Log Check please for Hack? port 631 listen
Hello.
Can you please take a look at my logs on terminal and console for a possible hack?
Concerns:
Port 123 and 631
Master listening
fe80::24d:71ff:f.123
fe80::1%lo0.123
and a wild looking var folder way below.
I'm going straight from Modem (not a router) to Ethernet to MBP. The "address" is my dynamic ip but what is the 127.0.0.1?
From console:
Jul 30 17:04:25 XXMacBook-Pro Firewall[60]: master is listening from 0.0.0.0:25 proto=6
From Terminal
$ netstat -an
Active Internet connections (including servers)
Proto Recv-Q Send-Q Local Address Foreign Address (state)
tcp4 0 0 address.53970 63.140.56.117.443 ESTABLISHED
tcp4 0 0 address.53969 63.140.56.117.443 ESTABLISHED
tcp4 0 0 address.53968 23.67.56.11.443 ESTABLISHED
tcp4 0 0 address.53967 23.67.56.11.443 ESTABLISHED
tcp4 0 0 address.53966 17.151.20.66.443 ESTABLISHED
tcp4 0 0 address.53965 17.151.20.66.443 ESTABLISHED
tcp4 0 0 address.53964 23.67.56.11.443 ESTABLISHED
tcp4 0 0 address.53963 23.67.56.11.443 ESTABLISHED
tcp4 0 0 address.53962 23.67.56.11.443 ESTABLISHED
tcp4 0 0 address.53961 23.67.56.11.443 ESTABLISHED
tcp4 0 0 address.53960 17.151.20.66.443 ESTABLISHED
tcp4 0 0 address.53958 17.151.20.66.443 ESTABLISHED
tcp4 0 0 address.53938 23.3.129.54.443 ESTABLISHED
tcp4 0 0 address.53937 23.3.129.54.443 ESTABLISHED
tcp4 0 0 address.53936 23.3.129.54.443 ESTABLISHED
tcp4 0 0 address.53935 63.140.56.117.443 ESTABLISHED
tcp4 0 0 address.53933 23.15.29.88.443 ESTABLISHED
tcp4 0 0 address.53929 23.3.129.54.443 ESTABLISHED
tcp4 0 0 address.53928 23.3.129.54.443 ESTABLISHED
tcp4 0 0 address.53927 23.3.129.54.443 ESTABLISHED
tcp4 0 0 address.53597 74.125.224.227.443 ESTABLISHED
tcp4 0 0 address.53596 173.194.79.125.5222 ESTABLISHED
tcp4 0 0 127.0.0.1.631 *.* LISTEN
tcp6 0 0 ::1.631 *.* LISTEN
udp4 0 0 *.* *.*
udp4 0 0 *.* *.*
udp4 0 0 address.123 *.*
udp6 0 0 *.61626 *.*
udp4 0 0 *.61626 *.*
udp6 0 0 *.49918 *.*
udp4 0 0 *.49918 *.*
udp6 0 0 *.64939 *.*
udp4 0 0 *.64939 *.*
udp6 0 0 *.61688 *.*
udp4 0 0 *.61688 *.*
udp6 0 0 *.53270 *.*
udp4 0 0 *.53270 *.*
udp6 0 0 *.60691 *.*
udp4 0 0 *.60691 *.*
udp6 0 0 *.49177 *.*
udp4 0 0 *.49177 *.*
udp6 0 0 *.63181 *.*
udp4 0 0 *.63181 *.*
udp6 0 0 *.53289 *.*
udp4 0 0 *.53289 *.*
udp6 0 0 *.51771 *.*
udp4 0 0 *.51771 *.*
udp6 0 0 *.63911 *.*
udp4 0 0 *.63911 *.*
udp6 0 0 *.54834 *.*
udp4 0 0 *.54834 *.*
udp6 0 0 fe80::24d:71ff:f.123 *.*
udp4 0 0 127.0.0.1.123 *.*
udp6 0 0 fe80::1%lo0.123 *.*
udp6 0 0 ::1.123 *.*
udp6 0 0 *.123 *.*
udp4 0 0 *.123 *.*
udp6 0 0 *.5353 *.*
udp4 0 0 *.5353 *.*
udp4 0 0 *.* *.*
udp4 0 0 *.* *.*
icm6 0 0 *.* *.*
Active LOCAL (UNIX) domain sockets
Address Type Recv-Q Send-Q Inode Conn Refs Nextref Addr
572c680 stream 0 0 0 5e3a830 0 0
5e3a830 stream 0 0 0 572c680 0 0
5e3b6d0 stream 0 0 0 8bed640 0 0
8bed640 stream 0 0 0 5e3b6d0 0 0
8bed400 stream 0 0 0 8bedeb0 0 0
8bedeb0 stream 0 0 0 8bed400 0 0
5e39990 stream 0 0 0 5e3a7a0 0 0
5e3a7a0 stream 0 0 0 5e39990 0 0
572c830 stream 0 0 0 5e3a0e0 0 0
5e3a0e0 stream 0 0 0 572c830 0 0
572c0e0 stream 0 0 0 5e3aa70 0 0 /var/run/mDNSResponder
5e3aa70 stream 0 0 0 572c0e0 0 0
5e39090 stream 0 0 0 8bed520 0 0 /var/tmp/launchd/sock
8bed520 stream 0 0 0 5e39090 0 0
572b510 stream 0 0 88f1378 0 0 0 /tmp/icssuis502
5e396c0 stream 0 0 0 5e39d80 0 0 /var/run/mDNSResponder
5e39d80 stream 0 0 0 5e396c0 0 0
5e39c60 stream 0 0 0 572c290 0 0
572c290 stream 0 0 0 5e39c60 0 0
5e39cf0 stream 0 0 0 5e3a4d0 0 0 /var/run/mDNSResponder
5e3a4d0 stream 0 0 0 5e39cf0 0 0
572c560 stream 0 0 0 572c3b0 0 0 /var/run/mDNSResponder
572c3b0 stream 0 0 0 572c560 0 0
8bedf40 stream 0 0 0 5e3a290 0 0
5e3a290 stream 0 0 0 8bedf40 0 0
572b990 stream 0 0 0 5e3af80 0 0
5e3af80 stream 0 0 0 572b990 0 0
572b630 stream 0 0 0 8bede20 0 0
8bede20 stream 0 0 0 572b630 0 0
5e3bac0 stream 0 0 8d004a0 0 0 0 /tmp/launch-rF6G5l/org.x:0
572b360 stream 0 0 8d005c8 0 0 0 /tmp/launch-WaecNF/Listeners
5e39fc0 stream 0 0 8d006f0 0 0 0 /tmp/launch-p8KKLE/Render
572b750 stream 0 0 8d008ac 0 0 0 /tmp/launchd-381.lNEoRR/sock
5e3b010 stream 0 0 0 5e3b760 0 0
5e3b760 stream 0 0 0 5e3b010 0 0
5e3bbe0 stream 0 0 0 5e3acb0 0 0 /var/run/mDNSResponder
5e3acb0 stream 0 0 0 5e3bbe0 0 0
5e3a680 stream 0 0 0 5e3a710 0 0 /var/run/mDNSResponder
5e3a710 stream 0 0 0 5e3a680 0 0
5e3b2e0 stream 0 0 0 5e3b0a0 0 0
5e3b0a0 stream 0 0 0 5e3b2e0 0 0
5e3b880 stream 0 0 0 5e3beb0 0 0
5e3beb0 stream 0 0 0 5e3b880 0 0
5e3b370 stream 0 0 0 5e3bd90 0 0
5e3bd90 stream 0 0 0 5e3b370 0 0
5e3b640 stream 0 0 0 572b900 0 0 /var/run/mDNSResponder
572b900 stream 0 0 0 5e3b640 0 0
572bd80 stream 0 0 0 572be10 0 0
572be10 stream 0 0 0 572bd80 0 0
572c7a0 stream 0 0 0 572b6c0 0 0
572b6c0 stream 0 0 0 572c7a0 0 0
572b000 stream 0 0 0 572b090 0 0
572b090 stream 0 0 0 572b000 0 0
572b240 stream 0 0 0 572b2d0 0 0
572b2d0 stream 0 0 0 572b240 0 0
572b7e0 stream 0 0 0 572b870 0 0
572b870 stream 0 0 0 572b7e0 0 0
572ba20 stream 0 0 0 572bab0 0 0
572bab0 stream 0 0 0 572ba20 0 0
572bfc0 stream 0 0 0 572c050 0 0
572c050 stream 0 0 0 572bfc0 0 0
572c440 stream 0 0 0 572c4d0 0 0
572c4d0 stream 0 0 0 572c440 0 0
572cb00 stream 0 0 5bae000 0 0 0 /var/run/pppconfd
572cc20 stream 0 0 0 572cd40 0 0
572cd40 stream 0 0 0 572cc20 0 0
572ce60 stream 0 0 0 572cef0 0 0
572cef0 stream 0 0 0 572ce60 0 0
572d010 stream 0 0 0 572cf80 0 0 /var/tmp/launchd/sock
572cf80 stream 0 0 0 572d010 0 0
572d0a0 stream 0 0 0 572d130 0 0
572d130 stream 0 0 0 572d0a0 0 0
572d250 stream 0 0 0 572d1c0 0 0 /var/tmp/launchd/sock
572d1c0 stream 0 0 0 572d250 0 0
572d370 stream 0 0 0 572d2e0 0 0
572d2e0 stream 0 0 0 572d370 0 0
572d490 stream 0 0 0 572d400 0 0
