Log file (access.log) of the internal ITS
Hello,
anybody know how to access the logfiles of the internal ITS. In particularly im looking for the log file access.log which you had for the external ITS accessable over the ITS admin page http://<servername>/scripts/wgate/admin/!
The log file loged all users and the transaction they accessed over the time in the format
2006/10/21 18:39:16.093, 0 #197349: IP ???.???.???.???, -its_ping
Thanks in advance,
Kai Mattern
hi
good
go through these links, i hope these ll help you to solve your problem.
http://www.hp.com/hpbooks/prentice/chapters/0130280844.pdf
http://help.sap.com/saphelp_46c/helpdata/en/5d/ca5237943a1e64e10000009b38f8cf/content.htm
thanks
mrutyun^
Similar Messages
-
Disappear Log file(access log).. humm..
DS5.1sp1 on SunOS 8
suddenly access log was disappear about two month ago.
so, log file is only 2 ~ 3 exist.
why? Any solutions? PleaseWhat is the configuration of your log files?
What are your configured
- maximum number of logs?
- total log size?
- oldest log file?
Check this first. -
Cannot rotate HTTP Log File (access.log)
Hi,
Both rotation types(size and date) cannot be rotated.
For size, I set the "Maximum Log File Size" to 1000k,
but the file is 3000K now and still increasing.
For date, I set teh "Rotation Period" to 1440 minutes,
but the file still cannnot rotate after few days.
Does any one know the problem?
ThanksIt is a reported bug in 6.0.
Is it fixed in 8.1.0 -
Archived log files not registered in the Database
I have Widows Server 2008 R2
I have Oracle 11g R2
I configured primary and standby database in 2 physical servers , please find below the verification:
I am using DG Broker
Renetly I did failover from primary to standby database
Then I did REINSTATE DATABASE to returen the old primary to standby mode
Then I did Switchover again
I have problem that archive logs not registered and not imeplemented.
SQL> select max(sequence#) from v$archived_log;
MAX(SEQUENCE#)
16234
I did alter system switch logfile then I ssue the following statment to check and I found same number in primary and stanbyd has not been changed
SQL> select max(sequence#) from v$archived_log;
MAX(SEQUENCE#)
16234
Any body can help please?
RegardsThanks for reply
What I mean after I do alter system switch log file, I can see the archived log files is generated in the physical Disk but when
select MAX(SEQUENCE#) FROM V$ARCHIVED_LOG;
the sequence number not changed it should increase by 1 when ever I do switch logfile.
however I did as you asked please find the result below:
SQL> alter system switch logfile;
System altered.
SQL> /
System altered.
SQL> /
System altered.
SQL> /
System altered.
SQL> SELECT DB_NAME,HOSTNAME,LOG_ARCHIVED,LOG_APPLIED_02,LOG_APPLIED_03,APPLIED_TIME,LOG_ARCHIVED - LOG_APPLIED_02 LOG_GAP_02,
2 LOG_ARCHIVED - LOG_APPLIED_03 LOG_GAP_03
3 FROM (SELECT NAME DB_NAME FROM V$DATABASE),
4 (SELECT UPPER(SUBSTR(HOST_NAME, 1, (DECODE(INSTR(HOST_NAME, '.'),0, LENGTH(HOST_NAME),(INSTR(HOST_NAME, '.') - 1))))) HOSTNAME FROM V$INSTANCE),
5 (SELECT MAX(SEQUENCE#) LOG_ARCHIVED FROM V$ARCHIVED_LOG WHERE DEST_ID = 1 AND ARCHIVED = 'YES'),
6 (SELECT MAX(SEQUENCE#) LOG_APPLIED_02 FROM V$ARCHIVED_LOG WHERE DEST_ID = 2 AND APPLIED = 'YES'),
7 (SELECT MAX(SEQUENCE#) LOG_APPLIED_03 FROM V$ARCHIVED_LOG WHERE DEST_ID = 3 AND APPLIED = 'YES'),
8 (SELECT TO_CHAR(MAX(COMPLETION_TIME), 'DD-MON/HH24:MI') APPLIED_TIME FROM V$ARCHIVED_LOG WHERE DEST_ID = 2 AND APPLIED = 'YES');
DB_NAME HOSTNAME LOG_ARCHIVED LOG_APPLIED_02 LOG_APPLIED_03 APPLIED_TIME LOG_GAP_02 LOG_GAP_03
EPPROD CORSKMBBOR01 16252 16253 (null) 15-JAN/12:04 -1 ( null) -
Errors in a log file /var/log/system.log
