Log changes in /SAPAPO/MAT1 - Product

Hello,
anyone knows if there is a modification log for product master data in SCM for changes done in /SAPAPO/MAT1 - Product ?
We have CIF to create and update product master data from R3 to scm but we have field Forward Consumption Periodo changed and it is ok in R3 so It must have been changed directy in SCM.
Is there any way to see changes in this system?
Tkanks,
Teresa Lopes

Teresa,
It is possible - if change document logging is turned on.  In SCM, the system is delivered with the logging turned off.  You must explicitly turn it on in order to be able to review changes.
Product master changes can be reviewed in transaction /SAPAPO/PROD_CD_READ.  Do not leave product or location blank, use asterisk instead for 'wild card'.
If nothing is found, then logging is not turned on.  You can confirm by looking at table CDHDR, where the change data is stored.
To turn change recording 'on', IMG > APO > Master Data > Product > Activate change documents.
Best Regards,
DB49

Similar Messages

  • Difference between material(/SAPAPO/MAT1) & material(/SCWM/MAT1)

    Hi Experts,
    I am new to EWM  & I am confuse between Product(/SAPAPO/MAT1)
    & Product(/SCWM/MAT1) ?.
    Please anyone outline me some brief about above to product in EWM.
    Regards,
    Rock

    Hi Rock,
    In order for the Product to be relevant for the EWM system you need to maintain only the /SCWM/MAT1 - Maintain Warehouse Product transaction. There you will find the screen tabs that are relevant only for EWM. All the tabs that have the little hat came automatically from the CIF from the ECC system and all those that do not have the hat are the ones strictly relevant for the EWM system so these are the only ones that you need to maintain.
    As I mentioned earlier, the /SAPAPO/MAT1 - Maintain Product transaction is for APO and does not make a product relevant for the EWM Warehouse.
    All the best,
    Claudiu Maxim

  • Base UoM in /SAPAPO/MAT1

    Hi Folks,
    Is it possible to change the Base Uom in the /SAPAPO/MAT1?
    I have bussines requirements where the ECC (R/3) material has to be changed to diff base Uom (it is not used yet).
    now this chagnes will fo to APO through CIF but the CVC is created in APO and that's the reason it is failing in the CIF.
    my integration model fails and i can not chagne the Uom in /SAPAPO/MAT1.
    Is there anyway i can chagne the base Uom in APO.

    Charlie, I think the easiest way is to delete the material in APO and re-cif.
    /sapapo/mat1. Pull down menu Product > Flag for Deletion > Deletion Flag: Location Product.
    The pop-up will ask delete immediately yes/no, choose yes. Then re-cif from R/3.
    If you have dependent objects, like orders, transportation lanes, ppm/pds then you have to delete those too. From version 5.0 the wuf transaction helps identify these.
    Chris

  • /N/SAPAPO/MAT1 question

    Hello Guru,
    i have a question on tcode /N/SAPAPO/MAT1, in the extra tab we have a field (Dem Exclu. from SS) can anyone of you know what is the use of this field? can it affect the demand requirement planning in APO?

    Hi,
    Please follow below path to add/check custom fields in Product Master(MAT1).
    SPRO -> SAP SCM - Implementation Guide> Advanced Planning and Optimization>Master Data--> Maintain Freely-Definable Attributes
    AT*     --> /SAPAPO/MATLOC  (Extra Attribute section in EXtra Tab in MAT1)
    ATT*     --> /SAPAPO/MATKEY  (Additonal data section in Properties Tab in MAT1)
    ATTL*     --> /SAPAPO/LOC     (Addit.Tab in LOC3)
    Hope this info will help you.
    Thank you
    Satish Waghmare

  • DP cluster filed in transaction /SAPAPO/MAT1- Extras

    Hello Experts,
    Can you please let me know if the field DP cluster is a standard field in the transaction /sapapo/mat1 under Extras tab.
    Meaning Transaction : /sapapo/mat1
                  Tab : Extras/Extra attributes
                  field : DP cluster
    I would like to know if the field DP cluster is a standard field in the transaction /sapapo/mat1.
    Thanking you all for your support in advance,
    Warm Regards,
    gayatri.