572d400 stream 0 0 0 572d490 0 0
572d5b0 stream 0 0 0 572d520 0 0
572d520 stream 0 0 0 572d5b0 0 0
572d6d0 stream 0 0 0 572d640 0 0
572d640 stream 0 0 0 572d6d0 0 0
572d760 stream 0 0 0 572d7f0 0 0
572d7f0 stream 0 0 0 572d760 0 0
572d9a0 stream 0 0 5925250 0 0 0 /var/tmp/launchd/sock
572da30 stream 0 0 5925378 0 0 0 /private/var/run/cupsd
572dac0 stream 0 0 5925534 0 0 0 /var/run/usbmuxd
572dbe0 stream 0 0 592565c 0 0 0 /var/run/asl_input
572dc70 stream 0 0 59256f0 0 0 0 /var/run/SCHelper
572dd00 stream 0 0 5925784 0 0 0 /var/run/vpncontrol.sock
572dd90 stream 0 0 5925818 0 0 0 /private/var/run/printtool
572de20 stream 0 0 59258ac 0 0 0 /var/run/portmap.socket
572df40 stream 0 0 5925940 0 0 0 /var/run/mDNSResponder
572deb0 stream 0 0 59259d4 0 0 0 /var/run/com.apple.ActivityMonitor.socket
5e39ea0 dgram 0 0 0 5e39a20 0 0
5e39a20 dgram 0 0 759dea4 0 5e39ea0 0 /var/folders/wX/wX+aHq1gHUybSex2BEi9cE+++TM/-Tmp-//com.apple.notify.1328.6
5e39750 dgram 0 0 0 8bedac0 8bedac0 0
8bedac0 dgram 0 0 0 5e39750 5e39750 0
5e3b5b0 dgram 0 0 0 5e3a950 5e3a950 0
5e3a950 dgram 0 0 0 5e3b5b0 5e3b5b0 0
5e3be20 dgram 0 0 0 5e3ab00 5e3ab00 0
5e3ab00 dgram 0 0 0 5e3be20 5e3be20 0
5e39870 dgram 0 0 0 5e39f30 5e39f30 0
5e39f30 dgram 0 0 0 5e39870 5e39870 0
5e3bb50 dgram 0 0 0 572c950 572c950 0
572c950 dgram 0 0 0 5e3bb50 5e3bb50 0
572c320 dgram 0 0 0 572b5a0 572b5a0 0
572b5a0 dgram 0 0 0 572c320 572c320 0
5e3b130 dgram 0 0 0 572b480 572b480 0
572b480 dgram 0 0 0 5e3b130 5e3b130 0
572ccb0 dgram 0 0 0 572cdd0 572cdd0 0
572cdd0 dgram 0 0 0 572ccb0 572ccb0 0
572db50 dgram 0 0 59255c8
The 107 series below I cannot get much information on iplookup. Does this look fishy?
I'm concerned and will obtain a router tomorrow.
cpe-75XXXX:~ XXX$ netstat
Active Internet connections
Proto Recv-Q Send-Q Local Address Foreign Address (state)
tcp4 0 0 cpe-75XXXX..57644 a23-15-31-144.de.http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57643 a23-15-31-144.de.http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57642 lax02s02-in-f7.1.https ESTABLISHED
tcp4 0 0 cpe-75XXXX..57638 a23-15-31-144.de.https ESTABLISHED
tcp4 0 0 cpe-75XXXX..57635 lax02s02-in-f7.1.https ESTABLISHED
tcp4 0 0 cpe-75XXXX..57632 pz-in-f95.1e100..http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57626 www-slb-10-12-pr.http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57601 www-slb-11-02-sn.https ESTABLISHED
tcp4 0 0 cpe-75XXXX..57600 www-slb-11-02-sn.https ESTABLISHED
tcp4 0 0 cpe-75XXXX..57591 a23-15-22-31.dep.https ESTABLISHED
tcp4 0 0 cpe-75XXXX..57584 a23-57-68-97.dep.https ESTABLISHED
tcp4 0 0 cpe-75XXXX..57580 a23-15-50-110.de.https ESTABLISHED
tcp4 0 0 cpe-75XXXX..57573 lax02s01-in-f27..https ESTABLISHED
tcp4 0 0 cpe-75XXXX..57567 a23-15-61-177.de.https ESTABLISHED
tcp4 0 0 cpe-75XXXX..57565 lax02s02-in-f27..https ESTABLISHED
tcp4 0 0 cpe-75XXXX..57564 a23-57-68-97.dep.https ESTABLISHED
tcp4 0 0 cpe-75XXXX..57557 lax04s08-in-f17..http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57556 lax02s02-in-f14..https ESTABLISHED
tcp4 0 0 cpe-75XXXX..57555 lax02s02-in-f29..https ESTABLISHED
tcp4 0 0 cpe-75XXXX..57553 lax04s09-in-f15..https ESTABLISHED
tcp4 0 0 cpe-75XXXX..57552 lax04s08-in-f25..https ESTABLISHED
tcp4 0 0 cpe-75XXXX..57551 lax04s09-in-f3.1.https ESTABLISHED
tcp4 0 0 cpe-75XXXX..57550 lax02s01-in-f11..https ESTABLISHED
tcp4 0 0 cpe-75XXXX..57549 107.14.32.193.http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57548 107.14.32.114.http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57547 107.14.32.114.http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57546 107.14.32.114.http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57545 107.14.32.114.http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57544 107.14.32.114.http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57543 107.14.32.114.http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57542 107.14.32.169.http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57531 107.14.32.146.http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57528 www-slb-11-02-sn.http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57523 107.14.32.169.http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57522 107.14.32.169.http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57521 107.14.32.169.http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57520 107.14.32.169.http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57519 107.14.32.169.http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57511 www-slb-11-02-sn.http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57503 107.14.32.161.http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57502 107.14.32.161.http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57501 107.14.32.171.http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57500 107.14.32.171.http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57499 107.14.32.171.http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57498 107.14.32.171.http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57497 107.14.32.171.http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57496 107.14.32.146.http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57495 a23-15-27-120.de.http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57494 107.14.32.146.http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57492 107.14.32.171.http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57491 107.14.32.169.http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57490 lax04s09-in-f7.1.http ESTABLISHED
tcp4 0 0 cpe-75XXXX..57353 lax02s01-in-f2.1.https ESTABLISHED