I'm getting these errors in a log file /var/log/system.log
Shutdown:
Sep 21 12:41:38 Mac-mini.local WindowServer[86]: CGXGetConnectionProperty: Invalid connection 42243
Sep 21 12:41:38 Mac-mini.local coreservicesd[58]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=145
Sep 21 12:41:38 Mac-mini.local WindowServer[86]: CGXGetConnectionProperty: Invalid connection 42243
Sep 21 12:41:38 Mac-mini.local coreservicesd[58]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to Sep 21 12:41:38 Mac-mini.local loginwindow[41]: DEAD_PROCESS: 41 console
Sep 21 12:41:38 Mac-mini.local WindowServer[86]: CGXGetConnectionProperty: Invalid connection 42243
Sep 21 12:41:38 Mac-mini.local coreservicesd[58]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=142
Sep 21 12:41:38 Mac-mini.local shutdown[300]: halt by andrei:
Boot & Working:
Sep 21 12:42:11 localhost com.apple.launchd[1] (com.apple.automountd): Unknown key for boolean: NSSupportsSuddenTermination
Sep 21 12:42:22 Mac-mini.local apsd[56]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
Sep 21 12:42:26 Mac-mini.local authorizationhost[121]: in od_principal_for_user(): failed: 7
Sep 21 12:42:26 Mac-mini.local authorizationhost[121]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
Sep 21 12:42:27 Mac-mini.local loginwindow[41]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
Sep 21 12:42:31 Mac-mini.local XProtectUpdater[24]: Ignoring new signature plist: Not an increase in version
Sep 21 12:42:32 Mac-mini com.apple.launchd[1] (com.apple.xprotectupdater[24]): Exited with code: 252
Sep 21 12:43:04 Mac-mini.local com.apple.security.pboxd[290]: Bug: 12C54: liblaunch.dylib + 23849 [2F71CAF8-6524-329E-AC56-C506658B4C0C]: 0x25
Sep 21 12:53:49 Mac-mini.local CVMServer[98]: Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
Sep 21 12:59:48 Mac-mini.local com.apple.security.pboxd[290]: kCGErrorFailure: CGSSetHideOnDeact: error getting window tags
Sep 21 13:00:07 Mac-mini.local com.apple.security.pboxd[290]: _NXTermWindow: error releasing window (1000)
Sep 21 13:00:07 Mac-mini.local com.apple.security.pboxd[290]: __block_global_2: connection failed unexpectedly; terminating process; delegate was (
system.log - https://docs.google.com/open?id=0Bz5zKwys0GTcSzI5UFJRUzFxZjQFile a bug report with Apple.
-
How to view file access log (AFP) on Mac OS X Lion (10.7) server?
I want to track the files beeing uploaded and downloaded or deleted on the shares on the server by different users. There has to be some log where the Mac OS writes an entry for every file access (like upload / download / rename / delete) for each user. How can I access it? How can I filter the actions by user account? Do I have to first activate such a logging or is it activated from the first (standard) setup of the Mac OS X Lion server?
try:
sudo serveradmin settings afp:activityLog=yes
then the log entries should be at
/Library/Logs/AppleFileService/AppleFileServiceAccess.log -
How do you get rsync to output a log file - don't understand the MAN pages sorry
Hi There,
Just trying to backup our web hosting server using rsync but can't figure out how to add a log file.
The MAN pages say to use the following syntax:
rsync -av --rsync-path="rsync --log-file=/tmp/rlog" src/ dest/
But when I add that log command into my call like this:
rsync -avz -e --rsync-path="rsync --log-file=/Users/username/rsync.log" ssh user@server:/home/ /Volumes/ServerVolume/webserver-backups/LIVE/home/
I get errors and the command won't run - obviously my syntax is wrong somehow.
Does anyone know how to add a log file to an rsync command?
Any help would be much appreciated.If that second example is your specific entry then the answer is obvious.
