Log files and RSconfig file is not creatd after Reinstall the SSRS part?

HI guyz,
I have problem with my Subscription to send the emails using SMTP ,to resollving that i have uninstall and install the SSRS part
after install the SSRS part i have not found any RSConfig file and Logfiles,Here i have made one change that is after unisntall the SSRS i have changed the Report server folder name to ReportServer_old ,After that i have I have installed the SSRS part
now i will not getting any Logfiels and RSconfig file also,
And now also i am not able to send the emails using Subscription
I have facing this issue still long time back,
The error which am getting here is ,
transport server Failed to send emails
I have done all the config settings properly ,There is nothing wrong in Config settgs.Guys pls help me out for this
Note; Uisng powershell script i have sending the mails using the SMTP server ,But in ssrs it is not working
Can you pls any one update this
Thanks!

Hi Yichinnari,
I have checked that your issue can be cause by you haven't uninstall the SSRS correctly, you mentioned that you just rename the ReportServer folder, this may cause the issue. You can backup this folder to some other path and then remove all the folder related
to the SSRS.
Please find details information below about how to do a Completely uninstall of SSRS.Recommendations
for Uninstalling & Installing Reporting Services
How to uninstall Reporting Services on SQL 2008 R2?
You mentioned that the error "Failure sending mail: The transport failed to connect to the server" when schedule the subscription still exists although you have done all the settings in the configuration file.
Please first make sure you have successfully reinstall the SSRS and the proper SMTP server is successfully configured and specified.
Then do some configuration in the Reporting Service configuration manager like below:
Finally, configure the rsreortserver.config file correctly.
More details information about the configuration:
How to: Configure a Report Server for E-mail Delivery (Reporting Services Configuration)
If you still got the same error message, please try to provide more details error message in the log files which path is like :
C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\LogFiles
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Similar Messages

Printing messages in Log File and Output File using Dbms_output.put_line

Hi,
I have a requirement of printing messages in log file and output file using dbms_output.put_line instead of fnd_file.put_line API.
Please let me know how can I achieve this.
I tried using a function to print messages and calling that function in my main package where ever there is fnd_file.put_line. But this approach is not required by the business.
So let me know how I can achieve this functionality.
Regards
Sandy

What is the requirement that doesn't allow you using fnd_file.put_line?
Please see the following links.
https://forums.oracle.com/forums/search.jspa?threadID=&q=Dbms_output.put_line+AND+Log+AND+messages&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=%22dbms_output.put_line+%22+AND+concurrent&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

I re-downloaded my Photoshop recently and Adobe Bridge no longer displays my Nikon NEF files and Camera Raw will not open them.

I re-downloaded my Photoshop recently and Adobe Bridge no longer displays my Nikon NEF files and Camera Raw will not open them. I get a message saying that Camera Raw does not support my camera type but it always has in the past. The bridge no longer shows the picture view of my NEF files. These are Nikon NEF files from the Nikon 5100 DSLR camera. How do I fix this?

I re-downloaded my Photoshop recently and Adobe Bridge no longer displays my Nikon NEF files and Camera Raw will not open them. I get a message saying that Camera Raw does not support my camera type but it always has in the past.
When you re-installed Photoshop, you also re-installed the version of Camera Raw which shipped with Photoshop - in other words you reverted to an older version of Camera Raw which does not support the D5100.
Camera Raw plug-in | Supported cameras
The D5100 was first supported in Camera Raw version 6.4.
In Photoshop, click Help > Updates to update Camera Raw.

Some PDF files and other emails do not display the whole page. Is there a way to change that?

Some PDF files and other emails do not display the whole page. Is there a way to change that?

If an app does not behave as expected, try closing the app completely and reboot the iPad. It appears as though you have the original iPad. It helps if you list your iPad model and the iOS that you are running.
Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Power book G4 Leopard 10.5.8. File sharing preference checked but not working after start up until unchecked and the rechecked?

I hope the title is enough info, please ask. In the mean time I have created an applescript to open preferences/ sharing and uncheck then check the file sharing box. This works but I would obviously prefer it just work normally. I have no corrupt preference files. Perhaps a file is missing? Thank you.

Greetings Kwnez
I'm not up to your level of expertise yet. I'm networking and file sharing too, on my Mac Powerbook 1.33 GHz PowerPC G4; OS 10.5.8 Lepoard. At the public library I found by asking the clerk a book Authored by David Pogue. "Mac OS X Leopard the Missing Manual". It (the book) has helped me ask better questions. I'm not saying that your question "
Power book G4 Leopard 10.5.8. File sharing preference checked but not working after start up until unchecked and the rechecked?
is hard for me to understand, I went to system preferences and looked at the sharing box. when I clik it it opens up and the first thing I see is my computers name, and under that i see, " Computers on your local network can access your computer at: ...-powerbook-g4-15.local"
What I'm saying is "Are we on the same Page"

[BUG] deploytk.dll file and activex control is NOT uninstalled

deploytk.dll file and activex control is NOT uninstalled, when you uninstall the latest JRE.
I have uninstalled the latest JRE, but the file deploytk.dll is still present in c:\windows\system32\ and the related activex control deploytk.dll 6.0.190.4 is loaded in IE8. Please fix this bug.
Windows Vista SP2

