Log file handling in BDC
Hi All,
I want to store the log message into a folder on aplication server of BDC process (either success or error msg).
Folder path is taken from the user, n i want to store these success n error msg logs into different folder(1 for success n 2nd for error) for this i think i need to create these 2 folders at run time n store logs in corresponding folder. Is it possible.. if yes thn please guide me.
Thanks in advance...
helpful answer will be rewarded.
Regard
Abhishek
Try FM BRAN_DIR_CREATE to create a folder.
However consider - if the BDC is being run by many users, then they would need write access to the application server. This maybe isn't good for security purposes...
If you just want to store the results of BDC for troubleshooting etc, then you could instead create a bespoke DB table and store the results there when they happen. Less involved than having lots of files sitting around...
Similar Messages
-
I'm running ITS 6.20. I have a copy of the "ITS Tuning and Troubleshooting Guide, Release 6.20". I've started taking a closer look at the log mechanism built into ITS. My question is, how often(and when) does the ITS check it's logs(e.g. the performance, access logs, etc) and execute "burial commands"?
Thanks.
Kevin.Hi Kevin,
Go through the links,
http://help.sap.com/saphelp_47x200/helpdata/en/32/1166e5f97811d1801d00c04fadbf76/content.htm
http://help.sap.com/saphelp_47x200/helpdata/en/32/1166e2f97811d1801d00c04fadbf76/content.htm
Regards,
Azaz Ali. -
Storing of log file in A/P Server while running BDC session in SM35
Hi All,
I have issue when running BDC session in SM35.
The actual issue is
I need to store of log file generated while running BDC session in <b>SM35</b> in <b>Application/Presentation</b> Server path.
When ever we run single session the Log file regarding that session we need to store in Application/Presentation Server.
Can anybody have solution for this issue.
Thanks in advance.
Thanks & Regards,
Rayeez.Hi
See the std report RSBDC_ANALYSE, here you can know how to find out the log of B.I..
You can create a program like that to load the log into file instead of showing it.
Max -
Database Log File becomes very big, What's the best practice to handle it?
The log of my production Database is getting very big, and the harddisk is almost full, I am pretty new to SAP, but familiar with SQL Server, if anybody can give me advice on what's the best practice to handle this issue.
Should I Shrink the Database?
I know increase hard disk is need for long term .
Thanks in advance.Hi Finke,
Usually the log file fills up and grow huge, due to not having regular transaction log backups. If you database is in FULL recovery mode, every transaction is logged in Transaction file, and it gets cleared when you take a log backup. If it is a production system and if you don't have regular transaction log backups, the problem is just sitting there to explode, when you need a point in time restore. Please check you backup/restore strategy.
Follow these steps to get transactional file back in normal shape:
1.) Take a transactional backup.
2.) shrink log file. ( DBCC shrinkfile('logfilename',10240)
The above command will shrink the file to 10 GB.(recommended size for high transactional systems)
>
Finke Xie wrote:
> Should I Shrink the Database? .
"NEVER SHRINK DATA FILES", shrink only log file
3.) Schedule log backups every 15 minutes.
Thanks
Mush -
Does the logging API provide "Asynchronous File Handler", like log4j ?
Hi,
One more question about java.util.logging:
Does sun provide a standard "Asynchronous File Handler", equivalent to log4j AsyncFileAppender ?
The idea is, logging requests are placed into a queue, which is being consumed by a dedicated logging-IO thread.
Thanks.it's a shame, really. the Logging API was blatantly inspired by Log4J, but it's just such a poor cousin in so many ways...
-
Problem with File Handler and log files
I'm developing a polymorphic structure for file handling specially for the log file for a server based App... Its working fine except for one thing. The log file that goes into the File Handler comes as a parameter to the class, the problem is that when it writes de file, though it DOES know where it should go, it doesn't do it and it writes the message into some other Log file belonging to another process...
Does someone know how to avoid this or fix it?? any ideas or tips would be great!!Immediately below the Tabs saying "Files" and Assets" is a small box
with arrow on the right to show the drop down list. In the box
on the right there's an icon of two networked computers. Then it
says, "ftp://Hill farm Web Site" which is the name of my website.
If I click on the arrows to pull up the drop-down box, I get four
options divided by a line. Above the line the options are Computer,
HD and ftp://Hill farm Web Site. Below the line it says manage sites.
Below this is list of files that make up my website in a directory
structure. The header for the first column reads, "Local Files",
which appears to be untrue, because the top line in the directory
structure below reads, "ftp://Hill farm Web Site".
Does this help?
regards
David -
Hi friends.This is Sudhir . I have a scenario of loading mass vendor data. If in case any error occurs while loading the error record should be created as log file. Do we have any function module to create the log file?
Hope your answers will be helpful to proceed further.
With regards ,
Sudhir SAre you looking a way for generating logs as the ones you can see in SLG0?
You can also store them into a spool.
To store them into a file, you can simply read the spool output (or you can maybe use a SUBMIT ... EXPORTING LIST TO MEMORY to avoid the spool).
In that case, please refer to [sap library|http://help.sap.com/saphelp_nw2004s/helpdata/en/d3/1fa03940fab918e10000000a114084/frameset.htm]
and SBAL* demo programs (use of BAL_* function modules)
Edited by: Sandra Rossi on Jul 20, 2010 10:39 PM -
Hi,
How you process error record is at that instant from log file.
thanks.
swamyHi swamy
if u r using call transaction then u can populate error record into separate internal table and perfrom session method for these records
and if the records are few go to sm35 transaction after performing session and correct the errors manually( errors are few) otherwise recorrect the flat file with correct data and process again.
Reward points for helpful answers,
kiran.M -
Steps to empty SAPDB (MaxDB) log file
Hello All,
i am on Redhat Unix Os with NW 7.1 CE and SAPDB as Back end. I am trying to login but my log file is full. Ii want to empty log file but i havn't done any data backup yet. Can anybody guide me how toproceed to handle this problem.
I do have some idea what to do like the steps below
1. take databackup (but i want to skip this step if possible) since this is a QA system and we are not a production company.
2. Take log backup using same methos as data backup but with Log type (am i right or there is somethign else)
3. It will automatically overwrite log after log backups.
or should i use this as an alternative, i found this in note Note 869267 - FAQ: SAP MaxDB LOG area
Can the log area be overwritten cyclically without having to make a log backup?
Yes, the log area can be automatically overwritten without log backups. Use the DBM command
util_execute SET LOG AUTO OVERWRITE ON
to set this status. The behavior of the database corresponds to the DEMO log mode in older versions. With version 7.4.03 and above, this behavior can be set online.
Log backups are not possible after switching on automatic overwrite. Backup history is broken down and flagged by the abbreviation HISTLOST in the backup history (dbm.knl file). The backup history is restarted when you switch off automatic overwrite without log backups using the command
util_execute SET LOG AUTO OVERWRITE OFF
and by creating a complete data backup in the ADMIN or ONLINE status.
Automatic overwrite of the log area without log backups is NOT suitable for production operation. Since no backup history exists for the following changes in the database, you cannot track transactions in the case of recovery.
any reply will be highly appreciated.
Thanks
ManiHello Mani,
1. Please review the document u201CUsing SAP MaxDB X Server Behind a Firewallu201D at MAXDB library
http://maxdb.sap.com/doc/7_7/44/bbddac91407006e10000000a155369/content.htm
u201CTo enable access to X Server (and thus the database) behind a firewall using a client program such as Database Studio, open the necessary ports in your firewall and restrict access to these ports to only those computers that need to access the database.u201D
Is the database server behind a Firewall? If yes, then the Xserver port need to be open. You could restrict access to this port to the computers of your database administrators, for example.
Is "nq2host" the name of the database server? Could you ping to the server "nq2host" from your machine?
2. And if the database server and your PC in the local area NetWork you could start the x_server on the database server & connect to the database using the DB studio on your PC, as you already told by Lars.
See the document u201CNetwork Communicationu201D at
http://maxdb.sap.com/doc/7_7/44/d7c3e72e6338d3e10000000a1553f7/content.htm
Thank you and best regards, Natalia Khlopina -
Problem with logging in log files.
HI,
Our's is a client/server application.
In our application there are so many clients.
They each have separate page(web page).
When a client download any file from their site it logs(client name, time, file name etc.) into a common log file(access.log) and a client specific log file(access.client_name).
Logging in common file(access.log) is performing well.
Logging in client specific log file works for some clients and don't work for some clients.
For example there is a client called 'candy'.
Some times it logs in the log file, access.candy
some times it don't log.
Tell me wht is the problem.
If you want more information regarding my problem, I will send.
Please give me some solution.
Thank you.............Third Party Client: ((__null) != m_lock && 0 == (*__error())) Can't create semaphore lock
There seems to be something wrong with a handling (m_lock = method of lock) of semaphore mechanism-- It appears to be a program issue, which is either on your local machine or a remote Web site' page(s).
'semaphore' Apple definition (quotation from ADC) :
A programming technique for coordinating activities in which multiple processes compete for the same kernel resources. Semaphores are commonly used to share a common memory space and to share access to files. Semaphores are one of the techniques for interprocess communication in BSD.
In short, it is a flag to terminate a task/thread efficiently without fail prior to another task/thread starts-- a synchronization mechanism among cooperating threads/tasks. (You might need to have some understanding of the basic concepts of locks and semaphores.)
I would test any suspect applications to uninstall temporarily to see if the erratic events are displayed on Console. Perhaps, vlc player?