You need to more closely follow your quotes. All quotes have to be balanced (meaning that whenever you open a set of quotes there needs to be a matching close quote).
In your case you state:
rsync -avz -e --rsync-path="rsync --log-file=/Users/username/rsync.log"
Note how your quotes are arranged... you're telling rsync that --rsync-path is "rsync --log-file=/Users/username/rsync.log", and there's no surprise that it fails.
The correct format for this would be more like:
rsync -avz -e --rsync-path="rsync" --log-file="/Users/username/rsync.log"
(although I also question the validity of the --rsync-path command... are you sure that's right? because I'm not.
Beyond that, though, the file arguments are incorrect - or, at least, there's a superflous 'ssh' command that's snuck its way in there somehow... -
Shrink Log file in log shipping and change the database state from Standby to No recovery mode
Hello all,
I have configured sql server 2008 R2 log shipping for some databases and I have two issues:
can I shrink the log file for these databases: If I change the primary database from full to simple and shrink the log file then change it back to full recovery mode the log shipping will fail, I've seen some answers talked about using "No
Truncate" option, but as I know this option will not affect the log file and it will shrink the data file only.
I also can't create maintenance to reconfigure the log shipping every time I want to shrink the log file because the database size is huge and it will take time to restore in the DR site, so the reconfiguration
is not an option :(
how can I change the secondary database state from Standby to No recovery mode? I tried to change it from the wizard and wait until the next restore for the transaction log backup, but the job failed and the error was: "the step failed". I need
to do this to change the mdf and ldf file location for the secondary databases.
can any one help?
Thanks in advance,
Faris ALMasri
Database Administrator1. can I shrink the log file for these databases: If I change the primary database from full to simple and shrink the log file then change it back to full recovery mode the log shipping will fail, I've seen some answers talked about using "No Truncate"
option, but as I know this option will not affect the log file and it will shrink the data file only.
I also can't create maintenance to reconfigure the log shipping every time I want to shrink the log file because the database size is huge
and it will take time to restore in the DR site, so the reconfiguration is not an option :(
2. how can I change the secondary database state from Standby to No recovery mode? I tried to change it from the wizard and wait until the next restore for the transaction log backup, but the job failed and the error was: "the step failed". I need to do
this to change the mdf and ldf file location for the secondary databases.
can any one help?
Thanks in advance,
Faris ALMasri
Database Administrator
1. If you change recovery model of database in logshipping to simple and back to full Logshipping will break and logs wont be resored on Secondary server as log chain will be broken.You can shrink log file of primary database but why would you need that
what is schedule of log backup. Frequent log backup is already taking care of log files why to shrink it and create performance load on system when log file will ultimately grow and since because instant file initilaization is not for Log files it takes time
to grow and thus slows performace.
You said you want to shrink as Database size is huge is it huge or does it have lots of free space. dont worry about data file free space it will eventually be utilized by SQL server when more data comes
2. You are following wrong method changing state to no recovery would not even allow you to run select queries which you can run in Standby mode. Please refer below link to move Secondary data and log files
http://www.mssqltips.com/sqlservertip/2836/steps-to-move-sql-server-log-shipping-secondary-database-files/
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
MacbookPro Lion 10.7.5 - My macbook pro panics when i hit any key after an idle time.
I have disabled Sleep, I am usually connected to an external monitor and external keyboard.
I have already tried (Cmd+Option+R+P) and re-installing OS in safe mode with Apple Support, but, the problem persists.
