Log file non-mac-based version of client? And CGBitmapContextGetData:invali

I'm not sure if this is a security problem. I had to completely reset my airport yesterday and today re installed my remote back-up. My keychain is messing up. I don't know if these logs are normal or if something is amiss. My IP address before resetting it yesterday started with a 169 which means something ... please if someone can let me know if there is something i should do or if there are any questions i can answer. thank you.
Jul 24 17:12:20 Macintosh com.apple.coreservicesd[47]: NOTE: Using non-mach-based version of client -> server communication, via direct function calls.
Jul 24 17:12:20 Macintosh com.apple.coreservicesd[47]: NOTE: Using non-mach-based version of client -> server communication, via direct function calls.
Jul 24 17:17:12 Macintosh com.apple.launchd[110] ([0x0-0x68068].com.apple.systempreferences[538]): Exited: Terminated
Jul 24 17:17:12 Macintosh com.apple.coreservicesd[47]: NOTE: Using non-mach-based version of client -> server communication, via direct function calls.
Jul 24 17:25:45: --- last message repeated 1 time ---
Jul 24 17:25:45 Macintosh com.apple.coreservicesd[47]: NOTE: Using non-mach-based version of client -> server communication, via direct function calls.
Jul 24 17:28:45: --- last message repeated 1 time ---
Jul 24 17:28:45 Macintosh /usr/sbin/ocspd[676]: starting
Jul 24 17:29:33 Macintosh com.apple.coreservicesd[47]: NOTE: Using non-mach-based version of client -> server communication, via direct function calls.
Jul 24 17:29:37: --- last message repeated 1 time ---
Jul 24 17:29:37 Macintosh Microsoft Word[679]: CGBitmapContextGetData: invalid context
Jul 24 17:29:59: --- last message repeated 189 times ---
Jul 24 17:29:59 Macintosh com.apple.coreservicesd[47]: NOTE: Using non-mach-based version of client -> server communication, via direct function calls.
Jul 24 17:29:59: --- last message repeated 1 time ---
Jul 24 17:29:59 Macintosh Microsoft Word[679]: CGBitmapContextGetData: invalid context
Jul 24 17:30:02: --- last message repeated 204 times ---
Jul 24 17:30:02 Macintosh com.apple.coreservicesd[47]: NOTE: Using non-mach-based version of client -> server communication, via direct function calls.
Jul 24 17:30:02: --- last message repeated 1 time ---
Jul 24 17:30:02 Macintosh Microsoft Word[679]: CGBitmapContextGetData: invalid context
Jul 24 17:30:31: --- last message repeated 2355 times ---
Jul 24 17:30:31 Macintosh Microsoft Word[679]: doClip: empty path.
Jul 24 17:30:31 Macintosh Microsoft Word[679]: CGBitmapContextGetData: invalid context
Jul 24 17:30:32: --- last message repeated 70 times ---
Jul 24 17:30:31 Macintosh [0x0-0x84084].com.microsoft.Word[679]: Thu Jul 24 17:30:31 Macintosh.local Microsoft Word[679] <Error>: doClip: empty path.
Jul 24 17:30:32 Macintosh Microsoft Word[679]: CGBitmapContextGetData: invalid context
Jul 24 17:30:49: --- last message repeated 1066 times ---

BAM! I had tried to disable my scheduled task, and it didn't seem to make a difference. I saw your reply and decided to just delete the scheduled task. My "6/29/09 10:46:39 AM com.apple.coreservicesd[74] NOTE: Using non-mach-based version of client -> server communication, via direct function calls." seem to be gone now.
2 things: 1) My scheduled task was a "When the drive is connected" type
2) I had originally "unchecked" this task, but when I went back in at a later date, it was checked. So either my user error, or somehow CCC re-enabled it.
I was really getting sick of my log getting pummeled.

Similar Messages

Location of query log files in OBIEE 11g (version 11.1.1.5)

Hi,
I wish to know the Location of query log files in OBIEE 11g (version 11.1.1.5)??