tcp4 0 0 cpe-75XXXX..57351 lax02s02-in-f19..https ESTABLISHED
tcp4 0 0 cpe-75XXXX..57099 lax04s09-in-f21..https ESTABLISHED
tcp4 0 0 cpe-75XXXX..56536 pz-in-f125.1e100.jabbe ESTABLISHED
udp6 0 0 XXXXmacboo.ntp *.*
udp4 0 0 cpe-75XXXX..ntp *.*
udp6 0 0 *.58638 *.*
udp4 0 0 *.58638 *.*
udp6 0 0 *.63753 *.*
udp4 0 0 *.63753 *.*
udp6 0 0 *.60170 *.*
udp4 0 0 *.60170 *.*
udp6 0 0 *.62593 *.*
udp4 0 0 *.62593 *.*
udp6 0 0 *.52454 *.*
udp4 0 0 *.52454 *.*
udp6 0 0 *.53270 *.*
udp4 0 0 *.53270 *.*
udp6 0 0 *.61135 *.*
udp4 0 0 *.61135 *.*
udp6 0 0 *.59742 *.*
udp4 0 0 *.59742 *.*
udp6 0 0 *.56550 *.*
udp4 0 0 *.56550 *.*
udp6 0 0 *.49688 *.*
udp4 0 0 *.49688 *.*
udp6 0 0 *.50984 *.*
udp4 0 0 *.50984 *.*
udp6 0 0 *.50663 *.*
udp4 0 0 *.50663 *.*
udp4 0 0 *.* *.*
udp4 0 0 *.* *.*
udp4 0 0 localhost.ntp *.*
udp6 0 0 localhost.ntp *.*
udp6 0 0 localhost.ntp *.*
udp6 0 0 *.ntp *.*
udp4 0 0 *.ntp *.*
udp6 0 0 *.mdns *.*
udp4 0 0 *.mdns *.*
udp4 0 0 *.* *.*
udp4 0 0 *.* *.*
icm6 0 0 *.* *.*
Active LOCAL (UNIX) domain sockets
Address Type Recv-Q Send-Q Inode Conn Refs Nextref Addr
5e3b6d0 stream 0 0 0 5e3ae60 0 0 /var/run/mDNSResponder
5e3ae60 stream 0 0 0 5e3b6d0 0 0
8bedeb0 stream 0 0 0 5e39750 0 0
5e39750 stream 0 0 0 8bedeb0 0 0
8bed910 stream 0 0 0 8bed9a0 0 0
8bed9a0 stream 0 0 0 8bed910 0 0
572d880 stream 0 0 0 572bea0 0 0 /var/tmp/launchd/sock
572bea0 stream 0 0 0 572d880 0 0
5e3a0e0 stream 0 0 0 572c680 0 0
572c680 stream 0 0 0 5e3a0e0 0 0
572bbd0 stream 0 0 0 5e3a170 0 0 /private/var/run/cupsd
5e3a170 stream 0 0 0 572bbd0 0 0
5e397e0 stream 0 0 0 572b3f0 0 0 /var/run/mDNSResponder
572b3f0 stream 0 0 0 5e397e0 0 0
5e3a7a0 stream 0 0 0 5e39b40 0 0
5e39b40 stream 0 0 0 5e3a7a0 0 0
5e3bc70 stream 0 0 0 0 0 0
572c710 stream 0 0 0 0 0 0
572bc60 stream 0 0 6436534 0 0 0 /tmp/ics2716
572b1b0 stream 0 0 0 5e39990 0 0
5e39990 stream 0 0 0 572b1b0 0 0
8bedbe0 stream 0 0 0 8bed490 0 0 /var/run/mDNSResponder
8bed490 stream 0 0 0 8bedbe0 0 0
5e39900 stream 0 0 0 5e3a200 0 0
5e3a200 stream 0 0 0 5e39900 0 0
5e392d0 stream 0 0 0 5e3a560 0 0
5e3a560 stream 0 0 0 5e392d0 0 0
5e395a0 stream 0 0 0 572c5f0 0 0
572c5f0 stream 0 0 0 5e395a0 0 0
5e39000 stream 0 0 0 5e3a830 0 0
5e3a830 stream 0 0 0 5e39000 0 0
572c170 stream 0 0 0 5e3b9a0 0 0 /var/run/mDNSResponder
5e3b9a0 stream 730 0 0 572c170 0 0
5e3bf40 stream 0 0 0 5e3b7f0 0 0 /var/run/mDNSResponder
5e3b7f0 stream 0 0 0 5e3bf40 0 0
5e3b490 stream 0 0 0 0 0 0
5e39090 stream 0 0 0 8bed520 0 0 /var/tmp/launchd/sock
8bed520 stream 0 0 0 5e39090 0 0
572b510 stream 0 0 88f1378 0 0 0 /tmp/icssuis502
5e396c0 stream 0 0 0 5e39d80 0 0 /var/run/mDNSResponder
5e39d80 stream 0 0 0 5e396c0 0 0
5e39c60 stream 0 0 0 572c290 0 0
572c290 stream 0 0 0 5e39c60 0 0
5e39cf0 stream 0 0 0 5e3a4d0 0 0 /var/run/mDNSResponder
5e3a4d0 stream 0 0 0 5e39cf0 0 0
572c560 stream 0 0 0 572c3b0 0 0 /var/run/mDNSResponder
572c3b0 stream 0 0 0 572c560 0 0
8bedf40 stream 0 0 0 5e3a290 0 0
5e3a290 stream 0 0 0 8bedf40 0 0
572b990 stream 0 0 0 5e3af80 0 0
5e3af80 stream 0 0 0 572b990 0 0
572b630 stream 0 0 0 8bede20 0 0
8bede20 stream 0 0 0 572b630 0 0
5e3bac0 stream 0 0 8d004a0 0 0 0 /tmp/launch-rF6G5l/org.x:0
572b360 stream 0 0 8d005c8 0 0 0 /tmp/launch-WaecNF/Listeners
5e39fc0 stream 0 0 8d006f0 0 0 0 /tmp/launch-p8KKLE/Render
572b750 stream 0 0 8d008ac 0 0 0 /tmp/launchd-381.lNEoRR/sock
5e3b010 stream 0 0 0 5e3b760 0 0
5e3b760 stream 0 0 0 5e3b010 0 0
5e3bbe0 stream 0 0 0 5e3acb0 0 0 /var/run/mDNSResponder
5e3acb0 stream 0 0 0 5e3bbe0 0 0
5e3a680 stream 0 0 0 5e3a710 0 0 /var/run/mDNSResponder
5e3a710 stream 0 0 0 5e3a680 0 0
5e3b2e0 stream 0 0 0 5e3b0a0 0 0
5e3b0a0 stream 0 0 0 5e3b2e0 0 0
5e3b880 stream 0 0 0 5e3beb0 0 0
5e3beb0 stream 0 0 0 5e3b880 0 0
5e3b370 stream 0 0 0 5e3bd90 0 0
5e3bd90 stream 0 0 0 5e3b370 0 0
5e3b640 stream 0 0 0 572b900 0 0 /var/run/mDNSResponder
572b900 stream 0 0 0 5e3b640 0 0
572bd80 stream 0 0 0 572be10 0 0
572be10 stream 0 0 0 572bd80 0 0
572c7a0 stream 0 0 0 572b6c0 0 0
572b6c0 stream 0 0 0 572c7a0 0 0
572b000 stream 0 0 0 572b090 0 0
572b090 stream 0 0 0 572b000 0 0
572b240 stream 0 0 0 572b2d0 0 0
572b2d0 stream 0 0 0 572b240 0 0
572b7e0 stream 0 0 0 572b870 0 0
572b870 stream 0 0 0 572b7e0 0 0
572ba20 stream 0 0 0 572bab0 0 0
572bab0 stream 0 0 0 572ba20 0 0
572bfc0 stream 0 0 0 572c050 0 0
572c050 stream 0 0 0 572bfc0 0 0
572c440 stream 0 0 0 572c4d0 0 0
572c4d0 stream 0 0 0 572c440 0 0
572cb00 stream 0 0 5bae000 0 0 0 /var/run/pppconfd
572cc20 stream 0 0 0 572cd40 0 0
572cd40 stream 0 0 0 572cc20 0 0
572ce60 stream 0 0 0 572cef0 0 0
572cef0 stream 0 0 0 572ce60 0 0
572d010 stream 0 0 0 572cf80 0 0 /var/tmp/launchd/sock
572cf80 stream 0 0 0 572d010 0 0
572d0a0 stream 0 0 0 572d130 0 0
572d130 stream 0 0 0 572d0a0 0 0
572d250 stream 0 0 0 572d1c0 0 0 /var/tmp/launchd/sock
572d1c0 stream 0 0 0 572d250 0 0
572d370 stream 0 0 0 572d2e0 0 0
572d2e0 stream 0 0 0 572d370 0 0
572d490 stream 0 0 0 572d400 0 0
572d400 stream 0 0 0 572d490 0 0
572d5b0 stream 0 0 0 572d520 0 0
572d520 stream 0 0 0 572d5b0 0 0
572d6d0 stream 0 0 0 572d640 0 0
572d640 stream 0 0 0 572d6d0 0 0
572d760 stream 0 0 0 572d7f0 0 0
572d7f0 stream 0 0 0 572d760 0 0
572d9a0 stream 0 0 5925250 0 0 0 /var/tmp/launchd/sock
572da30 stream 0 0 5925378 0 0 0 /private/var/run/cupsd
572dac0 stream 0 0 5925534 0 0 0 /var/run/usbmuxd
572dbe0 stream 0 0 592565c 0 0 0 /var/run/asl_input
572dc70 stream 0 0 59256f0 0 0 0 /var/run/SCHelper
572dd00 stream 0 0 5925784 0 0 0 /var/run/vpncontrol.sock
572dd90 stream 0 0 5925818 0 0 0 /private/var/run/printtool
572de20 stream 0 0 59258ac 0 0 0 /var/run/portmap.socket
572df40 stream 0 0 5925940 0 0 0 /var/run/mDNSResponder