Panic (system crashes) log:
Source: /Library/Logs/DiagnosticReports/Kernel_2013-04-27-093207_KAPILs-MacBook-Pro.pan ic
Size: 9 KB (9,275 bytes)
Last Modified: 29/04/13 12:59 PM
Recent Contents: Interval Since Last Panic Report: 9720 sec
Panics Since Last Report: 1
Anonymous UUID: CC17CCFF-11B4-4C5E-9AAF-5B6E2451277B
Sat Apr 27 09:32:07 2013
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f817355fb, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff806a540628, CR3: 0x0000000000100000, CR4: 0x00000000001606e0
RAX: 0xffffff7f81792320, RBX: 0x0000000000000000, RCX: 0x0000000000000000, RDX: 0x0000000000000008
RSP: 0xffffff807ed4bc80, RBP: 0xffffff807ed4bcb0, RSI: 0xffffff800bf09000, RDI: 0xffffff806a64f000
R8: 0x0000000000000000, R9: 0xffffff800bc95a80, R10: 0x8000000000100000, R11: 0xffffff80002dad00
R12: 0xffffff806a64f1c8, R13: 0xffffff806a53e000, R14: 0xffffff800bf09000, R15: 0xffffff806a64f000
RFL: 0x0000000000010286, RIP: 0xffffff7f817355fb, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffff806a540628, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff807ed4b930 : 0xffffff8000220792
0xffffff807ed4b9b0 : 0xffffff80002c4794
0xffffff807ed4bb60 : 0xffffff80002da55d
0xffffff807ed4bb80 : 0xffffff7f817355fb
0xffffff807ed4bcb0 : 0xffffff7f81734de7
0xffffff807ed4bce0 : 0xffffff7f817351bd
0xffffff807ed4bd10 : 0xffffff7f80cea832
0xffffff807ed4bd50 : 0xffffff7f817bd383
0xffffff807ed4bda0 : 0xffffff7f817bf692
0xffffff807ed4bde0 : 0xffffff7f817bf7c4
0xffffff807ed4be20 : 0xffffff7f80cee4c5
0xffffff807ed4be60 : 0xffffff7f80cee628
0xffffff807ed4be90 : 0xffffff7f80cf1fd7
0xffffff807ed4bef0 : 0xffffff800063d4d6
0xffffff807ed4bf30 : 0xffffff800063c250
0xffffff807ed4bf70 : 0xffffff800063c0f4
0xffffff807ed4bfb0 : 0xffffff8000820057
Kernel Extensions in backtrace:
com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80cdf000->0xffffff7f80d17fff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80889000
com.apple.driver.AppleIntelFramebufferCapri(7.3.2)[5D02E509-F60D-3312-9C3C-AF47 D6622C85]@0xffffff7f817b2000->0xffffff7f8180ffff
dependency: com.apple.iokit.IOACPIFamily(1.4)[19BAB11C-CE5E-3068-AD10-132019C59D6C]@0xfffff f7f807d4000
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80889000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80cdf000
com.apple.driver.AppleIntelHD4000Graphics(7.3.2)[AD64F3E5-2838-3046-A9EA-1CB6C9 769436]@0xffffff7f81732000->0xffffff7f81798fff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80889000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80d18000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80cdf000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
System uptime in nanoseconds: 15787869938998
last loaded kext at 79222085916: com.apple.filesystems.smbfs 1.7.2 (addr 0xffffff7f807f7000, size 241664)
last unloaded kext at 253257372652: com.apple.driver.AppleWWANSupport 2.5.4 (addr 0xffffff7f80c1a000, size 12288)
loaded kexts:
com.Symantec.kext.SAVAPComm 12.1
com.apple.filesystems.smbfs 1.7.2
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AGPM 100.12.75
com.apple.driver.X86PlatformShim 5.0.0d8
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleIntelHD4000Graphics 7.3.2
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleIntelFramebufferCapri 7.3.2
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AppleSDXC 1.2.2
com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AirPort.Brcm4331 561.7.22
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleUSBXHCI 1.1.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.X86PlatformPlugin 5.1.1d6
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.kext.triggers 1.0
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.0.3
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.8
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
System Profile:
Model: MacBookPro9,2, BootROM MBP91.00D3.B08, 2 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 2.2f38
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333235533643465238432D50422020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333235533643465238432D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.198.19.22)
Bluetooth: Version 4.0.8f17, 2 service, 11 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: TOSHIBA MK5065GSXF, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-8A8
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0x1a110000 / 3
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0x1d180000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x1d182000 / 6
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0x1d183000 / 5
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821d, 0x1d181300 / 8
USB Device: composite_device, 0x413c (Dell Inc.), 0x3010, 0x14100000 / 6
USB Device: Dell USB Keyboard, 0x413c (Dell Inc.), 0x2003, 0x14200000 / 5Since Norton modifies OS X your Mac is unable to function as designed.
