Log Directories in Oracle 10g RAC environment

Hi all,
Would you please tell me in which directories, the following log files will be created, in a Oracle 10g RAC enviroment.
evmd.log
crsd.log
ocssd.log
Best Regards,
Narayan

U should try login as root and then type:
find / -name nameoffileyouaresearchingfor
This command will show You location of those files.

Similar Messages

Are multiple PHYSICAL databases supported in one Oracle 10g RAC environment

Hi alls,
as of Metalink 220970.1 Oracle RAC is also supporting different databases in one cluster installation. RAC handles any resource as a service and it doesn't matter if these services belongs to only one or to different databases. You install the Oracle Clusterware only once and you create any service you want to make high available.
So is technically possible to install multiple databases on same Oracle Rac environment.
My doubts are related to SAP , does SAP certify such environments ?? we could have one SAP R/3 database and SAP BW database co-exist in a single Oracle RAC environment. or also co-exist SAP database with a non-SAP database (an already existing application) in the same Oracle Rac environment.
Any comment would be higly appreciated.
Silvio Brandani

We have ECC, BI, PI and Portal running on same Oracle RAC environment. We have one RAC for QA systems and one for PRD systems. We are not running any SAP applications along with Non-SAP applications on RAC. Keeping SAP and non-SAP apps separate would be a way to go.
Hope this helps.
Thanks,
Naveed

Oracle 10g RAC - Private Interconnect on Private non-routable VLAN

In our data center there is an existing Oracle 10g RAC configured with private VLAN for Interconnect administered by a different group of DBAs.
We are designing a new, separate Oracle 10g RAC environment to support our application.
When we discussed with our data center folks to set up a private VLAN for our RAC Interconnect, they suggest to use the same existing Private VLAN used by other Oracle RAC configurations. In that case the Interconnect IPs will be on the same subnet as other Oracle RAC configurations.
For example, if
RAC1 with 2 nodes is using 192.168.1.1 and 192.168.1.2 in the VLAN_1 for the Interconect, they want us to use the same VLAN_1 with Interconnect IPs 192.168.1.3 and 192.168.1.4 for our 2 node RAC.
Is Sharing same subnet on the same Private VLANs for interconnects of different RAC configurations supported?
Will that cause any performance hit? That means the Interconnect IPs of One RAC configuration is pingable from other RAC configuration.
Did anyone come across such a design?
Could not find any info on this on Metalink.
Thanks

yes
this is practically very much feasible.. as you would have only 4 m/c in ip subnet .... and this is very much less than the public subnet which we should refrain from using from interconnect.

Upgrade Oracle 10g RAC - Oracle 11g RAC on Linux Environment

We are planning to Upgrade our databases to Oracle 10g RAC - Oracle 11g RAC which is Linux Environment. Kindly suggest me the best option for migration. Our production database size is 80GB.
- Frest installation of oracle 11g using export/iimport dumps
- Migration
- Upgrade process
Any information regarding this will be appreciated.

Pl identify exact versions of "10g" and "11g", along with the exact OS versions.
Pl see the upgrade doc - http://docs.oracle.com/cd/E11882_01/server.112/e23633/toc.htm
HTH
Srini

Oracle database not starting up in oracle 10g RAC

Hi!
Recently I came across one problem with one node oracle 10g RAC.When the Oracle database is started,while opening it is giving ORA-03113:End of file on communication channel error.When I saw the the alert trace file and other trace files I found Disk group is exhausted error and it is not able to create .dbf files.Actually it is not a production server and I gave archive log destination in SAN.Even the spfile(content of init_database.ora) is in SAN..
I tried Asmcmd utility to delete the archive log files.As the oracle is not available I am not able to asmcmd prompt.
How to change the destination of archive log and to remove the old archive log files(as it is a testing environment we can remove) from SAN?Please let me know.
Thanks & Regards
Srikanth MVS