    Hi Gayatri,
    The fields on the tab "extra" and standard but customised.
    Go to SPRO >
    SCM Basis
    Master Data
    Maintain Freely-Definable Attributes
    You can see some attribute for the product, the location and the prodcut location.
    From here you should see your DP cluster.
    For sure the field is not populated automatically, it is either populated manually or via enhancement. The later is more likely.
    I hope it helps
    Thanks and Regards
    Julien

  • COM - error Unknown in /sapapo/mat1 transaction

    Hi,
    I am using SCM 4.1 and LiveCache 7.5.0.
    In the transaction /sapapo/mat1 i select a product and its location.
    Then in the Extras Menu when i select Where-Used List, it shows the message "COM - error Unknown"
    COM - error Unknown
    Message no. /SAPAPO/OM001
    Diagnosis
    A COM routine has encountered a program error.
    System response
    The program will be terminated.
    Procedure
    Start the program again.
    If this message appears again, contact your system administration.
    Please help me on this.
    Regards,
    Chintan

    hi - try running the livecache consistency check (/n/sapapo/om17) for product-locations and correct any errors that may be detected and try again to use the where-used functionality.
    Regards
    Vinod

  • APO /SAPAPO/MAT1 Authorization with check based on SNP planner

    Hello,
    We want to maintain authorization profile enabling to have a filter on /SAPAPO/MAT1 based on the value of the SNP Planner.
    Standard transaction PFCG does not brings back the SNP Planner as being a checked object when using /SAPAPO/MAT1 in the menu
    So, I used transaction SU24 and changed the setting for /SAPAPO/MAT1 : I added the authorization object C_APO_PLNR SNP Planner with check indicator "Check" and proposal "YS" . The status is now green for this object but I do not have understood if I had also to maintain TSTCA column "status: check at transaction start". In any case, I did not found how to activate it.
    With this setting, I also competed with PFCG the required value for SNP Planner.
    Result: it does not work. Could some one help ?
    Regards,
    Christine

    Hi Christine
    Please check OSS Note 1464451 (Authorisations in APO Master Data). I dont think you can directly use SNP Planner as a basis for authorization without an enhancement.
    RIshi Menon

  • /SAPAPO/MAT1

    Hi Guys,
    I have product number with me , and now i want to see the location attached to it , but in /SAPAPO/MAT1 when i press F4 i am getting list of all , location so tell me how to check what are the locations aplicable to this product.
    Regards

    Hi ,
    Go by as suggested by senthil ,
    Enter transaction /sapapo/rrp3
    enter planning version as 000
    enter your *product number * and
    press F4 in llocation field it will show you the applicable location.
    If you havent find any , it means that your product is maintained globaly but not extended to any specific location
    Hope it helps you.
    Regards
    Ritesh

  • Support message and change requests only for production system

    Hi guys,
    I would like to connect the solman helpesk with CHARM ( CHARM is still running ).
    In CHARM I have to create a CR only for production system. ( don't know why - but works as designed).
    In SAP helpdesk I can create support messages for every kind of system type but if I want to connect both (HD and CR) , the source system (ibase component) of the issue will copied to the CR and runs in error because of the rule (only p-system) of CHARM.
    Of course I can change the ibase to production system manually in SDCR but it seems a very error-prone method.
    Now my question: is it possible to change the ibase component due to the creation of CR by copy rule or something like this?
    Kind regards
    Rayko

    Hi Rayko,
    We do not have this option.
    Once in ChaRM, we assume that the changes will always correct an issue in the PROD system.
    I would recommend to open the tickets directly with the PROD system IBase, once the issue is also happening there.
    Best Regards,
    Fernando

  • Log changes of Serial number change in sales order

    Hello Experts,
    The change documents does not log changes to serial number for an item.
    So far i found that there is standard change document object for sales order i.e. VERKBELEG
    Is there a way to add new table to existing object.
    Or how can i achieve this.
    Best Regards
    Rajat

    Hello Adriano
    Not fully sure about your requirement.
    But you can definitely assign Serial numbers to sales order items by selecting the item and  choosing  menu path Extras/Technical objects.
    Firstly you have to set up the Serial Number Profile ( T Code OIS2)  or use the standard delivered ones GG00/GG01. Both have the Serialization Procedure SDAU - Serial numbers in SD order and in case of GG00, the serial numbers are assigned automatically. I am not sure how automatic assignment works but you can test it. Of course, you need to specify the Profile  in the material master to use the functionality.
    Hope this helps.