Kernel panics are caused by defective hardware or software. Norton is in the latter category. -
Transaction log and access log
The transaction log (TransactionLogFilePrefix) and the access log are stored
relative to the directory where the server is started rather than where it
resides as with the rest of the log files. Why is this?
Eg.
I start the server with a batch file contained in
projects\bat
My server is in
projects\server\config\myDomain
When I start the server the access and transaction logs end up in
projects\bat
while all the rest of the log files (such as the domain and server log) end
up in
projects\server
My batch file that starts the server looks like this
"%JAVA_HOME%\bin\java" -hotspot -ms64m -mx64m -classpath %CLASSPATH%
"-Dbea.home=e:\bea"
"-Djava.security.policy==i:\projects\server\config\myDomain\weblogic.policy"
"-Dweblogic.Domain=myDomain" "-Dweblogic.Name=adminServer"
"-Dweblogic.RootDirectory=i:/projects/server"
"-Dweblogic.management.password=weblogic" weblogic.Server
Thanks for help on this,
MylesThe same case with me, I sent email to apple support, but got not reply.
The apple status page indicated that every thing is fine now, what a joke.
Many devs are in this situation too, I guess we could do nothing but waiting for their system to come up. -
No more logging to access.log after suspend/resume
Hi.
After suspending (forced) and resuming a Managed Server in Weblogic (10.3.6), no more entries are added to access.log in the logs directory of said server. This happens when I use the Admin Console, and when I use WLST:
for serverRT in domainRuntimeService.getServerRuntimes():
print 'Current status for '+ serverRT.getName() +': '+ serverRT.getState()
print 'Suspending '+ serverRT.getName() +'...'
serverRT.forceSuspend()
print 'Resuming '+ serverRT.getName() +'...'
serverRT.resume()
Has anybody encountered this as well, and found a way so resolve this?
FYI, I followed MOS Note 1113583.1 to disable buffering, but this doesn't help.
Regards,
Peter.Yes, it seems to be a kernel bug. Previously, my wife used Windows for years and nothing like this happened. Now, she tells a lot about Linux systems :-)
An example of this very-ugly-workaround for somebody who'll find this topic struggling with the same problem:
$ cat /etc/pm/sleep.d/99_fix_time_shift
#!/bin/bash
# fixing https://bbs.archlinux.org/viewtopic.php?id=173487
case "$1" in
suspend)
date +%s > /tmp/suspend.log
resume)
was=`cat /tmp/suspend.log`
now=`date +%s`
# time shifts for 68 hours
if [ $now -gt `expr $was + 244800` ]; then
date -s "`date -R --date="-68 hours ago"`"
## sleep 30; ntpdate ntp.ubuntu.com
fi
esac
Last edited by shurup (2014-03-26 16:25:55) -
Not able to create log files using logging API's
Hi All,
I am trying to make use of logging API's of SAP in my standalone java project.
Below is the following line of code.
public class TestLog {
private static final com.sap.tc.logging.Location logger = com.sap.tc.logging.Location.getLocation(testLog.class);
static
logger.setEffectiveSeverity(Severity.INFO);
// logger.addLog(new ConsoleLog());
logger.addLog(new FileLog("C://temp//testOutput.log", new ListFormatter()));
public static void main(String[] args) {
writeLog();
public static void writeLog()
logger.entering("entering");
logger.debugT("In Write Log");
logger.exiting("exiting");
But the above codes does not create the testOutput.log file in the dir which i have mentioned . I have added sap.comtcloggingjavaimpl.jar from eclipse plugin folder to make use of these API's .
Could you please help me on this .
Thanks & Regards,
Mitul Adhia.Hi,
Also try adjusting the severity level in nwa(Netweaver Administrator).
1. Go to http://<host-name>:<port-number>/nwa
2. Select Problem Management from tabs.
3. In that select Logs and Traces tab.
4. Select Log configuration
5. in Show select Tracing Locations
6. Select your application and set the severity to be the one lower than that you specify in your code.
Hope it helps.
Regards,
Srinivasan Subbiah -
Rotate Log Files - stdout.log & stderr.log
Hi Folks,
Whats the best way to rotate stdout.log & stderr.log.
I am assuming that rolling of these files can not be configured using felix (please correct me if I am mistaken)
Please advice!