572deb0 stream 0 0 59259d4 0 0 0 /var/run/com.apple.ActivityMonitor.socket
8bedb50 dgram 0 0 0 5e39510 5e39510 0
5e39510 dgram 0 0 0 8bedb50 8bedb50 0
5e3bd00 dgram 0 0 0 8bed400 8bed400 0
8bed400 dgram 0 0 0 5e3bd00 5e3bd00 0
5e3b5b0 dgram 0 0 0 5e3a950 5e3a950 0
5e3a950 dgram 0 0 0 5e3b5b0 5e3b5b0 0
5e3be20 dgram 0 0 0 5e3ab00 5e3ab00 0
5e3ab00 dgram 0 0 0 5e3be20 5e3be20 0
5e39870 dgram 0 0 0 5e39f30 5e39f30 0
5e39f30 dgram 0 0 0 5e39870 5e39870 0
5e3bb50 dgram 0 0 0 572c950 572c950 0
572c950 dgram 0 0 0 5e3bb50 5e3bb50 0
572c320 dgram 0 0 0 572b5a0 572b5a0 0
572b5a0 dgram 0 0 0 572c320 572c320 0
5e3b130 dgram 0 0 0 572b480 572b480 0
572b480 dgram 0 0 0 5e3b130 5e3b130 0
572ccb0 dgram 0 0 0 572cdd0 572cdd0 0
572cdd0 dgram 0 0 0 572ccb0 572ccb0 0
572db50 dgram 0 0 59255c8 0 0 0 /var/run/syslog
Similar Messages
-
SMS_STATE_MIGRATION_POINT Health check failed for port 80 with status code 500
My SMS_STATE_MIGRATION_POINT gets a red cross because the health check of the SMS_STATE_MIGRATION_POINT is “sometimes” failing. I don’t understand why its fails sometimes? Any suggestions.
gr, Iwan
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 2:51:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 2:51:29 PM 22044 (0x561C)
Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 2:56:29 PM 22044 (0x561C)
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 2:56:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 2:56:29 PM 22044 (0x561C)
Checking store for cleanup of failed or stale state stores... SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
Call to HttpSendRequestSync failed for port 80 with status code 500, text: Internal Server Error SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
Health check request failed, status code is 500, 'Internal Server Error'. SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
STATMSG: ID=6207 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_STATE_MIGRATION_POINT" SYS=SWAMS0083 SITE=P01 PID=13560 TID=22044 GMTDATE=Thu Apr 15 13:01:29.777 2010 ISTR0="500" ISTR1="Internal Server Error" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 3:06:29 PM 22044 (0x561C)
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 3:06:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:06:29 PM 22044 (0x561C)
Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 3:11:29 PM 22044 (0x561C)
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 3:11:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:11:29 PM 22044 (0x561C)
Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 3:16:29 PM 22044 (0x561C)
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 3:16:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:16:29 PM 22044 (0x561C)
Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 3:21:29 PM 22044 (0x561C)
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 3:21:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:21:29 PM 22044 (0x561C)
Call to HttpSendRequestSync failed for port 80 with status code 500, text: Internal Server Error SMS_STATE_MIGRATION_POINT 4/15/2010 3:26:29 PM 22044 (0x561C)
Health check request failed, status code is 500, 'Internal Server Error'. SMS_STATE_MIGRATION_POINT 4/15/2010 3:26:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:26:29 PM 22044 (0x561C)I'va got the following event in my security event log this is strange because the Windows Firewall is off and the problem is not always there, 8 out 10 time the health checks passes.
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 4/15/2010 7:01:27 PM
Event ID: 5159
Task Category: Filtering Platform Connection
Level: Information
Keywords: Audit Failure
User: N/A
Computer: ********
Description:
The Windows Filtering Platform has blocked a bind to a local port.
Application Information:
Process ID: 13560
Application Name: \device\harddiskvolume2\programs (x86)\microsoft configuration manager\bin\i386\smsexec.exe
Network Information:
Source Address: 0.0.0.0
Source Port: 9000
Protocol: 17
Filter Information:
Filter Run-Time ID: 0
Layer Name: Resource Assignment
Layer Run-Time ID: 36 -
Could someone please check this for
Hi there!
I need someone to do this quick check, so I don't have to install Vista in vain.
I mainly use MIDI interface for compositions and playback. So, could anyone please find a MIDI file with some FASTER parts, play it, and check if there are any dropouts or note misplacements?
It was the issue in all previous driver versions, so please, somebody check this for me will ya?
I have X-Fi Extreme Music.
ThanksHere is the link to 2 faster midi files... If you have Windows Vista, X-fi and new drivers, please listen to them and tell me do they sound good or bad. Are there any dropouts, or any other issues?
http://www.box.net/shared/2vxsohpagv
Thanks. -
My Inspector for my house sent me his report via PDF that I had to access from an online link. I downloaded it but cannot forward it in an email to my insurance company who is requiring a copy. I get this error report every time:
Server Connection Error. Please verify that port 143 is available for connection on your machine or contact your administrator.
I have no idea what this means. Can someone help? I really don't want to have to print and scan this beast but I've been messing with this for 2 days now and am out of ideas.
Thanks!I'm having the same issue. Did you resolve it?
-
My iphone is stolen,but the email sent back didnt sent location of the iphone,would u please to check it for me.thanks
Just so you understand, this is not Apple. This is a user to user support forum. If you wish to contact Apple, you can do so here.
