Log "date completed" to the date when "completed" was updated to "yes
Hello,
I want a workflow to fill "date completed" with the date when "completed" is updated to "yes". I am using Sharepoint Designer 2013.
I have been through hours of research but I could not find any post clear enough to me. Please do not refer me to ancient threads.
Thanks!
PS: Below find what I have tried. It does not return anything in "date completed" in my task list...
Hi Edouard,
According to your description, my understanding is that you want to set the ‘CompletedDate’ when the ‘Completed’ is Yes.
You can set the workflow like the screenshot below:
And set the workflow started when a new item is created or an item is changed.
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support
Similar Messages
-
i lost data worth 2 months when i was updating the ios7 software on my iphone 5 .....
unfortunatley i forgot to perform a backup in that time span as well....
is there a way of recovering txt msgs photos and other saved data from a particular span? without backups?Without a backup there is no way to recover data.
Seems you've learned a valuable lesson about how important it is do regularly backup the device. -
The Question says it all really.
Is there any way i can log onto Game Center via just my Username as i have forgotten the other details (I made the account when i was 11 - I'm now 14 and have a bad memory)?
I remember my Username on Gamcenter but due to the recent update of iOS7, it is only letting me Sign in through my APPLE ID - which i have forgotten over time. I wish to recover my account recently because I remember purchasing Gems on the game 'Clash of Clans' and I wish I could restart playing the game.
Many thanks for taking your time to read and answer this question.
-Gavin Chong.Hey xChongy!
I have an article here that can help you find that forgotten Apple ID:
Apple ID: How to find your Apple ID
http://support.apple.com/kb/HT5625
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
i have just updated my phone its iphone 4 and when it was updated it demanded something like to restore an d mobile went off ,i dont wanna lose all my data so help me out what to do ,Thanks
yeah its really like that you mentined , so what to do now .
current situation is that i havent yet restored it,phone is off asking for connecting to itunes and after connecting it is demanding for restore, so where can i access to backup data ? -
The other day I had to reset my phone because i pulled it out from my laptop when it was updating. I then tried to restore it but i clicked the wrong option and it has restored all of my stuff from 2 years ago, is there any way to get back the stuff I had
maggielou wrote:
I thought that I had backed up my pictures to icloud, but when I looked online at icloud, I don't see pictures listed. However, a few of the recent pictures have shown up on my phone.
IHow could I get these from my MacBook to my phone?
Thanks again.
When you log into you icloud account on your computer you are viewing data that you sync to icloud not the backups. You can't view the backups.
Look at the two links I provided.
You still didn't answer any of my two questions I asked. -
When i was updating i phone version 4 from Itunes. It got stuck in middle of updating, after uninstall the version3. But new version was not installed. Now itunes is not detecting the iphone and iphone is also not working and showing connection cable with itunes. Pls help..
Check your system for possible Malware. But you have to do it in WIndows Safe Mode.
(Do not use your own Anti-virus to SCAN)
Start your computer in "Safe mode with networking", go to this link download a free version of Malwarebyte.
http://www.malwarebytes.org/products/malwarebytes_free
Install and perform update immediately, then do a full SCAN. Remove malware if it indeed finds any. Restart computer to regular windows to let Malwarebyte complete the removal.
To start your computer in safe mode
Press and hold the F8 key as your computer starts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you'll need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.
On the Advanced Boot Options screen, use the arrow keys to highlight the "safe mode with networking" option, and then press Enter. Log on to your computer with a user account that has administrator rights.
When your computer is in safe mode, you'll see the words Safe Mode in the corners of your screen. To exit safe mode, restart your computer and let Windows start normally. -
ACL does not correctly order the permissions when they are updated
Outlook Connector sjab32.dll 7.1.228.0 sjms32.dll 7.1.228.0 sjui32.dll 7.1.228.0 sjtp32.dll 7.1.228.0
Problem: We have identifed an issue with editing calendar permissions using the Outlook Connector. Basically the calendar ACEs are evaluated on a first match basic. Outlook Connector does not correctly order the permissions when they are updated. A brief example is below. Editing permissions via UWC works fine and will in fact fix any out of order ACE entries.
Basic calendar permission:
1.aces=@@o^a^rsf^g;@@o^p^rw^g;@@o^c^wdeic^g;@^a^sf^g;@^c^^g;@^p^r^g^
after adding user mab, Ace has now been re-ordered so that the everyone permissions are now before the owner permissions:
2.aces=mab^p^r^g;mab^c^rwd^g;mab^a^rsf^g;@^c^rwd^d;@^c^^g;@^p^r^g;@^a^sf^g;@@o^c^wdeic^g;@@o^p^rw^g;@@o^a^rsf^g
any suggestion as to why this re-ordering is happening when updated through OC and any supporting doucuments for ACLHi,
This issue is most likely related to bug #6471869 (Outlook Connector allows invites to users with restricted permissions). This has been fixed in the latest Outlook Connector 7.1_233 (aka 122018-09). I recommend logging a Sun support case to get a copy of this new release.