Thanks,
AdnanHi Adnan,
There is currently no way to rotate stdout.log and stderr.log. Therefore, if you want to preserve the stdout.log and stderr.log so that they do not get truncated after restart, add the following commands before any other command in the start script.
# Move stdout.log and stderr.log
mv ../logs/stdout.log ../logs/stdout_$(date +%Y-%m-%d-%H%M).log
mv ../logs/stderr.log ../logs/stderr_$(date +%Y-%m-%d-%H%M).log
Another possible way is to disable the stdout.log and stderr.log entirely and instead output the information to the startup.log. Then you can rotate the startup.log instead.
a) To disable the stderr.log and stdout.log, i guess you can add these lines to your crx-quickstart/server/start script:
QUICKSTART_OPTS='-verbose -nobrowser'
export QUICKSTART_OPTS
b) To configure the path of the startup.log, you can add this to the start script as well (replace /path/to/startup.log with the path you would like the log to be written to instead):
CQ_LOG=/path/to/startup.log
export CQ_LOG
c) Then after doing this, there is a side effect that crx output will go to the startup.log as well. to fix this, do the following:
1) Go to crx-quickstart/server/runtime/0/_crx/log4j.xml
2) Comment out this element <appender-ref ref="console" /> from log4j.xml
<root>
<level value="info" />
<!-- appender-ref ref="console" /-->
<appender-ref ref="error" />
</root>
d) Also, now you would like to rotate the startup.log file:
"The file startup.log logs messages while the Servlet Engine starts. It is usually small, and you cannot configure it."
The startup log cannot be rotated with CQSE facilities. Please note that logs under /server is rotated at operating system level,
for more info see http://httpd.apache.org/docs/2.0/programs/rotatelogs.html
Unix workaround :
in serverctl script, replace the line :
exec $jvmExe >> "$CQ_LOG" 2>&1
by :
exec $jvmExe | /usr/sbin/rotatelogs "$CQ_LOG.%Y%m%d" 86400 >> /dev/null 2>&1
If this doesn't seem to work, then try
exec $jvmExe 2>&1 | /usr/sbin/rotatelogs "$CQ_LOG.%Y%m%d" 86400
Unfortunately, I did not found any workaround for windows system.
Hope this helps.
Thanks,
Varun -
HAL - Unabled to write or access Vignette's HAL log file (access denied)
Hi everybody,
In Vignette in the EXE, in "LOGGING" tab,
I choose "Enabled logging" "Log Messages to"
"File" \mfqhaldv01\RAPFIN\DEVL\TRAITEMENT\RAPFIN02_BALVER.log
if I have a access denied on this file, how can I do to know if I have a problem I can't get any information because I don't have access to.
What can I do to see the error message ?
Thanks & Regards.
Eric.One, I would see about getting access to that share. If you can not, I would save off the copy of hte .prp and run it or create a new .exe with a logging path you can access. This has to be done in the HAL studio.....hopefully can just reconfigure and get the file that way.
-
"Kernel Panic" with log file: what could be the cause...?
Hi,
Today I had my 3th "kernel panic" if I'm right.
I have an IbookG4 1,42GHz.
I've already post my problem, with log, on a dutch Apple forum but the people don't know what the log means. The problem can't be new hardware (more memory) because I haven't installed more and new hardware except that I have an external Harddrive.
One people suggest that I reset my PRAM, NVRAM and PMU and control my HD. That I have done but if the problem is solved, I don't know.
What I was doing the last 2 times when a "kernel panic" occured: I was working with VectorDesigner. The last time, that program was the only one open. Is it possible that my laptop can't cope with that grafic program, the laptop gets overload and crashes?
Also, when I restart the laptop after the "kernel panic", the laptop ask to push on a button to send a paper to Apple, but if I do so It seems to do nothing. So has it send a paper, I don't know.