Unfortunately, it was *all* of my ActiveX controls that wouldn't load. That said, A user of the Info-LabVIEW list came up with the answer: reinstall the RunTime engine - wierd....
thanks,
Christopher
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

Diff between Log files and Trace files

hi
What is the exact differences between Log Files and Trace Files.
And the relevant informative URL/reference materils would be highly appriciated.
Thanks
Sekhar

Hi,
Go through these,
http://help.sap.com/saphelp_nw04/helpdata/en/d1/7b1e40777cdd5fe10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0bf8c890-0201-0010-8b8c-fc93fa1f4795
Hope it clarifies
Regards
Srinivasan T

8dot3 filenames not created for Program Files and Program Files (x86)

Interesting issue we are realizing on Servers deployed from SCCM 2012. 8dot3names are not created for Program Files and Program Files (x86). they are created for other files/folders at the root of C and below Program Files and Program Files (x86). This is
causing issues when programs are installed and the path is then created with 8dot3 filenames for program files and program files (x86)

Arg. we just got bitten by this "feature", and it's affecting our security software stack (name starts with M and ends with ee), and some ancient crud too.
And found this, which suggests a logical reason for 8dot3name to not be present on servers, but, on clients, I think it's a rather gross assumption...
http://blogs.technet.com/b/josebda/archive/2012/11/13/windows-server-2012-file-server-tip-disable-8-3-naming-and-strip-those-short-names-too.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

PS CS3 not recognizing Raw Files and converters Ive downloaded not working..Why not?

PS CS3 not recognizing Raw Files and converters Ive downloaded not working..Why not?

Do you seriously think we can answer that with zero information from you?
Please give us:
Operating System/version
Photoshop version number
Amount of RAM installed
Hard drive(s) free capacity
Video card make and model
Camera make and model
Then describe what you have done so far and the symptoms you are seeing.

I am trying to install the updates from Mac AppStore but it keeps aborting saying the it cannot verify the PreFlight File and that it's not signed by Apple. What is going on?

I am trying to install the updates from Mac AppStore but it keeps aborting saying the it cannot verify the PreFlight file and that it's not signed by Apple. What is going on?

Just attempted to run the update and still rec'd the same message. I also see that there are many others who are havig the exact same problem. How can I get Apple support to look at it?

Hi, I have downloaded some avi files and mov files. i am not getting audio while playing the movie. i tried to play with iTunes, QT, DivX player. but I am getting audio in mp4 files. can u help me to fix this

Hi, I have downloaded some avi files and mov files. i am not getting audio while playing the movie. i tried to play with iTunes, QT, DivX player. but I am getting audio in mp4 files. can u help me to fix this

First, back up all data and then uninstall "DivX" according to the developer's instructions.
Then try this:
VideoLAN - Download official VLC media player for Mac OS X

Why is my powerpoint not working 10.9? i can't play my existing file and new files that i work..? how to fix that one..? pls help..!

why is my powerpoint not working 10.9? i can't play my existing file and new files that i work..? how to fix that one..? pls help..!

R Cubss,
You might want to read down this thread. There are a lot of tips-n-tricks, and maybe one will be right for you.
http://www.adobeforums.com/webx/.59b6565c/43
Good luck,
Hunt

Import dimension and member via maxl, how to create data file and rule file

Hi
I have a task to import dimension and member into Essbase, for project requirement, I have to use text file or spreadsheet file.
I wonder which format can be imported into Essbase?
I tried to create them, failed.
Do you have any samples to help me? dimension file and rule file...
I search a lot in http://gerardnico.com/wiki/epm/essbase/dimension_build#about , but there are no samples.
Thanks in advance...
Best regards,
Samantha

import database Sample.Basic data from data_file 'C:\TEMP\GENREF.txt' using rules_file 'C:\TEMP\GENREF.rul' on error append to 'C:\TEMP\logs\dimbuild.log';Here issue is not with rulefile but in reading the rule file.
I hope rule file is in the database directory (By default it will get saved there only)
Try with the below command
import database Sample.Basic data from data_file 'C:\TEMP\GENREF.txt' using server rules_file 'GENREF' on error append to 'C:\TEMP\logs\dimbuild.log';
Rule file also had one issue
Market, Product, Measures, Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, DecHere I am seeing only four dimensions from the Sample.Basic database
Scenario is missing. So define Actual (Scenario Dimension member) in the rule file header definition.
All dimensions must be identified to parse one data file with rule file.
PS: Naming (GENREF) is also irrelevant if you are loading data. It is apt for dim load.

