clip number, e.g. "Clip#188".
I can't get this changed back and it's frustrating.
Anyone else have this problem or know how to solve it?
Many thanks in advance.

I'd never set up that many clips to go by themselves but that's just me.
Comparing the length of the clips to find which are not being transferred is not right, you should be using a counter and custom names.
Umm, wait, Log and Transfer or Log and Capture?
I do not know that camera but the proper ingest method would be to copy the cards to yoru drive and ingest from the drive, not the camera cards.
This ensures lots of things but also properly sets up any soaned files.
Why a particular file does not come in from a card is often bad storage media. There may be absolutely nothing you can do about that.
Look up the camera model, see if ayone else has had similar issues. Wait a few hours to see if ayone who has more experience with those codecs than I can offer something more helpful.
bogiesan

Device not working with Log and Transfer in FCP

I am trying to get some footage off my camera into final cut pro, but Final Cut Pro does not recognise my device when I try to use Log & Transfer
The camera is question is a Cannon Legria FS20, here is a link
http://www.canon.co.uk/ForHome/Product_Finder/Camcorders/flash_memory/LEGRIAFS20/
I have looked around but can't seem to find any plug-ins to get it to work with Final Cut Pro, does anyone know any way I can get it to work with Log and Transfer
Upon inspecting the hard drive, it saves video files in .MOD format with an .MOI file (which i assume is a metadata file
How can I get it so that my device works with log and transfer?
Thanks

Hi -
I did a little Google searching for information on your camera and it appears that it is a Standard Definition Camera that records in the MPEG-2 format.
Log and Transfer only works with High Definition material.
You will need to convert your video clips into a format that will work with FCP.
I know nothing about working in PAL, but you want to download an free application called MPEG Streamclip from
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
This application will convert your MPEG-2 files into a format that you can use directly in FCP.
Once you have converted the files to Apple DV-PAL, with the correct frame rate (25fps?) and field dominance you can either simply drag the converted files into FCP or import them using File > Import.
Hope this helps.
MtD

Very very slow import using LOG and Transfer

I am using a CANON VIXAIA HF10.and the clips are importing very very slow. The max time on each clip is only 5 min or so. Is there a way to speed this up? Thanks.

Log and transfer only supports AVCHD. It does not support AVCHD Lite, nor will it work with Motion JPEG media. You could use third party software to convert it, or iMovie and then export a QuickTime movie from there in the correct codec and format.

Why does Final Cut Express 4 quit automatically when I open Log and Transfer window?

I'm using a Sony NXCAM and I am editing on a Mac OS X. The clips I have recorded are in MTS format so I understand I must use the Log and Transfer setting to import my clips. I plug the camera into my computer, go into Final Cut Express 4, turn the camera on, and then go into the Log and Transfer window. Once I open that, Final Cut quits and an error message pops up that reads, "Final Cut Express quit unexpectedly." Final Cut quits too fast for me to even click on anything in the Log and Transfer window. I really don't understand why it does this. The only thing I can think of why Final Cut is quitting is because I have over 100 clips on the camera, so maybe that is too much for Final Cut Express 4 to handle. However, I wouldn't think that would be the case. If anyone knows of anything I could do to fix this problem, then please send me a reply. I've looked around the internet to see if anyone else has had this problem, but I haven't found anything. Thank you, any responses will be greatly appreciated!
-Snowconedxx39

Shooted videos directly saved to the SD memory card is no problem, the log and transfer window immediately recognizes the sd card and I was able to convert the videos. I will check later today if this were 25p, 50i or 50p footages.
Strangely enough is that transferring the .mts files from the internal memory to the sd card (using the Mac finder, I don't know if it is possible within the camera itself) won’t help, the log and transfer window doesn't the recognizes the transferred files, strange!
I hope that this problem will not occur using Final Cut Pro X, which I will start using soon.
I'm curious what the exact problem will be.

Log and transform only transforms part of clips

Similar Messages

Maybe you are looking for