Log failed issues in continuously

hi team,
on few of my production servers continuously we are getting the below error message in sql server error log,
can please resolve this and how we stop the this kind of errors.
SSPI handshake failed with error code 0x8009030c, state 14 while establishing a connection with integrated security;
the connection has been closed. Reason: AcceptSecurityContext failed. The Windows error code indicates the cause of failure.

how we can check the SPN configured properly or not?
Hi MSDN_12345,
According to your description, the error occurs when you create an ODBC connection from an application server to the SQL Server by using windows Authentication. If you want to check if the SPN for the SQL Server service account has been configured properly,
you can perform the following command in CMD for ensuring correct SPNs registered to the SQL Server.
SETPSPN – L Servername
There is a similar issue about SSPI handshake failed with error code 0x8009030c. You can review the following article.
http://dusk1911.wordpress.com/2011/07/18/sql-2008r2-sspi-handshake-failed-with-error-code-0x8009030c/
For more information about verifying the domain user SPN is registered correctly using the SetSPN command, see:http://technet.microsoft.com/en-us/library/bb735885.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Similar Messages

Log File Issue In SQL server 2005 standard Edition

We have database of size 375GB .The data file has 80 GB free space within .When trying to rebuild the index we had 450 GB free space on the disk where Log file is residing.The rebuild index activity failed due to space issue.added more space and got the
job done successfully
The Log file has grow up to 611GB to complete the rebuild index.
version :SQL server 2005 Standard Edition .Is ther a way to estimate the space required for rebuild index in this version.
I am aware we notmaly allocate 1.5 times of data file.But in this case It was totaly wrong.
Any suggestion with examples would be appreciated.
Raghu

OK, there's a few things here.
Can you outline for everybody the recovery model you are using, the frequency with which you take full, differential and transaction log backups.
Are you selectively rebuilding your indexes or are you rebuilding everything?
How often are you doing this? Do you need to?
There are some great resources on automated index maintenance, check out
this post by Kendra Little.
Depending on your recovery point objectives I would expect a production database to be in the full recovery mode and as part of this you need to be taking regular log backups otherwise your log file will just continue to grow. By taking a log backup it will
clear out information from inactive VLF's and therefore allow SQL Server to write back to those VLF's rather than having to grow the log file. This is a simplified version of events, there are caveats.
A VLF will be marked as active if it still has an open transaction in it or there is a HA option that still requires that data to be available as that data has not been copied to another node yet.
Most customers that I see take transaction log backups every 15 - 30 minutes, but this really does depend upon how much data your company can afford to lose. That's another discussion for another day.
Make sure that you take a transaction log backup prior to your job that does your index rebuilds (hopefully a smart job not a sledge hammer job).
As mentioned previously swapping to bulk logged can help to reduce the size of the amount of information logged during index rebuilds. If you do this make sure to swap back into the full recovery model straight after and perform a full backup. There are
problems with the ability to do point in time restores whilst in the bulk logged recovery model, so you need to reduce the amount of time you use it.
Really you also need to look at how your indexes are created does the design of them lead to them being fragmented on a regular basis? Are they being used? Are there better indexes out there that can help performance?
Hopefully that should put you on the right track.
If you find this helpful, please mark the post as helpful,
If you think this solves the problem, please propose or mark it an an answer.
Please provide details on your SQL Server environment such as version and edition, also DDL statements for tables when posting T-SQL issues
Richard Douglas
My Blog: Http://SQL.RichardDouglas.co.uk
Twitter: @SQLRich