keithrust wrote:
On VMware there's a known issue with Oracle databases on a Windows client not starting up properly all the time and a manual startup using oradim -start -sid <whatever> is required to get it fully running. Hmmm, doing it several time, and never seen such issue. Which "known issue" and by who are you talking about ?
I created a brand new Oracle VM Windows 2003 32-bit server, installed the Oracle drivers for paravirtualization, and whammo, the problem is still hereI'm sure, you miss something somewhere in the config. Right now, you're on supported configuration, you could either raise a SR to the support, or get help from your peer on Oracle Database General forum.
Ah, but it's not a Windows issue. On a non-VM Windows box the database starts just fine all the time. Again, this is a known issue acknowledged by Oracle on the VMware side, I'm just surprised it exists on the Oracle VM side.Again, give more details about this "known issue". Never heard about that, eventhough I've been around for years.
I was afraid you were going to ask that. I'll have to search for it again, but I think you can do the same as well....Well, I doubt you could find a Metalink note about Oracle on VMWare. So far, Oracle has always refused to support database on OS virtualized on VMWare (or any VM software other than Oracle VM). Based on that, you could be sure, your "known issue" is not an issue on Oracle VM.
If you want more help, again, give more details about your issue.
Nicolas.

Regarding Services in Oracle 10g RAC

Hi All,
We are having Oracle 10g RAC (10.2) on Linux machines. We don't have any services configured failover. This can be visible from srvctl config database -d, as nothing related services information is displayed.
I even checked failover_type and Failover_method from GV$session and for all it's showing None. We have only default database service (same as database name).
My question is:
Can I modify/configure this default service as failover/loadbalance enabled using srvctl? If so, please let me know.
PS: I can't provide any output here as our client network doesn't permit copying.
Regads,
Kumar

Hi,
THank you for your inputs. Below is the configurations settings of my environment.
Client Side TNS Entry:
jdbc:oracle:thin:@(DESCRIPTION = (LOAD_BALANCE=on) (FAILOVER=on) (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = eb1-db-svr-rac)(PORT = 1521)) (ADDRESS = (PROTOCOL = TCP)(HOST = eb1-db-svr-rac2)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = prod) (SERVER = DEDICATED) (FAILOVER_MODE= (TYPE=SELECT) (METHOD=PRECONNECT))))
Below are the tns and listener details for both servers eb1-db-svr and eb1-db-bck-svr and both instances have remote_listener as “LISTENERS_PROD”
eb1-db-svr-bck# lsnrctl status LISTENER_EB1-DB-SVR-BCK
LSNRCTL for Solaris: Version 10.2.0.4.0 - Production on 06-DEC-2013 11:27:20
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=eb1-db-svr-bck-rac)(PORT=1521)(IP=FIRST)))
STATUS of the LISTENER
Alias                     LISTENER_EB1-DB-SVR-BCK
Version                   TNSLSNR for Solaris: Version 10.2.0.4.0 - Production
Start Date                19-OCT-2013 14:21:18
Uptime                    47 days 22 hr. 6 min. 2 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /oracle/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File         /oracle/app/oracle/product/10.2.0/db_1/network/log/listener_eb1-db-svr-bck.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.207.195.31)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.207.195.35)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM2", status BLOCKED, has 1 handler(s) for this service...
Service "+ASM_XPT" has 1 instance(s).
Instance "+ASM2", status BLOCKED, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PROD" has 2 instance(s).
Instance "PROD1", status READY, has 1 handler(s) for this service...    ---> SHOWING TWO SERVICES ON NODE2
Instance "PROD2", status READY, has 2 handler(s) for this service...
Service "PROD_XPT" has 2 instance(s).
Instance "PROD1", status READY, has 1 handler(s) for this service...
Instance "PROD2", status READY, has 2 handler(s) for this service...
The command completed successfully
eb1-db-svr# lsnrctl status LISTENER_EB1-DB-SVR
LSNRCTL for Solaris: Version 10.2.0.4.0 - Production on 06-DEC-2013 11:24:42
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=eb1-db-svr-rac)(PORT=1521)(IP=FIRST)))
STATUS of the LISTENER
Alias                     LISTENER_EB1-DB-SVR
Version                   TNSLSNR for Solaris: Version 10.2.0.4.0 - Production
Start Date                25-NOV-2013 20:43:08
Uptime                    10 days 14 hr. 41 min. 34 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /oracle/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File         /oracle/app/oracle/product/10.2.0/db_1/network/log/listener_eb1-db-svr.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.207.195.30)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.207.195.32)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status BLOCKED, has 1 handler(s) for this service...
Service "+ASM_XPT" has 1 instance(s).
Instance "+ASM1", status BLOCKED, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PROD" has 1 instance(s).
Instance "PROD1", status READY, has 2 handler(s) for this service...   --> SHOWS ONLY ONE HANDLER FOR THIS
Service "PROD_XPT" has 1 instance(s).
Instance "PROD1", status READY, has 2 handler(s) for this service...
The command completed successfully
eb1-db-svr# cat listener.ora
# listener.ora.eb1-db-svr Network Configuration File: /oracle/app/oracle/product/10.2.0/db_1/network/admin/listener.ora.eb1-db-svr
# Generated by Oracle configuration tools.
SID_LIST_LISTENER_EB1-DB-SVR =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = /oracle/app/oracle/product/10.2.0/db_1)
      (PROGRAM = extproc)
LISTENER_EB1-DB-SVR =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = eb1-db-svr-rac)(PORT = 1521)(IP = FIRST))
      (ADDRESS = (PROTOCOL = TCP)(HOST = 10.207.195.32)(PORT = 1521)(IP = FIRST))
eb1-db-svr# cat tnsnames.ora
# tnsnames.ora Network Configuration File: /oracle/app/oracle/product/10.2.0/db_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
LISTENERS_PROD =
(ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = eb1-db-svr-rac)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = eb1-db-svr-bck-rac)(PORT = 1521))
PROD =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = eb1-db-svr-rac)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = eb1-db-svr-bck-rac)(PORT = 1521))
    (LOAD_BALANCE = yes)
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = PROD)
PROD2 =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = eb1-db-svr-bck-rac)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = PROD)
      (INSTANCE_NAME = PROD2)
PROD1 =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = eb1-db-svr-rac)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = PROD)
      (INSTANCE_NAME = PROD1)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
eb1-db-svr-bck# cat listener.ora
# listener.ora.eb1-db-svr-bck Network Configuration File: /oracle/app/oracle/product/10.2.0/db_1/network/admin/listener.ora.eb1-db-svr-bck
# Generated by Oracle configuration tools.
SID_LIST_LISTENER_EB1-DB-SVR-BCK =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = /oracle/app/oracle/product/10.2.0/db_1)
      (PROGRAM = extproc)
LISTENER_EB1-DB-SVR-BCK =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = eb1-db-svr-bck-rac)(PORT = 1521)(IP = FIRST))
      (ADDRESS = (PROTOCOL = TCP)(HOST = 10.207.195.35)(PORT = 1521)(IP = FIRST))
eb1-db-svr-bck# cat tnsnames.ora
# tnsnames.ora Network Configuration File: /oracle/app/oracle/product/10.2.0/db_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
LISTENERS_PROD =
(ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = eb1-db-svr-rac)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = eb1-db-svr-bck-rac)(PORT = 1521))
PROD =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = eb1-db-svr-rac)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = eb1-db-svr-bck-rac)(PORT = 1521))
    (LOAD_BALANCE = yes)
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = PROD)
PROD2 =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = eb1-db-svr-bck-rac)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = PROD)
      (INSTANCE_NAME = PROD2)
PROD1 =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = eb1-db-svr-rac)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = PROD)
      (INSTANCE_NAME = PROD1)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)