Hi all, need data file and co file after single transport in 6.4 or 6.7

hi all
following is the requirement
To process/compile the attached programs (given below) in 6.4/7 Kernel (SAP 6.4 version or 6.7 version )and send a single transport (Data File and Co File).
these data file and co file are flat files.
CAN ANYONE HELP ME GETTING THESE FLAT FILES. I need these flat files urgently.
WHAT U HAVE TO DO IS:
IF U HAVE 6.4 OR 6.7 VERSION, JUST TRANSPORT FOLLOWING 10 PROGRAMS IN SINGLE TRANSPORT IN TESTING SYSTEM OR DEVELOPEMENT SYSTEM AND AFTER GETTING DATA FILE AND CO FILE U CAN REVERT THE TRANSPORT.
Programs files are as follows: (total number of prog is 10)
1.
FUNCTION Z_3N_CKS_EXIST_USER .
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" VALUE(CKSMDTID) TYPE USR02-MANDT DEFAULT SY-MANDT
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
*" EXCEPTIONS
*" USER_DONT_EXIST
*" USER_EXISTS
FUNCTION TO CHECK IF USER EXISTS
CLEAR RCODE.
CALL FUNCTION 'USER_EXISTS'
EXPORTING
BNAME = CKSUSRID
CLIENT = CKSMDTID
EXCEPTIONS
USER_DONT_EXIST = 1
USER_EXISTS = 0.
RCODE = SY-SUBRC.
ENDFUNCTION.
2.
FUNCTION Z_3N_CKS_LOCKSTATE.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
FUNCTION TO OBTAIN THE CURRENT LOCK STATUS FOR A USER
*{ PASSGOAPR06
*\DATA:LOCKSTATE(50) type c,
*\C_LOCKED_BY_ADMIN like usr02-uflag.
*\tables:usr02.
DATA:LOCKSTATE(50) type c.
*} PASSGOAPR06
CLEAR: RCODE, LOCKSTATE.
SELECT SINGLE * FROM USR02 WHERE BNAME = CKSUSRID.
IF SY-SUBRC <> 0.
RCODE = 01. "No such User
EXIT.
ENDIF.
*{ PASSGOAPR06
IF USR02-UFLAG Z C_LOCKED_BY_ADMIN AND
USR02-UFLAG Z C_LOCKED_BY_FAILED_LOGON.
LOCKSTATE = 'UNLOCKED'.
RCODE = 00.
ELSE.
IF USR02-UFLAG O C_LOCKED_BY_FAILED_LOGON.
LOCKSTATE = 'LOCKED_BY_FAILED_LOGON'.
RCODE = 02.
ENDIF.
IF USR02-UFLAG O C_LOCKED_BY_ADMIN.
LOCKSTATE = 'LOCKED_BY_ADMIN'.
RCODE = 02.
ENDIF.
ENDIF.
uflag = usr02-uflag.
IF UFLAG Z C_LOCKED_BY_ADMIN AND
UFLAG Z C_LOCKED_BY_FAILED_LOGON.
LOCKSTATE = 'UNLOCKED'.
RCODE = 00.
ELSE.
IF UFLAG O C_LOCKED_BY_FAILED_LOGON.
LOCKSTATE = 'LOCKED_BY_FAILED_LOGON'.
RCODE = 02.
ENDIF.
IF UFLAG O C_LOCKED_BY_ADMIN.
LOCKSTATE = 'LOCKED_BY_ADMIN'.
RCODE = 02.
ENDIF.
ENDIF.
*} PASSGOAPR06
ENDFUNCTION.
3.
FUNCTION Z_3N_CKS_PWDCHG_INITIAL.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" VALUE(CKSUSRPWD) TYPE RSYST-BCODE
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
*" TABLES
*" RETURN STRUCTURE BAPIRET2
FUNCTION TO INITIALISE USERs PASSWORD, USER WILL BE FORCED
TO CHANGE PASSWORD ON NEXT LOGIN
CLEAR: USR02, RCODE.
SELECT SINGLE * from USR02 WHERE BNAME = CKSUSRID.
IF SY-SUBRC <> 0.
RCODE = 01.
else.
CALL FUNCTION 'BAPI_USER_CHANGE'
EXPORTING
USERNAME = CKSUSRID
PASSWORD = CKSUSRPWD
PASSWORDX = 'X'
TABLES
RETURN = RETURN.
loop at return.
if return-type eq 'E' or return-type eq 'A'.
rcode = 13.
endif.
endloop.
endif.
ENDFUNCTION.
4.
FUNCTION Z_3N_CKS_VERIFY_USER.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE RSYST-BNAME
*" VALUE(CKSUSRPWD) TYPE RSYST-BCODE OPTIONAL
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
FUNCTION TO VALIDATE A USER
*{ PASSGOAPR06
TABLES:USR02.
CLEAR: USR02, RCODE.
SELECT SINGLE * from USR02 WHERE BNAME = CKSUSRID.
IF SY-SUBRC = 4.
RCODE = 01. "no such user
EXIT.
ELSEIF CKSUSRPWD = SPACE.
RCODE = 03. "invalid old password
EXIT.
ELSE.
CALL FUNCTION 'SUSR_LOGIN_CHECK_RFC'
EXPORTING
BNAME = CKSUSRID
PASSWORD = CKSUSRPWD
EXCEPTIONS
WAIT = 1
USER_LOCKED = 2
USER_NOT_ACTIVE = 3
PASSWORD_EXPIRED = 4
WRONG_PASSWORD = 5
NO_CHECK_FOR_THIS_USER = 6
INTERNAL_ERROR = 7
OTHERS = 8
CASE SY-SUBRC.
WHEN '2'. RCODE = 02. "user disabled/blocked
WHEN '3'. RCODE = 02. "user disabled/blocked
WHEN '4'. RCODE = 03. "invalid old password
WHEN '5'. RCODE = 03. "invalid old password
WHEN '8'. RCODE = 12. "internal error
ENDCASE.
ENDIF.
*} PASSGOAPR06
ENDFUNCTION.
5.