Hi,
Log Files in OBIEE 11g
Login to the URL http://server.domain:7001/em and navigate to:
Farm_bifoundation_domain-> Business Intelligence-> coreapplications-> Dagnostics-> Log Messages
You will find the available files:
Presentation Services Log
Server Log
Scheduler Log
JavaHost Log
Cluster Controller Log
Action Services Log
Security Services Log
Administrator Services Log
However, you can also review them directly on the hard disk.
The log files for OBIEE components are under <OBIEE_HOME>/instances/instance1/diagnostics/logs.
Specific log files and their location is defined in the following table:
Log Location
Installation log                     <OBIEE_HOME>/logs
nqquery log <OBIEE_HOME>/instances/instance1/diagnostics/logs/OracleBIServerComponent/coreapplication_obis1
nqserver log <OBIEE_HOME>/instances/instance1/diagnostics/logs/OracleBIServerComponent/coreapplication_obis1
servername_NQSAdminTool log      <OBIEE_HOME>/instances/instance1/diagnostics/logs/OracleBIServerComponent/coreapplication_obis1
servername_NQSUDMLExec log                          <OBIEE_HOME>/instances/instance1/diagnostics/logs/OracleBIServerComponent/coreapplication_obis1
servername_obieerpdmigrateutil log (Migration log)           <OBIEE_HOME>/instances/instance1/diagnostics/logs/OracleBIServerComponent/coreapplication_obis1
sawlog0 log (presentation)                          <OBIEE_HOME>/instances/instance1/diagnostics/logs/OracleBIPresentationServicesComponent/coreapplication_obips1
jh log (Java Host)                               <OBIEE_HOME>/instances/instance1/diagnostics/logs/OracleBIJavaHostComponent\coreapplication_obijh
webcatupgrade log (Web Catalog Upgrade)                <OBIEE_HOME>/instances/instance1/diagnostics/logs/OracleBIPresentationServicesComponent/coreapplication_obips1
nqscheduler log (Agents)                          <OBIEE_HOME>/instances/instance1/diagnostics/logsOracleBISchedulerComponent/coreapplication_obisch1
nqcluster log                                    <OBIEE_HOME>/instances/instance1/diagnostics/logs/OracleBIClusterControllerComponent\coreapplication_obiccs1
ODBC log                                    <OBIEE_HOME>/instances/instance1/diagnostics/logs/OracleBIODBCComponent/coreapplication_obips1
opmn log                                    <OBIEE_HOME>/instances/instance1/diagnostics/logs/OPMN/opmn
debug log                                    <OBIEE_HOME>/instances/instance1/diagnostics/logs/OPMN/opmn
logquery log                               <OBIEE_HOME>/instances/instance1/diagnostics/logs/OPMN/opmn
service log                                    <OBIEE_HOME>/instances/instance1/diagnostics/logs/OPMN/opmn
opmn out                              <OBIEE_HOME>/instances/instance1/diagnostics/logs/OPMN/opmn
Upgrade Assistant log                         <OBIEE_HOME>Oracle_BI1/upgrade/logs
Regards
MuRam

I have a IMac - Mac OSX version 10.4 and présently i see only verticals lines on my dashboard and my mouse still mouving but with a little square with vertical lines at the right. This appen when i was talking with a friend on Skype. I need help to unlook

I have a IMac - Mac OSX version 10.4 and présently i see only verticals lines on my desktop and my mouse, i mean the arrow and still mouving but with a little square with vertical lines at the right. This appened when i was talking with a friend on Skype, by error i did click on the video and slowly the vertical lines appeared and covered all ma desktop. Since then, it still there and the only things i see it is the vertical lines and the arrow with the little square.
How can i fix this problem ?
En français: j'ai un IMac - Mac OSX version 10.4 et présentement je vois seulement des lignes verticales sur mon bureau et ma souris c'est-à-dire la flèche, bouge mais il y a un petit carré avec aussi des lignes verticales à sa droite. Je pense que ce bug est survenu lorsque j'étais sur Skype avec une amie et que par erreur j'ai cliqué sur l'image de la vidéo et peu à peu les lignes sont appurues et tout l'écran est envahie par ces lignes.
Comment corriger le problème ? Merci à l'avance.
Réjeanne Blouin

Hello, sounds like Video card and/or heat problems.
Have you blown the dust out lately? Let it cool for an hour or so.
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
iStat Menus...
http://bjango.com/mac/istatmenus/
And/or iStat Pro...
http://www.islayer.com/apps/istatpro/
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode).