Below the log of the last 2 kernal when I was working with VectorDesigner. I hope that someone could read this log and understands it and know what the cause is of the kernel panic:
Thu Mar 27 17:43:51 2008
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000B0015000 PC=0x0000000000976278
Latest crash info for cpu 0:
Exception state (sv=0x2EFAE000)
PC=0x00976278; MSR=0x00009030; DAR=0xB0015000; DSISR=0x40000000; LR=0x00976288; R1=0x0CF33A60; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00976288 0x0099DEC8 0x0099C7F0 0x0096C924 0x002EC884 0x0008CA28
0x00029234 0x000233F8 0x000ABEAC 0xFF4B2E30
Kernel loadable modules in backtrace (with dependencies):
com.apple.ATIRadeon9700(4.1.8)@0x963000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x877000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x89b000
Proceeding back via exception chain:
Exception state (sv=0x2EFAE000)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x2F0A6A00)
PC=0x9000B348; MSR=0x0200F030; DAR=0x53D3E010; DSISR=0x40000000; LR=0x9000B29C; R1=0xBFFF4B80; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x2EFAE000)
PC=0x00976278; MSR=0x00009030; DAR=0xB0015000; DSISR=0x40000000; LR=0x00976288; R1=0x0CF33A60; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00976288 0x0099DEC8 0x0099C7F0 0x0096C924 0x002EC884 0x0008CA28
0x00029234 0x000233F8 0x000ABEAC 0xFF4B2E30
Kernel loadable modules in backtrace (with dependencies):
com.apple.ATIRadeon9700(4.1.8)@0x963000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x877000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x89b000
Exception state (sv=0x2F0A6A00)
PC=0x9000B348; MSR=0x0200F030; DAR=0x53D3E010; DSISR=0x40000000; LR=0x9000B29C; R1=0xBFFF4B80; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
Mon Apr 7 14:00:05 2008
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000B0015000 PC=0x0000000000976278
Latest crash info for cpu 0:
Exception state (sv=0x212C2500)
PC=0x00976278; MSR=0x00009030; DAR=0xB0015000; DSISR=0x40000000; LR=0x00976288; R1=0x0CEA3A60; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00976288 0x0099DEC8 0x0099C7F0 0x0096C924 0x002EC884 0x0008CA28
0x00029234 0x000233F8 0x000ABEAC 0x00000FFF
Kernel loadable modules in backtrace (with dependencies):
com.apple.ATIRadeon9700(4.1.8)@0x963000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x877000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x89b000
Proceeding back via exception chain:
Exception state (sv=0x212C2500)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x21249C80)
PC=0x9000B348; MSR=0x0200F030; DAR=0x06CB4240; DSISR=0x40000000; LR=0x9000B29C; R1=0xBFFF51C0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x212C2500)
PC=0x00976278; MSR=0x00009030; DAR=0xB0015000; DSISR=0x40000000; LR=0x00976288; R1=0x0CEA3A60; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00976288 0x0099DEC8 0x0099C7F0 0x0096C924 0x002EC884 0x0008CA28
0x00029234 0x000233F8 0x000ABEAC 0x00000FFF
Kernel loadable modules in backtrace (with dependencies):
com.apple.ATIRadeon9700(4.1.8)@0x963000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x877000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x89b000
Exception state (sv=0x21249C80)
PC=0x9000B348; MSR=0x0200F030; DAR=0x06CB4240; DSISR=0x40000000; LR=0x9000B29C; R1=0xBFFF51C0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
Greets,
SvenMaybe something on this page will help you. Scroll to the kernel panic causes near the bottom.
http://docs.info.apple.com/article.html?artnum=106464
Maybe you are looking for
-
Internet Access in MPLS VPN scenario
Hi, I do have topology CE8-PE2(AS 65001)-PE1(AS 65001)-ASBR1(AS1). Now PE2 and PE1 both are in same AS and PE1 has ebgp with ASBR1, ASBR1 is my internet router. I do have vrf ce on router PE2 and have attached that vrf on PE2 interface where CE8 is c
-
now i got the answer that i phone cant be downgradable from 7 to 6.1.If it possible thats good.I expect newer version will be better,one fuction i liked in older version is contact picture size is full screen
-
Hi I m using Lumia 620 Denim update my problem is that its hanging very much I have to take off battery for restart internal memory is 3 gb free what to do help me plz
-
I have a page with five different swfs embbedded in it. However on some browsers the swf with focus is highlighted with a ring around it to show it has focus. However I don't want it or any of the movies to have this ring/highlighting when they have
-
What's With This New T-Mobile Update?
I have T-Mobile will there be a update soon ?