Fumiaki
Tokyo -
How to see data for particular date from a alert log file
Hi Experts,
I would like to know how can i see data for a particular date from alert_db.log in unix environment. I'm suing 0racle 9i in unix
Right now i'm using tail -500 alert_db.log>alert.txt then view the whole thing. But is there any easier way to see for a partiicular date or time
Thanks
ShaanHi Jaffar,
Here i have to pass exactly date and time, is there any way to see records for let say Nov 23 2007. because when i used this
tail -500 alert_sid.log | grep " Nov 23 2007" > alert_date.txt
It's not working. Here is the sample log file
Mon Nov 26 21:42:43 2007
Thread 1 advanced to log sequence 138
Current log# 3 seq# 138 mem# 0: /oracle/NEWDB/oradata/NEWDB/redo3.log
Mon Nov 26 21:42:43 2007
ARCH: Evaluating archive log 1 thread 1 sequence 137
Mon Nov 26 21:42:43 2007
ARC1: Evaluating archive log 1 thread 1 sequence 137
ARC1: Unable to archive log 1 thread 1 sequence 137
Log actively being archived by another process
Mon Nov 26 21:42:43 2007
ARCH: Beginning to archive log 1 thread 1 sequence 137
Creating archive destination LOG_ARCHIVE_DEST_1: '/oracle/NEWDB/admin/arch/1_137
.dbf'
ARCH: Completed archiving log 1 thread 1 sequence 137
Mon Nov 26 21:42:44 2007
Thread 1 advanced to log sequence 139
Current log# 2 seq# 139 mem# 0: /oracle/NEWDB/oradata/NEWDB/redo2.log
Mon Nov 26 21:42:44 2007
ARC0: Evaluating archive log 3 thread 1 sequence 138
ARC0: Beginning to archive log 3 thread 1 sequence 138
Creating archive destination LOG_ARCHIVE_DEST_1: '/oracle/NEWDB/admin/arch/1_138
.dbf'
Mon Nov 26 21:42:44 2007
ARCH: Evaluating archive log 3 thread 1 sequence 138
ARCH: Unable to archive log 3 thread 1 sequence 138
Log actively being archived by another process
Mon Nov 26 21:42:45 2007
ARC0: Completed archiving log 3 thread 1 sequence 138
Mon Nov 26 21:45:12 2007
Starting control autobackup
Mon Nov 26 21:45:56 2007
Control autobackup written to SBT_TAPE device
comment 'API Version 2.0,MMS Version 5.0.0.0',
media 'WP0033'
handle 'c-2861328927-20071126-01'
Clearing standby activation ID 2873610446 (0xab47d0ce)
The primary database controlfile was created using the
'MAXLOGFILES 5' clause.
The resulting standby controlfile will not have enough
available logfile entries to support an adequate number
of standby redo logfiles. Consider re-creating the
primary controlfile using 'MAXLOGFILES 8' (or larger).
Use the following SQL commands on the standby database to create
standby redo logfiles that match the primary database:
ALTER DATABASE ADD STANDBY LOGFILE 'srl1.f' SIZE 10485760;
ALTER DATABASE ADD STANDBY LOGFILE 'srl2.f' SIZE 10485760;
ALTER DATABASE ADD STANDBY LOGFILE 'srl3.f' SIZE 10485760;
ALTER DATABASE ADD STANDBY LOGFILE 'srl4.f' SIZE 10485760;
Tue Nov 27 21:23:50 2007
Starting control autobackup
Tue Nov 27 21:30:49 2007
Control autobackup written to SBT_TAPE device
comment 'API Version 2.0,MMS Version 5.0.0.0',
media 'WP0280'
handle 'c-2861328927-20071127-00'
Tue Nov 27 21:30:57 2007
ARC1: Evaluating archive log 2 thread 1 sequence 139
ARC1: Beginning to archive log 2 thread 1 sequence 139
Creating archive destination LOG_ARCHIVE_DEST_1: '/oracle/NEWDB/admin/arch/1_139
.dbf'
Tue Nov 27 21:30:57 2007
Thread 1 advanced to log sequence 140
Current log# 1 seq# 140 mem# 0: /oracle/NEWDB/oradata/NEWDB/redo1.log
Tue Nov 27 21:30:57 2007
ARCH: Evaluating archive log 2 thread 1 sequence 139
ARCH: Unable to archive log 2 thread 1 sequence 139
Log actively being archived by another process
Tue Nov 27 21:30:58 2007
ARC1: Completed archiving log 2 thread 1 sequence 139
Tue Nov 27 21:30:58 2007
Thread 1 advanced to log sequence 141
Current log# 3 seq# 141 mem# 0: /oracle/NEWDB/oradata/NEWDB/redo3.log
Tue Nov 27 21:30:58 2007
ARCH: Evaluating archive log 1 thread 1 sequence 140
ARCH: Beginning to archive log 1 thread 1 sequence 140
Creating archive destination LOG_ARCHIVE_DEST_1: '/oracle/NEWDB/admin/arch/1_140
.dbf'
Tue Nov 27 21:30:58 2007
ARC1: Evaluating archive log 1 thread 1 sequence 140
ARC1: Unable to archive log 1 thread 1 sequence 140
Log actively being archived by another process
Tue Nov 27 21:30:58 2007
ARCH: Completed archiving log 1 thread 1 sequence 140
Tue Nov 27 21:33:16 2007
Starting control autobackup
Tue Nov 27 21:34:29 2007
Control autobackup written to SBT_TAPE device
comment 'API Version 2.0,MMS Version 5.0.0.0',
media 'WP0205'
handle 'c-2861328927-20071127-01'
Clearing standby activation ID 2873610446 (0xab47d0ce)
The primary database controlfile was created using the
'MAXLOGFILES 5' clause.
The resulting standby controlfile will not have enough
available logfile entries to support an adequate number
of standby redo logfiles. Consider re-creating the
primary controlfile using 'MAXLOGFILES 8' (or larger).
Use the following SQL commands on the standby database to create
standby redo logfiles that match the primary database:
ALTER DATABASE ADD STANDBY LOGFILE 'srl1.f' SIZE 10485760;
ALTER DATABASE ADD STANDBY LOGFILE 'srl2.f' SIZE 10485760;
ALTER DATABASE ADD STANDBY LOGFILE 'srl3.f' SIZE 10485760;
ALTER DATABASE ADD STANDBY LOGFILE 'srl4.f' SIZE 10485760;
Wed Nov 28 21:43:31 2007
Starting control autobackup
Wed Nov 28 21:43:59 2007
Control autobackup written to SBT_TAPE device
comment 'API Version 2.0,MMS Version 5.0.0.0',
media 'WP0202'
handle 'c-2861328927-20071128-00'
Wed Nov 28 21:44:08 2007
Thread 1 advanced to log sequence 142
Current log# 2 seq# 142 mem# 0: /oracle/NEWDB/oradata/NEWDB/redo2.log
Wed Nov 28 21:44:08 2007
ARCH: Evaluating archive log 3 thread 1 sequence 141
ARCH: Beginning to archive log 3 thread 1 sequence 141
Wed Nov 28 21:44:08 2007
ARC1: Evaluating archive log 3 thread 1 sequence 141
ARC1: Unable to archive log 3 thread 1 sequence 141
Log actively being archived by another process
Wed Nov 28 21:44:08 2007
Creating archive destination LOG_ARCHIVE_DEST_1: '/oracle/NEWDB/admin/arch/1_141
.dbf'
Wed Nov 28 21:44:08 2007
ARC0: Evaluating archive log 3 thread 1 sequence 141
ARC0: Unable to archive log 3 thread 1 sequence 141
Log actively being archived by another process
Wed Nov 28 21:44:08 2007
ARCH: Completed archiving log 3 thread 1 sequence 141
Wed Nov 28 21:44:09 2007
Thread 1 advanced to log sequence 143
Current log# 1 seq# 143 mem# 0: /oracle/NEWDB/oradata/NEWDB/redo1.log
Wed Nov 28 21:44:09 2007
ARCH: Evaluating archive log 2 thread 1 sequence 142
ARCH: Beginning to archive log 2 thread 1 sequence 142
Creating archive destination LOG_ARCHIVE_DEST_1: '/oracle/NEWDB/admin/arch/1_142
.dbf'
Wed Nov 28 21:44:09 2007
ARC0: Evaluating archive log 2 thread 1 sequence 142
ARC0: Unable to archive log 2 thread 1 sequence 142
Log actively being archived by another process
Wed Nov 28 21:44:09 2007
ARCH: Completed archiving log 2 thread 1 sequence 142
Wed Nov 28 21:44:36 2007
Starting control autobackup
Wed Nov 28 21:45:00 2007
Control autobackup written to SBT_TAPE device
comment 'API Version 2.0,MMS Version 5.0.0.0',
media 'WP0202'
handle 'c-2861328927-20071128-01'
Clearing standby activation ID 2873610446 (0xab47d0ce)
The primary database controlfile was created using the
'MAXLOGFILES 5' clause.
The resulting standby controlfile will not have enough
available logfile entries to support an adequate number
of standby redo logfiles. Consider re-creating the
primary controlfile using 'MAXLOGFILES 8' (or larger).