Oracle 10g RAC installation on HP-UX 11.31 for SAP ERP 6.04

Dear experts,
We are trying to install SAP ERP 6.0 EHP4 with Oracle 10g RAC on HP-UX 11.31. Please note that, We are using VERITAS cluster filesystem (CFS) for this purpose and not HP-UX ServiceGuard ClusterFileSystem.
*As per SAP procedure, we have installaed plain plain SAP system with single instance Oracle (ref: Configuration of SAP NetWeaver for Oracle Database 10gRAC guide). Now we are first trying to install Oracle Clusterware (CRS) and then we will install Oracle RAC software. Is this procedure right?*
Which file (and its path) we have to use for CRS installation and its patch? Is it runInstaller under /oracle/stage/102_64/clusterware? With this file we can install CRS 10.2.0.1. Similarly for Oracle RAC, which files we are supposed to use, i.e for installation and patch upgrade?
Also can we use clusterware package available from Oracle directly in the SAP environment?
We tried to install CRS with runInstaller while running Configuration Assistant after root.sh script.
The following commands are failing in Configuration Assistant:
/oracle/CRS/102_64/bin/racgons add_config erpprdd1:4948 erpprdd2:4948
/oracle/CRS/102_64/bin/oifcfg setif -global lan1/20.20.20.0:cluster_interconnect lan0/192.168.3.0:public
/oracle/CRS/102_64/bin/cluvfy stage -post crsinst -n erpprdd1,erpprdd2
1st command does not give any output if run manually.
2nd commands o/p: PRIF-12: failed to initialize cluster support services
3rd commands fails in every check
Please suggest the solution and expecting answers to the above mentioned questions.
Thanks & Regards,
Tejas