You can enable Lost Mode for the lost/stolen iPhone to access a array of features. If the iPhone is locatable when it is connected to the internet, then a location will appear on icloud.com/#find. For more information, visit here or contact Apple. -
Other ways to check for used port
Hi,
I have this code to check for used port :
try {
ServerSocket s = ServerSocketFactory.getDefault().createServerSocket(port);
s.close();
} catch (Throwable e1) {
InstallLogger.instance().info("Unable to open port " + port + ".\n" + e1.getMessage());
return false;
The code works fine. But in Windows 2003, it behaves differently. It does not detect that a "tomcat shutdown port" is already in use. Any other used port throws an exception, which is what is expected. Any idea will be appreciated. Thanks!below code loops till it gets a open port
private int port = 2562;
public void checkPort() {
try {
ServerSocket sock = new ServerSocket(port);
sock.close();
System.out.println(port + " port is open");
}catch(BindException b) {
System.out.println(port + " port is not available");
port++;
checkPort();//will check till it gets a open port.
catch (IOException e) {
//do other validations
} -
The new iTunes update gives me no option for a "share" tab on the side bar for me to play home shared music. why? please help i need to listen to beyonce!! plzzz
"share tab on the side bar ..."
iTunes has not had a sidebar for over a year. You can see one (as iTunes 10 used to show) by doing View > Show Sidebar from iTunes' menu.
But I'm not sure if that is your issue. You do not need a sidebar to do home sharing. Are you running the current iTunes (11.1.3)? Have you turned on sharing in Preferences? Have you done File > Turn on Home Sharing? -
proxy Please specify secure port
All,
I got following messages said:
Fri Dec 29 17:09:46 CST 2000:<I> <WebLogicServer> WebLogic Server started
Fri Dec 29 17:10:14 CST 2000:<E> <proxy> Please specify secure port in the properties. Using default ports 7001/7002 See release notes for more info
Fri Dec 29 17:10:14 CST 2000:<E> <proxy> Please specify secure port in the properties. Using default ports 7001/7002 See release notes for more info
We use WL as proxy server to host the web. There have another 2 clustering machines behide it running WL 5.1 w/SP6. weblogic.properties in proxy server configured as following:
# THE WEBLOGIC PROPERTIES FILE
weblogic.system.listenPort=80
weblogic.password.system=wwwadmin
weblogic.allow.execute.weblogic.servlet=everyone
weblogic.httpd.register.cluster=\
weblogic.servlet.internal.HttpClusterServlet
weblogic.httpd.initArgs.cluster=\
defaultServers=web1:80|web3:80
weblogic.httpd.defaultServlet=cluster
weblogic.security.ssl.enable=true
weblogic.system.SSLListenPort=7003
weblogic.httpd.register.authenticated=weblogic.t3.srvr.ClientAuthenticationServlet
weblogic.security.certificateCacheSize=3
weblogic.httpd.register.AdminCaptureRootCA=admin.AdminCaptureRootCA
weblogic.security.clientRootCA=SecureServerCA.pem
weblogic.security.certificate.server=democert.pem
weblogic.security.key.server=demokey.pem
weblogic.security.certificate.authority=ca.pem
weblogic.httpd.register.Certificate=utils.certificate
weblogic.allow.execute.weblogic.servlet.Certificate=system
weblogic.httpd.enable=true
weblogic.system.nativeIO.enable=true
weblogic.system.enableConsole=true
weblogic.system.executeThreadCount=50
weblogic.system.maxLogFileSize=1024
weblogic.httpd.enableLogFile=true
weblogic.httpd.logFileName=access.log
weblogic.httpd.enableEvents=false
weblogic.httpd.session.enable=true
weblogic.httpd.session.cookie.name=WebLogicSession
weblogic.allow.execute.weblogic.servlet.classes=everyone
weblogic.httpd.register.*.html=weblogic.servlet.FileServlet
weblogic.httpd.register.*.jpg=\
weblogic.servlet.FileServlet
weblogic.httpd.register.*.gif=\
weblogic.servlet.FileServlet
weblogic.httpd.initArgs.*.html=defaultFilename=index.html
weblogic.httpd.register.proxy=weblogic.t3.srvr.HttpProxyServlet
weblogic.httpd.initArgs.proxy=redirectURL=http://web1/
webLOGic.httpd.documentRoot=public_html/
Your input are very appreciated!
Brian
There won't have 2 lines proxy server message again. But now i got following message said:
<Proxy> IOException after server.proxy()....coneection refused
java.net.Connection: Connection refused
What's the minimum setting in weblogic.properties to setup a WL as a proxy server. WL will be 5.1 w/ SP6.
"Ronan Brady" <[email protected]> wrote:
>Your properties line
> weblogic.httpd.initArgs.cluster=defaultServers=web1:80|web3:80
>should read
> weblogic.httpd.initArgs.cluster=defaultServers=web1:80:7003|web3:80:7003
>
>See extract from release notes below:
>
>Additional details on ISSUES 31822:
>
>The following diagram illustrates the differences between setting
>secureProxy="ON" and secureProxy="OFF".
>This feature is set in the WebLogic properties file.
>
>secureProxy=ON
>
>BROWSER<------>HTTPS------>PROXY<------>HTTPS----->WEBLOGIC SERVER CLUSTER
>
>secureProxy=OFF
>
>BROWSER<------>HTTPS------>PROXY<------>HTTP----->WEBLOGIC SERVER CLUSTER
>By passing the secureProxy parameter as an initial argument (in WebLogic
>init.Args) in the cluster servlet and setting it to ON, SSL between the
>proxy and the clusters will be enabled. Below is a demonstration of how to
>turn on the secure proxy feature:
>
>weblogic.httpd.register.cluster=weblogic.servlet.internal.HttpClusterServlet
>weblogic.httpd.initArgs.cluster=\
>defaultServers=server1:7001:7002|server2:7001:7002,\
>secureProxy=ON
>
>
>"Brian Lin" <[email protected]> wrote in message
>news:[email protected]...
>>
>> There still has 2 lines message shown on proxy server:
>> <proxy> Please specify secure port in the properties. Using default ports
>7001/7002 See release notes fore more info.
>>
>> I can see static html on browser now, but servlet and ejb. Before added
>weblogic.security.SSLListenport on command line, the console will said
>undefined this property. But it seems to me not working anyway with message
>returned on proxy server.
>>
>>
>> "Tao Zhang" <[email protected]> wrote:
>> >It should be weblogic.security.SSLListenPort not
>> >weblogic.system.SSLListenPort.
>> >Brian Lin <[email protected]> wrote in message
>> >news:[email protected]...
>> >>
>> >> But proxy server doesn't work in progress (idle).
>> >>
>> >> "Tao Zhang" <[email protected]> wrote:
>> >> >It means that you have to put the listening port and ssl listen port
>in
>> >the
>> >> >2 clustering machines.
>> >> >If you don't use ssl, you can ignore this message.
>> >> >
>> >> >
>> >> >Brian Lin <[email protected]> wrote in message
>> >> >news:[email protected]...