IMac 27" Late 2013 Wi Fi Log in Issue

Hello everyone,
I apologize if my questions have been asked in the past. I'm completely new to the Apple Mac OS. I bought a new iMac 27" in the middle of 2014 and use it about once or twice a week and have had no issues to-date. I'm still in the process of learning though so my use of it is limited to basic emailing, web browsing and Skype.
In the last 2 weeks I have had problems logging into my Wifi network at home. It would not log on even after I had reset the modem. After trying and rebooting my iMac 3-4 times it would finally do so without changing anything in the it. I'm not sure what is causing it, but thought I would ask here.
What would be causing the log in issue to my Wi Fi network?
Do I need to be concern with the findings in the Etre check?
Startup after logging in my password would take longer than usual...what would be causing it?
Here is the result from the Etre scan. I guess what concerns me is in red...and also if it shows the Wi Fi log in issue.
Thank you in advance for your help and advice.
EtreCheck version: 2.1.8 (121)
Report generated 9 February 2015 11:23:18 am AEST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    iMac (27-inch, Late 2013) (Technical Specifications)
    iMac - model: iMac14,2
    1 3.4 GHz Intel Core i5 CPU: 4-core
    32 GB RAM Upgradeable
        BANK 0/DIMM0
            8 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            8 GB DDR3 1600 MHz ok
        BANK 0/DIMM1
            8 GB DDR3 1600 MHz ok
        BANK 1/DIMM1
            8 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en1: 802.11 a/b/g/n/ac
Video Information: ℹ️
    NVIDIA GeForce GTX 780M - VRAM: 4096 MB
        iMac 2560 x 1440
System Software: ℹ️
    OS X 10.9.5 (13F34) - Time since boot: 0:24:23
Disk Information: ℹ️
    APPLE SSD SD0128F disk0 : (121.33 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Boot OS X (disk0s3) <not mounted> : 134 MB
        Macintosh HD (disk2) / : 1.11 TB (1.04 TB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 120.99 GB Online
            Core Storage: disk1s2 999.35 GB Online
    APPLE HDD ST1000DM003 disk1 : (1 TB)
        EFI (disk1s1) <not mounted> : 210 MB
        Recovery HD (disk1s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk2) / : 1.11 TB (1.04 TB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 120.99 GB Online
            Core Storage: disk1s2 999.35 GB Online
USB Information: ℹ️
    VIA Labs, Inc.          USB3.0 Hub
        VIA Labs, Inc.          USB3.0 Hub
            Seagate Backup+ SL 2 TB
        EFI (disk3s1) <not mounted> : 210 MB
        Seagate Backup Plus Drive (disk3s2) /Volumes/Seagate Backup Plus Drive : 2.00 TB (1.82 TB free)
        Recovery HD (disk3s3) <not mounted> [Recovery]: 650 MB
            Initio   INIC-3609
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Logitech Inc. Logitech USB Headset H340
    Apple, Inc. Keyboard Hub
        Apple Inc. Apple Keyboard
    VIA Labs, Inc.          USB2.0 Hub
        VIA Labs, Inc.          USB2.0 Hub
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Startup Items: ℹ️
    ProTec6b: Path: /Library/StartupItems/ProTec6b
    Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
    [loaded]    com.google.keystone.agent.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.bombich.ccc.plist [Click for support]
    [loaded]    com.google.keystone.daemon.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
    [failed]    com.spotify.webhelper.plist [Click for support]
    [not loaded]    jp.co.canon.Inkjet_Extended_Survey_Agent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Alfred 2    Application (/Applications/Alfred 2.app)
    Spotify 08-26-32-444    Application (/Users/[redacted]/.Trash/Spotify 08-26-32-444.app)
    Dropbox    Application (/Applications/Dropbox.app)
    Canon IJ Network Scanner Selector EX    Application Hidden (/Applications/Canon Utilities/IJ Network Scanner Selector EX/Canon IJ Network Scanner Selector EX.app)
    Speech Startup    Application (/System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogn ition.framework/Versions/A/Speech Startup.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 16.0.0.296 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    Flash Player: Version: 16.0.0.296 - SDK 10.6 Outdated! Update
    EPPEX Plugin: Version: 3.0.5.0 [Click for support]
    Default Browser: Version: 537 - SDK 10.9
    SharePointBrowserPlugin: Version: 14.4.3 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.20125.0 - SDK 10.6 [Click for support]
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
Time Machine: ℹ️
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 1.11 TB Disk used: 75.54 GB
    Destinations:
        Seagate Backup Plus Drive [Local]
        Total size: 2.00 TB
        Total number of backups: 33
        Oldest backup: 2014-04-16 03:45:27 +0000
        Last backup: 2015-02-09 01:07:51 +0000
        Size of backup disk: Adequate
            Backup size 2.00 TB > (Disk used 75.54 GB X 3)
Top Processes by CPU: ℹ️
         3%    WindowServer
         2%    Safari
         2%    Google Chrome
         1%    fontd
         1%    coreaudiod
Top Processes by Memory: ℹ️
    481 MB    WindowServer
    309 MB    Airmail
    206 MB    mds_stores
    206 MB    Safari
    172 MB    Google Chrome
Virtual Memory Information: ℹ️
    27.13 GB    Free RAM
    4.39 GB    Active RAM
    1.08 GB    Inactive RAM
    1.75 GB    Wired RAM
    912 MB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Feb 9, 2015, 10:58:33 AM    Self test - pass