Regards,
Shane. -
When I was updating my ipod touch 4g 8g 4.3.3 the USB came out and now it just shows connect to itunes and when i try to update it comes with error 6. I do all of the help things and nothing happoned
First see if placing the iPod in Recovery Mode will allow a restore.
Next try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If not successful then time for an appointment at the Genius Bar of an Apple store. You are not alone with this problem. -
Hello. Today, I was updating my iPod Touch 4th Generation to iOS 6. I unplugged the iPod when it was during the installation because it appeared to be frozen. Now the iPod is stuck at a light blue screen even after I reset it. How do I fix it?
You will need to do a DFU restore by holding the home and power buttons down (while the device is plugged in to your computer) until the device's screen goes black and as soon as the screen goes black, count down from 3 and release the power/sleep button, but keep holding down the home button. Then, iTunes will say the iPod needs to be restored. The restore process will take some time and even though the iPod may appear to be frozen, don't interrupt the restore.
-
i have macbook pro i got it from craiglist, when i was updating the oprating sestem its asking me for sestem unlocking pin? where can i get it from?
I would recommend wiping the system and reinstalling the OS for any used system. OS X does not have any "unlocking pin" of sorts so this may be from some third-party software on the system. The system does have a "firmware password" option that can be set to prevent booting to alternative boot environments (ie, external hard drives, safe mode, etc), but this will not prevent system updating.
-
i was in the process of jailbreaking and updating my ipod and when i was updating it,it went into recovery mode and now i cant get it out of recovery mode so what can i do??
Go elsewhere:
Jailbreaking voids the Apple warranty and also means that you will not get any support from Apple, including from this Apple forum. Jailbreaking can't be discussed in this Apple forum.
Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues -
The bursting of the screen when I was loading device
the bursting of the screen when I was loading device
I believe this needs to be examined and fixed at a repair center. For more information about how to submit your phone for repair and where, contact your local support team.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page. -
i am having problem when i am updating my iphone 4 to ios 5 ..it get update n took 50 minutes then at the end when it was processing file ...suddenly an error comes that an unknown error accurred {9006}..please help me..how will i update my iphone 4
Error 9006: Following Troubleshooting security software frequently resolves this error. There may be third-party software installed that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your Registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet size modification for assistance.
-
When I was updating my iphone to the new iOS at the final part (when the syncronization is beind done in iTunes), it never finshed. It's been more than 1 hour and it says "syncronizing step 2 of 4". What to do in this case?
Hi lucaloo,
Welcome to the Support Communities!
The article below may be able to help you with this.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Cheers,
- Judy -
HT4972 When i was updating the software on my iphone 4 it froze during installation.
When i was updating the software on my iphone 4 it froze during installation. When i reset it, it would not turn on. now once it is hooked up to iTunes it says it needs to be restored and i believe Iwill lose all the contacts. Any help?
rhinob wrote:
This won't do anything.
Thanks for clearing that up all mighty Apple god.
rhinob wrote:
I am having the same problem.
Really? And you know this based on what? The lack of a specific error message from the OP?
rhinob wrote:
I am assuming
Yes... and as the saying goes, when one assume they make an a$$ out of u and me.
Stop assuming, let the OP provide some more specifics and then some actual troubleshooting can be done. It's unlikely that your issue and the OP's are related.
Maybe you are looking for
-
I have 2 client workspaces 102 (Live) and 105 (Testing) and also have the same thing replicated in my own environment 102 and 105, the idea is that I develop changes in my 105 workspace and export/import into the client 105 for testing and then the c
-
hi, i am using 7zip in ssis process execute task. variable name defines the files to be zipped. all works fine till at random times the process execute task takes the default values of the variables instead of the run time values. And then ssis packa
-
Getting a wrapper container div to adjust to the height of the content within it.
Hey - I have a "wrapper" div tag set up and then I have a bunch of separate div boxes within that. The way I did it is all the div boxes within the wrapper are set to "absolute" position and then I basically put them all where I wanted them by defini
-
Compiler error, unexpected conversion in my cRIO program
Hello, When I open, or try to run a vi I get this message about 8-9 times, Compiler error. Report this problem to National Instruments Tech Support. Unexpected conversion. src type=112, dst type=7 This program is meant to be used on a cRIO system in
-
SQLBroseConnect() & SQLColAttribute()
Hello, I am writing to you about a series of problems that I have while trying to connect to Oracle 11g through ODBC in a C++ application. So, first of all, I downloaded Oracle 11g from Oracle’s website. I installed it in a Virtual Machine (Windows X