Use the following SQL commands on the standby database to create
standby redo logfiles that match the primary database:
ALTER DATABASE ADD STANDBY LOGFILE 'srl1.f' SIZE 10485760;
ALTER DATABASE ADD STANDBY LOGFILE 'srl2.f' SIZE 10485760;
ALTER DATABASE ADD STANDBY LOGFILE 'srl3.f' SIZE 10485760;
ALTER DATABASE ADD STANDBY LOGFILE 'srl4.f' SIZE 10485760;
Thu Nov 29 21:36:44 2007
Starting control autobackup
Thu Nov 29 21:42:53 2007
Control autobackup written to SBT_TAPE device
comment 'API Version 2.0,MMS Version 5.0.0.0',
media 'WP0206'
handle 'c-2861328927-20071129-00'
Thu Nov 29 21:43:01 2007
Thread 1 advanced to log sequence 144
Current log# 3 seq# 144 mem# 0: /oracle/NEWDB/oradata/NEWDB/redo3.log
Thu Nov 29 21:43:01 2007
ARCH: Evaluating archive log 1 thread 1 sequence 143
ARCH: Beginning to archive log 1 thread 1 sequence 143
Creating archive destination LOG_ARCHIVE_DEST_1: '/oracle/NEWDB/admin/arch/1_143
.dbf'
Thu Nov 29 21:43:01 2007
ARC1: Evaluating archive log 1 thread 1 sequence 143
ARC1: Unable to archive log 1 thread 1 sequence 143
Log actively being archived by another process
Thu Nov 29 21:43:02 2007
ARCH: Completed archiving log 1 thread 1 sequence 143
Thu Nov 29 21:43:03 2007
Thread 1 advanced to log sequence 145
Current log# 2 seq# 145 mem# 0: /oracle/NEWDB/oradata/NEWDB/redo2.log
Thu Nov 29 21:43:03 2007
ARCH: Evaluating archive log 3 thread 1 sequence 144
ARCH: Beginning to archive log 3 thread 1 sequence 144
Creating archive destination LOG_ARCHIVE_DEST_1: '/oracle/NEWDB/admin/arch/1_144
.dbf'
Thu Nov 29 21:43:03 2007
ARC0: Evaluating archive log 3 thread 1 sequence 144
ARC0: Unable to archive log 3 thread 1 sequence 144
Log actively being archived by another process
Thu Nov 29 21:43:03 2007
ARCH: Completed archiving log 3 thread 1 sequence 144
Thu Nov 29 21:49:00 2007
Starting control autobackup
Thu Nov 29 21:50:14 2007
Control autobackup written to SBT_TAPE device
comment 'API Version 2.0,MMS Version 5.0.0.0',
media 'WP0280'
handle 'c-2861328927-20071129-01'
Thanks
Shaan -
I have a menuapp to launch many applications, all running in same JVM and i want to add logging information to them, using java.util.logging.
Intention is to redirect the logginginfo to a specific file within the menuapp. Then i want all logging from all applications written in same file. Finally, if needed (but i don't think it is), i will include code to write logging to specific file per app (class). The latter is probably not neccessary because there are tools to analyse the logging-files and allow to select filters on specific classes only.
The applications are in their own packages/jars and contain following logging-code:
// Redirect error output
try {
myHandler = new FileHandler("myLogging.xml",1000000,2);
} catch (IOException e) {
System.out.println("Could not create file. Using the console handler");
myLogger.addHandler(myHandler);
myLogger.info("Our first logging message");
myLogger.severe("Something terrible happened");
...When i launch the menuapplication, it writes info to "myLogging.xml.0"
but when i launch an application, the app writes info to "myLogging.xml.0.1"
I already tried to leave out the creation of a new Filehandler (try/catch block in code above) but it doesn't help.
Is it possible to write loginfo to same specific file?You should open/close it somehow at every write from different processes.
But I personally prefer different file names to your forced merging, though. -
Server shutdown with the following log file -?
JAVA Memory arguments: -Xms256m -Xmx512m -XX:MaxPermSize=128m
WLS Start Mode=Production
CLASSPATH=:/home3/bea9/patch_weblogic922/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home3/bea9/jdk150_07/lib/tools.jar:/home3/bea9/weblogic92/server/lib/weblogic_sp.jar:/home3/bea9/weblogic92/server/lib/weblogic.jar:/home3/bea9/weblogic92/server/lib/webservices.jar::/home3/bea9/weblogic92/common/eval/pointbase/lib/pbclient51.jar:/home3/bea9/weblogic92/server/lib/xqrl.jar::
PATH=/home3/bea9/weblogic92/server/bin:/home3/bea9/jdk150_07/jre/bin:/home3/bea9/jdk150_07/bin:/usr/bin:/usr/ccs/bin:/usr/contrib/bin:/opt/nettladm/bin:/opt/fc/bin:/opt/fcms/bin:/opt/upgrade/bin:/opt/pd/bin:/usr/bin/X11:/usr/contrib/bin/X11:/opt/hparray/bin:/opt/langtools/bin:/opt/imake/bin:/opt/perf/bin:/opt/ignite/bin:/opt/OV/bin/OpC:/opt/hpnp//bin:/opt/resmon/bin:/usr/sbin/diag/contrib:/opt/pred/bin:/opt/sec_mgmt/spc/bin:/opt/graphics/common/bin:/opt/OV/bin:/opt/ssh/bin:/opt/sec_mgmt/bastille/bin:.
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
java version "1.5.0.07"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0.07-_20_mar_2007_05_31)
Java HotSpot(TM) Server VM (build 1.5.0.07 jinteg:03.20.07-04:39 PA2.0 (aCC_AP), mixed mode)
Starting WLS with line:
/home3/bea9/jdk150_07/bin/java -server -Xms256m -Xmx512m -XX:MaxPermSize=128m -da -Dplatform.home=/home3/bea9/weblogic92 -Dwls.home=/home3/bea9/weblogic92/server -Dwli.home=/home3/bea9/weblogic92/integration -Dweblogic.management.discover=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/home3/bea9/patch_weblogic922/profiles/default/sysext_manifest_classpath -Dweblogic.Name=Admin -Djava.security.policy=/home3/bea9/weblogic92/server/lib/weblogic.policy weblogic.Server
<May 13, 2009 10:36:22 AM EDT> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
/home3/bea9/weblogic92/platform/lib/p13n/p13n-schemas.jar:/home3/bea9/weblogic92/platform/lib/p13n/p13n_common.jar:/home3/bea9/weblogic92/platform/lib/p13n/p13n_system.jar:/home3/bea9/weblogic92/platform/lib/wlp/netuix_common.jar:/home3/bea9/weblogic92/platform/lib/wlp/netuix_schemas.jar:/home3/bea9/weblogic92/platform/lib/wlp/netuix_system.jar:/home3/bea9/weblogic92/platform/lib/wlp/wsrp-common.jar>
<May 13, 2009 10:36:24 AM EDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Server VM Version 1.5.0.07 jinteg:03.20.07-04:39 PA2.0 (aCC_AP) from Hewlett-Packard Company>
<May 13, 2009 10:36:29 AM EDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 9.2 MP2 Mon Jun 25 01:32:01 EDT 2007 952826 >
<May 13, 2009 10:37:03 AM EDT> <Info> <WebLogicServer> <BEA-000215> <Loaded License : /home3/bea9/license.bea>
<May 13, 2009 10:37:03 AM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<May 13, 2009 10:37:03 AM EDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<May 13, 2009 10:37:04 AM EDT> <Notice> <Log Management> <BEA-170019> <The server log file /home3/bea9/user_projects/domains/Production/servers/Admin/logs/Admin.log is opened. All server side log events will be written to this file.>
<May 13, 2009 10:37:08 AM EDT> <Alert> <Socket> <BEA-000414> <Could not initialize POSIX Performance Pack.>
<May 13, 2009 10:37:08 AM EDT> <Warning> <Socket> <BEA-000444> <Could not load the performance pack that can take advantage of /dev/(e)poll device due to:
weblogic.utils.NestedError: Could not initialize /dev/poll Performance Pack. Ensure that /dev/poll device exists and is initialized..
Will attempt to use the performance pack that does not depend on /dev/(e)poll device.>
<May 13, 2009 10:37:18 AM EDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<May 13, 2009 10:37:35 AM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<May 13, 2009 10:37:35 AM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<May 13, 2009 10:37:52 AM EDT> <Notice> <Log Management> <BEA-170027> <The server initialized the domain log broadcaster successfully. Log messages will now be broadcasted to the domain log.>
<May 13, 2009 10:37:53 AM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<May 13, 2009 10:37:53 AM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<May 13, 2009 10:37:54 AM EDT> <Warning> <Server> <BEA-002611> <Hostname "ncsci015", maps to multiple IP addresses: 10.45.8.61, 127.0.0.1>
<May 13, 2009 10:37:54 AM EDT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:9001 for protocols iiop, t3, ldap, http.>
<May 13, 2009 10:37:54 AM EDT> <Warning> <Server> <BEA-002611> <Hostname "localhost", maps to multiple IP addresses: 10.45.8.61, 127.0.0.1>
<May 13, 2009 10:37:54 AM EDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.45.8.61:9001 for protocols iiop, t3, ldap, http.>
<May 13, 2009 10:37:54 AM EDT> <Notice> <WebLogicServer> <BEA-000329> <Started WebLogic Admin Server "Admin" for domain "Production" running in Production Mode>
<May 13, 2009 10:37:54 AM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<May 13, 2009 10:37:54 AM EDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<May 13, 2009 10:39:55 AM EDT> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=HomePage1.>
<May 13, 2009 10:43:47 AM EDT> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=ServerConfigGeneralTabPage&handle=com.bea.console.handles.JMXHandle%28%22com.bea%3AName%3DTCSE%2CType%3DServer%22%29.>
<May 13, 2009 10:44:08 AM EDT> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=WebAppApplicationOverviewPage&WebAppApplicationOverviewPortlethandle=com.bea.console.handles.AppDeploymentHandle%28%22com.bea%3AName%3Dtcr%2CType%3DAppDeployment%22%29.>
<May 13, 2009 10:44:12 AM EDT> <Warning> <J2EE Deployment SPI> <BEA-260128> <Changes not allowed to DTD based descriptors. The attempt to modify property 'ServletName' in WEB-INF/weblogic.xml for module 'tcr.war' will be vetoed if possible. The change will not be persisted in either case.>
<May 13, 2009 10:44:12 AM EDT> <Warning> <J2EE Deployment SPI> <BEA-260128> <Changes not allowed to DTD based descriptors. The attempt to modify property 'ServletName' in WEB-INF/weblogic.xml for module 'tcr.war' will be vetoed if possible. The change will not be persisted in either case.>
<May 13, 2009 10:44:12 AM EDT> <Warning> <J2EE Deployment SPI> <BEA-260128> <Changes not allowed to DTD based descriptors. The attempt to modify property 'ServletName' in WEB-INF/weblogic.xml for module 'tcr.war' will be vetoed if possible. The change will not be persisted in either case.>
<May 13, 2009 10:44:12 AM EDT> <Warning> <J2EE Deployment SPI> <BEA-260128> <Changes not allowed to DTD based descriptors. The attempt to modify property 'ServletName' in WEB-INF/weblogic.xml for module 'tcr.war' will be vetoed if possible. The change will not be persisted in either case.>
<May 13, 2009 10:44:12 AM EDT> <Warning> <J2EE Deployment SPI> <BEA-260128> <Changes not allowed to DTD based descriptors. The attempt to modify property 'ServletName' in WEB-INF/weblogic.xml for module 'tcr.war' will be vetoed if possible. The change will not be persisted in either case.>
<May 13, 2009 12:34:44 PM EDT> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=HomePage1.>
<May 13, 2009 12:43:36 PM EDT> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=HomePage1.>
<May 13, 2009 1:12:29 PM EDT> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=HomePage1.>
<May 14, 2009 12:27:16 PM EDT> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=HomePage1.>
<May 14, 2009 12:27:29 PM EDT> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=ServerConfigGeneralTabPage&handle=com.bea.console.handles.JMXHandle%28%22com.bea%3AName%3DTCSE%2CType%3DServer%22%29.>
<May 14, 2009 12:29:21 PM EDT> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=HomePage1.>
<May 14, 2009 12:29:30 PM EDT> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=ServerConfigGeneralTabPage&handle=com.bea.console.handles.JMXHandle%28%22com.bea%3AName%3DTCSE%2CType%3DServer%22%29.>
<May 14, 2009 12:29:44 PM EDT> <Error> <netuix> <BEA-423405> <An exception [Broken pipe (errno:32)] was thrown while rendering the content at [jsp/contentheader/ContentMenu.jsp].