>> >> >>
>> >> >> All,
>> >> >>
>> >> >> I got following messages said:
>> >> >> Fri Dec 29 17:09:46 CST 2000:<I> <WebLogicServer> WebLogic Server
>> >started
>> >> >> Fri Dec 29 17:10:14 CST 2000:<E> <proxy> Please specify secure port
>in
>> >the
>> >> >properties. Using default ports 7001/7002 See release notes for more
>info
>> >> >> Fri Dec 29 17:10:14 CST 2000:<E> <proxy> Please specify secure port
>in
>> >the
>> >> >properties. Using default ports 7001/7002 See release notes for more
>info
>> >> >>
>> >> >> We use WL as proxy server to host the web. There have another 2
>> >clustering
>> >> >machines behide it running WL 5.1 w/SP6. weblogic.properties in proxy
>> >server
>> >> >configured as following:
>> >> >> -------------------------------------
>> >> >> # THE WEBLOGIC PROPERTIES FILE
>> >> >>
>> >> >> weblogic.system.listenPort=80
>> >> >> weblogic.password.system=wwwadmin
>> >> >> weblogic.allow.execute.weblogic.servlet=everyone
>> >> >> weblogic.httpd.register.cluster=\
>> >> >> weblogic.servlet.internal.HttpClusterServlet
>> >> >> weblogic.httpd.initArgs.cluster=\
>> >> >> defaultServers=web1:80|web3:80
>> >> >> weblogic.httpd.defaultServlet=cluster
>> >> >> weblogic.security.ssl.enable=true
>> >> >> weblogic.system.SSLListenPort=7003
>> >> >>
>> >> >>
>> >>
>>
>>>weblogic.httpd.register.authenticated=weblogic.t3.srvr.ClientAuthenticatio
>n
>> >S
>> >> >ervlet
>> >> >> weblogic.security.certificateCacheSize=3
>> >> >> weblogic.httpd.register.AdminCaptureRootCA=admin.AdminCaptureRootCA
>> >> >> weblogic.security.clientRootCA=SecureServerCA.pem
>> >> >> weblogic.security.certificate.server=democert.pem
>> >> >> weblogic.security.key.server=demokey.pem
>> >> >> weblogic.security.certificate.authority=ca.pem
>> >> >> weblogic.httpd.register.Certificate=utils.certificate
>> >> >> weblogic.allow.execute.weblogic.servlet.Certificate=system
>> >> >>
>> >> >> weblogic.httpd.enable=true
>> >> >> weblogic.system.nativeIO.enable=true
>> >> >> weblogic.system.enableConsole=true
>> >> >> weblogic.system.executeThreadCount=50
>> >> >>
>> >> >> weblogic.system.maxLogFileSize=1024
>> >> >> weblogic.httpd.enableLogFile=true
>> >> >> weblogic.httpd.logFileName=access.log
>> >> >> weblogic.httpd.enableEvents=false
>> >> >> weblogic.httpd.session.enable=true
>> >> >> weblogic.httpd.session.cookie.name=WebLogicSession
>> >> >>
>> >> >> weblogic.allow.execute.weblogic.servlet.classes=everyone
>> >> >> weblogic.httpd.register.*.html=weblogic.servlet.FileServlet
>> >> >> weblogic.httpd.register.*.jpg=\
>> >> >> weblogic.servlet.FileServlet
>> >> >> weblogic.httpd.register.*.gif=\
>> >> >> weblogic.servlet.FileServlet
>> >> >> weblogic.httpd.initArgs.*.html=defaultFilename=index.html
>> >> >> weblogic.httpd.register.proxy=weblogic.t3.srvr.HttpProxyServlet
>> >> >> weblogic.httpd.initArgs.proxy=redirectURL=http://web1/
>> >> >> webLOGic.httpd.documentRoot=public_html/
>> >> >> -------------------------------------------------
>> >> >>
>> >> >> Your input are very appreciated!
>> >> >>
>> >> >> Brian
>> >> >
>> >> >
>> >>
>> >
>> >
>>
>
>
-
OSX Logs Me Out For No Apparent Reason
Hi All
I have a weird problem where OSX logs me out for no apparent reason. I have a MacBook 13" late 2008
Model Name: MacBook
Model Identifier: MacBook5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 3 MB
Memory: 8 GB
I'm running Mountain Lion 10.8.2
The logs say
8/10/12 10:16:57.696 PM iPhoto[3141]: NSProButtonCell: attempt to decode an unrecognized element (0)
8/10/12 10:19:42.135 PM Locum[3164]: Connection with distnoted server was invalidated
8/10/12 10:20:35.063 PM Locum[3165]: Connection with distnoted server was invalidated
8/10/12 10:29:41.670 PM BusyCalAlarm[787]: HIToolbox: received notification of WindowServer event port death.
8/10/12 10:29:41.671 PM Dropbox[797]: HIToolbox: received notification of WindowServer event port death.
8/10/12 10:29:41.671 PM com.apple.dock.extra[799]: HIToolbox: received notification of WindowServer event port death.
8/10/12 10:29:41.671 PM talagent[760]: HIToolbox: received notification of WindowServer event port death.
8/10/12 10:29:41.672 PM Safari[3135]: HIToolbox: received notification of WindowServer event port death.
8/10/12 10:29:41.672 PM SystemUIServer[763]: HIToolbox: received notification of WindowServer event port death.
8/10/12 10:29:41.672 PM WebProcess[3137]: HIToolbox: received notification of WindowServer event port death.
8/10/12 10:29:41.686 PM com.apple.dock.extra[799]: port matched the WindowServer port created in BindCGSToRunLoop
8/10/12 10:29:41.683 PM Dock[774]: HIToolbox: received notification of WindowServer event port death.
8/10/12 10:29:41.742 PM WebProcess[3137]: port matched the WindowServer port created in BindCGSToRunLoop
8/10/12 10:29:41.753 PM Dock[774]: port matched the WindowServer port created in BindCGSToRunLoop
8/10/12 10:29:41.759 PM Dock[774]: Lost connection with usernoted.
8/10/12 10:29:42.030 PM com.apple.launchd.peruser.502[203]: (com.apple.Dock.agent[774]) Exited with code: 1
8/10/12 10:30:18.273 PM com.apple.launchd.peruser.502[203]: (com.apple.gamed) Ignored this key: UserName
8/10/12 10:30:18.273 PM com.apple.launchd.peruser.502[203]: (com.apple.gamed) Ignored this key: GroupName
8/10/12 10:30:18.274 PM com.apple.launchd.peruser.502[203]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
8/10/12 10:30:18.282 PM loginwindow[3189]: Connection with distnoted server was invalidated
8/10/12 10:30:21.488 PM talagent[3234]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, _kLSApplicationIsHiddenKey, hidden ? kCFBooleanTrue : kCFBooleanFalse, NULL) produced OSStatus -50 on line 623 in TCApplication.m
8/10/12 10:30:21.490 PM talagent[3234]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, TAL_kLSIsProxiedForTALKey, kCFBooleanTrue, NULL) produced OSStatus -50 on line 626 in TCApplication.m
8/10/12 10:30:27.048 PM SystemUIServer[3235]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
8/10/12 10:30:27.063 PM SystemUIServer[3235]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
8/10/12 10:30:28.469 PM talagent[3234]: CGSReleaseWindowList(cid, windowIDList, count): CGError 1001 on line 918
8/10/12 10:30:32.432 PM com.apple.launchd.peruser.502[203]: (com.apple.afpstat-qfa[3278]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
8/10/12 10:30:32.432 PM com.apple.launchd.peruser.502[203]: (com.apple.afpstat-qfa[3278]) Job failed to exec(3) for weird reason: 2
8/10/12 10:30:50.835 PM Backup Engine[3284]: MaxBack Engine MaxBackEngineController-- MoreSecCopyHelperToolURLAndCheckBundled #1
8/10/12 10:30:50.838 PM Backup Engine[3284]: MaxBackEngineController-- calling MoreSecExecuteRequestInHelperTool
8/10/12 10:30:50.839 PM Backup Engine[3284]: MaxBackEngineController-- back from MoreSecExecuteRequestInHelperTool
8/10/12 10:30:50.840 PM Backup Engine[3284]: MaxBack Engine Error: An error occurred: 0xffffec78 (-5000)
8/10/12 10:30:57.113 PM GrowlLauncher[3263]: Launching Growl at URL: file://localhost/Applications/Growl.app/Contents/MacOS/Growl
8/10/12 10:30:57.363 PM AddressBookManager[3262]: Validate metadata timed out, cancelling
8/10/12 10:30:58.004 PM 1Password Helper[3264]: Starting 1Password Helper 3.9.6 #39600.038 built Jul 6 2012 21:08:25
8/10/12 10:30:58.636 PM 1Password Helper[3264]: reloadAllObjects
8/10/12 10:31:00.005 PM 1Password Helper[3264]: Database (AGHtmlDatabase:file://localhost/Users/deanne.grinter/Dropbox/1Password/1Passwo rd.agilekeychain/) load time [Cache]: 1.365+0.000 (18 objects)
8/10/12 10:31:05.849 PM Growl[3302]: Setup timer, this should only happen once
8/10/12 10:31:05.850 PM Growl[3302]: Next image check no earlier than 24 hours from 2012-10-07 12:59:00 +0000
I'm not sure whats causing this, help is apprecaited!