Hi, Jiyujin.
Thank you for visiting Apple Support Communities.
I would need some clarification of the reference to log on and a little more information about the behavior to provide a better answer. However, here is a troubleshooting article that may help.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/HT202222
Cheers,
Jason H.

LION screen sharing and remote log in issues

Hi,
In Snow Leopard I could access my iMac screen from my macbook and have the iMac restart and allow me to log in and continue to use the iMac.
In Lion I cannot access the log in screen remotely after a restart.
I need to go to the iMac and actually log into it with the keyboard before it will show up again on the network.
I tried to adjust the sharing preferences but nothing is allowing me to manage the iMac and restart it from a different machine.
Once I am logged in the screen sharing works fine. It's the log in issue that is not working for me.
thanks for any help in advance,
christos

i have not been able to get screen sharing to work at all, which has never been a problem for me. i'm registered as an authorized user on both computers, the passwords are correct, but it keeps telling me that the username/passwords don't work. and this is after the computers have already been "connected" using the exact same passwords and user name.

HT201320 PLEASE HELP - I changed my email password on my computer...the email is also on my iPad...I can log on the computer with the 'new' password, however, the iPad is not allowing me to log in. I continue to get the incorrect password message. Pleas

PLEASE HELP - I recently changed my email password on my computer...the email is also on my iPad. I can log on the computer with the 'new' password, however, the iPad is not allowing me to log in. I continue to get the 'incorrect password' message. Please advise.

I'm sorry you're having issues with your e-mail account on your phone Rusty1112. Let's figure out what's going on. First, please try deleting account/information again and then restart phone. When phone is back on, try adding e-mail account again, and be sure you're entering exactly as you set up, meaning its case-sensitive. If you're still getting same error, please let us know and let us know what e-mail account it is, Yahoo, AOL, MSN, etc.
Thank you,
VanessaS_VZW
Follow us on Twitter @VZWSupport

While Installation of 11g database creation time error ORA-28056: Writing audit records to Windows Event Log failed Error

Hi Friends,
OS = Windows XP 3
Database = Oracle 11g R2 32 bit
Processor= intel p4 2.86 Ghz
Ram = 2 gb
Virtual memory = 4gb
I was able to install the oracle 11g successfully, but during installation at the time of database creation I got the following error many times and I ignored it many times... but at 55% finally My installation was hanged nothing was happening after it.....
ORA-28056: Writing audit records to Windows Event Log failed Error and at 55% my Installation got hung,,,, I end the installation and tried to create the database afterward by DBCA but same thing happened....
Please some one help me out, as i need to install on the same machine .....
Thanks and Regards

AAP wrote:
Thanks Now I am able to Create a database , but with one error,
When I created a database using DBCA, at the last stage I got this error,
Database Configuration Assistant : Warning
Enterprise Manager Configuration Failed due to the Following error Listener is not up or database service is not registered with it. Start the listener & Registered database service & run EM Configuration Assistant again....
But when I checked the listener was up.....
Now what was the problem, I am able to connect and work through sqlplus,
But I didnt got the link of EM and when try to create a new connection in sql developer it is giving error ( Status : failure - Test Failed the Network Adapter could not establish the connection )
Thanks & Regards
Creation of the dbcontrol requires a connection via the listener. When configuring the dbcontrol as part of database creation, it appears that the dbcontrol creation step runs before the dynamic registration of the databsase with the listener is complete. Now that the database itself is completed and enough time (really, just a minute or two) has passed to allow the instance to register, use dbca or emca to create the dbcontrol.
Are you able to get a sqlplus connection via the listener (sqlplus scott/tiger@orcl)? That needs to be the first order of business.