java.net.SocketException: Broken pipe (errno:32)
at java.net.SocketOutputStream.socketWrite0(Native Method)
at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:97)
at java.net.SocketOutputStream.write(SocketOutputStream.java:141)
at weblogic.servlet.internal.ChunkOutput.writeChunkTransfer(ChunkOutput.java:525)
at weblogic.servlet.internal.ChunkOutput.writeChunks(ChunkOutput.java:504)
Truncated. see log file for complete stacktrace
>
<May 14, 2009 1:47:36 PM EDT> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=HomePage1.>
<May 14, 2009 1:47:48 PM EDT> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=ServerConfigGeneralTabPage&handle=com.bea.console.handles.JMXHandle%28%22com.bea%3AName%3DTCSE%2CType%3DServer%22%29.>
<May 14, 2009 1:57:17 PM EDT> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=HomePage1.>
<May 14, 2009 1:57:27 PM EDT> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=ServerConfigGeneralTabPage&handle=com.bea.console.handles.JMXHandle%28%22com.bea%3AName%3DTCSE%2CType%3DServer%22%29.>
<May 15, 2009 9:15:48 AM EDT> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=HomePage1.>
<May 15, 2009 12:07:05 PM EDT> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=HomePage1.>
<May 15, 2009 12:07:14 PM EDT> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=WebAppApplicationOverviewPage&WebAppApplicationOverviewPortlethandle=com.bea.console.handles.AppDeploymentHandle%28%22com.bea%3AName%3Dtcr%2CType%3DAppDeployment%22%29.>
<May 15, 2009 12:07:15 PM EDT> <Warning> <J2EE Deployment SPI> <BEA-260128> <Changes not allowed to DTD based descriptors. The attempt to modify property 'ServletName' in WEB-INF/weblogic.xml for module 'tcr.war' will be vetoed if possible. The change will not be persisted in either case.>
<May 15, 2009 12:07:15 PM EDT> <Warning> <J2EE Deployment SPI> <BEA-260128> <Changes not allowed to DTD based descriptors. The attempt to modify property 'ServletName' in WEB-INF/weblogic.xml for module 'tcr.war' will be vetoed if possible. The change will not be persisted in either case.>
<May 15, 2009 12:07:15 PM EDT> <Warning> <J2EE Deployment SPI> <BEA-260128> <Changes not allowed to DTD based descriptors. The attempt to modify property 'ServletName' in WEB-INF/weblogic.xml for module 'tcr.war' will be vetoed if possible. The change will not be persisted in either case.>
<May 15, 2009 12:07:15 PM EDT> <Warning> <J2EE Deployment SPI> <BEA-260128> <Changes not allowed to DTD based descriptors. The attempt to modify property 'ServletName' in WEB-INF/weblogic.xml for module 'tcr.war' will be vetoed if possible. The change will not be persisted in either case.>
<May 15, 2009 12:07:15 PM EDT> <Warning> <J2EE Deployment SPI> <BEA-260128> <Changes not allowed to DTD based descriptors. The attempt to modify property 'ServletName' in WEB-INF/weblogic.xml for module 'tcr.war' will be vetoed if possible. The change will not be persisted in either case.>
<May 19, 2009 2:29:26 PM EDT> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=HomePage1.>
<May 31, 2009 10:27:32 PM EDT> <Notice> <WebLogicServer> <BEA-000388> <JVM called WLS shutdown hook. The server will force shutdown now>
<May 31, 2009 10:27:32 PM EDT> <Alert> <WebLogicServer> <BEA-000396> <Server shutdown has been requested by <WLS Kernel>>
<May 31, 2009 10:27:32 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SUSPENDING>
<May 31, 2009 10:27:32 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<May 31, 2009 10:27:32 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
<May 31, 2009 10:27:32 PM EDT> <Notice> <Server> <BEA-002607> <Channel "Default" listening on 10.45.8.61:9001 was shutdown.>
<May 31, 2009 10:27:32 PM EDT> <Notice> <Server> <BEA-002607> <Channel "Default[1]" listening on 127.0.0.1:9001 was shutdown.>
The server shutdown with the above output in the log file, can you please let me know why this happened and any solution for it?
Thanks.Have you see that in your posted log:
<May 13, 2009 10:37:08 AM EDT> <Alert> <Socket> <BEA-000414> <Could not initialize POSIX Performance Pack.>
<May 13, 2009 10:37:08 AM EDT> <Warning> <Socket> <BEA-000444> <Could not load the performance pack that can take advantage of /dev/(e)poll device due to:
weblogic.utils.NestedError: Could not initialize /dev/poll Performance Pack. Ensure that /dev/poll device exists and is initialized
Will attempt to use the performance pack that does not depend on /dev/(e)poll device.>
it seems to be a trouble with server performance pack. Try to DISABLE performance pack on your server and restart (unckeck "Native IO Enabled" on your domain"). You can also found some suggestions on http://edocs.bea.com/wls/docs92/messages/Socket.html (check for "BEA-000414" message).
Regards
Nat. -
Log file is growing too big and too quick on ECC6 EHP4 system
Hello there,
i have ECC6EHP6 system based on NW 7.01 and MSSQL as back-end.
My log file is growing very fast. i seen a number of threads but does not got some perfect idea what to do. Please see DEV_RFC0 and DEV_W0 log file excerpt below. Please help
DEV_RFC0
Trace file opened at 20100618 065308 Eastern Daylight Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLSADC (Transaction: )
User: DDIC (Client: 000)
Destination: SAPDB_DBM_DAEMON (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 59356166, {ADC77ADF-C575-F1CC-B797-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLSADC)
SERVER> Called function module: DBM_CONNECT_PUR
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =SAPDB_DBM_DAEMON
HOST =%%RFCSERVER%%
PROG =dbmrfc@sapdb
Trace file opened at 20100618 065634 Eastern Daylight Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLSADC (Transaction: )
User: DDIC (Client: 000)
Destination: SAPDB_DBM_DAEMON (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 59587535, {28C87ADF-4577-F16D-B797-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLSADC)
SERVER> Called function module: DBM_CONNECT_PUR
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =SAPDB_DBM_DAEMON
HOST =%%RFCSERVER%%
PROG =dbmrfc@sapdb
DEV_W0
X
X Fri Jun 18 18:05:15 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2214]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2214]
N
N Fri Jun 18 18:05:25 2010
N RSEC: The entry with identifier /RFC/DIICLNT800
N was encrypted by a system
N with different SID and cannot be decrypted here.
N RSEC: The entry with identifier /RFC/T90CLNT090
N was encrypted by a system
N with different SID and cannot be decrypted here.
X
X Fri Jun 18 18:05:39 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2214]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2214]
X
X Fri Jun 18 18:05:46 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2214]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2214]
X
X Fri Jun 18 18:05:52 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2214]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2214]
X
N Sun Jun 20 10:55:32 2010
N RSEC: The entry with identifier /RFC/DIICLNT800
N was encrypted by a system
N with different SID and cannot be decrypted here.
N RSEC: The entry with identifier /RFC/T90CLNT090
N was encrypted by a system
N with different SID and cannot be decrypted here.
X
X Sun Jun 20 11:00:02 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2214]
N
N Sun Jun 20 11:00:32 2010
N RSEC: The entry with identifier /RFC/DIICLNT800
N was encrypted by a system
N with different SID and cannot be decrypted here.
N RSEC: The entry with identifier /RFC/T90CLNT090
N was encrypted by a system
N with different SID and cannot be decrypted here.
C
C Sun Jun 20 11:03:34 2010
C Thread ID:1956
C dbmssslib.dll patch info
C patchlevel 0
C patchno 13
C patchcomment Errors when running with par_stmt_prepare set to zero (1253696)
C Local connection used on SAPFIVE to named instance: np:SAPFIVE\ECT
C
C Sun Jun 20 11:03:49 2010
C OpenOledbConnection: line 23839. hr: 0x8000ffff Login timeout expired
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err 0, sev 0), Login timeout expired
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err -1, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err -1, sev 0), SQL Network Interfaces: Server doesn't support requested protocol [xFFFFFFFF].