Regards
DeanneLaunch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
In the Console window, look under DIAGNOSTIC AND USAGE INFORMATION for crash or panic reports. A crash report has a name ending in ".crash" and a panic report has a name ending in ".panic" Select the most recent report from each subcategory and post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful. -
I'm getting these errors in the eventlog and ULS, "An operation failed because the following certificate has validation errors:\n\nSubject Name: CN=SharePoint Security Token Service, OU=SharePoint, O=Microsoft, C=US\nIssuer Name: CN=SharePoint Root
Authority, OU=SharePoint, O=Microsoft, C=US\nThumbprint: <STS CERTIFICATE THUMBPRINT>\n\nErrors:\n\n RevocationStatusUnknown: The revocation function was unable to check revocation for the certificate."
The errors point to the SharePoint Security Token Service as the issue ("The revocation function was unable to check revocation for the certificate") reported back by the Topology service. This is apparent when executing a search, accessing
the managed metadata service, issuing SPSite commands in Powershell, or anything that needs to run through the "SharePoint Web Services" site. I've looked at the certificate assigned to that site and everything appears to be in order.
It would seem to me to be either an incorrect endpoint configuration (internally cached perhaps?) or related to security access for the configuration database (in order to validate the certificate root).
What I’ve tried so far:
I’ve been all over the certificate settings, both in the server store, and within SharePoint Token Service config. Both appear to be configured correctly such that the root CAs can be validated.
Re-entered the passwords for the application pool domain accounts to eliminate these as a potential cause. I’ve also verified the service accounts reporting the error, do have access to the configuration database.
Re-provisioned the STS service to see if that might clear out any cached issues and validated everything else according to this
MS Tech note.
So far nothing has worked. Is there anything else I could be looking at that I've missed? (Full eventlog detail below)
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Date: 2/20/2015 11:19:41 AM
Event ID: 8311
Task Category: Topology
Level: Error
Keywords:
User: <SP SERVICE ACCOUNT>
Computer: <SHAREPOINTSERVER>
Description:
An operation failed because the following certificate has validation errors:\n\nSubject Name: CN=SharePoint Security Token Service, OU=SharePoint, O=Microsoft, C=US\nIssuer Name: CN=SharePoint Root Authority, OU=SharePoint, O=Microsoft, C=US\nThumbprint: <STS
CERT THUMBPRINT>\n\nErrors:\n\n RevocationStatusUnknown: The revocation function was unable to check revocation for the certificate.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
<EventID>8311</EventID>
<Version>14</Version>
<Level>2</Level>
<Task>13</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2015-02-20T17:19:41.213852500Z" />
<EventRecordID>1611121</EventRecordID>
<Correlation />
<Execution ProcessID="10212" ThreadID="10328" />
<Channel>Application</Channel>
<Computer><SHAREPOINTSERVER></Computer>
<Security UserID="<SP SERVICE ACCOUNT>" />
</System>
<EventData>
<Data Name="string0">CN=SharePoint Security Token Service, OU=SharePoint, O=Microsoft, C=US</Data>
<Data Name="string1">CN=SharePoint Root Authority, OU=SharePoint, O=Microsoft, C=US</Data>
<Data Name="string2"><STS CERT THUMBPRINT></Data>
<Data Name="string3">RevocationStatusUnknown: The revocation function was unable to check revocation for the certificate.
</Data>
</EventData>
</Event>Hi Darren,
This problem seems to occur when an administrator deletes the local trust relationship of the farm from the Security section of the Central Administration website
In order to resolve this problem, the local trust relationship has to be created. This can be done by running the following PowerShell commands
$rootCert = (Get-SPCertificateAuthority).RootCertificate
New-SPTrustedRootAuthority -Name "localNew" -Certificate $rootCert
After running the above commands, perform an IISReset on all servers in the farm.
More information:
http://support.microsoft.com/kb/2545744
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support -
Audit Log is required for Project server
Hi,
Audit Log is required for EPM / Project Server 2010
Following are the requirements.
Project Name, Resource Name and Date of Following Events.
1. Project checked Out By, Date (This is highly important)
2. Project Checked In By, Date
3. Project Published By, Date
4. Project Saved By, DateHi Hachishti,
Please refer to a recent similar thread with excellent answer from Paul.
http://social.technet.microsoft.com/Forums/projectserver/en-US/435fbb7a-1c82-419c-b83e-e89419dc66aa/project-server-2010-view-plan-save-history?forum=projectserver2010general
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS -
E proxy Please specify secure port in the properties.
Hi,
I have a cluster of two weblogic servers as 192.168.80.144 and
192.168.80.147 both are in NT. I have installed weblogic in both m/c in
same folder. Do I need to put the same port number ( what port number
443 ? or anyone ? ) in [weblogic]/weblogic.properties and
[weblogic]/[mycluster]/weblogic.properties. I have tried putting 443 and
7001. Then what ip-address will be used to put the request ? I tried to
request on mycluster:443 and mycluster:7001 where mycluster is the name
of the cluster in both m/c and there is an entry in hosts file of NT for
192.168.80.144 and 192.168.80.147 as mycluster.
After starting the server it says
Tue May 22 10:00:54 CEST 2001:<I> <Cluster> Adding server
7537245419133606340S192.168.80.147:[443,443,7002,7002,443,-1]
to cluster view
Tue May 22 10:00:58 CEST 2001:<I> <NT Performance Pack> Allocating: '2'
NT reader threads
Tue May 22 10:01:05 CEST 2001:<I> <WebLogicServer> WebLogic Server
started
Tue May 22 10:01:57 CEST 2001:<I> <ServletContext-General> *.html: init
When I send the request thru browser it says following:
Tue May 22 10:01:57 CEST 2001:<E> <proxy> Please specify secure port in
the properties. Using default ports 7001/7002 Se
e release notes for more info
Tue May 22 10:01:57 CEST 2001:<E> <proxy> Please specify secure port in
the properties. Using default ports 7001/7002 Se
e release notes for more info
Please suggest me what to do for running the cluster properly.
Thanx in advance.
Vinay Kumar
Gauss Interprise AG Phone: +49-40-3250-1226
Weidestrasse 120 A Mobile: +49-177-7906818
D-22299 Hamburg mailto:[email protected]
Germany web: http://www.gauss-interprise.com
[att1.html]
Clustering is a big topic that cannot be explained in one post. That was why I suggested the link for a complete explanation. The link does provide tons of information you need to setup a cluster.
However, here are some pointers for your case as applicable to WebLogic 5.10 clustering (which is what you seem to be running).
(1) Weblogic properties have the following precedence (properties defined in the first item in the following list override the same properties defined in the second item in the list and so on): command line properties, per-server property file, cluster-wide property file and finally global property file.
If you installed Weblogic 5.10 under /weblogic and your cluster is called "mycluster" and your server is called "Server1" and you command line script is stored in a file called "startServer1.cmd" under /weblogic, then weblogic will read the properties in the following order (the latest read overrides the same properties from an earlier read):
(a) /weblogic/weblogic.properties <-- global property file
(b) /weblogic/mycluster/weblogic.properties <-- cluster-wide property file
(c) /weblogic/mycluster/Server1/weblogic.properties <-- per-server property file
(d) properties defined in startServer1.cmd <-- command line properties
In your case, a good place to place the port number is in the cluster-wide property file (since all servers in the cluster should use the same port). Do not specify any ports in the per-server property file or in the command line properties in this case as they will override the port specified earlier.
(2) In 5.10, you will typically have a bank of webservers (Apache, Netscape, IIS) in front of the cluster. Several configurations are possible. You can for instance have a hardware load-balancer in front of the webserver. You can then have the DNS serve up the external IP of the load-balancer. Alternatively, you can also do DNS round-robin among the webservers. Clients will then use the DNS name in the URL which will map to either the load-balancer or one of the webservers.
Check this link out for details on architecture:
http://www.weblogic.com/docs51/cluster/planning.html#1040272
Giri
"Vinay Kumar" <[email protected]> wrote in message news:[email protected]...