  • Table for the report RPUAUD00  Logged Changes in Infotype data

    Hi
    I have a query with the program RPUAUD00 Logged changes in Infotype Data.  In which table stores the details of the program RPUAUD00.  for example in the 1st period there is a LWP record for the employee.  If in the 2nd period the LWP entered in 1st period has deleted, in the log the LWP displays for 1st period  new field contents, Action Indicator I.  The deleted information displayes in Old field contents with the Action Indicator D. We want to know in which table the LWP insert and LWP delete (d) details are stored.
    This information required to create a report for ESI.  In the report No of days (payroll processed for) has to mention.  To know the no of days need to access the report RPUAUD00.  From the RPUAUD00 the details of LWP insert and delete can be known.
    Request to help in solving the issue
    Thanks & Regards
    EKP Yadav

    Hello:
    Logged changes in Infotype Data are stored in cluster table PCL4 ID  LA and SA for employee and LB and SB for applicant. Maybe L is for longterm and S for shorterm
    Cheers.
    Antoine

  • Log change documents in EKPO

    Hi Experts,
    I wish to thank anybody replying this message first.
    I have some questions to be cleared, may be you can provide me some help.
    To log changes on specific fiekds from a custom table, one has to use SCDO to generate change object and fct modules.
    These fct modules shoudl be called from program to log changes in tables CHDR and CDPOS.
    In the process of modifying a PO (me22n), I have several additional custom fields added in SAP table EKPO. These fields are available in PO trhough a custom tab on PO screen. I want to log the changes on these custom fields. The data elements of these fields are checked within change document check box. I modify the PO on several fields including custom fields , examine the content of CHDR and CDPOS and then find out that changes are logged for SAP EKPO fields modified but not for the EKPO custom fields.
    So here is my question:
    Do I have to call the generated changed document fct modules from an user exit or BADI prior to saving to have  the log changes or SAP handle it automatically ? If Yes, then which user exit or BAdi should I use ?
    Thank you for your time
    Dean Q.

    I found that SAP log the changes aumatically
    Thank u all

  • Want to change BOM usage from production 1 to design 2

    Dear Experts ,
                               Is it possible to change BOM usage from production 1 to design 2 ? Any mass change T code ?
    Neal

    If I make BOM universal , I need to ,make alternative BOM as Engineering BOM will have several levels and production BOM has all the components and assy on single level .
    MRP might pick up wrong BOM .
    Is there any T.code by which we can make mass copy or change BOMs . AS in system there are many BOMs which needs to be copied as is with new usage .
    Neal

  • Function module to change price of uploaded product

    Hi Gurus,
    is there any function module to change price of uploaded product info in crm
    regards
    Naveen
    Edited by: Naveen Kumar on Feb 13, 2009 12:05 PM

    condition record can modify using FM 'CNFPR_RECORD_PUT'

  • Report for logged changes in infotype data

    Hi
    Can anybdy suggest me the steps for configuring  logged changes in inotype data.
    My client wants a report to view the changes in any infotype record, specially in 0008 and absences.
    Reagrds
    Waseem

    Hi
    I already config these table but it is not refelecting
    In table V_T585A
    maintain Transaction Class is A and maintained IT
    in table V_T585B
    Maintained field group 01
                     Field Name is * (for all)
    In tabel V_T585C
    Maintained Doc Field Gr. 01
                     Doc Type is S
                     SupFldGr. is blank
    After this run report RPUAUD00
    and TC S_AHR_61016360
    But nothing to display.
    Please Help me.
    Regards
    Waseem

Maybe you are looking for

  • PDF Exaprom, problem with multitext in one header

    Problem is,that according to my simply thiking when I connect two elements Append Text HF one by one serialy with some text in header, and in their properties I set alligment both of them at left- MIDDLE in my opinion it suppose to overwrite one text

  • Create a dir if there exists a file with the same name

    Hi.. I want to create a directory with file.mkdir(). But I recognize a problem when there is allready a File with the same name. Is there any solution to handle a dir and a file with the same name? eg: Dir "C:\Windows" and File "C:\Windows" wami

  • Sony EX3 into FCP

    I've got a docu to shoot. I'm using the Sony EX3. I'm trying to plan how many HD's I'll need to take with my on the trip. I've misplaced my converter app. What would I be looking at - shooting at full XDCAM HD422 1080p 24fps – in terms of gigawattage

  • I PAD 2 not switching on

    Purchased ipad two weeks ago ,,, no problems up until tonight when trying to switch it on. ipad 2 unresponsive, tried to unfreeze, just has loading logo turning around in centre of screen, when connect to charger ipad just makes bleeping sound every

  • Xp won't connect to wpa2-psk security enabled network

    I have 3 laptops, 2 with win 7 premium and 1 with xp home edition, the win 7's will connect to the internet fine...but the xp won't connect at all, now if I turn off the security xp will connect fine, can anyone tell me what my problem is please?  Th