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C
C Sun Jun 20 11:04:04 2010
C OpenOledbConnection: line 23839. hr: 0x8000ffff Login timeout expired
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err 0, sev 0), Login timeout expired
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err -1, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err -1, sev 0), SQL Network Interfaces: Server doesn't support requested protocol [xFFFFFFFF].
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C
C Sun Jun 20 11:04:19 2010
C OpenOledbConnection: line 23839. hr: 0x8000ffff Login timeout expired
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err 0, sev 0), Login timeout expired
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err -1, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err -1, sev 0), SQL Network Interfaces: Server doesn't support requested protocol [xFFFFFFFF].
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C failed to establish conn to np:SAPFIVE\ECT.
C Retrying without protocol specifier: SAPFIVE\ECT
C Connected to db server : [SAPFIVE\ECT] server_used : [SAPFIVE\ECT], dbname: ECT, dbuser: ect
C pn_id:SAPFIVE_ECT_ECTECT_ECT
B Connection 4 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE YES YES NO 000 255 255 20100618 061458 SAPFIVE\ECT
B 000 001 +DBO+0050 000002156 INACTIVE NO NO NO 004 255 255 20100618 101017 SAPFIVE\ECT
B 000 002 +DBO+0050 000001981 DISCONNECTED NO NO NO 000 255 255 20100620 070023 SAPFIVE\ECT
B 000 003 +DBO+0050 000001982 DISCONNECTED NO NO NO 000 255 255 20100620 070023 SAPFIVE\ECT
B 000 004 R/3*INACT_PACK 000002157 ACTIVE NO NO NO 004 255 255 20100620 110334 SAPFIVE\ECT
N Sun Jun 20 17:35:35 2010
N RSEC: The entry with identifier /RFC/DIICLNT800
N was encrypted by a system
N with different SID and cannot be decrypted here.
N RSEC: The entry with identifier /RFC/T90CLNT090
N was encrypted by a system
N with different SID and cannot be decrypted here.
M
M Sun Jun 20 17:47:29 2010
M ThAlarmHandler (1)
M ThAlarmHandler (1)
M ThAlarmHandler: set CONTROL_TIMEOUT/DP_CONTROL_JAVA_EXIT and break sql
C
C Sun Jun 20 17:47:33 2010
C SQLBREAK: DBSL_CMD_SQLBREAK: CbOnCancel was not set. rc: 15
M program canceled
M reason = max run time exceeded
M user = SAPSYS
M client = 000
M terminal =
M report = SAPMSSY2
M ThAlarmHandler: return from signal handler
A
A Sun Jun 20 17:48:33 2010
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Sun Jun 20 17:48:42 2010
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP_BEG entered.
A ** RABAX: level LEV_RX_WRITE_SNAP_BEG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A
A Sun Jun 20 17:48:48 2010
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_WRITE_SNAP_END entered.
A ** RABAX: level LEV_RX_WRITE_SNAP_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Sun Jun 20 17:48:48 2010
A
A ABAP Program SAPMSSY2 .
A Source RSBTCTRC Line 131.
A Error Code TIME_OUT.
A Module $Id: //bas/701_REL/src/krn/runt/abinit.c#1 $ SAP.
A Function ab_chstat Line 1941.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_BTCHLOG|RX_VBLOG
A Time limit exceeded..
A
X
X Sun Jun 20 17:49:03 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2214]
N Sun Jun 20 18:35:40 2010
N RSEC: The entry with identifier /RFC/DIICLNT800
N was encrypted by a system
N with different SID and cannot be decrypted here.
N RSEC: The entry with identifier /RFC/T90CLNT090
N was encrypted by a system
N with different SID and cannot be decrypted here.
N
N Sun Jun 20 18:50:35 2010
N RSEC: The entry with identifier /RFC/DIICLNT800
N was encrypted by a system
N with different SID and cannot be decrypted here.
N RSEC: The entry with identifier /RFC/T90CLNT090
N was encrypted by a system
N with different SID and cannot be decrypted here.
N
N Sun Jun 20 18:55:31 2010
N RSEC: The entry with identifier /RFC/DIICLNT800
N was encrypted by a system
N with different SID and cannot be decrypted here.
N RSEC: The entry with identifier /RFC/T90CLNT090
N was encrypted by a system
N with different SID and cannot be decrypted here.
N
N Sun Jun 20 19:00:31 2010
N RSEC: The entry with identifier /RFC/DIICLNT800
N was encrypted by a system
N with different SID and cannot be decrypted here.
N RSEC: The entry with identifier /RFC/T90CLNT090
N was encrypted by a system
N with different SID and cannot be decrypted here.
X
X Sun Jun 20 19:01:59 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2214]
X
X Sun Jun 20 19:02:05 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2214]
M
M Sun Jun 20 19:04:02 2010
M ***LOG R49=> ThReceive, CPIC-Error (020223) [thxxhead.c 7488]
M ***LOG R5A=> ThReceive, CPIC-Error (76495728) [thxxhead.c 7493]
M ***LOG R64=> ThReceive, CPIC-Error ( CMSEND(SAP)) [thxxhead.c 7498]
N
N Sun Jun 20 19:05:31 2010
N RSEC: The entry with identifier /RFC/DIICLNT800
N was encrypted by a system
N with different SID and cannot be decrypted here.
N RSEC: The entry with identifier /RFC/T90CLNT090
N was encrypted by a system
N with different SID and cannot be decrypted here.
Thanks
Manii have few BG jobs running at backend, but i dont think that could be a problem. I have these jobs running
ESH_IX_PROCESS_CP_20100621051308
EU_PUT
EU_REORG
RPTMC_CREATE_CHANGEPOINT_AUTH
i cancelled the last one and first job is for trex indexing for changed object i SAP hR master data. middle two i dont know the purpose.
do you think these could be problem?
Mani -
pls help me to fix this problem.
log file...
2014-02-24 14:04:20.396 [1192:14d4]: restore library built Jan 7 2014 at 02:02:33
2014-02-24 14:04:20.397 [1192:14d4]: iTunes: iTunes 11.1.4.62
2014-02-24 14:04:20.397 [1192:14d4]: iTunes: Software payload version: 10B500
2014-02-24 14:04:20.397 [1192:14d4]: iTunes: Using iTunes state machine
2014-02-24 14:12:16.573 [1192:10d0]: iTunes: Specifying UOI boot image
2014-02-24 14:12:16.774 [1192:10d0]: requested restore behavior: Erase
2014-02-24 14:12:16.774 [1192:10d0]: requested variant: Erase
2014-02-24 14:12:16.997 [1192:10d0]: *** UUID B30995A9-9CBE-F743-9507-039BDD0D56EF ***
2014-02-24 14:12:17.390 [1192:10d0]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:12:22.429 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is True
2014-02-24 14:12:22.429 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreLogo" Digest = "<CFData 063BE060 [720A907C]>{length = 20, capacity = 20, bytes = 0x3ced32535b4f03e3cdd4f55d4d29e16bdf6b3536}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreDeviceTree" Digest = "<CFData 063BFF08 [720A907C]>{length = 20, capacity = 20, bytes = 0x8b90263d2d4d916029bb28321fe214b7056dab33}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreKernelCache" Digest = "<CFData 063BECC0 [720A907C]>{length = 20, capacity = 20, bytes = 0x7788d3144dbc9f173ff12878570d11c0cdff4e35}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreRamDisk" Digest = "<CFData 063BFDE8 [720A907C]>{length = 20, capacity = 20, bytes = 0x947ce636269ab8f999739b5a72d820c70102912a}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBEC" Digest = "<CFData 063BEC78 [720A907C]>{length = 20, capacity = 20, bytes = 0x86aa6a33d416b8183226d0b9188df879c0666e8a}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 063BF890 [720A907C]>{length = 20, capacity = 20, bytes = 0xd1534e338ae80b9b4addae3c77a83a6186fe75ab}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "KernelCache" Digest = "<CFData 063BFE78 [720A907C]>{length = 20, capacity = 20, bytes = 0x7788d3144dbc9f173ff12878570d11c0cdff4e35}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow1" Digest = "<CFData 063BF338 [720A907C]>{length = 20, capacity = 20, bytes = 0x79be5d2f2f7054aa2d7bdd5b66e3a0eca07a725b}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow0" Digest = "<CFData 063BFE30 [720A907C]>{length = 20, capacity = 20, bytes = 0x1abed33b398f978c681b346ea167eb26eaf3b38e}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 063BDF88 [720A907C]>{length = 20, capacity = 20, bytes = 0x21abcad73c393fb9d197b34403d52ec82643ffc4}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBoot" Digest = "<CFData 063BEC30 [720A907C]>{length = 20, capacity = 20, bytes = 0xfa0dc3003aeb828feda55a4ffb8027d10f054bce}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "DeviceTree" Digest = "<CFData 063BFDA0 [720A907C]>{length = 20, capacity = 20, bytes = 0x8b90263d2d4d916029bb28321fe214b7056dab33}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging1" Digest = "<CFData 063BFD58 [720A907C]>{length = 20, capacity = 20, bytes = 0xc504724a963b954e32478d6920311a32baca15b9}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging" Digest = "<CFData 063BFC38 [720A907C]>{length = 20, capacity = 20, bytes = 0x808a3980c646bd6d87921c9dba79c54a7759395a}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "AppleLogo" Digest = "<CFData 063BED08 [720A907C]>{length = 20, capacity = 20, bytes = 0x3ced32535b4f03e3cdd4f55d4d29e16bdf6b3536}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryPlugin" Digest = "<CFData 063BF578 [720A907C]>{length = 20, capacity = 20, bytes = 0x62d392da7901734968084e882ab8d687bc917be8}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryFull" Digest = "<CFData 063BFBA8 [720A907C]>{length = 20, capacity = 20, bytes = 0x059a392a0e7dccbfdc2f918cd59f4f5b4b140df8}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging0" Digest = "<CFData 063BF410 [720A907C]>{length = 20, capacity = 20, bytes = 0x421d229710239b268c3a2544a4fb161a3d6288aa}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RecoveryMode" Digest = "<CFData 063BF3C8 [720A907C]>{length = 20, capacity = 20, bytes = 0xa01b8483c6d2f2355569951d0e72df454f4432a7}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 063C3700 [720A907C]>{length = 20, capacity = 20, bytes = 0x9738ff132ae5b77833acdf2aa72af1558c4734d2}