Hi Giri,
From this very link I got the idea to use weblogic cluster.
So this is not of much help.
Thanx.
Giri Alwar wrote:
Take a look at the following document: http://www.weblogic.com/docs51/cluster/index.html Giri
"Vinay Kumar" <[email protected]> wrote in message news:[email protected]... Hi,
I have a cluster of two weblogic servers as 192.168.80.144 and 192.168.80.147 both are in NT. I have installed weblogic in both m/c in same folder. Do I need to put the same port number ( what port number 443 ? or anyone ? ) in [weblogic]/weblogic.properties and [weblogic]/[mycluster]/weblogic.properties. I have tried putting 443 and 7001. Then what ip-address will be used to put the request ? I tried to request on mycluster:443 and mycluster:7001 where mycluster is the name of the cluster in both m/c and there is an entry in hosts file of NT for 192.168.80.144 and 192.168.80.147 as mycluster.
After starting the server it says
Tue May 22 10:00:54 CEST 2001:<I> <Cluster> Adding server 7537245419133606340S192.168.80.147:[443,443,7002,7002,443,-1]
to cluster view
Tue May 22 10:00:58 CEST 2001:<I> <NT Performance Pack> Allocating: '2' NT reader threads
Tue May 22 10:01:05 CEST 2001:<I> <WebLogicServer> WebLogic Server started
Tue May 22 10:01:57 CEST 2001:<I> <ServletContext-General> *.html: init
When I send the request thru browser it says following:
Tue May 22 10:01:57 CEST 2001:<E> <proxy> Please specify secure port in the properties. Using default ports 7001/7002 Se
e release notes for more info
Tue May 22 10:01:57 CEST 2001:<E> <proxy> Please specify secure port in the properties. Using default ports 7001/7002 Se
e release notes for more info
Please suggest me what to do for running the cluster properly.
Thanx in advance.
Vinay Kumar
Gauss Interprise AG Phone: +49-40-3250-1226
Weidestrasse 120 A Mobile: +49-177-7906818
D-22299 Hamburg mailto:[email protected]
Germany web: http://www.gauss-interprise.com
Vinay Kumar
Gauss Interprise AG Phone: +49-40-3250-1226
Weidestrasse 120 A Mobile: +49-177-7906818
D-22299 Hamburg mailto:[email protected]
Germany web: http://www.gauss-interprise.com
[att1.html]
-
Hi
-when i install default instance MSSQLSERVER i added a domain account as a service account,
- when i change port for TCPIP PORT , and after sql service and sql agent service did not started again.
it thrown error
The SQL Server (MSSQLSERVER) service failed to start due to the following error:
The service did not start due to a logon failure.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7000</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
but when i add domain\sqservice account in administrators group these services started,
1) here why this change behavior happened
2i changed the port 1500
adilHI
the sql instance service is running with domain/sqlservice account ,
- i stopped the sql service service
- when i start it not started again and i found below error message
Domain and account: MOJPORTAL\spsqlservice
This service account does not have the required user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this.
If this computer is a node in a cluster, check that this user right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed,
check with your domain administrator to find out if a Group Policy object associated with this node might be removing the right.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7041</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2015-04-24T17:12:58.326973300Z" />
<EventRecordID>2177</EventRecordID>
<Correlation />
<Execution ProcessID="520" ThreadID="4044" />
<Channel>System</Channel>
<Computer>PORTALSQL1.mojportal.com</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">MSSQL$xSQL</Data>
<Data Name="param2">xxxL\spsqlservice</Data>
</EventData>
</Event>
adil -
Notifications for Android ported Apps on BB Z10
Hi Experts,
I know this may sound like a repeat of topic. However, I have read many links on this communinty and crackberry as well. TO be candid, there has not been one link where a straight forward way to enable notifications into hub for andoid ported apps is clearly shown.For a person like me who is not a developer in particular, it is becoming hell lot difficult to get this done. I have got a new Z10 and because of it I am completely cut off with the updates on News, sports etc.
Is there a common way to enable notifications for android ported (sideloaded) apps (example: Twitter, NDTV, CNN-IBN, CricketNext18, ESPN Cricinfo etc.)? Can someone please consolidate the same at one place?
I must mention that I am using 1Mobile or Amazon app store to get APKs for Andoid apps. If there is a different way which will enable notifications by default, I would be eager and happy to know.
Also just as a example, if I try to enable notification for Android ported Twitter (by making Notifications from OFF to ON in the app itself), it processes the request for somtime anf d then always says, there is a issue encountered in enabling notifications.
My phone does not get recognized by a PC or tools to install BAR file via PC. Media card is available for media exchange but not the phone. Also Link also does not recognize my phone. Have already tried the typical methods by reading posts like changing USB cable and all that.
I have enabled development mode on my BB Z10. Can someone solve these issues for me to make my new BB experience worth?skhere4u wrote:
Hi Experts,
I know this may sound like a repeat of topic. However, I have read many links on this communinty and crackberry as well. TO be candid, there has not been one link where a straight forward way to enable notifications into hub for andoid ported apps is clearly shown.For a person like me who is not a developer in particular, it is becoming hell lot difficult to get this done. I have got a new Z10 and because of it I am completely cut off with the updates on News, sports etc.
Is there a common way to enable notifications for android ported (sideloaded) apps (example: Twitter, NDTV, CNN-IBN, CricketNext18, ESPN Cricinfo etc.)? Can someone please consolidate the same at one place?
I must mention that I am using 1Mobile or Amazon app store to get APKs for Andoid apps. If there is a different way which will enable notifications by default, I would be eager and happy to know.
Also just as a example, if I try to enable notification for Android ported Twitter (by making Notifications from OFF to ON in the app itself), it processes the request for somtime anf d then always says, there is a issue encountered in enabling notifications.
My phone does not get recognized by a PC or tools to install BAR file via PC. Media card is available for media exchange but not the phone. Also Link also does not recognize my phone. Have already tried the typical methods by reading posts like changing USB cable and all that.
I have enabled development mode on my BB Z10. Can someone solve these issues for me to make my new BB experience worth?
Application Notifications will not be available if the app is not listed in Notifications - Customisation - Applications - Core or Other.
Check if your phone is not set to Mass Storage in Storage and Access, only the media card can be accessed in this mode.
Easiest way to sideload is via Snap. -
Every time I TRY to start firefox 18-19 I get an error message : "Firefox has stopped working" - "close the program and check online for a solution" - or - "close the program" this happens TWICE every time I try to start firefox. Eventually after a random number of tries firefox will start normaly. I am useing firefox 19.0.2 now bit I belive it started when I upgraded to firefox 18 but am not sure, it might have been when I upgraded to firefox 19 ... but it has been happening for a very long time and I cannot find any helpfule solutions online.
I have tried a Clean reinstall but it did not help.Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.
Maybe you are looking for
-
Budget availibilty control against Goods Issue
Hi all, can anybody help me in the following issue.... in a budgeted/released cost project (WBS elements only): i set up a budget profile (overall & annual years, and availability control against annual values), and assigned it to the project i confi
-
How to get current rownumber of Tabular Form
I have created one tabular form having fields 'courseid', 'coursename', 'courseduration', 'clickhere'. The last column is a link to next page. I have one textbox named p101_cid. 'clickhere' column display link "For participating click here." Suppose
-
How do I set up a verizon email account on my iphone? I have tried several differnet things for the host name and nothing works. Verizon.com says use incoming.verizon.net and apple.com says use incoming.yahoo.verizon.net neither works. Called apple a
-
I planning to close the year 2007 (AJAB) and would like find out why the AUC class is in T code AJAB. Do i have have to do anything on AUC field and what is the purpose of the Auc field in T code AJAB Thank you and pls help me out
-
Well i upgraded from 2 to 3 today, then installed 3.0.1 before firing Aperture up. The upgrade went okay with my meger 5k of images in a 45GB library so ive finally got time to have a play. Anyway, ive just been playing with the brushes, in particula