Send mail to the user who logged the issue

Hi,
As it is currently the mail goes to the key user, which is a business partner. That is an organization. However several users are maintained under a business partner.
So now the mail goes to all these users at a status change. However can we only have the user who logged the issue getting the mail. Can you please advice me on how to get this?
Thanks loads.
Keshi

Hi.. Thanks for all ur replies..
Yes we hv assigned the key user as a business partner which is an organization,, This is also and requirement,
But since the mail is activated as to the key user it goes to all the users in that group, under teh business partner.
But when configuring this came across the Partner, in which we selected it as key user. But there were also other partners as Creator,Reported by etc..
I tried using both these but again it didnt work. Can anyone suggest anything?
Yes, when u assign the key user as a business partner and assign several users to it you can send multiple mails to users
Any help on this is very much appreciated,.,
Thanks all for replying once again.
Keshi

Enterprise Portal Log off Issue for External User

Hello
We are facing a Enterprise Portal log off issue for one of our external users.
User is logged in and clicks on the "Log Off" link .
User is prompted as seen below:
Are you sure you want to logg off?
Choose Yes or No
Click on Yes and popup window goes away and nothing else happens.
These problems logg off issue problem happening on Internet Explorer 6 but from from firefox browser, its working.
Also popups are not blocked on IE.
EP version with SP level is EP 7.00 SP12.
Even though from Internet explorer 6, i can log in and log off with internal user.
Please advise for the log off problem .

Hello
I added the value ume.logoff.redirect.url =https://poqwas.synenco.com/irj/portal
on Config Tool Global Paramter settings.
Then restart the server.
But I am getting the same problem.when I login with external user ID, then make log off. Nothin Happen...
Please advise

Pass/Fail issue with Quiz and Click Buttons

Got a complicated one for ya!
I have a project that has about 100 quiz questions. I want to add slides with an image for backgrownd, a voice over and a "Click Button" to be used like a Simulation. If the "Click Button" is not clicked on, I want the slide to act like a Quiz and be marked as wrong.
At the end of the Quiz I want the Pass/Fail function to be: If Pass: "Continue" then if Fail "Jump to Slide". This Failed Slide would jump to the last slide; the end of the project with a "Thank you". If Passed, the project continues to display more information on other slides.
The tests I have done the Pass/Fail seems to not be working. If failed, the project continues just like the Passed even though the "Pass/Fail" options are marked correctly.
What do you think?

Also check the options under Quiz > Settings > Required. It could be that you have it set to something other than Optional which might be restricting things.

Determination of file status for /oracle/SID/102_64/rdbms/admin/log failed

Hello all,
When using brtools, the following error pops up. Appreciate if you could share some hints. thanks.
> brtools
BR0651I BRTOOLS 7.00 (43)
BR0252E Function stat() failed for '/oracle/QAA/102_64/rdbms/admin/log' at location BrFileStatGet-1
BR0253E errno 13: Permission denied
BR0273E Determination of file status for /oracle/QAA/102_64/rdbms/admin/log failed
BR0280I BRTOOLS time stamp: 2010-05-07 14.20.41
BR0654I BRTOOLS terminated with errors
Kind regards
Raymond

>
Raymond Yuan wrote:
> BR0252E Function stat() failed for '/oracle/QAA/102_64/rdbms/admin/log' at location BrFileStatGet-1
> BR0253E errno 13: Permission denied
>
Hello,
now this message is pretty obvious. So the needed information would be:
ls -ld /oracle/QAA/102_64/rdbms/admin
ls -ld /oracle/QAA/102_64/rdbms/admin/log
ls -ld brtools
id
and then compare if the user executing brtools has appropiate rights.
Most likely you did not run saproot.sh so brtools might not be set suid to oraqaa
and you are executing as qaaadm.
Best regards
Volker

Dreamweaver log in issues

Is there anyone experiencing log in issues to B.C. through Dreamweaver? My log in issue started about a few hours ago. I can log in directly to B.C., but when I try to log in using the same name and password that I've always used, I can't log in.