2014-02-24 14:12:22.431 [1192:10d0]: amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
2014-02-24 14:12:22.685 [1192:10d0]: amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/RAKESH~1/AppData/Local/Temp/Per76A5.tmp/amai/debug/ts s-request.plist
2014-02-24 14:12:24.350 [1192:10d0]: amai: tss_submit_job: HttpQueryInfo returned 200
2014-02-24 14:12:25.032 [1192:10d0]: amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
2014-02-24 14:12:25.078 [1192:10d0]: amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/RAKESH~1/AppData/Local/Temp/Per76A5.tmp/amai/debug/ts s-response.plist
2014-02-24 14:12:26.597 [1192:10d0]: amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "Diags"
2014-02-24 14:12:27.466 [1192:3a4]: iBoot build-version = iBoot-1537.9.55
2014-02-24 14:12:27.467 [1192:3a4]: iBoot build-style = RELEASE
2014-02-24 14:12:27.468 [1192:3a4]: requested restore behavior: Erase
2014-02-24 14:12:27.469 [1192:3a4]: requested restore behavior: Erase
2014-02-24 14:12:27.471 [1192:3a4]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:27.472 [1192:3a4]: found device map entry for 0x00008930 0x00000008. boardConfig=n81ap platform=s5l8930x
2014-02-24 14:12:27.473 [1192:3a4]: _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
2014-02-24 14:12:27.474 [1192:3a4]: AMDeviceIoControl: GetOverlappedResult failed
2014-02-24 14:12:27.475 [1192:3a4]: AMDeviceIoControl: pipe stall
2014-02-24 14:12:27.476 [1192:3a4]: USBControlTransfer: error 31, usbd status c0000004
2014-02-24 14:12:27.477 [1192:3a4]: command device request for 'getenv radio-error' failed: 2008
2014-02-24 14:12:27.477 [1192:3a4]: radio-error not set
2014-02-24 14:12:27.478 [1192:3a4]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:27.480 [1192:3a4]: <Recovery Mode Device 025E0430>: production fused device
2014-02-24 14:12:27.481 [1192:3a4]: requested restore behavior: Erase
2014-02-24 14:12:27.481 [1192:3a4]: requested restore behavior: Erase
2014-02-24 14:12:27.482 [1192:3a4]: interface has 1 endpoints, file pipe = 1
2014-02-24 14:12:27.482 [1192:3a4]: <Recovery Mode Device 025E0430>: operation 4 progress -1
2014-02-24 14:12:30.448 [1192:3a4]: bootstrapping restore with iBEC
2014-02-24 14:12:30.449 [1192:3a4]: requested restore behavior: Erase
2014-02-24 14:12:30.463 [1192:3a4]: <Recovery Mode Device 025E0430>: operation 31 progress -1
2014-02-24 14:12:31.463 [1192:3a4]: <Recovery Mode Device 025E0430>: Recovery mode succeeded
2014-02-24 14:12:37.516 [1192:17a4]: WinAMRestore::OnInterfaceRemoval: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#7caf03a 3
2014-02-24 14:12:37.521 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4
2014-02-24 14:12:37.590 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:37.622 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:37.651 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:37.664 [1192:17a4]: AppleDevice::SetNotification: CONNECT, interface type: 1, id: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4, inst: 0x10bf1a50
2014-02-24 14:12:37.664 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList, new device
2014-02-24 14:12:37.665 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4
2014-02-24 14:12:37.692 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:37.716 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:37.739 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:37.869 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList, device already connected, new interface
2014-02-24 14:12:37.869 [1192:17a4]: AppleDevice::SetDeviceID: AMD_INTERFACE_IBOOT \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4, inst: 0x10bf1a50
2014-02-24 14:12:37.869 [1192:17a4]: AppleDevice::SetNotification: CONNECT, interface type: 1, id: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4, inst: 0x10bf1a50
2014-02-24 14:12:37.869 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 2, connected: 1
2014-02-24 14:12:37.869 [1192:17a4]: AppleDevice::NotifyDisconnect: IBOOT, IBOOT \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#7caf03a 3, inst: 0x63eb870
2014-02-24 14:12:37.869 [1192:17a4]: IBOOT, DFU \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3, inst: 0x63eb870
2014-02-24 14:12:37.869 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 1, connected: 0
2014-02-24 14:12:37.869 [1192:17a4]: AppleDevice::NotifyConnect: Device type: 2, Interfaces total: 2, arrived: 2
2014-02-24 14:12:37.870 [1192:17a4]: AppleDevice::NotifyConnect: IBOOT, IBOOT \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4, inst: 0x10bf1a50
2014-02-24 14:12:37.870 [1192:17a4]: IBOOT, DFU \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4, inst: 0x10bf1a50
2014-02-24 14:12:37.874 [1192:1558]: Recovery mode device disconnected
2014-02-24 14:12:37.874 [1192:1558]: Recovery mode device disconnected
2014-02-24 14:12:37.877 [1192:1558]: Recovery mode device connected
2014-02-24 14:12:37.877 [1192:1558]: Found new device.
2014-02-24 14:12:37.880 [1192:1450]: _AMRecoveryModeDeviceFinalize: 025E0430
2014-02-24 14:12:37.881 [1192:14d4]: iTunes: SCEP 2
2014-02-24 14:12:37.969 [1192:544]: iBoot build-version = iBoot-1537.9.55
2014-02-24 14:12:37.970 [1192:544]: iBoot build-style = RELEASE
2014-02-24 14:12:37.970 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 44 progress -1
2014-02-24 14:12:37.970 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:37.970 [1192:544]: requested variant: Erase
2014-02-24 14:12:37.971 [1192:544]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "RestoreKernelCache" has been previously personalized; skipping it
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "RestoreRamDisk" has been previously personalized; skipping it
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBEC" has been previously personalized; skipping it
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "KernelCache" has been previously personalized; skipping it
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
2014-02-24 14:12:38.675 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:38.676 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:38.676 [1192:544]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:38.677 [1192:544]: found device map entry for 0x00008930 0x00000008. boardConfig=n81ap platform=s5l8930x
2014-02-24 14:12:38.677 [1192:544]: _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
2014-02-24 14:12:38.677 [1192:544]: AMDeviceIoControl: GetOverlappedResult failed
2014-02-24 14:12:38.677 [1192:544]: AMDeviceIoControl: pipe stall
2014-02-24 14:12:38.677 [1192:544]: USBControlTransfer: error 31, usbd status c0000004
2014-02-24 14:12:38.677 [1192:544]: command device request for 'getenv radio-error' failed: 2008
2014-02-24 14:12:38.677 [1192:544]: radio-error not set
2014-02-24 14:12:38.677 [1192:544]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:38.678 [1192:544]: <Recovery Mode Device 025DFDD0>: production fused device
2014-02-24 14:12:38.678 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:38.678 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:38.679 [1192:544]: interface has 1 endpoints, file pipe = 1
2014-02-24 14:12:38.679 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 4 progress -1
2014-02-24 14:12:41.655 [1192:544]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:41.656 [1192:544]: found device map entry for 0x00008930 0x00000008. boardConfig=n81ap platform=s5l8930x
2014-02-24 14:12:41.656 [1192:544]: _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
2014-02-24 14:12:41.656 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:41.659 [1192:544]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:12:41.661 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:41.664 [1192:544]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:12:41.666 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 42 progress -1
2014-02-24 14:12:41.666 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:41.669 [1192:544]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:12:42.160 [1192:17a4]: WinAMRestore::OnInterfaceRemoval: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3
2014-02-24 14:12:42.163 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4
2014-02-24 14:12:42.231 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:42.285 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:42.340 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:42.364 [1192:17a4]: AppleDevice::SetNotification: NONE, interface type: 0, id: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4, inst: 0x10bf1a50
2014-02-24 14:12:42.367 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4
2014-02-24 14:12:42.432 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:42.487 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:42.541 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:42.566 [1192:17a4]: AppleDevice::SetNotification: NONE, interface type: 0, id: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4, inst: 0x10bf1a50
2014-02-24 14:12:42.567 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 2, connected: 0
2014-02-24 14:12:42.567 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 0, connected: 1
2014-02-24 14:12:42.706 [1192:544]: AMDeviceIoControl: GetOverlappedResult failed
2014-02-24 14:12:42.706 [1192:544]: AMDeviceIoControl: pipe stall
2014-02-24 14:12:42.706 [1192:544]: USBControlTransfer: error 31, usbd status c0000004
2014-02-24 14:12:42.706 [1192:544]: command device request for 'getenv ramdisk-size' failed: 2008
2014-02-24 14:12:42.707 [1192:544]: Unable to query iBoot ramdisk-size. Libusbrestore error : 67108864