>
Charles Yu wrote:
> Q1: Oracle RAC with 9.2.x on HP-UX?
> A: For HA environment, cluster software is: MC/SG on HP-UX 11.31; there are optional components of MC/SG for supporting Oracle RAC and SAP application. I was confused that I could not find the installation guide regarding 4.6C on MC/SG HA environment of HP-UX.
> Charles
Relevant docs for Service Guard (SG) cluster are available at http://docs.hp.com. Hope you have checked for the suport of oracle 92x on HP-UX 11.31
>
Charles Yu wrote:
> Q2: Any reason why you don't use a supported database version?
> A: Actually, in order to avoiding the the risk of database upgrade and minimizing the migration risk, top level has decided that keeping the same Oracle version. Indeed, we don't plan the migration of application. On the other hand, it is complicated to do the assessment for application migration.
> Charles
You can go for combined os migration and db release upgrade also at a stretch with the same downtime.

Oracle 10g rac installation on IBM power server

Dear Gurus,
I am installing Oracle 10g RAC on IBM power server but while running CRS getting the following errors. Please help to resolve this issue.
OUTPUT from Installation log:
INFO: Start output from spawned process:
INFO: INFO:
INFO: /oracle/app/oracle/product/crs/bin/genclntsh
INFO: /usr/bin/ld: cannot find -lxl
INFO: collect2: ld returned 1 exit status
INFO: genclntsh: Failed to link libclntsh.so.10.1
INFO: make:
INFO: *** [client_sharedlib] Error 1
INFO: End output from spawned process.
INFO: INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'client_sharedlib' of makefile '/oracle/app/oracle/product/crs/network/lib/ins_net_client.mk'. See '/oracle/app/oracle/oraInventory/logs/installActions2011-12-26_04-40-48PM.log' for details.
Exception Severity: 1
INFO: Exception handling set to prompt user with options to Retry Ignore
SYSTEM:
IBM power server
Linux 5.3
I have already tried changing ORACLE_HOME,CRS_HOME,LD_LIBRARY_PATH but nothing worked.
Regards,
Prajash

Those errors remind me on errors I encountered when I was trying to do installation that was not certified,
so try to check if installation you are doing is actually supported.
In the meantime , visit metalink and read document [ID 460969.1] , */usr/bin/ld: Cannot Find -lxml10, Genclntsh: Failed To Link Libclntsh.so.10.1*

Oracle 10G RAC - Public & Heartbeat on 1 NIC

Hello all,
actually I am installing Oracle 10G RAC on rhel 4 (4 node cluster). But the Cluster Verification Utility aborts with errors. I checked the configToolAllCommands and tried to run the failed commands manually:
#/opt/oracle/crs/bin/oifcfg setif -global eth0.100/172.18.0.0:cluster_interconnect eth0.728/172.16.128.0:public eth0.498/172.17.1.0:cluster_interconnect
PRIF-50: duplicate interface is given in the input
PRIF-50: duplicate interface is given in the input
PRIF-50: duplicate interface is given in the input
Question:
Is it possible to put Public & Heartbeat on one NIC (eth0.728 & eth0.498)
If not is their any workaround for that issue?
Output /etc/hosts
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
172.18.253.48 eu0266.[company].net cfmaster
172.16.128.11 eu0200.[company].net eu0200
172.16.128.12 eu0201.[company].net eu0201
172.16.128.13 eu0202.[company].net eu0202
172.16.128.14 eu0203.[company].net eu0203
172.18.13.11 eu0200m.[company].net eu0200m
172.18.13.12 eu0201m.[company].net eu0201m
172.18.13.13 eu0202m.[company].net eu0202m
172.18.13.14 eu0203m.[company].net eu0203m
# Private section
172.17.1.11 eu0200-priv.[company].net eu0200-priv
172.17.1.12 eu0201-priv.[company].net eu0201-priv
172.17.1.13 eu0202-priv.[company].net eu0202-priv
172.17.1.14 eu0203-priv.[company].net eu0203-priv
# Virtual section
172.16.128.16 eu0200-vip.[company].net eu0200-vip
172.16.128.17 eu0201-vip.l[company].net eu0201-vip
172.16.128.18 eu0202-vip.[company].net eu0202-vip
172.16.128.19 eu0203-vip.[company].net eu0203-vip
Output install log:
Checking existence of VIP node application (required)
Check failed.
Check failed on nodes:
eu0203,eu0202,eu0201,eu0200
Checking existence of ONS node application (optional)
Check ignored.
Checking existence of GSD node application (optional)
Check ignored.
Post-check for cluster services setup was unsuccessful on all the nodes.
Command = /opt/[company]/oracle/crs/bin/cluvfy has failed
INFO: Configuration assistant "Oracle Cluster Verification Utility" failed
*** Starting OUICA ***
Oracle Home set to /opt/[company]/oracle/crs
Configuration directory is set to /opt/[company]/oracle/crs/cfgtoollogs. All xml files under the directory will be processed
INFO: The "/opt/[company]/oracle/crs/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
Thanks in advance for your help!
Regards