Hey Legacys7, please PM me your login details and I'll test this for you. If you can access admin you should be able to log in to BC Extension. It's using the same auth system.
Cheers,
mario

Server certificate verification failed: issuer is not trusted

Tried to sign in to a couple of websites lately and got this message:
Server certificate verification failed: issuer is not trusted
What is going on and how do you fix?

hello, unfortunately this is an issue caused by the website, which uses an intermediary certificate but doesn't properly [https://www.ssllabs.com/ssltest/analyze.html?d=https%3A%2F%2Fphp.net%2F&hideResults=on implement a trusted path to the root certificate authority].
in order to work around that you'd have to manually install the missing certificate and trust it to verify websites in firefox: https://ssl-tools.net/certificates/a1e08f9a6a21691dc96bc3b9fa59a7cadd6d4cc4.pem

Facetime and Message log in issue

Hi to all,
I would like to seek your assistance with the Facetime and message log in issue that I am having.
I recently installed the Mountain Lion OS 10.8, now using version 10.8.2, on my personal laptop, Macbook Pro (Mid-2009 model). I have tried many times to log into both applications via my Apple ID but have been unsuccessful.
This afternoon I tried accessing Facetime on my work laptop (Macbook 2010 model, OS Lion 10.7.5) via my Apple ID and it worked.
Can someone please help me in resolving my log in issue with my personal laptop? Much appreciated.
Kind Regards,
Wing Kuen

I would make sure you are logged into iCloud in the System Preference pane, "Icloud".
Then go the the indivusial prefrences of Facetime and Messages, and try to log in.
Hope this helps!

Exchange 2013 SP1 - The attempt to search the administrator audit log failed.

During migration process from Exchange 2010 to 2013, after moving Arbitration mailbox from Exchange 2010 database to Exchange 2013 SP1 database, cmdlet Search-AdminAuditLog fails with following error.
The attempt to search the administrator audit log failed. Please try again later.
+ CategoryInfo : NotSpecified: (:) [Search-AdminAuditLog], AdminAuditLogSearchException
+ FullyQualifiedErrorId : [Server=EX2013,RequestId=517873e3-a623-4363-bfdc-e5aa23595c33,TimeStamp=29. 4. 2014
8:38:37] [FailureCategory=Cmdlet-AdminAuditLogSearchException] 2774D0CF,Microsoft.Exchange.Management.SystemConfig
urationTasks.SearchAdminAuditLog
+ PSComputerName : ex2013.domainname.local

Hi,
First, please make sure the Microsoft Exchange Search and the Microsoft Exchange Search Host Controller service are running and please run the get-mailbox -arbitration cmdlet to check the result.
Besides, please check the properties of the DiscoverySearchMailbox and verify that the homeMDB attribute is set to a mounted database.
If the steps above don't work, please try to re-create a new Discovery System Mailbox to check the result. You can refer to the following article.
Re-Create the Discovery System Mailbox
http://technet.microsoft.com/en-gb/library/gg588318(v=exchg.150).aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Track & log failed jobs on Report Server 9.0.4

Hi
Oracle Reports Services 9.0.4 on Windows
i'm trying to figure out how to log failed jobs , so i can automate it and send it to developers
the problem is , how dose showjobs display the job ids with the ohs logs info
http://localhost:7777/reports/rwservlet/showjobs?
i can collect the job IDs with the "Terminated with error" from the rwserver.trc
but how do i connect these jobs with the actual RDF, pdf entries in the apache log
or maybe logs
for example , so i can track the failed requests with their respective parameters
any ideas ?
thanks

thanks desgard
that info is totally great and all , i even found this link that may help others with Notification
http://www.oracle.com/technology/products/reports/apis/plugNotification/NOT_3.html
but i don't want to send a msg for each run & i need to alter the URL format to use this feature in the rwservlet
but that's not what i want , i want to filter the trace log (rwserver.trc) & extract the History of failed jobs for the past month or so
i can get the list of jobs , example
"Job 104870 status is: Terminated with error:"
how can i connect the job IDs with their URL Requests

Log failed issues in continuously

Similar Messages

Maybe you are looking for