2014-02-24 14:12:42.707 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 5 progress -1
2014-02-24 14:12:43.100 [1192:544]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:43.100 [1192:544]: found device map entry for 0x00008930 0x00000008. boardConfig=n81ap platform=s5l8930x
2014-02-24 14:12:43.100 [1192:544]: _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
2014-02-24 14:12:43.102 [1192:544]: AMDeviceIoControl: GetOverlappedResult failed
2014-02-24 14:12:43.102 [1192:544]: AMDeviceIoControl: pipe stall
2014-02-24 14:12:43.102 [1192:544]: USBControlTransfer: error 31, usbd status c0000004
2014-02-24 14:12:43.102 [1192:544]: command device request for 'getenv ramdisk-delay' failed: 2008
2014-02-24 14:12:44.141 [1192:17a4]: WinAMRestore::OnInterfaceArrival: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4
2014-02-24 14:12:44.141 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4
2014-02-24 14:12:44.187 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:44.227 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:44.260 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:44.272 [1192:17a4]: AppleDevice::SetNotification: NONE, interface type: 0, id: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4, inst: 0x10bf1a50
2014-02-24 14:12:44.272 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 2, connected: 0
2014-02-24 14:12:44.272 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 0, connected: 1
2014-02-24 14:12:44.361 [1192:17a4]: WinAMRestore::OnInterfaceArrival: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4
2014-02-24 14:12:44.361 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4
2014-02-24 14:12:44.389 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:44.412 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:44.435 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:44.446 [1192:17a4]: AppleDevice::SetNotification: NONE, interface type: 0, id: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4, inst: 0x10bf1a50
2014-02-24 14:12:44.446 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 2, connected: 0
2014-02-24 14:12:44.446 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 0, connected: 1
2014-02-24 14:12:45.138 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 6 progress -1
2014-02-24 14:12:46.148 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 7 progress -1
2014-02-24 14:12:46.482 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 8 progress -1
2014-02-24 14:12:46.483 [1192:544]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:46.484 [1192:544]: found device map entry for 0x00008930 0x00000008. boardConfig=n81ap platform=s5l8930x
2014-02-24 14:12:46.484 [1192:544]: _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
2014-02-24 14:12:46.485 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 9 progress -1
2014-02-24 14:12:46.485 [1192:544]: <Recovery Mode Device 025DFDD0>: Recovery mode succeeded
2014-02-24 14:12:48.195 [1192:17a4]: WinAMRestore::OnInterfaceRemoval: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4
2014-02-24 14:12:48.200 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 2, connected: 0
2014-02-24 14:12:48.201 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 2, connected: 1
2014-02-24 14:12:48.201 [1192:17a4]: AppleDevice::NotifyDisconnect: IBOOT, IBOOT \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4, inst: 0x10bf1a50
2014-02-24 14:12:48.201 [1192:17a4]: IBOOT, DFU \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4, inst: 0x10bf1a50
2014-02-24 14:12:48.210 [1192:1450]: Recovery mode device disconnected
2014-02-24 14:12:48.211 [1192:1450]: Recovery mode device disconnected
2014-02-24 14:12:48.214 [1192:1558]: _AMRecoveryModeDeviceFinalize: 025DFDD0
2014-02-24 14:12:48.382 [1192:17a4]: WinAMRestore::OnInterfaceRemoval: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4
2014-02-24 14:12:48.384 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 2, connected: 0
2014-02-24 14:12:48.384 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 2, connected: 0
2014-02-24 14:13:00.982 [1192:cfc]: Mux version 3 event happened
2014-02-24 14:13:00.982 [1192:cfc]: Passing control to mux version 2 handler
2014-02-24 14:13:00.983 [1192:cfc]: Muxed mode device connected
2014-02-24 14:13:01.049 [1192:e7c]: <Restore Device 0641A9E8>: operation 3 progress -1
2014-02-24 14:13:01.055 [1192:e7c]: <Restore Device 0641A9E8>: operation 4 progress -1
2014-02-24 14:13:01.266 [1192:1664]: received kAMDeviceAttached action, device id E80CE514C875BC07 (0641AB88), AFC error 0XE8000028
2014-02-24 14:13:01.266 [1192:1664]: iTunes: Restore-mode device appeared, device 0641AB88
2014-02-24 14:13:01.266 [1192:1664]: iTunes: Creating restore mode device with usbMuxDeviceID 0X1
2014-02-24 14:13:01.267 [1192:1664]: <Restore Device 06F59780>: operation 3 progress -1
2014-02-24 14:13:01.272 [1192:1664]: <Restore Device 06F59780>: operation 4 progress -1
2014-02-24 14:13:01.297 [1192:e7c]: Supports value queries: 1
2014-02-24 14:13:01.300 [1192:1664]: Supports value queries: 1
2014-02-24 14:13:01.314 [1192:e7c]: value query for 'SerialNumber' returned 'C3VDMTBQDCP9'
2014-02-24 14:13:01.314 [1192:e7c]: <Restore Device 0641A9E8>: operation 3 progress -1
2014-02-24 14:13:01.321 [1192:e7c]: <Restore Device 0641A9E8>: operation 4 progress -1
2014-02-24 14:13:01.326 [1192:e7c]: Supports value queries: 1
2014-02-24 14:13:01.336 [1192:1154]: Found new device
2014-02-24 14:13:01.368 [1192:f44]: <Restore Device 06F59780>: operation 44 progress -1
2014-02-24 14:13:01.368 [1192:f44]: requested restore behavior: Erase
2014-02-24 14:13:01.368 [1192:f44]: requested variant: Erase
2014-02-24 14:13:01.372 [1192:f44]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "RestoreKernelCache" has been previously personalized; skipping it
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "RestoreRamDisk" has been previously personalized; skipping it
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBEC" has been previously personalized; skipping it
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "KernelCache" has been previously personalized; skipping it
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
2014-02-24 14:13:02.147 [1192:f44]: requested restore behavior: Erase
2014-02-24 14:13:02.149 [1192:f44]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:13:02.166 [1192:f44]: fixed TcpWindowSize (65535) can cause restore failure if too large
2014-02-24 14:13:02.238 [1192:f44]: device did not return saved USB log
2014-02-24 14:13:02.238 [1192:f44]: device had saved panic logs: panic(cpu 0 caller 0x80632111): "partition scheme present; however, no partition devices were created"@/SourceCache/IOFlashStorage/IOFlashStorage-558.4/IOFlashPartitionSchem e.cpp:267
Debugger message: panic
OS version: 9A405
Kernel version: Darwin Kernel Version 11.0.0: Tue Nov 1 20:33:58 PDT 2011; root:xnu-1878.4.46~1/RELEASE_ARM_S5L8930X
iBoot version: iBoot-1219.43.32
secure boot?: YES
Paniclog version: 1
Epoch Time: sec usec
Boot : 0x526e9493 0x00000000
Sleep : 0x00000000 0x00000000
Wake : 0x00000000 0x00000000
Calendar: 0x526e94a6 0x000e2944
Task 0xc0562d20: 2451 pages, 81 threads: pid 0: kernel_task
thread 0xc064b230
kernel backtrace: cb643e2c
lr: 0x8007cc6b fp: 0xcb643e58
lr: 0x8007d26f fp: 0xcb643e88
lr: 0x80016391 fp: 0xcb643ea0
lr: 0x80632111 fp: 0xcb643ecc
lr: 0x806323b9 fp: 0xcb643ee0
lr: 0x8020dd3b fp: 0xcb643f18
lr: 0x8020db31 fp: 0xcb643f5c
lr: 0x8020e509 fp: 0xcb643f80
lr: 0x8020e2e5 fp: 0xcb643fa8
lr: 0x8007b37c fp: 0x00000000
Task 0xc0562ac0: 283 pages, 3 threads: pid 1: launchd
Task 0xc0562860: 515 pages, 1 threads: pid 2: launchctl
Task 0xc0562600: 690 pages, 1 threads: pid 3: restored_externa
Task 0xc05623a0: 3000 pages, 2 threads: pid 4: restored_externa
2014-02-24 14:13:02.248 [1192:f44]: connected to service com.apple.mobile.restored
2014-02-24 14:13:02.248 [1192:f44]: using protocol version 12
2014-02-24 14:13:02.256 [1192:f44]: unable to open device_map.txt: No such file or directory
2014-02-24 14:13:02.257 [1192:f44]: board config = n81ap
2014-02-24 14:13:02.264 [1192:f44]: no value returned for BootArgs
2014-02-24 14:13:02.264 [1192:f44]: _copyDeviceProperty() failed for restore bootargs
2014-02-24 14:13:02.272 [1192:f44]: no value returned for MarketingPartNumber
2014-02-24 14:13:02.272 [1192:f44]: _copyDeviceProperty() failed for mpn
2014-02-24 14:13:02.273 [1192:f44]: requested restore behavior: Erase
2014-02-24 14:13:02.274 [1192:f44]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:13:02.285 [1192:f44]: value query for 'HardwareModel' returned 'N81AP'
2014-02-24 14:13:32.300 [1192:f44]: <Restore Device 06F59780>: operation 28 progress -1
2014-02-24 14:13:32.364 [1192:f44]: device returned CFError with code 40
2014-02-24 14:13:32.364 [1192:f44]: dumping CFError returned by restored:
2014-02-24 14:13:32.364 [1192:f44]: CFError domain:AMRestoreErrorDomain code:40 description:storage device did not become available
2014-02-24 14:13:32.384 [1192:f44]:
==== device restore output ====
"P=N81 m=2.2 V=m"
AppleBCMWLANBusInterfaceSdio::start(): Started by: IOSDIOIoCardDevice, AppleBCMWLANV2-169.10 Feb 13 2013 22:10:14
AppleBCMWLANCore::init(): AppleBCMWLANV2-169.10 Feb 13 2013 22:10:17
000522.906303 wlan.W[0] AppleBCMWLANProvisioningManager::parseApplePrivateCIS(): @24 - Invalid 2.4 GHz Cal data in tuple 0x02
000522.907778 wlan.N[1] AppleBCMWLANProvisioningManager::handleBluetoothRegistrationGated(): Wrote bluetooth Mac Addr <<<mac address>>>
000522.909596 wlan.N[2] AppleBCMWLANConfigManager::gatherParameterData(): AWDL is not supported.