TRYING TO INSTALL adobe photoshop elements8 AND IM GETTING error opening installation log file. verify that the specified location exists and is writable

TRYING TO INSTALL adobe photoshop elements8 AND IM GETTING error opening installation log file. verify that the specified location exists and is writable

Error opening installation log file | Windows

ADE crashes when opening .ACSM file on Mac OSX 10.10.2 (and other OS versions)

I'm trying to use Adobe Digital Editions 4.0.3 to access downloaded ebooks from my public library. Whenever I import the downloaded .ACSM file, ADE crashes. I reopen it, and the book is there -- when I try to open it, it crashes. I try to transfer it to my e-reader, and (surprise!) it crashes.
I've also tried using earlier editions -- exact same problem. I've tried other downloaded .ACSM books -- crashes again. Has anybody found a solution to this problem?

Hello,
Please download the latest ADE 4.0.3.114137
http://www.adobe.com/solutions/ebook/digital-editions/download.html
Some of the crashes have been fixed in this release.
Thanks for being the part in product improvement.

Archived log file are not shifted to standby side and applied

Hi Guru's,
DB
My OS Version:Windows Server 2003
DB Version:11.2.0.1.0
I am trying to create Physical Standby DB on my test machine after setting all the parameters and start standby db in mount mode when i do the verification of archived log files that need to be shift from pri site to standby site i am getting:
no rows selected.
I am following the below mentioned doc for reference
http://docs.oracle.com/cd/E11882_01/server.112/e25608/create_ps.htm#i63561
Can anyone from your side can help me to sort out this problem.
Thanks in advance

vk82 wrote:
SQL> select max(sequence#) from v$archived_log;
MAX(SEQUENCE#)
39
SQL> select process,status,sequence# from v$managed_standby;
PROCESS STATUS SEQUENCE#
ARCH CLOSING 38
ARCH CLOSING 36
ARCH CONNECTED 0
ARCH CLOSING 37
SQL> select max(sequence#) from v$archived_log where applied='YES';
MAX(SEQUENCE#)
39
Yes the max sequence generated on primary is same as the max sequence applied on standby.
And what is MRP and why it is important can you please let me know abt thisWhenever you created standby database, Make a habit of tail to alert log file to monitor whats happening on the standby database, Besides MRP is an Media Recovery Process , which applies archies/redo on standby database.
MRP can apply based on the redo transport, If you are using real-time apply then Redo will be writtened to the standby redo log files at the same time recovery will be performed by MRP process, If you are not using Real-Time apply then whenever a archive generated on primary that archive will be transported to the standby and applied on the standby database.
It is recommended to use Realtime apply, so that you can avoid much data lost.
However you are in 11gR2, You can use below query to monitor
SQL> SELECT * FROM V$STANDBY_EVENT_HISTOGRAM WHERE NAME = 'apply lag' AND COUNT > 0;
NAME             TIME UNIT                  COUNT LAST_TIME_UPDATED
apply lag           0 seconds                 431 08/05/2012 22:14:21
apply lag           1 seconds                   7 08/05/2012 22:13:31
SQL>Edited by: CKPT on Nov 6, 2012 6:49 PM

I have a Mac OSX Version 10.4 and iphoto 6. I cannot upgrade to a later version of iphoto 6 because it requires a 10.5.6 or later. What can I do?

I have a Mac OSX version 10.4.11 and iphoto 6. I can no longer order cards, prints etc. and cannot upgrade to a newer version of iphoto because I don't meet the system requirements of 10.5.6 or later. What can I do?

Unless you upgrade the OS and then iPhoto, not a lot, I'm afraid.
Regards
TD

I work for a kitchen design firm and want to know if the is a mac based software for kitchen and bath designs

I am looking for a Mac based software program that is easy to use to design kitchens and baths.
Do you know of any?

A friend uses Google's SketchUp ... free, and it created isometric views that satisfied the city/county/neighborhood-association when building his deck.
"Free" is worth a look, I would guess.