*& Include ZMS01JTOP *
PROGRAM MS01JTOP MESSAGE-ID 01 LINE-SIZE 132. "Berechtigungsdatenpflege
13.08.93
INCLUDE MS01CTP2.
INCLUDE MS01CTCO.
TABLES: XU200, XU213, XU310, XU350, XU390, XU400.
TABLES: TSTC, TSP03, TPARA, TPARAT.
TABLES: *USR01, *USR03, USR15.
TABLES: SOUD, SOUD3.
*ABLES: ZCSA, ADRS.
*{ PASSGOAPR06
TABLES: usr02.
DATA: uflag type x.
DATA: begin of return occurs 0.
INCLUDE structure bapiret2.
DATA: end of return.
DATA calling_cksusrid like usr02-bname.
DATA: init_pass like BAPIPWD.
INCLUDE USER_CONSTANTS.
*} PASSGOAPR06
CONTROLS TC213 TYPE TABLEVIEW USING SCREEN 213.
CONTROLS TC520 TYPE TABLEVIEW USING SCREEN 350.
DATA: COPYOK TYPE I,
RENAMEOK TYPE I,
DATFM1,
DATFM2,
DATFM3,
DATFM4,
DCPFM1,
DCPFM2,
USERNAME LIKE USR01-BNAME,
LOCK,
UNLO,
STATFLAG TYPE I VALUE 0,
NAVIFLAG TYPE I VALUE 0,
PARTOPIX TYPE I,
PARFILL TYPE I,
PARAMETER LIKE USR05-PARVA,
PARID LIKE USR05-PARID,
PARLOOP LIKE SY-STEPL,
SHOW_ONLY VALUE ' ',
INTPRO_LOADED TYPE I VALUE 0,
EXT_SECURITY VALUE ' '.
DATA: H_201_USGRP LIKE USGRP-USERGROUP,
H_201_VALID TYPE C,
CC201 LIKE SY-CUCOL VALUE 2,
CR201 LIKE SY-CUROW VALUE 6,
SAVE_LINE201 LIKE SY-LILLI VALUE 1,
SAVE_LSIND201 LIKE SY-LSIND VALUE 1.
DATA: OFFICENAME LIKE SOUD-USRNAM.
DATA: BEGIN OF NAME_IN.
INCLUDE STRUCTURE SOUD3.
DATA: END OF NAME_IN.
DATA: BEGIN OF NAME_OUT.
INCLUDE STRUCTURE SOUD3.
DATA: END OF NAME_OUT.
DATA: BEGIN OF EMPTYPROF OCCURS 2.
INCLUDE STRUCTURE USREF.
DATA: END OF EMPTYPROF.
DATA: BEGIN OF PROFILES OCCURS 10.
INCLUDE STRUCTURE USREF.
DATA: END OF PROFILES.
DATA: MAXPAR TYPE I VALUE 300.
DATA: BEGIN OF TABPAR OCCURS 300,
PARID LIKE USR05-PARID,
PARVA LIKE USR05-PARVA,
END OF TABPAR.
DATA: BEGIN OF DELTAB OCCURS 50,
USGRP LIKE USR02-CLASS,
END OF DELTAB.
DATA: BEGIN OF ADDTAB OCCURS 50,
USGRP LIKE USR02-CLASS,
END OF ADDTAB.
DATA: BEGIN OF ADDRESS_DATA.
INCLUDE STRUCTURE SADRP_USR.
DATA: END OF ADDRESS_DATA.
DATA:
CLEAR TYPE X VALUE '00'.
*ATA: BEGIN OF ADRSDATEN.
INCLUDE STRUCTURE ADRS.
*ATA: END OF ADRSDATEN.
06.10.95 Tosun
DATA 930_FLAG.
"$$
6.
FUNCTION Z_3N_CKS_LOCK_USER.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
CLEAR RCODE.
*{ PASSGOAPR06
*\ PERFORM LOCK_USER IN PROGRAM ZSAPMS01J USING CKSUSRID.
*\ IF SY-SUBRC <> 0.
*\ RCODE = SY-SUBRC.
*\ EXIT.
*\ ELSE.
*\ COMMIT WORK.
*\ ENDIF.
the report (form) is dumping.
so we try it with the correct BAPI
CALL FUNCTION 'BAPI_USER_LOCK'
EXPORTING
USERNAME = CKSUSRID
TABLES
RETURN = return
IF return-type <> 'S'.
RCODE = '8'.
rollback work.
EXIT.
ENDIF.
*} PASSGOAPR06
ENDFUNCTION.
7.
FUNCTION Z_3N_CKS_PWDCHG_DIRECT.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" VALUE(CKSUSRPWD) TYPE RSYST-BCODE
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
*" TABLES
*" RETURN STRUCTURE BAPIRET2
FUNCTION TO CHANGE USERs PASSWORD
Password is initialised to a fixed value,
to avoid having to provide the valid old password
If the password change fails, the change is
rolled back - this is required because
BAPI_USER_CHANGE does an internal commit.
CLEAR: USR02, RCODE.
DATA: L_TIME LIKE SY-UZEIT,
ZLIN TYPE I.
*{ PASSGOAPR06
calling_cksusrid = cksusrid. "Save calling userid
init_pass = 'INITPASS'.
*} PASSGOAPR06
do 1 times.
SELECT SINGLE * from USR02 WHERE BNAME = CKSUSRID.
IF SY-SUBRC <> 0.
RCODE = 1.
else.
* Change login to initpass.
CALL FUNCTION 'BAPI_USER_CHANGE'
EXPORTING
USERNAME = CKSUSRID
*{ PASSGOAPR06
*\ PASSWORD = 'INITPASS'
PASSWORD = init_pass
*} PASSGOAPR06
PASSWORDX = 'X'
TABLES
RETURN = RETURN.
* Evaluate return table, if not success, rcode = 13
describe table return lines zlin.
IF zlin > 0.
IF return-type ne 'S'.
rcode = 13.
exit.
ENDIF.
ENDIF.
* Wait 1 second, otherwise table ush02 gets the same key as before.
* Not very good, but its the only way, because the wait up to
* statement includes a db-commit.
L_TIME = sy-uzeit.
WHILE L_TIME = sy-uzeit.