Tads wrote:
Hi all,
I have a question about Oracle RAC and network interface.
We're using Oracle 10gR2 RAC with two nodes on Linux Red Hat.
Let's assume that the public network interface goes down.
I would like to know what happens with existing connections
on node with network interface with problems.
Are connections frozen, actives?
Can the users continue to use theses existing connections using the another node of RAC?If the interface is down? what do you think? All connections to this node will die. How does your application handle fail-over, does it attempt to reconnect or just have a complete application failure?
You should spend some time in a test lab where you can test this stuff for yourself. Read the documentation and there are tons of sites out there that purport to have all of your RAC/TAF/FAN/FAF questions. - I would read and trust the documentation first.
>
I know that the listener goes down and any other connections is allowed.
Thank you very much!!!!

Oracle 10g RAC on Windows

Installed Oracle 10g RAC on Windows... Everything was
working fine, now when I install CRS it completed at 100% and then in the configuration it gives error
INFO: exitonly tools to be excuted passed: 0
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat
PROT-1: Failed to initialize ocrconfig
Step 1: checking status of CRS cluster
Step 2: creating directories (C:\oracle\product\10.2.0\crs)
Step 3: configuring OCR repository
ocr upgrade failed with (-1)
Execution of the plugin was aborted
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" was canceled.
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
I am using VMware WorkStation 5
http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnWindows2003UsingVMware.php
I can see my disks from both machines. Open the "Computer Management" dialog (Start > All Programs > Administrative Tools > Computer Management
I use Windows XP SP2 as the host operating system
Any suggestion?
Message was edited by:
MEXMAN

You know its not certified?
My first thought when I read the subject of this thread, and before reading what you posted, is that you've either done no research on RAC or didn't understand what you've read.
You can create a RAC cluster using any operating system certified by Oracle.
But the operating system is the least important part of creating a cluster. The questions you need to be able to address are:
1. What is your solution to created shared storage?
2. What is your solution to create the cache fusion interconnect and VIPs?
If you don't have an answer to these questions you can not build a RAC cluster.

Oracle 10g RAC 2节点不定期重启

Oracle 10g RAC 2节点不定期重启
oracle数据库版本10.2.0.5，两个节点的RAC， AIX 6.1 + PowerHA 5.5
近期2节点操作系统不定期重启，表象是心跳网络出了问题，但查找不到具体原因，
但我发现了一个奇怪的问题
$ crsctl get css misscount
600
但ocssd.log里却显示是30s
[    CSSD]2013-04-07 15:38:51.837 [1029] >TRACE: clssnm_skgxninit: HACMP clusterware detected
[    CSSD]2013-04-07 15:38:52.840 [1] >TRACE: clssnmNMInitialize: misscount set to (30)
[    CSSD]2013-04-07 15:38:52.841 [1] >TRACE: clssnmStartNM: reboottime set to (3) sec
[    CSSD]2013-04-07 15:38:52.841 [1] >TRACE: clssnmNMInitialize: Network heartbeat thresholds are: impending reconfig 15000 ms, reconfig start (misscount) 30000 ms
按Oracle的说法，使用第三方的集群软件，misscount为600s，
请教大家，crs的这个misscount，启动的时候，是在哪儿读取的？为什么会出现值不一致呢？