Is there a Mac-based version of GSAK?

Is there anything available for an iMac that works like (or as close as possible to) GSAK (Geocaching Swiss Army Knife); i.e., downloading the .loc/.gpx files into it for viewing and uploading the Geocache's information (coordinates, etc.) into one's GPS device?

GSAK FAQs http://gsak.net/help/hs1070.htm#FAQ17
17. Will you be creating a GSAK version for the Macintosh?
In a word, NO. Windows is my native platform and is as much as I can handle. Note: GSAK has been known to run quite nicely under "Virtual PC", "Parallels", and "Boot camp" on the Mac. If you are looking for a native OSX GeoCaching application try MacCaching
Stefan

Can I set up a Non .mac Email Pop mail client Alias for sending SMTP mail?

I have a yahoo.com POP mail account - [email protected] When I'm lgged into Yahoo mail, this account can receive and send mail from serveral aliases - [email protected], [email protected], etc.
Using Tiger's mail.app, I can log into the Yahoo smtp server and get all my mail, including mail to the alias names.
I would like to be able to reply from my Mac's mail.app account, using one of the aliases, instead of my POP account name. In other words, I'd like the From field be listed as "[email protected]" and not "[email protected]"
In mail.app (v2.1) is there any way to do this?
Alan Sampson' suggestion doesn't work - when I set the From field to the alias name, it looks like mail tries to login to the yahoo SMTP server under the alias, and it gets rejected.
( - see http://discussions.apple.com/thread.jspa?messageID=2603372&#2603372 )
Go to Mail > Preferences > Accounts and under the Account Information tab for the primary email account preferences, enter all alias email addresses in the Email Address field for the account separate by a comma.
[email protected], [email protected], [email protected]
MacMini - 1.42 Mac OS X (10.4.7)
MacMini - 1.42 Mac OS X (10.4.6)
MacMini - 1.42 Mac OS X (10.4.7)

If Yahoo allows this, it should work. Open Mail Help, type alias in the search box, and read the article titled Adding multiple email alias addresses to an account. Could it be that you're trying to put the aliases in the wrong field (i.e. User Name rather than Email Address)? Or maybe it's Yahoo's SMTP server that doesn't allow you to do this?

I purchased a windows based ELEMENTS but meant to purchase a MAC based version. Can you help?

Can anyone direct me an easy way to exchange or cancel my order Elements order?
My credit card has not yet been processed nor have I downloaded the product cuz I mistakenly ordered a windows version instead of a mac version
Thanks

One last thing, Bob. Trying to maneuver the Adobe support site is very difficult. I often wonder about the geniuses that design these sites. I do not think they have ever used it. If so, they might better understand the old adage: more really is less. Perhaps it's me.
Cheers
Sent from my iPhone

How to set the file path dynamically based on sytem, username, and date

Hi All,
My requirement is upload the data into one structure like xyz that is related to t.code MCSZ.
file will be in UNIx SERVER .
PATH IS: /sapif
file name is xy789 load .txt
I have to write code in one user-exit
how can i set the file path for this.
shall i put hard code file path?
because i have to writecode in user-exit.
plz tell me how to set the file path based ons syetem, username, date
Thanks in advance
Ram.A

Concatenate the field SY-SYSID, SY-UNAME and SY-DATUM for the file path

Can't see MTS files using mac os 10.9.5 and adobe premiere elements 12

I am using a MacBook Pro and OS is 10.9.5. Adobe premiere elements 12 does not recognize MTS files from my SD card. The OS does not see MTS files from the card as well...but...I have an MTS file on my desktop from before I upgraded from 10.6.8 that can be seen by both Adobe and the new OS.
HELP

annejennifer
What are you using as your Add Media/ for the import of your .mts on the SD?
Not sure if the following is a viable question, but....
What happens if you transfer the .mts on the SD card to your computer desktop and then try to
import the .mts into Premiere Elements 12 with its Add Media/Files and Folder/Project Assets?
But on reflection, if your OS and Premiere Elements are both not seeing the file, this does not
present as a Premiere Elements issue, rather an issue between the .mts format and your Mac computer.
If that is a valid observation, have you gotten any input on this from Apple?
Have you looked into converting these .mts files into H.264.mov or .mp4 before use?
ATR
Add On....could you give us more information about the .mts file that you said that you have on your new
computer desktop and is being recognized by the OS and Premiere Elements 12?