GET TIME.
ENDWHILE.
* Change 'INITPASS' to input login
CALL FUNCTION 'SUSR_USER_CHANGE_PASSWORD_RFC'
EXPORTING
BNAME = CKSUSRID
PASSWORD = 'INITPASS'
NEW_PASSWORD = CKSUSRPWD
NEW_BCODE = '0000000000000000'
NEW_CODVN = ' '
EXCEPTIONS
CHANGE_NOT_ALLOWED = 1
PASSWORD_NOT_ALLOWED = 2
INTERNAL_ERROR = 3
CANCELED_BY_USER = 4
OTHERS = 5.
case sy-subrc.
when '0'. rcode = 0.
when '1'. rcode = 2.
when '2'. rcode = 4.
when '3'. rcode = 12.
when '4'. rcode = 2.
when '5'. rcode = 12.
ENDCASE.
ENDIF.
exit. "end of do 1 times "
enddo.
* rollback if it didn't work
if not rcode is initial.
rollback work.
endif.
ENDFUNCTION.
8.
FUNCTION Z_3N_CKS_UNLOCK_USER.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
CLEAR RCODE.
*{ PASSGOAPR06
*\ PERFORM UNLOCK_USER IN PROGRAM ZSAPMS01J USING CKSUSRID.
*\ IF SY-SUBRC <> 0.
*\ RCODE = SY-SUBRC.
*\ EXIT.
*\ ELSE.
*\ COMMIT WORK.
*\ ENDIF.
the report (form) is dumping.
so we try it with the correct BAPI
CALL FUNCTION 'BAPI_USER_UNLOCK'
EXPORTING
USERNAME = CKSUSRID
TABLES
RETURN = return
IF return-type <> 'S'.
RCODE = '8'.
rollback work.
EXIT.
ENDIF.
*} PASSGOAPR06
ENDFUNCTION.
9.
*& Include ZMS01JO10 *
MS01JO10 Module before Output
14.05.93
MODULE D150_SELECT *
Einen Eintrag aus der Liste uebernehmen. *
MODULE D150_SELECT OUTPUT.
IF SELE = 1.
IF SY-LILLI < 3.
MESSAGE S209.
ELSE.
IF USRFLAG = 10 AND SY-LILLI = 3.
MESSAGE S209.
ELSE.
IF USRFLAG = 10.
XU150-VON = SY-LISEL.
ELSE.
COUNTX = PUSR - 1.
ASSIGN SY-LISEL+COUNTX(12) TO <TEXT>. " unicode
WRITE <TEXT> TO XU150-VON.
ENDIF.
ENDIF.
ENDIF.
SELE = 0.
ENDIF.
IF FERTIG = 2.
FCODE = 'BACK'.
SUPPRESS DIALOG.
ENDIF.
ENDMODULE.
MODULE D150_SETSTATUS *
PF-Status setzen *
MODULE D150_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 150.
XU150-SELPROF = XU150-SELFEST = XU150-SELADRE = XU150-SELPARA = 'X'.
XU150-SELMENU = 'X'.
ENDMODULE.
MODULE D155_SETSTATUS *
PF-Status setzen *
MODULE D155_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 155.
ENDMODULE.
MODULE D200_SELECT *
Einen Eintrag aus der Liste ins Dynpro uebernehmen *
MODULE D200_SELECT OUTPUT.
IF SELE = 1.
IF SY-LILLI < 3.
MESSAGE S209.
ELSE.
XU200-XUSER = SY-LISEL.
ENDIF.
SELE = 0.
ENDIF.
IF FCODE2 = 'USER' OR FCODE2 = 'FEST' OR FCODE2 = 'ADRE' OR
FCODE2 = 'PARA' OR FCODE2 = 'ADMI' OR FCODE2 = 'RESE' OR
FCODE2 = 'N '.
SUPPRESS DIALOG.
ENDIF.
PERFORM SET_STATUS USING 200.
ENDMODULE.
MODULE D213_VALOUT *
Festwerte auf das Dynpro schreiben. *
MODULE D213_VALOUT OUTPUT.
DEL = 0.
XU213-DIA = '.'.
XU213-ODC = '.'.
XU213-BDC = '.'.
XU213-CPIC = '.'.
XU213-BATCH = '.'.
CASE USR02-USTYP.
WHEN TYPDIA.
XU213-DIA = 'X'.
WHEN TYPBATCH.
XU213-BATCH = 'X'.
WHEN TYPCPIC.
XU213-CPIC = 'X'.
WHEN TYPBDC.
XU213-BDC = 'X'.
WHEN TYPODC.
XU213-ODC = 'X'.
ENDCASE.
IF USR02-LTIME <> SPACE AND USR02-LTIME <> '000000'.
LOOP AT SCREEN.
CASE SCREEN-GROUP1.
WHEN 'MOD'.
SCREEN-INVISIBLE = '1'.
SCREEN-INPUT = '0'.
MODIFY SCREEN.
ENDCASE.
ENDLOOP.
SET CURSOR FIELD 'USR02-CLASS'.
IF F <> ' ' AND L <> 0.
SET CURSOR FIELD F LINE L.
ENDIF.
CODEFLAG = 1.
ELSE.
CLEAR XU213-BCODE.
CLEAR XU213-BCODE2.
IF USR02-BCODE <> '0000000000000000' AND BCODE_C = SPACE.
CODEFLAG = 0.
ENDIF.
IF CODEFLAG = -2.
SET CURSOR FIELD 'XU213-BCODE'.
MESSAGE S290.
ELSE.
SET CURSOR FIELD 'USR02-CLASS'.
IF F <> ' ' AND L <> 0.
SET CURSOR FIELD F LINE L.
ENDIF.
ENDIF.
ENDIF.
ENDMODULE.
MODULE D213_SELECT *
Einen Eintrag aus der Liste uebernehmen. *
MODULE D213_SELECT OUTPUT.
IF SELE = 1.
IF SY-LILLI < 4.
MESSAGE S209.
ELSE.
ASSIGN SY-LISEL(PROFLNG) TO <TEXT>.
MOVE <TEXT> TO XU213-PROFILE.
PERFORM AUTH_CHECK USING OBJ_PROF
XU213-PROFILE SPACE ACT_INCLUDE RC.
IF RC <> 0.
MESSAGE S478 WITH XU213-PROFILE.
ELSE.
FOUND = 0.
LOOP AT TABUSR.
IF TABUSR-PROFILE = XU213-PROFILE.
FOUND = 1.
MESSAGE S268 WITH XU213-PROFILE.
EXIT.
ENDIF.
ENDLOOP.
IF FOUND = 0.
PERFORM EXIST_USR10