000522.914563 wlan.N[3] AppleBCMWLANCore:start(): Starting with MAC Address: <<<mac address>>>
000522.914795 wlan.W[4] AppleBCMWLANCore::apple80211Request(): Rejecting ioctl 80, error 61 (state 0x20)
IO80211PeerManager::initWithInterface cant add monitoring timer
IO80211PeerManager::initWithInterface: inited peer manager
IO80211Interface::init peerManager=0x916e0600
000522.916824 wlan.N[5] AppleBCMWLANCore::setPowerStateGated(): powerState 1, fStateFlags 0x20, dev 0x83b41000 (this 1, provider 0)
000522.916944 wlan.N[6] AppleBCMWLANCore::setPowerStateGated(): Received power state change before driver has initialized, ignoring
display-scale = 2
display-rotation = 0
found suitable IOMobileFramebuffer: AppleCLCD
display: 640 x 960
found PTP interface
AppleSynopsysOTGDevice - Configuration: PTP
AppleSynopsysOTGDevice Interface: PTP
AppleSynopsysOTGDevice - Configuration: iPod USB Interface
AppleSynopsysOTGDevice Interface: USBAudioControl
AppleSynopsysOTGDevice Interface: USBAudioStreaming
AppleSynopsysOTGDevice Interface: IapOverUsbHid
AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device
AppleSynopsysOTGDevice Interface: PTP
AppleSynopsysOTGDevice Interface: AppleUSBMux
AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device + Apple USB Ethernet
AppleSynopsysOTGDevice Interface: PTP
AppleSynopsysOTGDevice Interface: AppleUSBMux
AppleSynopsysOTGDevice Interface: AppleUSBEthernet
AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioControl
AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioStreaming
IOAccessoryPortUSB::start
AppleSynopsysOTGDevice::gated_registerFunction Register function IapOverUsbHid
virtual bool AppleUSBDeviceMux::start(IOService *) build: Feb 13 2013 22:02:59
init_waste
AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBMux
AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBEthernet
AppleSynopsysOTGDevice::gated_registerFunction Register function PTP
AppleSynopsysOTGDevice::startUSBStack Starting usb stack
IOReturn AppleUSBDeviceMux::setPropertiesGated(OSObject *) setting debug level to 7
read new style signature 0x43313131 (line:389)
[FTL:MSG] VSVFL Register [OK]
[WMR:MSG] Metadata whitening is set in NAND signature
[FTL:MSG] VFL Init [OK]
[VFL:ERR] _LoadVFLCxt(line:1479) fail CS 1!
[VFL:ERR] _LoadVFLCxt(wCSIdx:1)(line 1779) fail!
[WMR:ERR] VFL_Open failed
AppleNANDLegacyFTL::start: AND init failed
AppleUSBDeviceMux::handleConnectResult new session 0x90fcce70 established 62078<-lo0->49152 62078<-usb->512
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(12, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(15, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(18, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x90fcce70
AppleUSBDeviceMux::handleConnectResult new session 0x90fcce70 established 62078<-lo0->49153 62078<-usb->768
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x90fcce70
AppleUSBDeviceMux::handleConnectResult new session 0x90fcce70 established 62078<-lo0->49154 62078<-usb->1024
AppleUSBDeviceMux::handleConnectResult new session 0x91816210 established 62078<-lo0->49155 62078<-usb->1280
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x91816210
AppleUSBDeviceMux::handleConnectResult new session 0x91816210 established 62078<-lo0->49156 62078<-usb->1536
AppleUSBDeviceMux::handleConnectResult new session 0x91816268 established 62078<-lo0->49157 62078<-usb->1792
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49158 62078<-usb->2048
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x91816268
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x90fcce70
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x90fcce70 established 62078<-lo0->49159 62078<-usb->2304
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49160 62078<-usb->2560
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49161 62078<-usb->2816
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49162 62078<-usb->3072
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49163 62078<-usb->3328
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49164 62078<-usb->3584
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
unrecognized key 'BootArgs' in value query
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
unrecognized key 'MarketingPartNumber' in value query
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
client protocol version 13
*** UUID B30995A9-9CBE-F743-9507-039BDD0D56EF ***
Restore options:
UUID => <CFString 0x1ed27a50 [0x32b100]>{contents = "B30995A9-9CBE-F743-9507-039BDD0D56EF"}
MinimumSystemPartition => <CFNumber 0x1ed279a0 [0x32b100]>{value = +1152, type = kCFNumberSInt64Type}
SystemPartitionSize => <CFNumber 0x1ed28300 [0x32b100]>{value = +1152, type = kCFNumberSInt64Type}
SystemPartitionPadding => <CFBasicHash 0x1ed27470 [0x32b100]>{type = mutable dict, count = 5,
entries =>
2 : <CFString 0x1ed277b0 [0x32b100]>{contents = "128"} = <CFNumber 0x1ed279d0 [0x32b100]>{value = +1280, type = kCFNumberSInt64Type}
3 : <CFString 0x1ed27ce0 [0x32b100]>{contents = "16"} = <CFNumber 0x1ed27a00 [0x32b100]>{value = +160, type = kCFNumberSInt64Type}
4 : <CFString 0x1ed1f1a0 [0x32b100]>{contents = "32"} = <CFNumber 0x1ed274d0 [0x32b100]>{value = +320, type = kCFNumberSInt64Type}
5 : <CFString 0x1ed27100 [0x32b100]>{contents = "8"} = <CFNumber 0x1ed282f0 [0x32b100]>{value = +80, type = kCFNumberSInt64Type}
8 : <CFString 0x1ed274e0 [0x32b100]>{contents = "64"} = <CFNumber 0x1ed27340 [0x32b100]>{value = +640, type = kCFNumberSInt64Type}
entering partition_nand_device
device supports boot-from-NAND
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49165 62078<-usb->3840
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49166 62078<-usb->4096
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49167 62078<-usb->4352
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49168 62078<-usb->4608
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49169 62078<-usb->4864
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
[IOFlashPartitionScheme:ERR] AppleNANDFTL initialization failed
[nand_part_core:ERR@ 429] no fbbt service available
[nand_part_core:BUG@3024] failed to create partition devices
unable to check is-bfn-partitioned property
nand device is already partitioned
entering wait_for_storage_device
Searching for NAND service
Found NAND service: IOFlashStoragePartition
NAND failed to initialize: No additional error message.
==== end of device restore output ====
2014-02-24 14:13:32.384 [1192:f44]: AMRAuthInstallDeletePersonalizedBundle
2014-02-24 14:13:32.892 [1192:f44]: <Restore Device 06F59780>: Restore failed (result = 40)
2014-02-24 14:13:33.517 [1192:14d4]: iTunes: Restore error 40
2014-02-24 14:15:03.369 [1192:120]: Looking up device with muxID:1
2014-02-24 14:15:03.369 [1192:120]: Muxed device disconnected
2014-02-24 14:15:03.369 [1192:120]: RestoreOS mode device disconnected
2014-02-24 14:15:09.873 [1192:17a4]: WinAMRestore::OnInterfaceArrival: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#7caf03a 3
2014-02-24 14:15:09.873 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#7caf03a 3
2014-02-24 14:15:09.916 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:15:09.955 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:15:09.993 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:15:10.011 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
2014-02-24 14:15:10.011 [1192:17a4]: AppleDevice::SetNotification: CONNECT, interface type: 1, id: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#7caf03a 3, inst: 0x63eb870
2014-02-24 14:15:10.011 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 1, connected: 0
2014-02-24 14:15:10.011 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 2, connected: 0
2014-02-24 14:15:10.011 [1192:17a4]: AppleDevice::NotifyConnect: Device type: 2, Interfaces total: 2, arrived: 1
2014-02-24 14:15:10.011 [1192:17a4]: AppleDevice::NotifyConnect: Interfaces total != arrived, no notification
2014-02-24 14:15:10.123 [1192:17a4]: WinAMRestore::OnInterfaceArrival: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3
2014-02-24 14:15:10.123 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3
2014-02-24 14:15:10.165 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:15:10.188 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:15:10.211 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:15:10.223 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList, device already connected, new interface
2014-02-24 14:15:10.223 [1192:17a4]: AppleDevice::SetDeviceID: AMD_INTERFACE_DFU \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3, inst: 0x63eb870
2014-02-24 14:15:10.223 [1192:17a4]: AppleDevice::SetNotification: CONNECT, interface type: 1, id: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3, inst: 0x63eb870
2014-02-24 14:15:10.223 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 1, connected: 1
2014-02-24 14:15:10.223 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 2, connected: 0
2014-02-24 14:15:10.223 [1192:17a4]: AppleDevice::NotifyConnect: Device type: 2, Interfaces total: 2, arrived: 2
2014-02-24 14:15:10.223 [1192:17a4]: AppleDevice::NotifyConnect: IBOOT, IBOOT \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#7caf03a 3, inst: 0x63eb870
2014-02-24 14:15:10.223 [1192:17a4]: IBOOT, DFU \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3, inst: 0x63eb870
2014-02-24 14:15:10.230 [1192:1230]: Recovery mode device connected
2014-02-24 14:15:10.231 [1192:1230]: Found new device.
2014-02-24 14:15:10.241 [1192:14d4]: iTunes: SCEP 2Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem
Maybe you are looking for
-
New iPhone 5 and existing iCloud account
I recently got my wife an iPhone 5 for the holidays. We are a multiple Apple family with 2 iPads, iPods, etc... Problem is, I set up her new iPhone on my existing iCloud account with out realizing it would send all my messages and contacts to her pho
-
I want to change my iCloud account and password without losing info that has been backed up.
-
External hard drive does not work
I bought an external USB hard drive. At first, it worked. I could see an icon on my desktop and could load some stuff onto it. Then I unplugged it (probably the wrong way, I just unplugged it) and when I replugged it, I could not see the icon anymore
-
How to write "Conn. info" in "dbco"
i want to connect to oracle . i do not know hot to set "Conn. info " field when use tcode "dbco" who can give a example? pls help me
-
How to edit a web header previously designed in PSE 9
Hi just started using PSE9 I designed a header in PSE9 and got it saved on my computer. I now want to change it. How do I get it back into PSE9 so I can edit it , move text around etc. I cannot see the layers etc Many thanks