没人气，简直是鬼坛

Oracle 10g RAC to 11g RAC Upgrade on Solaris

Hi,
We are planning to do a migration of a 4 Node Oracle 10g RAC on Solaris 9 to 11g with Solaris 10. We'd like know what would be the best path to take. We cannot afford any downtime!
Options: Are these feasible? Which option is best? Any documents links?
a) Do a rolling upgrade of Oracle from 10g to 11g. Then take down individual nodes and upgrade the Solaris OS from 9 to 10 and bring them up back into the cluster. Is there any known issues taking this path? Is a rolling upgrade like this possible?
b) Do an upgrade of the Solaris OS from 9 to 10 on each node and then bring them back up? Is this practical? Does Oracle allow different versions of OS running on different nodes?
c) Use Dataguard with 2 different RAC environments (2 nodes each). How would this work? Is it the only possible way? Any steps please?
Thanks

a) Do a rolling upgrade of Oracle from 10g to 11g. Then take down individual nodes and upgrade the Solaris OS from 9 to 10 and bring them up back into the cluster. Is there any known issues taking this path? Is a rolling upgrade like this possible?Hi,
first of all i would not change several components (OS, database version) at a time. My recommendation is to make small steps and start with the operating system first. Seconds recommendation is to test and test everything in your dev or test environment prior doing the upgrades in the productive environment. Trust me: You will face problems :-) So you better try it beforehand!
b) Do an upgrade of the Solaris OS from 9 to 10 on each node and then bring them back up? Is this practical? Does Oracle allow different versions of OS running on different nodes?As far i know you can run different operating system versions on different nodes if they are supported (Solaris 9 and 10 are).
Ronny Egner
My blog: http://ronnyegner.wordpress.com

Oracle-10g RAC on VMware installed on Windows-7(Host)

Hi,
My host OS is Windows-7. Docs. posted on this forum for RAC on VMware says: your Host OS should be Centos OS and in which you will install VMware and Client tools also. In this way u can clone another RAC2 machine.
But I have Oracle VM Virtual Box installed on Windows-7. Another is VMware Player installed on Windows-7.
I want to install Oracle-10g RAC on my Laptop. Please any suggestions or Docs. related to this.
Shakeel

Hi,
while this is a documentation of 11gR2 it gives enough information on how to setup a RAC in a VBox environment:
http://www.oracle-base.com/articles/11g/OracleDB11gR2RACInstallationOnOEL5UsingVirtualBox.php
Regards
Sebastian

Migrating VB Applications on SQL Server to Oracle Forms on Oracle 10g RAC

Hello All,
I am looking at migrating a VB application built on a SQL Server database across to an Oracle Forms deployment with the data migrated to an Oracle 10g RAC database environment.
My first question is whether the SQL Developer Migration Workbench can migrate the SQL Server data to a RAC environment?
The second question is to ask whether there are any "toolkits" or tips from the community migrating VB applications to Oracle Forms.
Any advise or suggestions greatly accepted.
Kind Regards,
Gary.

SQL Developer Migration Workbench definitely can migrate SQL Server data to Oracle RAC setup.
However, I don't think VB application can be easily converted to Oracle Forms.
You can post your question in Oracle Form forum to double check.

Does managing Oracle 10g RAC with ASM require full root access?

We currently have three entirely separate support areas, Unix, Storage and DBA. We're now considering using Oracle 10g RAC with ASM and as part of the assessment trying to work out if we can still draw similar support boundaries. I know that installing RAC and configuring ASM requires root access but will DBA continue to need root access to manage & support RAC? If so, does anyone know if the commands they need can be RBAC'd or if we just need to share root access going forwards. I've had a look at a number of docs including http://download.oracle.com/docs/cd/B19306_01/rac.102/b14197/toc.htm. which is fairly informative but none of them seem to mention the requirement for root access on Solaris. I'm guessing they just assume that it's available, but that's not generally the case in our environment.
All advice / info welcome!

I would have thought that the only reason you would need root access once RAC and ASM had been set up would be to add more disks to the ASM configuration. This would be needed to change the ownership on the raw LUNs or to make additions to metasets (SVM/Oban) or diskgroups (VxVM/CVM). Beyond that, I can't imagine needing root access.
I'm sure others will chime in if they can think of other reasons!
Regards,
Tim
Edited by: Tim.Read on Jun 3, 2008 2:25 AM

Log Directories in Oracle 10g RAC environment

Similar Messages

Maybe you are looking for