USING XU213-PROFILE AKTIVATED SPACE RC.
CLEAR TABUSR.
TABUSR-PROFILE = XU213-PROFILE.
IF USR10-TYP = COLECTPROF.
TABUSR-SAMPROF = 'X'.
ENDIF.
Profiletext lesen
CLEAR USR11.
SELECT SINGLE * FROM USR11
WHERE LANGU = SY-LANGU
AND PROFN = TABUSR-PROFILE
AND AKTPS = AKTIVATED.
TABUSR-PTEXT = USR11-PTEXT.
APPEND TABUSR.
XU213-FILL = XU213-FILL + 1.
IF XU213-FILL >= MAXUSR.
MESSAGE S269.
ENDIF.
UCHANGE = 1.
PERFORM NOTSAVED.
ENDIF.
ENDIF.
ENDIF.
SELE = 0.
ENDIF.
PERFORM SET_STATUS USING 213.
PERFORM MESSAGE.
IF EXT_SECURITY <> '1'.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'EXT'.
SCREEN-INPUT = '0'.
SCREEN-INVISIBLE = '1'.
SCREEN-ACTIVE = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDMODULE.
MODULE D213_PROFOUT *
Profiles auf den Bildschirm ausgeben. *
MODULE D213_PROFOUT OUTPUT.
include <symbol>.
COUNTX = XU213-TOPIX + SY-STEPL - 1. "Bild-oben-Pos. in Tab. feststell
IF COUNTX <= XU213-FILL. "Am Ende der Tabelle ?
READ TABLE TABUSR INDEX COUNTX. "Tab. lesen
IF SY-SUBRC = 0.
MOVE-CORRESPONDING TABUSR TO XU213. "Daten auf den Bildschirm
xu213-samprof = sym_documents.
ENDIF.
ENDIF.
USRLOOP = SY-LOOPC.
ENDMODULE.
MODULE D254_SUPPRESS *
Dialog fuer Dynpro 254 unterdruecken *
MODULE D254_SUPPRESS OUTPUT.
SUPPRESS DIALOG.
ENDMODULE.
MODULE D310_SETSTATUS *
PF-Status setzen *
MODULE D310_SETSTATUS OUTPUT.
IF SHOW_ONLY = SPACE.
PERFORM SET_STATUS USING 310.
IF STATFLAG = 1.
LOOP AT SCREEN.
IF SCREEN-NAME = 'USR01-CATTKENNZ '.
AUTHORITY-CHECK OBJECT 'S_DEVELOP'
ID 'DEVCLASS' DUMMY
ID 'OBJTYPE' FIELD 'SCAT'
ID 'OBJNAME' DUMMY
ID 'P_GROUP' DUMMY
ID 'ACTVT' FIELD '70'.
IF SY-SUBRC <> 0.
SCREEN-INPUT = 0.
SCREEN-INVISIBLE = 1.
MODIFY SCREEN.
ENDIF.
ENDIF.
ENDLOOP.
ENDIF.
ELSE.
PERFORM SET_STATUS USING 330.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'RO '.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
CLEAR FCODE.
ENDMODULE.
MODULE D310_FORMAT_OUT. *
Datumsformat und Dezimalpunktformat entsprechend Daten aus usr01 *
ankreuzen. *
MODULE D310_FORMAT_OUT OUTPUT.
XU310-DATFM1 = ' '.
XU310-DATFM2 = ' '.
XU310-DATFM3 = ' '.
XU310-DATFM4 = ' '.
XU310-DATFM5 = ' '.
XU310-DCPFM1 = ' '.
XU310-DCPFM2 = ' '.
XU310-SPDB1 = ' '.
XU310-SPDA1 = ' '.
IF USR01-DATFM < 1 OR USR01-DATFM > 5.
CALL 'C_SAPGPARAM'
ID 'NAME' FIELD 'zcsa/moddatfm'
ID 'VALUE' FIELD USR01-DATFM.
ENDIF.
CASE USR01-DATFM.
WHEN 1.
XU310-DATFM1 = 'X'.
WHEN 2.
XU310-DATFM2 = 'X'.
WHEN 3.
XU310-DATFM3 = 'X'.
WHEN 4.
XU310-DATFM4 = 'X'.
WHEN 5.
XU310-DATFM5 = 'X'.
WHEN OTHERS.
XU310-DATFM1 = 'X'.
ENDCASE.
IF USR01-DCPFM = ' '.
XU310-DCPFM1 = 'X'.
ELSE.
XU310-DCPFM2 = 'X'.
ENDIF.
IF USR01-SPDB = 'G'.
XU310-SPDB1 = 'X'.
ENDIF.
IF USR01-SPDA = 'D'.
XU310-SPDA1 = 'X'.
ENDIF.
CLEAR TSP03.
SELECT SINGLE * FROM TSP03
WHERE PADEST = USR01-SPLD.
ENDMODULE.
MODULE D320_SETSTATUS *
PF-Status setzen *
MODULE D320_SETSTATUS OUTPUT.
IF SHOW_ONLY = SPACE.
PERFORM SET_STATUS USING 320.
ELSE.
PERFORM SET_STATUS USING 340.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'RO '.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
CLEAR FCODE.
ENDMODULE.
MODULE D330_SETSTATUS *
PF-Status setzen *
MODULE D330_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 330.
ENDMODULE.
MODULE D340_SETSTATUS *
PF-Status setzen *
MODULE D340_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 340.
ENDMODULE.
MODULE D350_SETSTATUS *
PF-Status setzen *
MODULE D350_SETSTATUS OUTPUT.
IF SELE = 1.
IF SY-LILLI < 3.
MESSAGE S209.
ELSE.
TABPAR-PARID = SY-LISEL.
APPEND TABPAR.
PARFILL = PARFILL + 1.
ENDIF.
SELE = 0.
ENDIF.
IF SHOW_ONLY = SPACE.
PERFORM SET_STATUS USING 350.
ELSE.
PERFORM SET_STATUS USING 360.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'RO '.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
CLEAR FCODE.
ENDMODULE.
MODULE D350_PAROUT *
Parameter auf den Bildschirm ausgeben. *