Empty Log File - log settings will not save

Description of Problem or Question:
Cannot get logging to work in folder D:\Program Files\Business Objects\Dashboard and Analytics 12.0\server\log
(empty log file is created)
Product\Version\Service Pack\Fixpack (if applicable):
BO Enterorise 12.0
Relevant Environment Information (OS & version, java or .net & version, DB & version):
Server: windows Server 2003 Enterprise SP2.
Database Oracle 10g
Client : Vista
Sporadic or Consistent (if applicable):
Consistent
What has already been tried (where have you searched for a solution to your question/problem):
Searched forum, SMP
Steps to Reproduce (if applicable):
From InfoViewApp, logged in as Admin
Open ->Dashboard and Analytics Setp -> Parameters -> Trace
Check "Log to folder" and "SQL Queries", Click Apply.
Now, navigate away and return to this page - the "Log to folder" is unchecked. Empty log file is created.

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer
Do a backup.
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.systempreferences.plist. Move the .plist to your desktop.
Restart, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

Moving the log file of a publisher database SQL Server 2008

There are many threads on this here. Most of them not at all helpful and some of them wrong. Thus a fresh post.
This post regards SQL Server 2008 (10.0.5841)
The PUBLISHER database primary log file which is currently of 3 blocks and not extendable,
must be moved as the LUN is going away.
The database has several TB of data and a large number of push transactional replications as well as a couple of bi-directional replications.
While the primary log file is active, it is almost never (if ever) used due to its small fixed size.
We are in the 20,000 TPS range at peak (according to perfmon). This is a non-trivial installation.
This means that
backup/restore is not even a remotely viable option (it never is in the real world)
downtime minimization is critical - measured in minutes or less.
dismantling and recreating the replications is doable, but I have to say, I have zero trust in the script writer to generate accurate scripts. Many of these replications were originally set up in older versions of SQL Server and have come along for the
ride as upgrades have occurred. I consider scripting everything and dismantling the whole lot pretty high risk. In any case, I do not want to have to reinitialize any replications as this takes, effectively, an eternity.
Possible solution:
The only option I can think of is to wind down everything, such that there are zero outstanding uncommitted transactions and detach the database, delete the offending log file and reattach using the CREATE DATABASE xyz ATTACH_REBUILD_LOG option.
This should, if I have understood things correctly, cause SQL Server to recreate the default log file in the same directory as the .mdf file. I am not sure what will happen to the secondary log file which is not moving anywhere at this point.
The hard bit is insuring that every transaction in the active log files have been replicated before shutdown. This is probably doable. I do not know how to manually flush any left over transactions to replication. I expect if I shut down all "real"
activity and wait for a certain amount of time, eventually all the replications will show "No replicated transactions are available" and then I would be good to go.
Hillary, if you happen to be there, comments appreciated.

Hi Philip
you should try this long back suggested way of stopping replication and restore db and rename or detach attach
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/6731803b-3efa-4820-a303-4ffb7edf154a/detaching-a-replicated-database?forum=sqlreplication
Thanks
Saurabh Sinha
http://saurabhsinhainblogs.blogspot.in/
Please click the Mark as answer button and vote as helpful
if this reply solves your problem
I do not wish to be rude, but which part of the OP didn't you understand?
Specifically the bit about 20,000 transactions a second and database size of several TB. Do you have any concept whatsoever of what this means? I will answer for you, "no, you are clueless" as your answer clearly shows.
Stop wasting bandwidth by proposing pointless and wrong solutions which indicate that you did not read the OP, or do you just do this to generate points?
Also, you clearly failed to notice that I was on the thread to which you referred, and I had some pointed comments to make. This thread was an attempt to garner some input for an alternative proposal.

Log file non-mac-based version of client? And CGBitmapContextGetData:invali

Similar Messages

Maybe you are looking for