MODULE D350_PAROUT OUTPUT.
COUNTX = PARTOPIX + SY-STEPL - 1. "Bild-oben-Pos. in Tab. feststell
IF COUNTX <= PARFILL. "Am Ende der Tabelle ?
READ TABLE TABPAR INDEX COUNTX. "Tab. lesen
IF SY-SUBRC = 0.
MOVE-CORRESPONDING TABPAR TO XU350. "Daten auf den Bildschirm
SELECT SINGLE * FROM TPARAT
WHERE SPRACHE = SY-LANGU
AND PARAMID = TABPAR-PARID.
ENDIF.
ENDIF.
PARLOOP = SY-LOOPC.
ENDMODULE.
MODULE D351_SETSTATUS *
PF-Status setzen *
*ODULE D351_SETSTATUS OUTPUT.
IF SELE = 1.
IF SY-LILLI < 3.
MESSAGE S209.
ELSE.
XU350-PARID = SY-LISEL.
ENDIF.
SELE = 0.
ENDIF.
PERFORM SET_STATUS USING 352.
SUPPRESS DIALOG.
*NDMODULE.
MODULE D360_SETSTATUS *
PF-Status setzen *
MODULE D360_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 360.
ENDMODULE.
MODULE D390_STATUS *
PF-Status setzen. *
MODULE D390_STATUS OUTPUT.
data uflag_x type x. " unicode
SELECT SINGLE * FROM USR02
WHERE BNAME = XU200-XUSER.
uflag_x = USR02-UFLAG. " unicode
IF SY-SUBRC <> 0.
XU390-STATTEXT = ' Nicht vorhanden.'(222).
ELSE.
IF uflag_x Z YULOCK AND uflag_x Z YUSLOC. " unicode
PERFORM SET_STATUS USING 390.
XU390-STATTEXT = ' Nicht gesperrt. '(223).
ELSE.
IF uflag_x O YULOCK. " unicode
PERFORM SET_STATUS USING 391.
XU390-STATTEXT = ' Durch Falschanmeldungen gesperrt !!!'(224).
ENDIF.
IF uflag_x O YUSLOC. " unicode
PERFORM SET_STATUS USING 391.
XU390-STATTEXT = ' Durch Systemmanager gesperrt !!!'(225).
ENDIF.
ENDIF.
ENDIF.
LOCK = '.'.
UNLO = '.'.
ENDMODULE.
MODULE D400_CLEAR_CODE *
Passwortfeld loeschen. *
MODULE D400_CLEAR_CODE OUTPUT.
CLEAR XU400-NEWCODE.
CLEAR XU400-NEWCODE1.
ENDMODULE.
MODULE D400_SETSTATUS *
PF-Status setzen *
MODULE D400_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 400.
ENDMODULE.
MODULE D500_SUPPRESS *
Dynpro unterdruecken *
MODULE D500_SUPPRESS OUTPUT.
SET PF-STATUS '0200'.
SUPPRESS DIALOG.
ENDMODULE.
*& Module D214_SETSTATUS OUTPUT
MODULE D214_SETSTATUS OUTPUT.
SET PF-STATUS '0214'.
SET TITLEBAR '214'.
ENDMODULE. " D214_SETSTATUS OUTPUT
*& Module D216_PROFOUT OUTPUT
MODULE D216_PROFOUT OUTPUT.
COUNTX = XU213-TOPIX2 + SY-STEPL - 1. "Bild-oben-Pos. in Tab. festst
IF COUNTX <= XU213-FILL2. "Am Ende der Tabelle ?
READ TABLE INTPRO2 INDEX COUNTX. "Tab. lesen
IF SY-SUBRC = 0.
MOVE-CORRESPONDING INTPRO2 TO XU213. "Daten auf den Bildschirm
ENDIF.
ENDIF.
ENDMODULE. " D216_PROFOUT OUTPUT
*& Module D504_STATUS OUTPUT
MODULE D504_STATUS OUTPUT.
SET PF-STATUS '0504'.
SET TITLEBAR '604'.
ENDMODULE. " D504_STATUS OUTPUT
*& Module D217_SETSTATUS
MODULE D217_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 217.
PERFORM MESSAGE.
IF FERTIG = -1.
SUPPRESS DIALOG.
ENDIF.
ENDMODULE. " D217_SELECT OUTPUT
*& Module D202_SETSTATUS OUTPUT
text *
MODULE D202_SETSTATUS OUTPUT.
SET PF-STATUS '0203'.
SET TITLEBAR '203'.
ENDMODULE. " D202_SETSTATUS OUTPUT
*& Module D200_LESEN_MEMORY OUTPUT
Schnittstelle mit RSUSR008
call transaction su01 and skip first screen
MODULE D200_LESEN_MEMORY OUTPUT.
IMPORT FCODE FROM MEMORY ID 'OK_CODE'.
EXPORT FCODE FROM SPACE TO MEMORY ID 'OK_CODE'.
ENDMODULE. " D200_LESEN_MEMORY OUTPUT
"$$
10.
*& Report ZSAPMS01J *
23.10.92
set extended check off.
INCLUDE ZMS01JTOP.
*INCLUDE MS01JTOP. "Datendeklarationen
INCLUDE ZMS01JO10.
*INCLUDE MS01JO10. "PBO-Module
*INCLUDE ZMS01JI10.
INCLUDE MS01JI10. "PAI-Module
*INCLUDE ZMS01JF10.
INCLUDE MS01JF10. "Forms
*INCLUDE ZMS01JR10.
INCLUDE MS01JR10. "Reporting
*INCLUDE ZMS01CC10.
INCLUDE MS01CC10. "Checks
*INCLUDE ZMS01CD10.
INCLUDE MS01CD10. "Datenzugriffe
set extended check on.
see there are in total 10 prog that should go in one trasport order. this will creat data file and co file. these are flat files. i want these flat files.
do it in developement server or testing server and then delete it or revert it once you get data file or co file.
i will greatful to u if you could send me these flat files.
thanx in advance
raj

hi all,
this can be done in 4.6 version also.
thanx for spending time on this.
thanx&regards
raj

How can i make shorten systemlog files and joblog files on OS

Hello
How can i make shorten systemlog files and joblog files on OS

Hello Jan,
You can limit the size of system log.
The size of the application server's System Log is determined by the
following SAP profile parameters. Once the current System Log reaches
the maximum file size, it gets moved to the old_file and and a new
System Log file gets created. The number of past days messages in the
System Log depends on the amount/activity of System Log messages and the
max file size. Once messages get rolled off the current and old files,
they are no longer retrievable.
rslg/local/file /usr/sap/<SID>/D*/log/SLOG<SYSNO>
rslg/local/old_file /usr/sap/<SID>/D*/log/SLOGO<SYSNO>
rslg/max_diskspace/local 1000000
rslg/central/file /usr/sap/<SID>/SYS/global/SLOGJ
rslg/central/old_file /usr/sap/<SID>/SYS/global/SLOGJO
rslg/max_diskspace/central
Refer to http://help.sap.com/saphelp_nw70/helpdata/EN/c7/69bcbaf36611d3a6510000e835363f/content.htm
for explanation of profile parameters.you can reduce the size of system log using rslg/max_diskspace_local and rslg/max_diskspace_central
But you can't reduce the size of job log files on OS
Rohit

Log files and RSconfig file is not creatd after Reinstall the SSRS part?

Similar Messages

Maybe you are looking for